Lesya Karpova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lesya Karpova has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Juliy Boiko
Khmelnytskyi National University, Khmelnytskyi, Ukraine
5 shared publications - Ilya Pyatin
Khmelnytskyi Polytechnic Professional College by Lviv Polytechnic National University, Khmelnytskyi, Ukraine
3 shared publications - Oleksander Eromenko
Хмельницький національний університет
3 shared publications - Viktor Mishan
Хмельницький національний університет
3 shared publications Юлій Бойко
3 shared publicationsKhmelnytskyi National University
2 shared publications
Latest Publications
- Open Access
- 29 January 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 361 (1) , 184-188
ІНТЕЛЕКТУАЛЬНА БАГАТОРІВНЕВА СИСТЕМА ЗБОРУ ДЛЯ БЕЗДРОТОВОЇ ЕНЕРГІЇ
This paper presents a conceptual model of a large-scale wireless microwave energy harvester designed using an Intelligent Reconfigurable Collecting Surface architecture. The proposed concept contributes to the advancement of renewable and wireless energy technologies by introducing a novel hierarchical structure that enables efficient microwave energy capture and concentration over extended spatial regions. The system is composed of a large number of elementary harvesting units, each capable of receiving and partially processing the incident microwave energy. These units are organized into a two-level hierarchical configuration distributed across both horizontal and vertical planes to maximize the overall collection performance. In the horizontal plane, the receiving surface is implemented as an array of square radiating elements arranged into subarrays that provide wide angular coverage and adaptability to different directions of incoming waves. Each subarray operates cooperatively to ensure uniform energy reception even under varying incidence angles and environmental conditions. In the vertical plane, a hierarchical beamforming and combining network is employed to aggregate the received power based on the watershed principle, where a single receiving port collects energy from its assigned and neighboring elements, similar to how a catchment basin gathers water from its tributaries. This configuration enhances the effective aperture and ensures constructive energy combining with minimal phase losses. The integrated multi-level structure leads to improved antenna gain, higher power collection density, and better overall system efficiency compared with conventional planar harvesting designs. The simulation and preliminary experimental results demonstrate the feasibility, scalability, and superior energy conversion capability of the proposed architecture. These findings indicate that the IRCS-based approach is a promising platform for next-generation wireless power transfer systems, energy-autonomous networks, and large-area renewable energy harvesting infrastructures.
- 29 January 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 361 (1) , 184-188
Open AccessІНТЕЛЕКТУАЛЬНА БАГАТОРІВНЕВА СИСТЕМА ЗБОРУ ДЛЯ БЕЗДРОТОВОЇ ЕНЕРГІЇ
This paper presents a conceptual model of a large-scale wireless microwave energy harvester designed using an Intelligent Reconfigurable Collecting Surface architecture. The proposed concept contributes to the advancement of renewable and wireless energy technologies by introducing a novel hierarchical structure that enables efficient microwave energy capture and concentration over extended spatial regions. The system is composed of a large number of elementary harvesting units, each capable of receiving and partially processing the incident microwave energy. These units are organized into a two-level hierarchical configuration distributed across both horizontal and vertical planes to maximize the overall collection performance. In the horizontal plane, the receiving surface is implemented as an array of square radiating elements arranged into subarrays that provide wide angular coverage and adaptability to different directions of incoming waves. Each subarray operates cooperatively to ensure uniform energy reception even under varying incidence angles and environmental conditions. In the vertical plane, a hierarchical beamforming and combining network is employed to aggregate the received power based on the watershed principle, where a single receiving port collects energy from its assigned and neighboring elements, similar to how a catchment basin gathers water from its tributaries. This configuration enhances the effective aperture and ensures constructive energy combining with minimal phase losses. The integrated multi-level structure leads to improved antenna gain, higher power collection density, and better overall system efficiency compared with conventional planar harvesting designs. The simulation and preliminary experimental results demonstrate the feasibility, scalability, and superior energy conversion capability of the proposed architecture. These findings indicate that the IRCS-based approach is a promising platform for next-generation wireless power transfer systems, energy-autonomous networks, and large-area renewable energy harvesting infrastructures.
- Open Access
- 30 June 2025
- Published by Sikorsky Academic Press in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 100,p. 27-42
Optimization of Cartesian Feedback Loops for Wideband SDR Transmitters in 5G Mobile Networks
The article investigates the application of the Cartesian Feedback (CF) loop for distortion compensation in wideband Software-defined radio (SDR) systems, specifically in the context of 5G mobile networks, which incorporate technologies such as Orthogonal Frequency-Division Multiplexing (OFDM) and support applications like the Internet of Things (IoT). The purpose of the research is to minimize nonlinear distortions, such as I/Q-imbalance and phase noise, through a combined analog-digital compensation approach that includes Digital Predistortion (DPD) and the use of a CF loop. In addition, the research aims to investigate how these distortions affect the error resilience of 5G systems, particularly in terms of Error Vector Magnitude (EVM) instability, using Signal-Code Constructions (SCC) based on Quasi-Cyclic Low-Density Parity-Check Code (QC-LDPC) and Polar Codes (P-C) with 256-Quadrature Amplitude Modulation (256-QAM). This dual focus enables a comprehensive analysis of both signal correction mechanisms and their impact on communication reliability. This allows for a significant reduction in computational costs and delays, which is crucial for practical applications in 5G and IoT systems. The object of the study is the effectiveness of the CF loop combined with DPD, analyzed through Simulink Matlab, with an evaluation of its impact on the EVM, Modulation Error Ratio (MER), and Bit Error Ratio (BER). As a result of the research, it is shown that the CF loop enhanced with DPD significantly improves signal quality by reducing EVM and enhancing spectral purity compared to traditional compensation methods such as digital equalization and predistortion.The subject of the research is the optimization of the CF loop for wideband SDR transmitters in 5G mobile networks, aiming to enhance efficiency, reduce latency, and ensure high-quality signal transmission in systems that employ technologies such as OFDM and support IoT applications. The proposed approach enhances the reliability and stability of data transmission in modern wireless networks, which is particularly relevant given the increasing demands for speed and quality of service. The results of this study may be beneficial for telecommunications equipment developers and engineers involved in implementing advanced technologies in the field of wireless communication.
- 30 June 2025
- Published by Sikorsky Academic Press in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 100,p. 27-42
Open AccessOptimization of Cartesian Feedback Loops for Wideband SDR Transmitters in 5G Mobile Networks
The article investigates the application of the Cartesian Feedback (CF) loop for distortion compensation in wideband Software-defined radio (SDR) systems, specifically in the context of 5G mobile networks, which incorporate technologies such as Orthogonal Frequency-Division Multiplexing (OFDM) and support applications like the Internet of Things (IoT). The purpose of the research is to minimize nonlinear distortions, such as I/Q-imbalance and phase noise, through a combined analog-digital compensation approach that includes Digital Predistortion (DPD) and the use of a CF loop. In addition, the research aims to investigate how these distortions affect the error resilience of 5G systems, particularly in terms of Error Vector Magnitude (EVM) instability, using Signal-Code Constructions (SCC) based on Quasi-Cyclic Low-Density Parity-Check Code (QC-LDPC) and Polar Codes (P-C) with 256-Quadrature Amplitude Modulation (256-QAM). This dual focus enables a comprehensive analysis of both signal correction mechanisms and their impact on communication reliability. This allows for a significant reduction in computational costs and delays, which is crucial for practical applications in 5G and IoT systems. The object of the study is the effectiveness of the CF loop combined with DPD, analyzed through Simulink Matlab, with an evaluation of its impact on the EVM, Modulation Error Ratio (MER), and Bit Error Ratio (BER). As a result of the research, it is shown that the CF loop enhanced with DPD significantly improves signal quality by reducing EVM and enhancing spectral purity compared to traditional compensation methods such as digital equalization and predistortion.The subject of the research is the optimization of the CF loop for wideband SDR transmitters in 5G mobile networks, aiming to enhance efficiency, reduce latency, and ensure high-quality signal transmission in systems that employ technologies such as OFDM and support IoT applications. The proposed approach enhances the reliability and stability of data transmission in modern wireless networks, which is particularly relevant given the increasing demands for speed and quality of service. The results of this study may be beneficial for telecommunications equipment developers and engineers involved in implementing advanced technologies in the field of wireless communication.
- Open Access
- 15 May 2025
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 2,p. 204-212
ВИСОКОЕФЕКТИВНІ MIMO-РІШЕННЯ ДЛЯ БЕЗДРОТОВИХ МЕРЕЖ WIMAX І 5G
У сучасних бездротових системах зв’язку, таких як WiMAX та 5G, технологія MIMO відіграє ключову роль у підвищенні пропускної здатності, спектральної ефективності та загальної якості зв’язку. У цій роботі аналізуються передові підходи до проєктування та оптимізації MIMO-систем, зокрема використання спеціалізованих антенних елементів для покращення ізоляції каналів та зниження взаємних завад. Запропоновані конструктивні рішення дозволяють досягти високої ефективності випромінювання в широкому діапазоні частот. Представлені результати моделювання підтверджують зростання загальної продуктивності системи в порівнянні з традиційними реалізаціями.
- 15 May 2025
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 2,p. 204-212
Open AccessВИСОКОЕФЕКТИВНІ MIMO-РІШЕННЯ ДЛЯ БЕЗДРОТОВИХ МЕРЕЖ WIMAX І 5G
У сучасних бездротових системах зв’язку, таких як WiMAX та 5G, технологія MIMO відіграє ключову роль у підвищенні пропускної здатності, спектральної ефективності та загальної якості зв’язку. У цій роботі аналізуються передові підходи до проєктування та оптимізації MIMO-систем, зокрема використання спеціалізованих антенних елементів для покращення ізоляції каналів та зниження взаємних завад. Запропоновані конструктивні рішення дозволяють досягти високої ефективності випромінювання в широкому діапазоні частот. Представлені результати моделювання підтверджують зростання загальної продуктивності системи в порівнянні з традиційними реалізаціями.
- Open Access
- 28 November 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 343 (6(1)) , 173-178
ОПТИМІЗАЦІЯ ЕФЕКТИВНОСТІ БЕЗДРОТОВОЇ ПЕРЕДАЧІ ЕНЕРГІЇ ЧЕРЕЗ ТРИФАЗНУ МАГНІТНО-РЕЗОНАНСНУ СИСТЕМУ
В даній роботі запропоновано трифазну бездротову систему передачі енергії, що враховує проблеми низької потужності та ефективності в однофазних системах. Створена багатофізична модель, що детально аналізує топологію трифазної резонансної компенсаційної мережі та оптимізацію конструкції котушки зв’язку. Результати моделювання показують, що запропонована система зменшує втрати магнітного потоку і напругу в контурі, значно підвищуючи ефективність передачі енергії.
- 28 November 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 343 (6(1)) , 173-178
Open AccessОПТИМІЗАЦІЯ ЕФЕКТИВНОСТІ БЕЗДРОТОВОЇ ПЕРЕДАЧІ ЕНЕРГІЇ ЧЕРЕЗ ТРИФАЗНУ МАГНІТНО-РЕЗОНАНСНУ СИСТЕМУ
В даній роботі запропоновано трифазну бездротову систему передачі енергії, що враховує проблеми низької потужності та ефективності в однофазних системах. Створена багатофізична модель, що детально аналізує топологію трифазної резонансної компенсаційної мережі та оптимізацію конструкції котушки зв’язку. Результати моделювання показують, що запропонована система зменшує втрати магнітного потоку і напругу в контурі, значно підвищуючи ефективність передачі енергії.
- Open Access
- 30 May 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 335 (3(1)) , 297-306
THE PROBLEM OF OPTIMAL DISCRETIZATION OF LOW-FREQUENCY AND BAND SIGNALS IN CYBERPHYSICAL SYSTEMS WITH ANALOG INTERFACES
В статті розглядається проблема вибору оптимальної частоти дискретизації в задачах цифрової обробки сигналів з обмеженою смугою частот. Досліджено і систематизовано різні підходи особливо в частині дискретизації смугових сигналів, сформовано практичні рекомендації для вирішення даної проблеми враховуючи такі фактори, як надмірність вибірки, співвідношення сигнал/шум, стабільність вузлів дискретизатора тощо. Запропоновано різні підходи та критерії оптимальності процесу дискретизації, що забезпечують компактне та точне представлення сигналу.
- 30 May 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 335 (3(1)) , 297-306
Open AccessTHE PROBLEM OF OPTIMAL DISCRETIZATION OF LOW-FREQUENCY AND BAND SIGNALS IN CYBERPHYSICAL SYSTEMS WITH ANALOG INTERFACES
В статті розглядається проблема вибору оптимальної частоти дискретизації в задачах цифрової обробки сигналів з обмеженою смугою частот. Досліджено і систематизовано різні підходи особливо в частині дискретизації смугових сигналів, сформовано практичні рекомендації для вирішення даної проблеми враховуючи такі фактори, як надмірність вибірки, співвідношення сигнал/шум, стабільність вузлів дискретизатора тощо. Запропоновано різні підходи та критерії оптимальності процесу дискретизації, що забезпечують компактне та точне представлення сигналу.
- 28 November 2023
- Published by Springer Nature
- p. 369-383
Evaluation of the Capabilities of LDPC Codes for Network Applications in the 802.11ax Standard
- 28 November 2023
- Published by Springer Nature
- p. 369-383
Evaluation of the Capabilities of LDPC Codes for Network Applications in the 802.11ax Standard
- Open Access
- 30 October 2023
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 325 (5(1)) , 40-46
ВИСОКОРІВНЕВА ОДНОПЛОЩИННА АНТЕНА MIMO ДЛЯ ДЕВАЙСІВ 5G
This work presents the design of a single-plane multiple-input/multiple-output MIMO antenna system for smartphones with 5G support at a frequency below 6 GHz. The developed MIMO antenna consists of four loop-shaped emitters located at each corner of the mobile phone board, which conforms to the principle of pattern diversity. The single-antenna element resonates at 3.5 GHz, has an impedance bandwidth of 1.28 GHz (3-4.28 GHz) for S11 ≤ –6 dB, and is 720 MHz (3.18-3.9 GHz) for S11 ≤ –10dB. For a single-antenna element, a peak gain of 3.64 dBi is observed with an antenna efficiency of >90%. For the MIMO antenna configuration, isolation >10 dB is achieved between its elements. In addition, the designed MIMO antenna provides sufficient radiation coverage to support different sides of the mobile phone board, which is an important feature for all 5G-enabled phones. A planar multiple-input/multiple-output MIMO antenna design is presented for sub-6 GHz 5G-enabled mobile phone applications. Four loop-shaped radiators are designed at each corner of a smartphone board, and they all follow the design configuration of pattern diversity. Several MIMO antenna features are evaluated, such as S-parameters, gain patterns, radiation and total efficiency, envelope correlation coefficient, total active reflection coefficient, and diversity gain. From the reported results, it may be concluded that the presented MIMO antenna system successfully meets the criteria of 5G-enabled mobile phones. In addition, the impacts of human hands and heads on MIMO antenna performance are investigated, and acceptable performance in the data and conversation modes is observed.
- 30 October 2023
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 325 (5(1)) , 40-46
Open AccessВИСОКОРІВНЕВА ОДНОПЛОЩИННА АНТЕНА MIMO ДЛЯ ДЕВАЙСІВ 5G
This work presents the design of a single-plane multiple-input/multiple-output MIMO antenna system for smartphones with 5G support at a frequency below 6 GHz. The developed MIMO antenna consists of four loop-shaped emitters located at each corner of the mobile phone board, which conforms to the principle of pattern diversity. The single-antenna element resonates at 3.5 GHz, has an impedance bandwidth of 1.28 GHz (3-4.28 GHz) for S11 ≤ –6 dB, and is 720 MHz (3.18-3.9 GHz) for S11 ≤ –10dB. For a single-antenna element, a peak gain of 3.64 dBi is observed with an antenna efficiency of >90%. For the MIMO antenna configuration, isolation >10 dB is achieved between its elements. In addition, the designed MIMO antenna provides sufficient radiation coverage to support different sides of the mobile phone board, which is an important feature for all 5G-enabled phones. A planar multiple-input/multiple-output MIMO antenna design is presented for sub-6 GHz 5G-enabled mobile phone applications. Four loop-shaped radiators are designed at each corner of a smartphone board, and they all follow the design configuration of pattern diversity. Several MIMO antenna features are evaluated, such as S-parameters, gain patterns, radiation and total efficiency, envelope correlation coefficient, total active reflection coefficient, and diversity gain. From the reported results, it may be concluded that the presented MIMO antenna system successfully meets the criteria of 5G-enabled mobile phones. In addition, the impacts of human hands and heads on MIMO antenna performance are investigated, and acceptable performance in the data and conversation modes is observed.
- 27 May 2023
- Published by Springer Nature
- p. 89-107
Design Concepts for Mobile Computing Direction Finding Systems
- 27 May 2023
- Published by Springer Nature
- p. 89-107
Design Concepts for Mobile Computing Direction Finding Systems
- 15 March 2023
- Published by Springer Nature
- p. 549-569
Increasing Efficiency in the Correlation Processing of Information Signals for Radar
- 15 March 2023
- Published by Springer Nature
- p. 549-569
Increasing Efficiency in the Correlation Processing of Information Signals for Radar
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
MIMO ANTENNA ARRAY WITH DIRECTIONAL DIAGRAM SPREAD FOR 5G SMARTPHONES
Multiple-input/multiple-output technology can exponentially increase the data transfer rate and spectrum efficiency without any need of increasing the transmission power and bandwidth. It is the most promising technology to be used in the upcoming 5G communications. To be more accurate, the fourth generation smartphones are set to use the long-term evolution MIMO technology and operate in multi-bands. Therefore, MIMO antennas are to use in future portable devices such as mobile handsets and tablets. A new multiple-input/multiple-output (MIMO) antenna design is introduced for future smartphones. The proposed design contains four pairs of double-fed circular-ring resonators located at different edges of the smartphone printed circuit board (PCB) with an FR-4 substrate and a dimension of 75 × 150 mm2. The antenna elements are fed by 50-Ohm microstriplines and provide polarisation and radiation pattern diversity function due to the orthogonal placement of their feed lines. By inserting a rectangular slot under each microstrip feed-line, the mutual coupling characteristic of the antenna ports is reduced. A good frequency bandwidth (S11 ≤ − 10 dB) of 3.3–3.9 GHz has been obtained for the smartphone antenna array. Nevertheless, for S11 ≤ −6 dB, this value is 3.1–4.3 GHz. More than 3 dB realised gain and 80% total efficiency are achieved for the single element radiator. The design provides not only sufficient radiation coverage supporting different sides of the mainboard but also the polarisation diversity. In addition, sufficient properties are obtained in the vicinity of human-hand/human-head. The proposed MIMO antenna design is also capable to generate dual- or multi-band function. Moreover, a new and compact phased array millimeter-wave (mm-wave) antenna design with end-fire radiation beams is introduced which can be easily integrated into smartphones.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
MIMO ANTENNA ARRAY WITH DIRECTIONAL DIAGRAM SPREAD FOR 5G SMARTPHONES
Multiple-input/multiple-output technology can exponentially increase the data transfer rate and spectrum efficiency without any need of increasing the transmission power and bandwidth. It is the most promising technology to be used in the upcoming 5G communications. To be more accurate, the fourth generation smartphones are set to use the long-term evolution MIMO technology and operate in multi-bands. Therefore, MIMO antennas are to use in future portable devices such as mobile handsets and tablets. A new multiple-input/multiple-output (MIMO) antenna design is introduced for future smartphones. The proposed design contains four pairs of double-fed circular-ring resonators located at different edges of the smartphone printed circuit board (PCB) with an FR-4 substrate and a dimension of 75 × 150 mm2. The antenna elements are fed by 50-Ohm microstriplines and provide polarisation and radiation pattern diversity function due to the orthogonal placement of their feed lines. By inserting a rectangular slot under each microstrip feed-line, the mutual coupling characteristic of the antenna ports is reduced. A good frequency bandwidth (S11 ≤ − 10 dB) of 3.3–3.9 GHz has been obtained for the smartphone antenna array. Nevertheless, for S11 ≤ −6 dB, this value is 3.1–4.3 GHz. More than 3 dB realised gain and 80% total efficiency are achieved for the single element radiator. The design provides not only sufficient radiation coverage supporting different sides of the mainboard but also the polarisation diversity. In addition, sufficient properties are obtained in the vicinity of human-hand/human-head. The proposed MIMO antenna design is also capable to generate dual- or multi-band function. Moreover, a new and compact phased array millimeter-wave (mm-wave) antenna design with end-fire radiation beams is introduced which can be easily integrated into smartphones.