Xiaoling Cui
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoling Cui has a total of 145 co-authors. Here are the top co-authors by number of shared publications:
- Shiyou Li
School of Petrochemical Technology, Lanzhou University of Technology, Lanzhou 730050, PR China
22 shared publications Shiyou Li
School of Petrochemical Technology, Lanzhou University of Technology, Lanzhou 730050, PR China
21 shared publicationsPeng Wang
16 shared publicationsDongni Zhao
12 shared publications- Dongni Zhao
School of Petrochemical Technology, Lanzhou University of Technology, Lanzhou 730050, PR China
12 shared publications Ningshuang Zhang
School of Petrochemical Technology, Lanzhou University of Technology, Lanzhou 730050, PR China
11 shared publications
Latest Publications
- 9 November 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (43) , 17034-17046
Breaking the self-limiting decomposition kinetics of FEC electrolytes via synchronized ultrasound for stable lithium-ion batteries
FEC reduction-synchronized ultrasound breaks the self-limiting kinetic bottleneck, restores interfacial mass transport, and enables the formation of a robust LiF-rich hybrid SEI, boosting Li battery cycling and high-temperature performance.
- 9 November 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (43) , 17034-17046
Breaking the self-limiting decomposition kinetics of FEC electrolytes via synchronized ultrasound for stable lithium-ion batteries
FEC reduction-synchronized ultrasound breaks the self-limiting kinetic bottleneck, restores interfacial mass transport, and enables the formation of a robust LiF-rich hybrid SEI, boosting Li battery cycling and high-temperature performance.
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (62) , 43086-43095
Achieving high rate capacity and cyclability of LiMn 0.6 Fe 0.4 PO 4 cathode through crystal-facet modulation and Mg-doping engineering
Herein, a synergistic strategy of crystal-facet modulation and Mg doping engineering is proposed to achieve high capacity, superior rate capability, and long cycle stability in LMFP.
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (62) , 43086-43095
Achieving high rate capacity and cyclability of LiMn 0.6 Fe 0.4 PO 4 cathode through crystal-facet modulation and Mg-doping engineering
Herein, a synergistic strategy of crystal-facet modulation and Mg doping engineering is proposed to achieve high capacity, superior rate capability, and long cycle stability in LMFP.
- 7 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (59) , 41067-41079
Tailoring dominant {001} crystal facets of single-crystal P2-type Na 0.67 Ni 0.15 Fe 0.2 Mn 0.65 O 2 via molten-salt flux engineering toward high-voltage stable sodium-ion battery cathodes
Using Ce(NO 3 ) 4 flux, we synthesize P2-type single-crystal layered oxides with {001} orientation. This structure suppresses cracking and phase transitions, optimizing Na + transport for high-capacity, stable sodium-ion battery cathodes.
- 7 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (59) , 41067-41079
Tailoring dominant {001} crystal facets of single-crystal P2-type Na 0.67 Ni 0.15 Fe 0.2 Mn 0.65 O 2 via molten-salt flux engineering toward high-voltage stable sodium-ion battery cathodes
Using Ce(NO 3 ) 4 flux, we synthesize P2-type single-crystal layered oxides with {001} orientation. This structure suppresses cracking and phase transitions, optimizing Na + transport for high-capacity, stable sodium-ion battery cathodes.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 35754-35765
Enhanced high-voltage stability of vanadium redox flow batteries via intermittent electric-field relaxation charging
An intermittent electric field relaxation strategy effectively mitigates high-voltage side reactions, enabling stable long-term cycling with high capacity within 0.8–2.2 V.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 35754-35765
Enhanced high-voltage stability of vanadium redox flow batteries via intermittent electric-field relaxation charging
An intermittent electric field relaxation strategy effectively mitigates high-voltage side reactions, enabling stable long-term cycling with high capacity within 0.8–2.2 V.
- 28 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (35) , 48135-48146
Oxygen Vacancy Engineering and Pre-accommodated Distortion Stabilization Enabling Superior Rate and Cycling Performance in P2-Type Mn-Rich Cathodes
P2-type layered oxides have been considered as an ideal cathode material for sodium-ion batteries (SIBs) due to their high capacity and facile synthesis, yet their practical application is severely hampered by Jahn–Teller distortion, manganese dissolution, and poor intrinsic ionic conductivity. While conventional cation doping strategies can partially mitigate these issues, the complex mechanisms and multi-component interactions pose challenges for rational material design. Here, we propose an oxygen vacancy engineering strategy, introducing controllable oxygen vacancies into Na0.67Ni0.15Fe0.2Mn0.65O2 (NFM) by regulating the calcination atmosphere. The introduced oxygen vacancies effectively modulate the local electronic structure of manganese, lower its average valence state, and induce the formation of an orthorhombic P'2 phase. Attributed to the pre-accommodating lattice distortion of the P'2 phase, the structural stability and reversibility of NFM are significantly enhanced. Concurrently, the increased cationic disorder improves both electronic and ionic conductivity. Benefiting from these synergistic effects, the modified NFM cathode delivers outstanding rate and cyclability performance, maintaining a considerable capacity of 127.3 mAh g–1 at 5 C and a high capacity retention of 90.8% even after 500 cycles. This work not only creates an effective vacancy engineering approach to simultaneously enhance the rate capability and cycling stability of Mn-rich cathodes but also provides guidance for designing high-performance electrode materials for SIBs via anion framework regulation.
- 28 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (35) , 48135-48146
Oxygen Vacancy Engineering and Pre-accommodated Distortion Stabilization Enabling Superior Rate and Cycling Performance in P2-Type Mn-Rich Cathodes
P2-type layered oxides have been considered as an ideal cathode material for sodium-ion batteries (SIBs) due to their high capacity and facile synthesis, yet their practical application is severely hampered by Jahn–Teller distortion, manganese dissolution, and poor intrinsic ionic conductivity. While conventional cation doping strategies can partially mitigate these issues, the complex mechanisms and multi-component interactions pose challenges for rational material design. Here, we propose an oxygen vacancy engineering strategy, introducing controllable oxygen vacancies into Na0.67Ni0.15Fe0.2Mn0.65O2 (NFM) by regulating the calcination atmosphere. The introduced oxygen vacancies effectively modulate the local electronic structure of manganese, lower its average valence state, and induce the formation of an orthorhombic P'2 phase. Attributed to the pre-accommodating lattice distortion of the P'2 phase, the structural stability and reversibility of NFM are significantly enhanced. Concurrently, the increased cationic disorder improves both electronic and ionic conductivity. Benefiting from these synergistic effects, the modified NFM cathode delivers outstanding rate and cyclability performance, maintaining a considerable capacity of 127.3 mAh g–1 at 5 C and a high capacity retention of 90.8% even after 500 cycles. This work not only creates an effective vacancy engineering approach to simultaneously enhance the rate capability and cycling stability of Mn-rich cathodes but also provides guidance for designing high-performance electrode materials for SIBs via anion framework regulation.
- Open Access
- 1 May 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (11)
Li 2 CO 3 -rich interphase construction via alternating pulse current-driven CO 2 reduction for high performance LiFePO 4 /graphite full-cell
Featuring of low Li+ diffusion barrier and high Li+ conductivity, a Li2CO3-rich solid electrolyte interphase (SEI) is critical for improving the energy density and cycle life of lithium-ion batteries. As a gaseous additive, CO2 can be added into the electrolyte to in situ generating Li2CO3-contained SEI. However, CO2-derived SEI formation is kinetics limitation. Here, we identify the adsorption of CO intermediate products impeding the full conversion of CO2, and furtherly apply an alternating pulse current (APC) discharge to desorb CO and promote the CO2 decomposition, ultimately in-situ forming a uniform, smooth, and Li2CO3-rich SEI in the first cycle. Owing to the excellent Li+ transport capability and structural stability, this APC-formed SEI enables lithium/graphite (Li/Gr) half-cells achieving a high rate performance (5 C, 180 mAh g-1, and 80.1% after 170 cycles), exceeding currently advanced cells with Li2CO3-contained SEI. Furthermore, we directly employ the Gr anode with the APC pre‑formed Li2CO3-rich SEI to assemble LiFePO4 (LFP)/Gr full-cell. Advantaged by the high Li+ diffusivity and stability, this pre‑formed SEI not only compensates for the active lithium loss, dramatically enhancing the initial coulombic efficiency from 69.2% to 91.7%, but also substantially increases the discharge capacity and long‑term cycling stability (131.8 mAh g-1 after 100 cycles at 0.5 C). This straightforward strategy simultaneously enhances gas additive utilization efficiency and constructs a robust electrolyte/electrode interphase, demonstrating a dual-optimization approach through electrolyte design and interface engineering for high-performance batteries.
- 1 May 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (11)
Open AccessLi 2 CO 3 -rich interphase construction via alternating pulse current-driven CO 2 reduction for high performance LiFePO 4 /graphite full-cell
Featuring of low Li+ diffusion barrier and high Li+ conductivity, a Li2CO3-rich solid electrolyte interphase (SEI) is critical for improving the energy density and cycle life of lithium-ion batteries. As a gaseous additive, CO2 can be added into the electrolyte to in situ generating Li2CO3-contained SEI. However, CO2-derived SEI formation is kinetics limitation. Here, we identify the adsorption of CO intermediate products impeding the full conversion of CO2, and furtherly apply an alternating pulse current (APC) discharge to desorb CO and promote the CO2 decomposition, ultimately in-situ forming a uniform, smooth, and Li2CO3-rich SEI in the first cycle. Owing to the excellent Li+ transport capability and structural stability, this APC-formed SEI enables lithium/graphite (Li/Gr) half-cells achieving a high rate performance (5 C, 180 mAh g-1, and 80.1% after 170 cycles), exceeding currently advanced cells with Li2CO3-contained SEI. Furthermore, we directly employ the Gr anode with the APC pre‑formed Li2CO3-rich SEI to assemble LiFePO4 (LFP)/Gr full-cell. Advantaged by the high Li+ diffusivity and stability, this pre‑formed SEI not only compensates for the active lithium loss, dramatically enhancing the initial coulombic efficiency from 69.2% to 91.7%, but also substantially increases the discharge capacity and long‑term cycling stability (131.8 mAh g-1 after 100 cycles at 0.5 C). This straightforward strategy simultaneously enhances gas additive utilization efficiency and constructs a robust electrolyte/electrode interphase, demonstrating a dual-optimization approach through electrolyte design and interface engineering for high-performance batteries.