V. M. Sizyakov
Research Subjects
V. M. Sizyakov has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Vyacheslav Nikolayevich Brichkin
St. Petersburg Mining University
3 shared publications - A. T. Fedorov
St Petersburg Min Univ, Met Dept, St Petersburg, Russia
1 shared publication D. G. Chistyakov
1 shared publicationD. I. Artyushevskiy
1 shared publicationE. A. Spetsov
1 shared publication- E. S. Gorlanov
Empress Catherine II St Petersburg Min Univ, Sci Ctr Problems Proc Mineral & Technogen Resource, St Petersburg, Russia
1 shared publication
Latest Publications
- 30 June 2025
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 1,p. 10-17
Synthesis, properties and applications of complex calcium aluminates and hydroaluminates
Modern technologies for the processing of aluminium-containing raw materials invariably pose questions regarding the composition and properties of complex calcium aluminates, the practical significance of which not only remains within the existing technological processes for producing binding compositions, but also develops inconnection with the complex processing of aluminosilicate raw materials and the potential for their individual synthesis for obtaining new types of by-products. In this connection the task of the performed research was to determine the composition and properties of calcium hydrocarboaluminate (CHCA) during its obtaining using alumina production solutions, depending on the nature of the alkali metal cation in the Na2O(K2O) – CaO – Al2O3 – CO2 – H2O system. The performed works included the laboratory synthesis of calcium hydrocarboaluminates, in relation to the conditions of aluminosilicate raw materials processing by sintering. The obtained samples were subjected to a range of analytical methods, including differential thermal analysis, X-ray phase and X-ray fluorescence analysis, laser microanalysis and electron microscopy. Noticeable differences in the laboratory synthesis of CHCA based on sodium and potassium aluminate solutions in terms of the degree of conversion of calcium oxide into CHCA and its yield, the content of CHCA in the precipitate and its stoichiometry with CO2 saturation from 0.79 to 0.62 mol, respectively, and for the industrial sample 0.45 mol, as a result of changes in the physicochemical and technological conditions of synthesis, have been established. The efficacy of utilising a complex physicochemical analysis of calcium aluminates, predicated on the determination and consideration of the phase composition of the precipitate and the characteristic chemical alterations of the system during the interaction of the lime component with the aluminate solution, is demonstrated. This approach, based on the findings of chemical, X-ray phase and combined thermal analysis, facilitates the determination of the material composition of multicomponent precipitates and the stoichiometry of CHCA. The present work was carried out with the support of the International Competence Centre for Mining Engineering Education under the auspices of UNESCO under the project “Science”, St. Petersburg, Russia.
- 30 June 2025
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 1,p. 10-17
Synthesis, properties and applications of complex calcium aluminates and hydroaluminates
Modern technologies for the processing of aluminium-containing raw materials invariably pose questions regarding the composition and properties of complex calcium aluminates, the practical significance of which not only remains within the existing technological processes for producing binding compositions, but also develops inconnection with the complex processing of aluminosilicate raw materials and the potential for their individual synthesis for obtaining new types of by-products. In this connection the task of the performed research was to determine the composition and properties of calcium hydrocarboaluminate (CHCA) during its obtaining using alumina production solutions, depending on the nature of the alkali metal cation in the Na2O(K2O) – CaO – Al2O3 – CO2 – H2O system. The performed works included the laboratory synthesis of calcium hydrocarboaluminates, in relation to the conditions of aluminosilicate raw materials processing by sintering. The obtained samples were subjected to a range of analytical methods, including differential thermal analysis, X-ray phase and X-ray fluorescence analysis, laser microanalysis and electron microscopy. Noticeable differences in the laboratory synthesis of CHCA based on sodium and potassium aluminate solutions in terms of the degree of conversion of calcium oxide into CHCA and its yield, the content of CHCA in the precipitate and its stoichiometry with CO2 saturation from 0.79 to 0.62 mol, respectively, and for the industrial sample 0.45 mol, as a result of changes in the physicochemical and technological conditions of synthesis, have been established. The efficacy of utilising a complex physicochemical analysis of calcium aluminates, predicated on the determination and consideration of the phase composition of the precipitate and the characteristic chemical alterations of the system during the interaction of the lime component with the aluminate solution, is demonstrated. This approach, based on the findings of chemical, X-ray phase and combined thermal analysis, facilitates the determination of the material composition of multicomponent precipitates and the stoichiometry of CHCA. The present work was carried out with the support of the International Competence Centre for Mining Engineering Education under the auspices of UNESCO under the project “Science”, St. Petersburg, Russia.
- 6 December 2024
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 2,p. 14-23
Carbon-based composite electrodes C – TiC/TiB2. Part 1. Synthesis and oxidizability of composites
The main results of a lab-scale technological development of a composite material “Carbon – Titanium Carbide/Titanium Diboride” (C – TiC/TiB2) carbothermal synthesis are presented in the work. Initial components – petroleum coke of various fractional compositions, titanium and boron compounds together with the binder – were mixed and calcinated at 1050 °С in air under the layer of preliminarily calcinated coke. Composite material С – TiC/TiB2 synthesized this way demonstrated a rather high resistivity to oxidation in air. In our mind the result was reached due to the formation of a Ti – C – B – О bonding medium on the surface and between the grains of a carbon material. It was found that resistivity to oxidation and degradation under various temperatures can be controlled with glass boron oxide fine condition, its distribution over the surface and with the rate of its evaporation from the electrode surface. An overall mechanism of the composite electrode oxidation process was proposed and the corresponding kinetic parameters of weight loss rate as a function of temperature were found. The proposed technological procedure of composite electrodes formation may be applied for a wide range of С – МеС/МеВ2 based materials, including electrodes for arc steel-smelting and ore-thermal furnaces, magnesium and aluminium cells.
- 6 December 2024
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 2,p. 14-23
Carbon-based composite electrodes C – TiC/TiB2. Part 1. Synthesis and oxidizability of composites
The main results of a lab-scale technological development of a composite material “Carbon – Titanium Carbide/Titanium Diboride” (C – TiC/TiB2) carbothermal synthesis are presented in the work. Initial components – petroleum coke of various fractional compositions, titanium and boron compounds together with the binder – were mixed and calcinated at 1050 °С in air under the layer of preliminarily calcinated coke. Composite material С – TiC/TiB2 synthesized this way demonstrated a rather high resistivity to oxidation in air. In our mind the result was reached due to the formation of a Ti – C – B – О bonding medium on the surface and between the grains of a carbon material. It was found that resistivity to oxidation and degradation under various temperatures can be controlled with glass boron oxide fine condition, its distribution over the surface and with the rate of its evaporation from the electrode surface. An overall mechanism of the composite electrode oxidation process was proposed and the corresponding kinetic parameters of weight loss rate as a function of temperature were found. The proposed technological procedure of composite electrodes formation may be applied for a wide range of С – МеС/МеВ2 based materials, including electrodes for arc steel-smelting and ore-thermal furnaces, magnesium and aluminium cells.
- 31 May 2023
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- No. 5,p. 37-44
Phase composition of aluminium hydroxides and its calculation based on thermal analysis data
This paper describes the results of thermal analysis of aluminium hydroxides that are most commonly used in the production of alumina and catalyst supports. The aluminium hydroxides contained an amorphous phase, boehmite, bayerite, pseudoboehmite, and gibbsite. Analysis of the temperature ranges of phase transformations was based on thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The proposed optimized graphical method for thermogram processing expands the range of parameters determined in aluminum hydroxide samples. The results of the conducted analytical study provide a more accurate ground for analyzing not only the crystalline phases but also the amorphous phase in the studied samples, as well as the excess structural water, ammonium nitrate and humidity. Thermal decomposition of aluminum hydroxide powder into oxides followed by reconstruction of the latter in an aqueous solution of (NH4)2CO3 leads to their selective reaction with the amorphous phase Al2O3 and the formation of NH4Al(OH)2CO3. Such sample preparation technique led to better accuracy when determining the amorphous phase in the samples by means of thermal analysis. Calibration thermograms were obtained by introducing known amounts of ammonium nitrate into the concentrated phase of microcrystalline boehmite through wet impregnation. Having processed them, the authors were able to propose a method for calculating the concentration of burning impurities in aluminium hydroxides. This research was carried out in the laboratory facilities provided by SPS Eurochim Ltd. from Saint Petersburg, Russia. The authors would like to thank professor Arkady Dykman, CEO of SPS Eurochim Ltd., Saint Petersburg, Russia, for providing laboratory equipment and materials for sample preparation.
- 31 May 2023
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- No. 5,p. 37-44
Phase composition of aluminium hydroxides and its calculation based on thermal analysis data
This paper describes the results of thermal analysis of aluminium hydroxides that are most commonly used in the production of alumina and catalyst supports. The aluminium hydroxides contained an amorphous phase, boehmite, bayerite, pseudoboehmite, and gibbsite. Analysis of the temperature ranges of phase transformations was based on thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The proposed optimized graphical method for thermogram processing expands the range of parameters determined in aluminum hydroxide samples. The results of the conducted analytical study provide a more accurate ground for analyzing not only the crystalline phases but also the amorphous phase in the studied samples, as well as the excess structural water, ammonium nitrate and humidity. Thermal decomposition of aluminum hydroxide powder into oxides followed by reconstruction of the latter in an aqueous solution of (NH4)2CO3 leads to their selective reaction with the amorphous phase Al2O3 and the formation of NH4Al(OH)2CO3. Such sample preparation technique led to better accuracy when determining the amorphous phase in the samples by means of thermal analysis. Calibration thermograms were obtained by introducing known amounts of ammonium nitrate into the concentrated phase of microcrystalline boehmite through wet impregnation. Having processed them, the authors were able to propose a method for calculating the concentration of burning impurities in aluminium hydroxides. This research was carried out in the laboratory facilities provided by SPS Eurochim Ltd. from Saint Petersburg, Russia. The authors would like to thank professor Arkady Dykman, CEO of SPS Eurochim Ltd., Saint Petersburg, Russia, for providing laboratory equipment and materials for sample preparation.
- 30 October 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 27-34
Raw material composition at Rusal Achinsk and its impact on the production indicators
It is well known that an unstable composition of ore and auxiliary materials creates the need to manage material flows and their composition in order to ensure the required productivity and achieve the desired qualitative and quantitative characteristics of the final products. The above problem was decided to find a solution for through analysis and mathematical processing of the RUSAL Achinsk database containing data on the incoming nepheline ore and limestone. Thus, one could analyze variations in the ore composition and carry out a statistical analysis by calculating the root-mean-square (standard) deviation and the variation coefficient. A digital model of the alumina and soda product production process employed by RUSAL Achinsk was used as the main tool for calculating production indicators as a function of the raw material composition. The model was built by RUSAL ETC on the basis of lumped parameters modelling. It is shown that the chemical composition of the raw materials supplied to RUSAL Achinsk and their variability in the current operating conditions of the Kiya-Shaltyr nepheline mine and Mazoul limestone mine have a significant impact on the alumina and by-product production process and some adjustment of the process flows is required. It was estimated how the output and the consumption of soda-sulfate mixture and potash are likely to change depending on the concentration of Al2O3, K2O, Na2O and SO3 in the feed material. Based on the obtained results, one can identify the most innovative process solutions that would enable to raise the output of by-products while maintaining the output of alumina due to the introduction of appropriate corrective ingredients. In this case, the output of potassium sulfate is expected to rise from 1.22 to 5.78%, and that of soda ash — from 1.27 to 6.5%, which determines a significant increase in profit for these two products. This research study was funded by the Russian Science Foundation under the Grant Agreement No. 18-19-00577 dated 26th April 2018 on fundamental scien tific research and exploratory scientific research.
- 30 October 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 27-34
Raw material composition at Rusal Achinsk and its impact on the production indicators
It is well known that an unstable composition of ore and auxiliary materials creates the need to manage material flows and their composition in order to ensure the required productivity and achieve the desired qualitative and quantitative characteristics of the final products. The above problem was decided to find a solution for through analysis and mathematical processing of the RUSAL Achinsk database containing data on the incoming nepheline ore and limestone. Thus, one could analyze variations in the ore composition and carry out a statistical analysis by calculating the root-mean-square (standard) deviation and the variation coefficient. A digital model of the alumina and soda product production process employed by RUSAL Achinsk was used as the main tool for calculating production indicators as a function of the raw material composition. The model was built by RUSAL ETC on the basis of lumped parameters modelling. It is shown that the chemical composition of the raw materials supplied to RUSAL Achinsk and their variability in the current operating conditions of the Kiya-Shaltyr nepheline mine and Mazoul limestone mine have a significant impact on the alumina and by-product production process and some adjustment of the process flows is required. It was estimated how the output and the consumption of soda-sulfate mixture and potash are likely to change depending on the concentration of Al2O3, K2O, Na2O and SO3 in the feed material. Based on the obtained results, one can identify the most innovative process solutions that would enable to raise the output of by-products while maintaining the output of alumina due to the introduction of appropriate corrective ingredients. In this case, the output of potassium sulfate is expected to rise from 1.22 to 5.78%, and that of soda ash — from 1.27 to 6.5%, which determines a significant increase in profit for these two products. This research study was funded by the Russian Science Foundation under the Grant Agreement No. 18-19-00577 dated 26th April 2018 on fundamental scien tific research and exploratory scientific research.
- Open Access
- 25 June 2019
- Published by Saint-Petersburg Mining University in Journal of Mining Institute
- Vol. 237 (3) , 298-306
Modern Physicochemical Equilibrium Description in Na2O–Al2O3–H2O System and Its Analogues
Современное физико-химическое описание равновесий в системе Na2O–Al2O3–H2O и ее аналогах
- 25 June 2019
- Published by Saint-Petersburg Mining University in Journal of Mining Institute
- Vol. 237 (3) , 298-306
Open AccessModern Physicochemical Equilibrium Description in Na2O–Al2O3–H2O System and Its Analogues
Современное физико-химическое описание равновесий в системе Na2O–Al2O3–H2O и ее аналогах