AGAnirban Ghosh

Anirban Ghosh

*This is an algorithmically generated author record based on publicly available information.

Anirban Ghosh has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Paraxial spin-induced vortex generation in epsilon-near-zero materials

    by Aloke Jana, Anirban Ghosh, Shyamal Guchhait, Ravi K. Saripalli, N. Apurv Chaitanya, Nirmalya Ghosh, Subhasish Dutta Gupta, G. K. Samanta

    Spin–orbit interactions (SOI) of light have emerged as a prominent area of research in nanophotonics, whereas epsilon-near-zero (ENZ) materials are gaining attention for their ability to interact with electromagnetic fields peculiarly. Integrating these two, we show that homogeneous ENZ thin films enable efficient spin-to-vortex conversion even under paraxial illumination. Using a generalized angular-spectrum formalism and experimental verification, we demonstrate that circularly polarized light incident on an indium-tin-oxide slab generates a second-order vortex in the cross-circular channel. Moreover, for elliptically deformed Gaussian excitation, the spin-induced vortex undergoes astigmatic splitting into two generic vortices. In contrast, a Bessel–Gaussian annulus with phase asymmetry from a tilted axicon produces a similar vortex splitting accompanied by a spin-dependent rotation of the double-core vortex pattern. These findings, combined with the intrinsic nonlinearity of ENZ materials, highlight their potential as a versatile platform to explore SOI effects across linear and nonlinear regimes.

  • Non-interferometric measurement of geometric phase through stimulated second harmonic generation

    by Chahat Kaushik, Anirban Ghosh, S. Chaitanya Kumar, Kavita Devi, Ritwick Das, G. K. Samanta

    The geometric phase (GP), arising from the evolution of states like polarization on the Poincaré sphere, is conventionally measured using interferometry. However, the interferometric techniques often suffer from instability, causing GP to be masked by dynamic phase contributions. Here, we propose a non-interferometric approach based on stimulated second harmonic generation (S-SHG) for GP measurement. Using a continuous-wave pump and two-stage SHG, we achieved S-SHG in the second crystal using the seed SHG and undepleted pump of the first crystal. By exploiting the phase-sensitive nature of the S-SHG, we mapped the GP, arising from the rotation of the half-waveplate, placed between two suitably oriented quarter-waveplates, onto the S-SHG power to measure GP with a sensitivity better than 26 μW/mrad. The measured GP value agrees with Jones' calculus and interferometric measurement. Furthermore, we found that the sensitivity of GP measurement is high for phase-modulation to pump beam and a high S-SHG amplification at low seed power, establishing the suitability of the S-SHG scheme for imaging biological samples with low illumination, avoiding thermal damage. Such a generic scheme can be implemented using any nonlinear crystal and laser (cw to ultrafast), establishing its potential for various applications.


  • Open Access

    Dynamically tunable broadband output coupling of optical oscillators based on non-cyclic geometric phase mirror

    by Chahat Kaushik, A. Aadhi, Anirban Ghosh, R. P. Singh, S. Dutta Gupta, M. Ebrahim-Zadeh, G. K. Samanta

    We present a uniquely versatile and efficient mirror system capable of real-time fine-tuning in reflection and transmission properties across a broad wavelength range and at a high optical power. Leveraging the principles of the non-cyclic geometric phase (GP) acquired by the clockwise and counterclockwise beams of the Sagnac interferometer satisfying the anti-resonant condition on propagation through the quarter-wave plate, half-wave plate, and quarter-wave plate combination having fast axes oriented at 45° (fixed), θ (variable), and −45° (fixed) with respect to the vertical, respectively, our mirror system offers dynamic transmission control across 0–100% without the need for realignment. Notably, the GP-based mirror (GP-mirror) preserves the polarization state of the reflected beam, making it ideal for polarization-sensitive applications. The wavelength insensitivity of the GP enables seamless operation of the mirror across a wide wavelength range. As a proof-of-principle, we use the GP-mirror as the output coupler of a continuous-wave, green-pumped, doubly resonant optical parametric oscillator (DRO) based on a 30-mm-long MgO:sPPLT crystal and obtain stable operation at high powers over a wide wavelength tuning range. For a pump power of 5 W, the DRO provides an output power of 2.45 W at an extraction efficiency as high as 49% when operated at optimum output coupling. The DRO shows a maximum pump depletion of 89% and delivers an optimum output power across a tuning range ≥90 nm. The demonstrated concept offers a promising approach for advancing the capabilities and control of coherent optical sources tunable across different spectral regions and in all time scales from continuous-wave to ultrafast femtosecond domain.


  • Open Access

    Simple experimental realization of optical Hilbert Hotel using scalar and vector fractional vortex beams

    by Subith Kumar, Anirban Ghosh, Chahat Kaushik, Arash Shiri, Greg Gbur, Sudhir Sharma, G. K. Samanta

    Historically, infinity was long considered a vague concept—boundless, endless, larger than the largest—without any quantifiable mathematical foundation. This view changed in the 1800s through the pioneering work of Georg Cantor, who showed that infinite sets follow their own seemingly paradoxical mathematical rules. In 1924, David Hilbert highlighted the strangeness of infinity through a thought experiment now referred to as the Hilbert Hotel paradox, or simply Hilbert’s Hotel. The paradox describes a “fully” occupied imaginary hotel having an infinite number of single-occupancy rooms. The manager can always find a room for new guests by simply shifting current guests to the next highest room, leaving the first room vacant. The investigation of wavefield singularities has uncovered the existence of a direct optical analogy to Hilbert’s thought experiment. Since then, efforts have been made to investigate the properties of Hilbert’s Hotel by controlling the dynamics of phase singularities in “fractional” order optical vortex beams. Here, we have taken such proposals to the next level and experimentally demonstrated Hilbert’s Hotel using both phase and polarization singularities of optical fields. Using a multi-ramped spiral-phase-plate and a supercontinuum source, we generated and controlled fractional order vortex beams for the practical implementation of Hilbert’s Hotel in scalar and vector vortex beams. Using a multi-ramped spiral-phase-plate, we show the possibility for complicated transitions of the generalized Hilbert’s Hotel. The generic experimental scheme illustrates the usefulness of structured beams in visualizing unusual mathematical concepts and also for fractional vector beams driven by fundamental and applied research.


  • Controlling the Coverage of Full Poincaré Beams through Second-Harmonic Generation

    by Subith Kumar, Ravi K. Saripalli, Anirban Ghosh, Wagner T. Buono, Andrew Forbes, G.K. Samanta

    Ideal full Poincaré (FP) beams contain all possible polarization states on the surface of the Poincaré sphere and are readily created by linear optical techniques and, more recently, by nonlinear optical processes. An inherent limitation in the latter is the inability to achieve all polarization states, coined coverage, due to modal size, polarization, and modal weighting changes during the nonlinear conversion of the constituent modes. Here, we demonstrate a simple technique to control the coverage of FP beams, using second-harmonic generation as an example, from fully scalar (no coverage) to fully vectorial (full coverage). Our method for determining the coverage confirms the vectorial characteristics of the generated beams and reveals a balancing act between mode order, modal nonlinear efficiency, and initial relative modal weights, all in close agreement with that theoretically predicted. Our findings will hopefully be of value to the communities interested in nonlinear structured light, particularly for vectorial nonlinear modal creators and detectors and control of quantum hybrid entangled states.


  • A Tolerance‐Enhanced Spontaneous Parametric Downconversion Source of Bright Entangled Photons

    by Sandeep Singh, Vimlesh Kumar, Anirban Ghosh, Andrew Forbes, G. K. Samanta

    Spontaneous parametric down‐conversion (SPDC), a primary resource of photonic quantum entangled states, strongly depends on the intrinsic phase matching condition. This makes it susceptible to changes in factors such as the pump wavelength, crystal temperature, and crystal axes orientation. Such intolerance to changing environmental factors prohibits deployment of SPDC‐based sources in non‐ideal environments outside controlled laboratories. Here, a novel system architecture based on a hybrid linear and non‐linear solution that is shown to make the source tolerance‐enhanced without sacrificing brightness. This linear solution is a lens‐axicon pair, judiciously placed, which is tested together with two common non‐linear crystals, quasi‐phase‐matched periodically‐poled KTiOPO 4 , and birefringent‐phase‐matched BiB 3 O 6 . This approach has the benefit of simultaneous tolerance to the environment and high brightness, which is demonstrated by using the proposed architecture as a stable entangled photon source and a spectral brightness as high as 22.58 ± 0.15 kHz mW −1 with a state fidelity of 0.95 , yet requiring a crystal temperature stability of only ±0.8 °C, a 5 × enhanced tolerance as compared to the conventional high brightness SPDC configurations is reported. This solution offers a new approach to deployable high‐brightness quantum sources that are robust to their environment, for instance, in satellite‐based quantum applications.


  • Watt-level, ultrafast, tunable yellow source based on single-pass, fourth-harmonic generation of Cr2+:ZnS laser at 2360 nm

    by Deepika Yadav, Anirban Ghosh, Ravi K. Saripalli, Goutam K. Samanta

    We report a compact source of high power, tunable, ultrafast yellow radiation using fourth-harmonic generation of a mid-IR laser in two-stage frequency-doubling processes. Using C r 2 + : Z n S laser at 2360 nm frequency-doubled in a multi-grating MgO:PPLN crystal, we have generated near-IR radiation tunable across 1137–1200 nm with average output power as high as 2.4 W and pulse width of ∼ 60 f s . Subsequently, the near-IR radiation is frequency-doubled using a bismuth triborate (BIBO) crystal to produce coherent yellow radiation tunable across 570–596 nm with a maximum average power of ∼ 1 W . The source has a maximum mid-IR to yellow (near-IR to yellow) single-pass conversion efficiency as high as ∼ 29.4 % ( ∼ 47 % ). Without any pulse compression, the yellow source has output pulses at a repetition rate of 80 MHz with a pulse width of ∼ 130 f s in Gaussian-shaped and a spectral width of ∼ 4 n m corresponding to a time-bandwidth product of 0.45. The generated output beam has a Gaussian transverse beam profile with measured M 2 values of M x 2 ∼ 1.07 and M y 2 ∼ 1.01 .


  • Frequency-conversion of vector vortex beams with space-variant polarization in single-pass geometry

    by Ravi K. Saripalli, Anirban Ghosh, N. Apurv Chaitanya, G. K. Samanta

    Nonlinear frequency conversion processes depend on the polarization state of the interacting beams. On the other hand, vector vortex beams have space-variant polarization in the transverse beam plane. In light of these two points, is it possible to do nonlinear frequency conversion of the vector vortex beam in single-pass geometry and retain the characteristics of the beam? To address this question, here, we report an experimental scheme for single-pass second harmonic generation (SHG) of vector vortex beams. Using an ultrafast Ti:Sapphire laser of pulse width ∼17 fs and a set of spiral phase plates in a polarization based Mach–Zehnder interferometer (MZI), we have generated vector vortex beams of order as high as lp = 12 at an average power of 860 mW. Using two contiguous bismuth borate crystals with the optic axis orthogonal to each other, we have frequency-doubled the near-IR vector vortex beam into visible vector vortex beam with order as high as lsh = 24. The maximum output power of the vector vortex beam of order, lsh = 2, is measured be as high as 20.5 mW at a single-pass SHG efficiency of 2.4%. Controlling the delay in MZI, we have preserved the vector vortex nature of both the pump and frequency-doubled beams. Measurement on the mode purity confirms the generation of high quality vector vortex beams at pump and SHG wavelengths. This generic scheme can be used to generate vector vortex beams across the electromagnetic spectrum in all time scales, continuous-wave to ultrafast.


  • Single-pass, second-harmonic generation of high-power, ultrafast mid-IR Cr2+:ZnS laser at 2360 nm

    by Anirban Ghosh, Deepika Yadav, G. K. Samanta

    We report on a compact and simple ultrafast source producing tunable radiation in the near-IR wavelength range. Based on single-pass frequency doubling of an ultrafast Cr2+:ZnS laser at 2360 nm with pulse width of 43 fs at a repetition rate of 80 MHz in MgO:PPLN crystal, the source produces maximum average output power of ∼2.43  W tunable across 1137–1200 nm with a maximum single-pass conversion efficiency as high as 65%. Without use of any pulse compression technique, the source produces output pulses in Gaussian shape with measured pulse width of ∼60  fs and spectral width of 39 nm centered at 1180 nm corresponding to a time-bandwidth product of 0.5. The output beam has a Gaussian spatial profile with measured M2<1.32 and a peak-to-peak power fluctuation of 3% over 2 h. Using MgO:PPLN crystal of two different lengths, 1 mm and 2 mm, we have observed that the optimum second-harmonic generation efficiency of an ultrafast pulse laser, even in the presence of temporal walk-off, appears in the low pump focusing condition.


  • Simultaneous generation of high-power, ultrafast 1D and 2D Airy beams and their frequency-doubling characteristics

    by Raghwinder S. Grewal, Anirban Ghosh, G. K. Samanta

    We report on a simple experimental scheme based on a pair of cylindrical lenses (convex and concave) of the same focal length and common optical elements, producing high power optical beams in 1D and/or 2D Airy intensity profiles with laser polarization as the control parameter. Using an ultrafast Yb-fiber laser at 1064 nm of average power of 5 W in a Gaussian spatial profile and pulse width of ∼180  fs, we have generated 1D and 2D Airy beams at an efficiency of 80% and 70%, respectively, and a pulse width of ∼188 and ∼190  fs, respectively. We have measured the transverse deflection rate of 1D and 2D beams to be ∼5.0×10−5 1/mm and ∼2.0×10−5 1/mm, respectively. Simply rotating the polarization state of the 1D cubic phase modulated beam in the experiment, we can produce 1D and 2D Airy beams on demand. Using a 5 mm long bismuth borate (BiB3O6), we have also studied frequency-doubling characteristics of both 1D and 2D Airy beams. Like the 2D Airy beam, the 1D Airy beam also produces a frequency-doubled 1D Airy and an additional 1D spatial cubic structure. Like the Gaussian beams, we have observed the focusing dependence of conversion efficiency for both 1D and 2D Airy beams, producing green 1D and 2D Airy beams of output powers in excess of 110 and 150 mW for 3.4 and 2.8 W of fundamental power, respectively.