VBVyacheslav Nikolayevich Brichkin

Vyacheslav Nikolayevich Brichkin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Vyacheslav Nikolayevich Brichkin has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synthesis, properties and applications of complex calcium aluminates and hydroaluminates

    by V. M. Sizyakov, V. N. Brichkin, R. V. Kurtenkov, R. I. Maksimova

    Modern technologies for the processing of aluminium-containing raw materials invariably pose questions regarding the composition and properties of complex calcium aluminates, the practical significance of which not only remains within the existing technological processes for producing binding compositions, but also develops inconnection with the complex processing of aluminosilicate raw materials and the potential for their individual synthesis for obtaining new types of by-products. In this connection the task of the performed research was to determine the composition and properties of calcium hydrocarboaluminate (CHCA) during its obtaining using alumina production solutions, depending on the nature of the alkali metal cation in the Na2O(K2O) – CaO – Al2O3 – CO2 – H2O system. The performed works included the laboratory synthesis of calcium hydrocarboaluminates, in relation to the conditions of aluminosilicate raw materials processing by sintering. The obtained samples were subjected to a range of analytical methods, including differential thermal analysis, X-ray phase and X-ray fluorescence analysis, laser microanalysis and electron microscopy. Noticeable differences in the laboratory synthesis of CHCA based on sodium and potassium aluminate solutions in terms of the degree of conversion of calcium oxide into CHCA and its yield, the content of CHCA in the precipitate and its stoichiometry with CO2 saturation from 0.79 to 0.62 mol, respectively, and for the industrial sample 0.45 mol, as a result of changes in the physicochemical and technological conditions of synthesis, have been established. The efficacy of utilising a complex physicochemical analysis of calcium aluminates, predicated on the determination and consideration of the phase composition of the precipitate and the characteristic chemical alterations of the system during the interaction of the lime component with the aluminate solution, is demonstrated. This approach, based on the findings of chemical, X-ray phase and combined thermal analysis, facilitates the determination of the material composition of multicomponent precipitates and the stoichiometry of CHCA. The present work was carried out with the support of the International Competence Centre for Mining Engineering Education under the auspices of UNESCO under the project “Science”, St. Petersburg, Russia.


  • Regeneration and recycling of lime component in complex processing of kaolin raw materials

    by V. N. Brichkin, R. V. Kurtenkov, R. I. Maksimova, I. S. Bormotov

    Technological independence of the Russian aluminum industry has historically been constrained by compromises related to the domestic raw material base, which suffers from a shortage of high-quality bauxite and a reliance on low-quality aluminum raw materials. Several key issues remain to this day. One major ongoing challenge is improving the utilization efficiency of waste sludge, a by-product of alumina production generated during the processing of both traditional and low-quality aluminum raw materials. An advanced strategy for the utilization of silicate-calcium sludge from alumina production has been developed and implemented. This strategy specifically applies to processing nepheline-based raw materials and enables the production of a variety of by-products. There are, however, certain economic limitations that impact the production and market demand for these by-products. These financial constraints necessitate the development and optimization of technologies that can effectively regenerate and recycle the lime component present in the silicatecalcium sludge with the goal to facilitate the processing of different types of aluminosilicate raw materials. Relevant thermodynamic calculations indicate that carbon dioxide conversion of calcium orthosilicate is possible under atmospheric conditions, resulting in the release of lime and silicate components, regardless of the specific polymorphic modifications of orthosilicate and calcium carbonate involved. It has been established that calcium orthosilicate tends to become passivated by the products of chemical interactions. However, conditions for the conversion of γ-2CaO·SiO2, leading to the formation of aragonite and observed during the processing of kaolinite raw materials, have been shown to be more favorable. The study theoretically substantiates and experimentally confirms the influence of the degree of carbon dioxide conversion of calcium orthosilicate on the formulation of a two-component raw Portland cement mixture. It also demonstrates the potential for a significant reduction (up to 6.6 %) in the proportion of the sludge flow required to regenerate the lime component.


  • Open Access

    Alumina production: Historical development, issues, and solutions. Part 1

    by V. N. Brichkin, V. V. Vasiliev, R. I. Maksimova

    This study focuses on documenting the historical stages of aluminium and alumina production prior to the transition to a modern industry structure, involving the Hall-Héroult electrometallurgical process, and their technical significance for the contemporary metallurgical complex. It highlights the significance of these stages in the development of scientific knowledge related to alumina, aluminium, and their production technology when using chemical methods for obtaining metallic aluminium. The analysis includes aspects, such as classification, technical evaluation of the processes, and the raw material base. It is shown that the formation of scientific knowledge regarding alumina and aluminium is mainly associated with the practical need for using alum and, to some extent, clay minerals. Since the commencement of deliberate research into methods for aluminium production in its elemental state and virtually until the 1890s, aluminium was primarily produced using the metallothermal methods pioneered by Henri St. Clair Deville and his colleagues due to the high thermodynamic stability of aluminium compounds and the absence of affordable energy sources. It was found that from 1854 to 1890, the production of aluminium by chemical method was associated with the use of sodium aluminium chloride (NaCl·AlCl3), natural cryolite, or synthesised fluoride salts. Available technical reagents (aluminium sulphate, ammonia alum, and aluminium hydroxide), along with natural raw materials (cryolite, bauxite, and clay), were used as source materials in this period. The extraction and processing of bauxite were primarily associated with the production of alum and aluminium sulphate consumed by light industry. Although the demand for pure aluminium oxide was limited during the metallothermic production of aluminium, the driving force behind the advancement of modern technologies for alumina production was the demand for chemical products. This demand led to the development of technology for processing bauxite, which forms the foundation of the metallurgical complex in aluminium production using the Hall-Héroult electrometallurgical method.


  • Enhanced alumina extraction from kaolin by thermochemical activation using charcoal

    by Amr B. ElDeeb, Vyacheslav N. Brichkin, Martin Bertau, Mahmoud E. Awad, Yulia A. Savinova

    The present work aims to increase the alumina percentage recovery (APR) extracted from kaolinviathe addition of 0.5–4.0 wt.% charcoal as a thermochemical fluxing agent in the lime-sintering process at 1260–1360°C. The transformation, microstructural and microtextural changes and self-disintegration performance were characterized using thermogravimetric analysis and differential scanning calorimetry, X-ray diffraction/X-ray fluorescence, scanning electron microscopy coupled with energy-dispersive spectroscopy and laser diffraction particle-size distribution analysis. The optimum enhancement of APR, from 77.7% to 87.40%, was obtained by sintering at 1360°C with the addition of 1.5% charcoal. With further increase of the charcoal content to 4%, the APR reduced to 75.6%. Combustion of ≤1.5% charcoal provided additional heat that amorphized the crystalline calcium aluminate into highly leachable amorphous phases with improved self-disintegration efficiency. Sintering at temperatures of >1360°C or with charcoal contents >4% led to mullite crystallization and decreased alumina leachability, thereby reducing the APR. Charcoal is a cost-effective and energy-efficient activator to increase the APR extracted from kaolin.


  • Open Access

    Oxidation of Sulphur Dioxide using Micro‐ and Nanoparticles of various Iron Oxides

    by Lydia Reichelt, Sebastian Hippmann, Vyacheslav Nikolayevich Brichkin, Martin Bertau

    Sulphuric acid is the chemical with highest production rates in the world. At present, it is mainly synthesized using vanadium pentoxide as catalyst, which determines the applied production process particularly in terms of gas pre‐treatment and heat management. For processes, which cannot be run with vanadium pentoxide, alternative catalysts are required to make different SO2 qualities accessible to sulphuric acid production. Ferric oxides are a very promising alternative, since they combine higher thermal with improved chemical stability. Within this study, various ferric oxides were examined with regard to conversion rates and structural changes during application. Effects of crystal structure, particle size as well as thermal treatment and the influence of precipitation conditions were studied. Although conversion rates are very promising, it has become apparent, though, that these materials cannot compete with vanadium pentoxide in terms of conversion rate as well as long‐time stability, yet. Nevertheless, from the results of this study, it is clear that high potential lies in focused catalyst optimisation.


  • Study of the peculiarities of the leaching process for self-crumbling limestone-kaolin cakes

    by A. B. Eldeeb, V. N. Brichkin, R. V. Kurtenkov, I. S. Bormotov

    The article presents the results of an experimental study to establish the leaching indicators for limestone-kaolin cakes conducted using soda solutions with various process parameters. The experiments use the mathematical planning method that allows assessing the significance of various cake leaching parameters with the minimum number of experiments. It is shown that the temperature and concentration of the soda solution have a significant effect on the aluminum oxide recovery, with the highest recovery of 79.5 % within the selected factor variation intervals achieved at the process temperature of 50 °C, the soda solution concentration of 100 g/l, the liquid/solid ratio in the slurry of 7, and the leaching time of 25 minutes. Further studies using the coordinate-wise optimization method allowed establishing the leaching process parameters that ensure the aluminum oxide recovery of up to 85.2 %. At the same time, the paper shows a significant effect of the process temperature and time on the depth of secondary interactions leading to the deposition of aluminum oxide and requiring additional systemic studies. The established chemical and material composition of the sludge suggests that it may be effectively used as a component in raw Portland cement mixes, as well as a raw material for the regeneration and recycling of the lime component, which would reduce the consumption of natural carbonate raw materials and cut the emissions of greenhouse gases into the atmosphere. The research was carried out with the use of the laboratory equipment of the Scientific and Educational Center for Shared Use of the St. Petersburg Mining University. The work was carried out with the financial support of the Russian Science Foundation under the Agreement No. 18-19-00577 of April 26 2018 of grant for fundamental scientific research and exploratory scientific research.


  • Kurnakov as the founder of physico-chemical analysis – the scientific base for the development of new metal alloys and materials

    by A. G. Syrkov, V. N. Brichkin, N. R. Prokopchuk, A. G. Vorobiev, Moscow “Ore And Metals” Publishing House

    In the year of the 160th birth anniversary of Academician N. S. Kurnakov (1860–1941), outstanding graduate of the St. Petersburg Mining Institute (now University), it becomes clear that the issues concerning his activities as a metallurgist, materials scientist and researcher which opened the road through his students (P. P. Weimarn and others) to new technologies, including nanotechnology, are not studied enough. We do not know much about the Kurnakov–Schroeder–Weimarn relations and about their scientific communications with other physicochemists and metallurgists, who later became leaders of scientific schools and successors of the traditions of Kurnakov’s scientific school in the field of physical and chemical analysis. The purpose of this article is to analyze specific examples of the application of physicochemical analysis for development of metal alloys and materials, as well as to clarify the historical gaps in understanding the scientific relation of N. S. Kurnakov, I. F. Schroeder, P. P. Weimarn and other researchers who have made a significant contribution to the deve lopment of modern materials science and metallurgy. It is shown that P. P. Weimarn, being a student of Kurnakov and Schroeder, developed their scientific directions. However, he was not only a supporter, but also a critic of Kurnakov’s ideas, while becoming the founder of the science of nanotechnology. The results of the research summarize facts, including previously unknown ones, which demonstrate the outstanding role of N. S. Kurnakov and his achievements not only as a physicochemist, but also as a metallurgist-preceptor, one of the founders of Russian school of metallurgists and materials scientists, including the school of metallurgists of the Mining Institute, which gave momentum to number of breakthrough technologies of the 21st century.


  • Indicators and regularities of hydrolytic decomposition of metastable aluminate solutions in the Na2O-K2O-Al2O3-H2O system

    by V. N. Brichkin, A. T. Fedorov

    Target processing of aluminum ores with increased potassium content is well known in the world practice and at different stages of development of alumina production technology was associated with the use of the most avail-able and preferable raw materials, including leucites, alunites, nepheline syenites and close to them urtite miner-als. Currently, we can talk about a renaissance of interest in potassium-containing raw materials due to the gradual depletion of reserves and the impoverishment of traditional aluminum-containing raw materials against the high demand for and cost of the soda-potash products, potassium fertilizers, aluminum hydroxide, alumina, and materials based on them. This study used theoretical and experimental methods of research, including cal-culations of the equilibrium composition of aluminate solutions in the Na2O - K2O - Al2O3 - H2O system based on the additivity principle and experimental study of indicators and regularities of hydrolysis of aluminate solutions on aluminum hydroxide seed (decomposition), depending on the mole fraction of K2O in alkaline aluminate solu-tion. It was found that the degree of decomposition of aluminate solutions in the Na2O - K2O - Al2O3 - H2O system has a violation in the monotonicity of its change with the appearance of a special point at the mole fraction of K2O equal to 0.33, the presence of which can be explained by a change in the process mechanism due to a change in the ionic composition of the aluminate solution. The correlation between the degree of decomposition of aluminate solutions and the value of the average median particle diameter of the resulting aluminum hydroxide precipitate was shown, indicating a close relationship between the growth processes of crystallization and the hydrolytic decomposition mechanism in general, as well as their dependence on the ionic composition of alumi-nate solutions. The effect of transition of supersaturated (metastable) aluminate solutions into the area of unsaturated compositions has been established, which is of theoretical significance for understanding the mechanism of decomposition of potassium-bearing aluminate solutions and of practical importance for creating an effective technological cycle for the processing of aluminum-bearing raw materials based on the Na2O - K2O - Al2O3 - H2O system.


  • Mining Institute’s metallurgists: a tradition serving the Country, science and production industry

    by V. N. Brichkin, V. Yu. Bazhin, A. G. Vorobiev, Moscow “Ore And Metals” Publishing House

    Being the climax of the mining science, metallurgy has always played an important role at the Saint Petersburg Mining University, where a community emerged over the past years comprised of graduates and staff who chose metallurgy as the area of their professional interest and application. The history of the community is yet to be studied in all details. As for the professional activity of the former students of metallurgy and their contribution to the common cause of this discipline, this also needs to be thoroughly analyzed. The purpose of this essay is to partially close and highlight the current historic gaps with the hope to see further research in the area. We shall also try and answer the following question: How adequate is the metallurgist community of the Mining Institute to the current concept of the science school in Russia. Many years ago, the Mining Institute saw the rise of a community of metallurgists with different specializations, which still exists and is active today. The members of the community are capable of solving complex problems, generating breakthrough ideas and develop leadership skills. Getting support from their centuries-long heritage and their genuine interest in the subject, the community ensures its continuity and resists external change. The contemporary philosophy of science highlights the phenomenon of Russian science schools and their role for science and society while pointing out important features and characteristics. The most precise and concise definition of science schools was given by A. S. Levin, who oversees support of leading science schools and grants of the President of the Russian Federation. His definition is quite comprehensive: “A science school is a Russian historic form of joint research work carried out by a team of researchers of different ages and qualifications led by a recognized leader towards a common goal and ensuring an efficient research work and upskilling”. It will be entirely fair to apply this definition to the Mining Institute’s metallurgist community comprised of creative individuals who cherish centuries-long traditions and who, without hesitation, continue to engage themselves in research, education and social activity in this 21st century.