DZDongni Zhao

Dongni Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dongni Zhao has a total of 120 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Breaking the self-limiting decomposition kinetics of FEC electrolytes via synchronized ultrasound for stable lithium-ion batteries

    by Xinyi Hu, Xiaoling Cui, Miaomiao Lv, Shiyou Li, Yulong Zhang, Hongcheng Liang, Zhengli Hua, Hui Wang, Dongni Zhao, Xiaoming Xie, et al.

    FEC reduction-synchronized ultrasound breaks the self-limiting kinetic bottleneck, restores interfacial mass transport, and enables the formation of a robust LiF-rich hybrid SEI, boosting Li battery cycling and high-temperature performance.

  • Synergistic solvent-anion competitive coordination chemistry for low-temperature sodium metal batteries

    by Yijie Yao, Yong Pang, Junwei Zhang, Yanjun Zhao, Yinong Wang, Mengya Wang, Junfei Zhou, Shiyou Li, Degao Qiao, Teng Zhang, et al.

  • Tailoring dominant {001} crystal facets of single-crystal P2-type Na 0.67 Ni 0.15 Fe 0.2 Mn 0.65 O 2 via molten-salt flux engineering toward high-voltage stable sodium-ion battery cathodes

    by Lei Niu, Juan Bai, Jiawen Zhang, Xingpeng Cai, Yueqin Kong, Lijuan Wang, Tiaotiao Lu, Shiyou Li, Xiaoling Cui, Dongni Zhao, et al.

    Using Ce(NO 3 ) 4 flux, we synthesize P2-type single-crystal layered oxides with {001} orientation. This structure suppresses cracking and phase transitions, optimizing Na + transport for high-capacity, stable sodium-ion battery cathodes.

  • Open Access

    Enabling Low‐Temperature Fast‐Charging Anode‐Free Sodium Metal Batteries: A Synergistic Design of Electrolyte Solvation and Current Collector Interface

    by Dongni Zhao, Yong Pang, Xiaoling Cui, Li Wang, Shiyou Li, Xiangming He

    Anode‐free sodium metal batteries (AFSMBs) promise ultrahigh energy density (>350 Wh kg −1 ) and low cost, yet their operation under low‐temperature and fast‐charging conditions is critically hindered by limited sodium inventory and sluggish interfacial kinetics. This conflict creates a “stability paradox”: the pursuit of high energy density amplifies interfacial instability, leading to inhomogeneous sodium deposition and rapid capacity decay. This review systematically analyzes AFSMB failure mechanisms under extreme conditions and demonstrates that overcoming these bottlenecks requires integrated co‐design across four synergistic domains: (1) engineering electrolyte solvation structures (weakly solvating, high‐concentration, and high‐entropy designs) to lower the desolvation barrier and stabilize the solid–electrolyte interphase; (2) tailoring current collector interfaces with sodiophilic coatings or three‐dimensional architectures to guide uniform sodium deposition; (3) incorporating rational pre‐sodiation strategies to compensate irreversible sodium loss; and (4) leveraging artificial intelligence and molecular simulations for data‐driven electrolyte screening. We critically assess the trade‐offs of each strategy and provide a forward‐looking perspective on reversible sodium compensation, multi‐scale AI platforms, and full‐cell integration. This review offers a roadmap for developing practical, wide‐temperature‐range, high‐energy‐density AFSMBs, with recent pouch cells already demonstrating >200 Wh kg −1 and stable cycling from −40°C to 60°C.

  • Enhanced high-voltage stability of vanadium redox flow batteries via intermittent electric-field relaxation charging

    by Shihui Wang, Biao Zhao, Xiaoling Cui, Xinfang Xu, Ningshuang Zhang, Dongni Zhao, Shiyou Li

    An intermittent electric field relaxation strategy effectively mitigates high-voltage side reactions, enabling stable long-term cycling with high capacity within 0.8–2.2 V.

  • Oxygen Vacancy Engineering and Pre-accommodated Distortion Stabilization Enabling Superior Rate and Cycling Performance in P2-Type Mn-Rich Cathodes

    by Juan Bai, Lei Niu, Xingpeng Cai, Zhipeng Wang, Yueqin Kong, Lijuan Wang, Tiaotiao Lu, Shiyou Li, Xiaoling Cui, Dongni Zhao, et al.

    P2-type layered oxides have been considered as an ideal cathode material for sodium-ion batteries (SIBs) due to their high capacity and facile synthesis, yet their practical application is severely hampered by Jahn–Teller distortion, manganese dissolution, and poor intrinsic ionic conductivity. While conventional cation doping strategies can partially mitigate these issues, the complex mechanisms and multi-component interactions pose challenges for rational material design. Here, we propose an oxygen vacancy engineering strategy, introducing controllable oxygen vacancies into Na0.67Ni0.15Fe0.2Mn0.65O2 (NFM) by regulating the calcination atmosphere. The introduced oxygen vacancies effectively modulate the local electronic structure of manganese, lower its average valence state, and induce the formation of an orthorhombic P'2 phase. Attributed to the pre-accommodating lattice distortion of the P'2 phase, the structural stability and reversibility of NFM are significantly enhanced. Concurrently, the increased cationic disorder improves both electronic and ionic conductivity. Benefiting from these synergistic effects, the modified NFM cathode delivers outstanding rate and cyclability performance, maintaining a considerable capacity of 127.3 mAh g–1 at 5 C and a high capacity retention of 90.8% even after 500 cycles. This work not only creates an effective vacancy engineering approach to simultaneously enhance the rate capability and cycling stability of Mn-rich cathodes but also provides guidance for designing high-performance electrode materials for SIBs via anion framework regulation.

  • Open Access

    Engineering bilayer SEI via ultrasonic fields for long-life lithium batteries

    by Yu Liu, Hongcheng Liang, Peng Wang, Jingni Li, Xinyi Hu, Huanhuan Yang, Chunlei Li, Shiyou Li, Dongni Zhao


  • Constructing a multi-dimensional hierarchical structure to improve the cycling stability of silicon nanowires

    by Feilong Zhang, Tiaotiao Lu, Yu Zhu, Xingpeng Cai, Dingdong Hao, Feifei Zong, Juan Bai, Lijuan Wang, Yueqin Kong, Ningshuang Zhang, et al.

    Despite its exceptionally high theoretical capacity, silicon faces significant challenges as an anode material for lithium-ion batteries (LIBs) due to its intrinsically low electrical conductivity and substantial volume variation (∼300%) during repeated (de)lithiation processes. To address these issues, silicon nanowires (SiNWs) featuring a 0D–1D–3D hierarchical structure are constructed by employing carbon nanotubes (CNTs) as structural templates, via a sol–gel process followed by magnesiothermic reduction. The nanowire morphology effectively shortens the Li+ diffusion distance and enhances Li+ transport kinetics. Besides, the internal voids between nanoparticles accommodate the large volume expansion of silicon, effectively mitigating mechanical strain and reducing electrode pulverization. Consequently, the electrode exhibits a remarkably low volume expansion of only 73.7% after 200 cycles. Furthermore, the interconnected 3D network established by the nanowires provides continuous pathways for both electron transport and ion diffusion, which reduces interparticle contact resistance. This architecture results in a 44.5% enhancement in the lithium-ion diffusion coefficient compared to conventional silicon nanoparticles. Additionally, the robust 3D framework effectively distributes localized stress, greatly improving cycling stability. As a result, the SiNW-based anode delivers a high specific capacity of 997.3 mA h g−1 after 200 cycles at 0.1C. This synthesis strategy, centered on stress-management engineering, demonstrates considerable potential for the practical application of Si-based anodes in high-energy-density LIBs.

  • Triple Ion–Dipole Regulated Solvation Enables Dendrite-Suppressing High-Temperature Stable Lithium-Ion Batteries

    by Hui Wang, Shiyou Li, Lijuan Wang, Xiaojuan Zhang, Miaomiao Lv, Kerong Yang, Ningshuang Zhang, Dongni Zhao

    Conventional lithium-ion batteries face a stability limitation above 45 °C due to electrolyte decomposition and irregularly growing lithium dendrites, necessitating advanced electrolytes with enhanced thermal safety and high-temperature performance. Herein, when lithium bis(fluorosulfonyl)imide (LiFSI) in glycerol triacetate (GTA) solvent containing three identical ester groups was combined with LiNO3 additive, a robust semi-enclosed Li+ solvation structure with triple ion-dipole interactions was constructed. Endowed with GTA's long-chain characteristics and ester oxygen atom's high polarity, the solvation structure exhibits superior thermal stability. Density functional theory (DFT) calculations confirm that the Li+-carbonyl interaction has a particularly high binding energy, strengthening Li+ solvation structure stability. This design homogenizes high-temperature lithium deposition to mitigate dendrite growth and inhibits electrolyte-electrode side reactions, significantly improving the thermal stability and safety of LiFePO4-based batteries. Specifically, LiFePO4/Li cells achieve stable operation over 100 cycles at 70 °C with 77.4% capacity retention. This work provides fundamental insights into solvation structure design via multi-ion-dipole interactions and offers a reliable strategy for developing safer, high-performance lithium-ion batteries adaptable to extreme thermal environments.


  • Cation-Acceptor DMI Boosts NaNO 3 Solubility via Solvation Regulation for High-Performance Nonaqueous Sodium Rechargeable Batteries

    by Ling Hu, Chunlei Li, Yin Quan, Haitao Shen, Shiyou Li, Dongni Zhao

    Sodium nitrate (NaNO3) serves as an effective film-forming additive, facilitating the formation of inorganic, nitride-rich solid electrolyte interphase (SEI) layers at the electrode interface. However, its limited solubility in conventional ether-based electrolytes constrains its practical application. To overcome this limitation, a high donor-number solvent, 1,3-dimethyl-2-imidazolidinone (DMI), was introduced to enhance the solubility of NaNO3 in hard carbon (HC)-based sodium-ion batteries. Due to its strong donor number (DN), DMI acts as a cation acceptor, which can disrupt the ion-pairing limitation by attracting Na+ ions and weakening the interaction between Na+ and NO3, thereby increases the solubility of NaNO3 in the ether-based electrolyte to 0.05 M. Meanwhile, in order to overcome the problem of thicker film formation caused by the introduction of DMI, it was preferred that the addition amount of DMI in the electrolyte be 10%. The optimized electrolyte system generates a nitrogen-rich SEI film. As a result, the HC||Na half-cell achieved a specific charge capacity of 300 mAh·g-1 at 0.5 C and a 91% capacity retention after 400 cycles. This work proposes a strategy to manipulate solvation structures by improving NaNO3 solubility via high donor-number solvents, offering a straightforward approach to designing advanced electrolytes for sodium-ion batteries.