Dino Celli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dino Celli has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Onome Scott-Emuakpor
Air Force Research Laboratory, Aerospace Systems Directorate , Wright-Patterson AFB, OH 45433
4 shared publications - Tommy George
Mem. ASME Air Force Research Laboratory, Aerospace Systems Directorate, Wright-Patterson AFB, OH 45433
4 shared publications - M. -H. Herman Shen
Professor Fellow ASME Department of Mechanical and Aerospace Engineering, The Ohio State University, 201 W. 19th Avenue, Columbus, OH 43210
3 shared publications - Casey Holycross
Air Force Research Laboratory, Aerospace Systems Directorate, Wright-Patterson AFB, OH 45433
2 shared publications Onome Scott-Emuakpor
Air Force Research Laboratory
2 shared publicationsTommy George
Air Force Research Laboratory
2 shared publications
Latest Publications
- Open Access
- 16 July 2021
- Published by ASME International
Modal Validation of Academic Bladed Disk Using Digital Image Correlation
Determining the modal response of integrally bladed rotors (IBRs), or bladed disks (blisks), is critical within the aerospace industry. Specifically for gas turbine engines, experimentally measuring the modal response of a physical IBR is a critical step in determining optimal operating conditions and maintenance schedules. Currently, traveling wave excitation (TWE) is a state of
- 16 July 2021
- Published by ASME International
Open AccessModal Validation of Academic Bladed Disk Using Digital Image Correlation
Determining the modal response of integrally bladed rotors (IBRs), or bladed disks (blisks), is critical within the aerospace industry. Specifically for gas turbine engines, experimentally measuring the modal response of a physical IBR is a critical step in determining optimal operating conditions and maintenance schedules. Currently, traveling wave excitation (TWE) is a state of
- Open Access
- 16 July 2021
- Published by ASME International
Rapid Characterization of Fatigue Performance With Application to Additive Manufactured Components
This paper aims to provide a fatigue life prediction method that can concurrently approximate both SN behavior as well as the inherent variability of fatigue. Variability of fatigue is approximated efficiently with a limited number of experimental tests using a simplified energy based fatigue life prediction method or “Two Point” method. The purpose of such a tool is for the
- 16 July 2021
- Published by ASME International
Open AccessRapid Characterization of Fatigue Performance With Application to Additive Manufactured Components
This paper aims to provide a fatigue life prediction method that can concurrently approximate both SN behavior as well as the inherent variability of fatigue. Variability of fatigue is approximated efficiently with a limited number of experimental tests using a simplified energy based fatigue life prediction method or “Two Point” method. The purpose of such a tool is for the
- 29 September 2020
- Published by Springer Nature
- p. 37-43
Fatigue Assessment of Porosity in Electron Beam Melted Ti-6Al-4V
- 29 September 2020
- Published by Springer Nature
- p. 37-43
Fatigue Assessment of Porosity in Electron Beam Melted Ti-6Al-4V
- 29 September 2020
- Published by Springer Nature
- p. 61-64
Modal Validation of Academic Bladed Disk with DIC
- 29 September 2020
- Published by Springer Nature
- p. 61-64
Modal Validation of Academic Bladed Disk with DIC
- 3 February 2020
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 142 (3)
Stochastic Fatigue Life Prediction Based on a Reduced Data Set
The aim of this paper is to provide a novel stochastic life prediction approach capable of predicting the total fatigue life of applied uniaxial stress states from a reduced dataset reliably and efficiently. A previously developed strain energy-based fatigue life prediction method is integrated with the stochastic state space approach for prediction of total cycles to failure. The approach under consideration for this study is the Monte Carlo method (MCM) where input is randomly generated to approximate the output of highly complex systems. The strain energy fatigue life prediction method is used to first approximate SN behavior from a set of two SN data points. This process is repeated with another unique set of SN data points to evaluate and approximate distribution of cycles to failure at a given stress amplitude. Uniform, normal, log-normal, and Weibull distributions are investigated. From the MCM, fatigue data are sampled from the approximated distribution and an SN curve is generated to predict high cycle fatigue (HCF) behavior from low cycle fatigue (LCF) data.
- 3 February 2020
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 142 (3)
Stochastic Fatigue Life Prediction Based on a Reduced Data Set
The aim of this paper is to provide a novel stochastic life prediction approach capable of predicting the total fatigue life of applied uniaxial stress states from a reduced dataset reliably and efficiently. A previously developed strain energy-based fatigue life prediction method is integrated with the stochastic state space approach for prediction of total cycles to failure. The approach under consideration for this study is the Monte Carlo method (MCM) where input is randomly generated to approximate the output of highly complex systems. The strain energy fatigue life prediction method is used to first approximate SN behavior from a set of two SN data points. This process is repeated with another unique set of SN data points to evaluate and approximate distribution of cycles to failure at a given stress amplitude. Uniform, normal, log-normal, and Weibull distributions are investigated. From the MCM, fatigue data are sampled from the approximated distribution and an SN curve is generated to predict high cycle fatigue (HCF) behavior from low cycle fatigue (LCF) data.
- 22 July 2019
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (9)
Measurement of Hysteresis Energy Using Digital Image Correlation With Application to Energy-Based Fatigue Life Prediction
A modified experimental method using digital image correlation (DIC), a noncontact optical method for measuring full-field displacements and strains, is used to interrogate accumulated fatigue damage for low and high cycle fatigue at continuum scales. Previous energy-based fatigue life prediction methods have shown that cyclic strain energy dissipated during fatigue acts as a key damage parameter for accurate determination of total and remaining fatigue life. DIC enables the collection of accurate strain energy measurements or damaging energy of complex geometries that would otherwise be exceedingly difficult and time consuming using traditional strain measurement techniques. Thus, the use of DIC to obtain strain energy measurements of gas turbine engine (GTE) components is highly advantageous for energy-based fatigue life prediction methods. Presented in this study is the experimental characterization of the cyclic strain energy dissipation as a means of predicting fatigue performance and assessment of damage progression of Aluminum 6061 subjected to fully reversed axial fatigue loading utilizing DIC. Validation of total and cyclic strain energy dissipation DIC measurements is accomplished with the simultaneous use of axial extensometery for direct comparison and implementation to strain energy-based life prediction methods.
- 22 July 2019
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (9)
Measurement of Hysteresis Energy Using Digital Image Correlation With Application to Energy-Based Fatigue Life Prediction
A modified experimental method using digital image correlation (DIC), a noncontact optical method for measuring full-field displacements and strains, is used to interrogate accumulated fatigue damage for low and high cycle fatigue at continuum scales. Previous energy-based fatigue life prediction methods have shown that cyclic strain energy dissipated during fatigue acts as a key damage parameter for accurate determination of total and remaining fatigue life. DIC enables the collection of accurate strain energy measurements or damaging energy of complex geometries that would otherwise be exceedingly difficult and time consuming using traditional strain measurement techniques. Thus, the use of DIC to obtain strain energy measurements of gas turbine engine (GTE) components is highly advantageous for energy-based fatigue life prediction methods. Presented in this study is the experimental characterization of the cyclic strain energy dissipation as a means of predicting fatigue performance and assessment of damage progression of Aluminum 6061 subjected to fully reversed axial fatigue loading utilizing DIC. Validation of total and cyclic strain energy dissipation DIC measurements is accomplished with the simultaneous use of axial extensometery for direct comparison and implementation to strain energy-based life prediction methods.