Viktor Mishan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Viktor Mishan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Khmelnytskyi National University
3 shared publications- Lesya Karpova
Khmelnytskyi National University, Khmelnytskyi, Ukraine
3 shared publications - Artem Akulynichev
Харківський національний університет радіоелектроніки
1 shared publication - Denys Makaryshkin1 shared publication
- Ilya Pyatin
Khmelnytskyi Polytechnic Professional College by Lviv Polytechnic National University, Khmelnytskyi, Ukraine
1 shared publication - Inna Lobachova1 shared publication
Latest Publications
- Open Access
- 28 August 2025
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 3,p. 265-275
ЛЕГКІ КРИПТОСИСТЕМИ В ТЕЛЕКОМУНІКАЦІЙНИХ СЕРЕДОВИЩАХ IOT І 5G: ВИКЛИКИ, АРХІТЕКТУРИ ТА КОМПРОМІСИ БЕЗПЕКИ
У статті проведено детальний аналіз архітектури безпеки мереж 5G з акцентом на багаторівневу модель захисту, що охоплює рівні NAS, AS і транспортної безпеки. Розглянуто основні криптографічні алгоритми (AES, ZUC, SNOW 3G), їх характеристики, сфери застосування та енергоефективність в умовах мобільного середовища. Описано ієрархію ключів, яка забезпечує надійність та локалізацію ризиків у разі компрометації. Представлено перспективи розвитку механізмів захисту з урахуванням зростаючих вимог до Інтернету речей (IoT), квантостійких технологій і віртуалізації мереж.
- 28 August 2025
- Published by Khmelnytskyi National University in Measuring and computing devices in technological processes
- No. 3,p. 265-275
Open AccessЛЕГКІ КРИПТОСИСТЕМИ В ТЕЛЕКОМУНІКАЦІЙНИХ СЕРЕДОВИЩАХ IOT І 5G: ВИКЛИКИ, АРХІТЕКТУРИ ТА КОМПРОМІСИ БЕЗПЕКИ
У статті проведено детальний аналіз архітектури безпеки мереж 5G з акцентом на багаторівневу модель захисту, що охоплює рівні NAS, AS і транспортної безпеки. Розглянуто основні криптографічні алгоритми (AES, ZUC, SNOW 3G), їх характеристики, сфери застосування та енергоефективність в умовах мобільного середовища. Описано ієрархію ключів, яка забезпечує надійність та локалізацію ризиків у разі компрометації. Представлено перспективи розвитку механізмів захисту з урахуванням зростаючих вимог до Інтернету речей (IoT), квантостійких технологій і віртуалізації мереж.
- Open Access
- 28 November 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 343 (6(1)) , 173-178
ОПТИМІЗАЦІЯ ЕФЕКТИВНОСТІ БЕЗДРОТОВОЇ ПЕРЕДАЧІ ЕНЕРГІЇ ЧЕРЕЗ ТРИФАЗНУ МАГНІТНО-РЕЗОНАНСНУ СИСТЕМУ
В даній роботі запропоновано трифазну бездротову систему передачі енергії, що враховує проблеми низької потужності та ефективності в однофазних системах. Створена багатофізична модель, що детально аналізує топологію трифазної резонансної компенсаційної мережі та оптимізацію конструкції котушки зв’язку. Результати моделювання показують, що запропонована система зменшує втрати магнітного потоку і напругу в контурі, значно підвищуючи ефективність передачі енергії.
- 28 November 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 343 (6(1)) , 173-178
Open AccessОПТИМІЗАЦІЯ ЕФЕКТИВНОСТІ БЕЗДРОТОВОЇ ПЕРЕДАЧІ ЕНЕРГІЇ ЧЕРЕЗ ТРИФАЗНУ МАГНІТНО-РЕЗОНАНСНУ СИСТЕМУ
В даній роботі запропоновано трифазну бездротову систему передачі енергії, що враховує проблеми низької потужності та ефективності в однофазних системах. Створена багатофізична модель, що детально аналізує топологію трифазної резонансної компенсаційної мережі та оптимізацію конструкції котушки зв’язку. Результати моделювання показують, що запропонована система зменшує втрати магнітного потоку і напругу в контурі, значно підвищуючи ефективність передачі енергії.
- Open Access
- 31 December 2023
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 329 (6) , 238-242
ОПТИМІЗАЦІЯ КОМПАКТНИХ ЛОГПЕРІОДИЧНИХ ДИПОЛЬНИХ АНТЕН ІЗ РОЗШИРЕНОЮ НИЗЬКОЧАСТОТНОЮ ХАРАКТЕРИСТИКОЮ
With the rapid technological advancements over the last decade, there is an increased demand for new generation wireless devices and communication systems. This work provides an overview of various methods of miniaturization of printed log-periodic dipole antennas in order to reduce their size. First, the work involves the design of a standard printed log-periodic dipole antenna that operates over a wide frequency range from 0.7 GHz to 8 GHz and has an acceptable gain over most of its bandwidth. This antenna serves as a baseline model for further research and optimization. Furthermore, this paper introduces a novel approach to extending the low-frequency response of these antennas. The approach entails replacing the longest direct dipole with a triangular dipole structure and optimizing the dimensions of the four longest dipoles. The outcome is an enhanced antenna capable of operating within the 0.4 GHz to 8 GHz range, albeit with a minor reduction in gain at lower frequencies. The research on extending the low-frequency response of printed log-periodic dipole antennas holds promise for enhancing antenna systems' performance across various applications, including wireless communications, radar, and satellite communications. The findings of this study can serve as a foundation for further innovations and developments in the field of antenna technology, making a significant contribution to the advancement of modern wireless technologies. This work is particularly valuable for engineers and scientists working in the realm of antenna technology and wireless communications. It introduces a fresh perspective on enhancing the low-frequency performance of printed log-periodic dipole antennas, which may find applications in diverse radio communication systems, thus addressing the growing demand for compact yet efficient antenna solutions in the ever-evolving world of wireless technology.
- 31 December 2023
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 329 (6) , 238-242
Open AccessОПТИМІЗАЦІЯ КОМПАКТНИХ ЛОГПЕРІОДИЧНИХ ДИПОЛЬНИХ АНТЕН ІЗ РОЗШИРЕНОЮ НИЗЬКОЧАСТОТНОЮ ХАРАКТЕРИСТИКОЮ
With the rapid technological advancements over the last decade, there is an increased demand for new generation wireless devices and communication systems. This work provides an overview of various methods of miniaturization of printed log-periodic dipole antennas in order to reduce their size. First, the work involves the design of a standard printed log-periodic dipole antenna that operates over a wide frequency range from 0.7 GHz to 8 GHz and has an acceptable gain over most of its bandwidth. This antenna serves as a baseline model for further research and optimization. Furthermore, this paper introduces a novel approach to extending the low-frequency response of these antennas. The approach entails replacing the longest direct dipole with a triangular dipole structure and optimizing the dimensions of the four longest dipoles. The outcome is an enhanced antenna capable of operating within the 0.4 GHz to 8 GHz range, albeit with a minor reduction in gain at lower frequencies. The research on extending the low-frequency response of printed log-periodic dipole antennas holds promise for enhancing antenna systems' performance across various applications, including wireless communications, radar, and satellite communications. The findings of this study can serve as a foundation for further innovations and developments in the field of antenna technology, making a significant contribution to the advancement of modern wireless technologies. This work is particularly valuable for engineers and scientists working in the realm of antenna technology and wireless communications. It introduces a fresh perspective on enhancing the low-frequency performance of printed log-periodic dipole antennas, which may find applications in diverse radio communication systems, thus addressing the growing demand for compact yet efficient antenna solutions in the ever-evolving world of wireless technology.
- Open Access
- 7 March 2023
- Published by National Aerospace University - Kharkiv Aviation Institute in RADIOELECTRONIC AND COMPUTER SYSTEMS
- No. 1,p. 155-165
A multi-criteria approach to decision-making in telecommunication network components selection
The problem of decision-making regarding the selection of the optimal composition of telecommunication network components is very urgent. The subject of the research in the article is a multi-criteria approach to the selection of telecommunication network components. This approach is related to the evaluation of possible options based on a set of indicators. The set of such indicators is determined by the specifics of a telecommunication network. One of the most dominant devices in telecommunication (mobile) systems is speech codecs. When choosing the appropriate codec configuration, there is a need to make a decision considering a set of contradicting criteria. The use of MCDM (Multiple Criteria Decision Making) methods when making decisions is a promising approach to solving such problems. The current article increases the efficiency of the multi-criteria approach to decision-making in the process of selecting telecommunication network components, in particular, a speech codec. The following methods were used: MARCOS (Measurement Alternatives and Ranking according to COmpromise Solution), entropy, CRITIC (Criteria Importance Through Inter-criteria Correlation) and BWM (Best–Worst method). The following results were obtained. Determining the weight of the criteria by which alternatives are evaluated is one of the key problems that arise when making multi-criteria decisions. Objective methods of entropy, CRITIC, and subjective BWM methods were used to find weighting factors of criteria. Different methods of determining the weights of the criteria give different values. The use of the combined BWM-CRITIC method is proposed, which balances the subjective opinions of experts and assessments made solely based on the decision matrix data. The values of the correlation coefficients showed a close relationship between the weights of the criteria determined by different methods. However, the strongest connection with other methods was shown by the combined BWM-CRITIC method. The MARCOS method was used to rank the alternatives and select the best alternative. A ranking of the set of speech codecs is obtained, which allows for determining the best alternative Conclusion. A comprehensive approach to the telecommunication network component selection is proposed, namely the multi-criteria BWM-CRITIC-MARCOS model, based on a combination of MCDM methods. The integration of methods into the proposed model provides a systematic approach to the assessment and selection of telecommunication network components.
- 7 March 2023
- Published by National Aerospace University - Kharkiv Aviation Institute in RADIOELECTRONIC AND COMPUTER SYSTEMS
- No. 1,p. 155-165
Open AccessA multi-criteria approach to decision-making in telecommunication network components selection
The problem of decision-making regarding the selection of the optimal composition of telecommunication network components is very urgent. The subject of the research in the article is a multi-criteria approach to the selection of telecommunication network components. This approach is related to the evaluation of possible options based on a set of indicators. The set of such indicators is determined by the specifics of a telecommunication network. One of the most dominant devices in telecommunication (mobile) systems is speech codecs. When choosing the appropriate codec configuration, there is a need to make a decision considering a set of contradicting criteria. The use of MCDM (Multiple Criteria Decision Making) methods when making decisions is a promising approach to solving such problems. The current article increases the efficiency of the multi-criteria approach to decision-making in the process of selecting telecommunication network components, in particular, a speech codec. The following methods were used: MARCOS (Measurement Alternatives and Ranking according to COmpromise Solution), entropy, CRITIC (Criteria Importance Through Inter-criteria Correlation) and BWM (Best–Worst method). The following results were obtained. Determining the weight of the criteria by which alternatives are evaluated is one of the key problems that arise when making multi-criteria decisions. Objective methods of entropy, CRITIC, and subjective BWM methods were used to find weighting factors of criteria. Different methods of determining the weights of the criteria give different values. The use of the combined BWM-CRITIC method is proposed, which balances the subjective opinions of experts and assessments made solely based on the decision matrix data. The values of the correlation coefficients showed a close relationship between the weights of the criteria determined by different methods. However, the strongest connection with other methods was shown by the combined BWM-CRITIC method. The MARCOS method was used to rank the alternatives and select the best alternative. A ranking of the set of speech codecs is obtained, which allows for determining the best alternative Conclusion. A comprehensive approach to the telecommunication network component selection is proposed, namely the multi-criteria BWM-CRITIC-MARCOS model, based on a combination of MCDM methods. The integration of methods into the proposed model provides a systematic approach to the assessment and selection of telecommunication network components.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
MIMO ANTENNA ARRAY WITH DIRECTIONAL DIAGRAM SPREAD FOR 5G SMARTPHONES
Multiple-input/multiple-output technology can exponentially increase the data transfer rate and spectrum efficiency without any need of increasing the transmission power and bandwidth. It is the most promising technology to be used in the upcoming 5G communications. To be more accurate, the fourth generation smartphones are set to use the long-term evolution MIMO technology and operate in multi-bands. Therefore, MIMO antennas are to use in future portable devices such as mobile handsets and tablets. A new multiple-input/multiple-output (MIMO) antenna design is introduced for future smartphones. The proposed design contains four pairs of double-fed circular-ring resonators located at different edges of the smartphone printed circuit board (PCB) with an FR-4 substrate and a dimension of 75 × 150 mm2. The antenna elements are fed by 50-Ohm microstriplines and provide polarisation and radiation pattern diversity function due to the orthogonal placement of their feed lines. By inserting a rectangular slot under each microstrip feed-line, the mutual coupling characteristic of the antenna ports is reduced. A good frequency bandwidth (S11 ≤ − 10 dB) of 3.3–3.9 GHz has been obtained for the smartphone antenna array. Nevertheless, for S11 ≤ −6 dB, this value is 3.1–4.3 GHz. More than 3 dB realised gain and 80% total efficiency are achieved for the single element radiator. The design provides not only sufficient radiation coverage supporting different sides of the mainboard but also the polarisation diversity. In addition, sufficient properties are obtained in the vicinity of human-hand/human-head. The proposed MIMO antenna design is also capable to generate dual- or multi-band function. Moreover, a new and compact phased array millimeter-wave (mm-wave) antenna design with end-fire radiation beams is introduced which can be easily integrated into smartphones.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
MIMO ANTENNA ARRAY WITH DIRECTIONAL DIAGRAM SPREAD FOR 5G SMARTPHONES
Multiple-input/multiple-output technology can exponentially increase the data transfer rate and spectrum efficiency without any need of increasing the transmission power and bandwidth. It is the most promising technology to be used in the upcoming 5G communications. To be more accurate, the fourth generation smartphones are set to use the long-term evolution MIMO technology and operate in multi-bands. Therefore, MIMO antennas are to use in future portable devices such as mobile handsets and tablets. A new multiple-input/multiple-output (MIMO) antenna design is introduced for future smartphones. The proposed design contains four pairs of double-fed circular-ring resonators located at different edges of the smartphone printed circuit board (PCB) with an FR-4 substrate and a dimension of 75 × 150 mm2. The antenna elements are fed by 50-Ohm microstriplines and provide polarisation and radiation pattern diversity function due to the orthogonal placement of their feed lines. By inserting a rectangular slot under each microstrip feed-line, the mutual coupling characteristic of the antenna ports is reduced. A good frequency bandwidth (S11 ≤ − 10 dB) of 3.3–3.9 GHz has been obtained for the smartphone antenna array. Nevertheless, for S11 ≤ −6 dB, this value is 3.1–4.3 GHz. More than 3 dB realised gain and 80% total efficiency are achieved for the single element radiator. The design provides not only sufficient radiation coverage supporting different sides of the mainboard but also the polarisation diversity. In addition, sufficient properties are obtained in the vicinity of human-hand/human-head. The proposed MIMO antenna design is also capable to generate dual- or multi-band function. Moreover, a new and compact phased array millimeter-wave (mm-wave) antenna design with end-fire radiation beams is introduced which can be easily integrated into smartphones.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
METHOD OF DESIGNING ANTENNAS BY SYNTHESIS OF A BAND FILTER
A novel antenna design technique is proposed, which offers bandwidth enhancement up to the limits defined by element radiation efficiency. The employed technique is referred as frequency pulling (FP) as it mimics the insertion loss design methodology of bandpass filters. This is essentially a wideband matching approach pushing the antenna efficiency to the limits set up by radiation efficiency. There are three options towards this trend: (1) first to enhance a single element bandwidth (compact element) exploiting its possibly multiple symmetrical feeding points as distinct resonator ports, (2) frequency pulled array as to design a small antenna array (less than about 10 elements) where eachelement acts as a resonator and (3) second order frequency-pulled array as to build a small array using compact elements of category (1). Similar to the band-pass filter design, all antennas or distinct-port circuits resonate at the same resonant frequency when isolated, cascading two or more of them; FP yields to multiple-overlapping successive resonances in their overall response. Although the proposed technique is general within this first effort, it is applied to simple patch antenna elements exhibiting multiple symmetrical feeding points, namely two-for rectangular, four-for square and five-for pentagonal. The third option is applied to an array of three compact 4-feeding point square elements offering triple bandwidth with respect to the already wideband single element. However, this is achieved at the expense of a significant beam squint. Thus, in general, these wideband compact elements should be used within a classical array design. Further bandwidth enhancement using FP to antenna elements with inherent multiple resonances as patches with slots or truncated edges constitutes our next task. Their inherent wider bandwidth in radiation efficiency is expected to allow multiply higher bandwidths when exploited with our FP technique.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
METHOD OF DESIGNING ANTENNAS BY SYNTHESIS OF A BAND FILTER
A novel antenna design technique is proposed, which offers bandwidth enhancement up to the limits defined by element radiation efficiency. The employed technique is referred as frequency pulling (FP) as it mimics the insertion loss design methodology of bandpass filters. This is essentially a wideband matching approach pushing the antenna efficiency to the limits set up by radiation efficiency. There are three options towards this trend: (1) first to enhance a single element bandwidth (compact element) exploiting its possibly multiple symmetrical feeding points as distinct resonator ports, (2) frequency pulled array as to design a small antenna array (less than about 10 elements) where eachelement acts as a resonator and (3) second order frequency-pulled array as to build a small array using compact elements of category (1). Similar to the band-pass filter design, all antennas or distinct-port circuits resonate at the same resonant frequency when isolated, cascading two or more of them; FP yields to multiple-overlapping successive resonances in their overall response. Although the proposed technique is general within this first effort, it is applied to simple patch antenna elements exhibiting multiple symmetrical feeding points, namely two-for rectangular, four-for square and five-for pentagonal. The third option is applied to an array of three compact 4-feeding point square elements offering triple bandwidth with respect to the already wideband single element. However, this is achieved at the expense of a significant beam squint. Thus, in general, these wideband compact elements should be used within a classical array design. Further bandwidth enhancement using FP to antenna elements with inherent multiple resonances as patches with slots or truncated edges constitutes our next task. Their inherent wider bandwidth in radiation efficiency is expected to allow multiply higher bandwidths when exploited with our FP technique.
- 1 October 2021
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 301 (5)
RESEARCH OF THE PROCEDURE OF INITIAL ACCESS TO THE FIFTH GENERATION COMMUNICATION NETWORK
Traditional mobile networks have bandwidth and infrastructure limitations. Each base station has a limited number of users and data capacity. 5G technology uses advanced technologies, such as massive MIMO and beamforming, to increase data rates and spectrum efficiency. These features, and the large number of small cells, allow many 5G users to receive low latency and high traffic without overloading the base station. Small cells work the same way as regular cells, but use new technology and millimetre waves (5G New Radio). Low-power base stations can be easily deployed. Cell search is a procedure by which the user equipment (UE) obtains time and frequency synchronization with the base station and decodes the cell ID of the mobile device. System information is broadcast information that is periodically transmitted by the base station on the downlink. This is very important information for the mobile device (UE) needed to connect to the base station (gNB). The UE reads system information to determine the location of mobile devices when turned on, to select and re-select a cell. System information provides the following information: system frame number, system bandwidth, PLMN, mobile subscriber selection and redial thresholds, etc., required to access the network. Physical Cell ID (PCI) is used to distinguish mobile devices in the network radio communication. PLMN (Public land Mobile Network) – mobile network service area. Is a set of all mobile devices of one cellular network operator. The UE scans the bandwidth in the sync raster. The synchronization raster indicates the frequency positions of the synchronization unit that can be used by the UE to detect the system when there is no explicit indication of the position of the synchronization unit. In the next step, the UE decodes the primary and secondary synchronization signals to obtain the Physical Cell ID (PCI) and the DMRS PBCH. The base station transmits SSB packets that contain one SSB per beam. The beam direction changes for each SSB transmission. The following steps are performed to complete the synchronization procedure. The UE selects the preferred beam and decodes the PBCH MIB information, such as SFN, SSB index, raster offset, default DL numerology, RMSI configuration, DM-RS location, and cell prohibition information. If the cell is not locked, the UE attempts to decode the physical downlink control channels (PDCCH) to obtain the frequency location of the PDSCH resources. A study of the model of restoring the synchronization of symbols and frames in the QPSK system, caused by a variable synchronization error. A study of the formation of the radio channel at the physical level.
- 1 October 2021
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 301 (5)
RESEARCH OF THE PROCEDURE OF INITIAL ACCESS TO THE FIFTH GENERATION COMMUNICATION NETWORK
Traditional mobile networks have bandwidth and infrastructure limitations. Each base station has a limited number of users and data capacity. 5G technology uses advanced technologies, such as massive MIMO and beamforming, to increase data rates and spectrum efficiency. These features, and the large number of small cells, allow many 5G users to receive low latency and high traffic without overloading the base station. Small cells work the same way as regular cells, but use new technology and millimetre waves (5G New Radio). Low-power base stations can be easily deployed. Cell search is a procedure by which the user equipment (UE) obtains time and frequency synchronization with the base station and decodes the cell ID of the mobile device. System information is broadcast information that is periodically transmitted by the base station on the downlink. This is very important information for the mobile device (UE) needed to connect to the base station (gNB). The UE reads system information to determine the location of mobile devices when turned on, to select and re-select a cell. System information provides the following information: system frame number, system bandwidth, PLMN, mobile subscriber selection and redial thresholds, etc., required to access the network. Physical Cell ID (PCI) is used to distinguish mobile devices in the network radio communication. PLMN (Public land Mobile Network) – mobile network service area. Is a set of all mobile devices of one cellular network operator. The UE scans the bandwidth in the sync raster. The synchronization raster indicates the frequency positions of the synchronization unit that can be used by the UE to detect the system when there is no explicit indication of the position of the synchronization unit. In the next step, the UE decodes the primary and secondary synchronization signals to obtain the Physical Cell ID (PCI) and the DMRS PBCH. The base station transmits SSB packets that contain one SSB per beam. The beam direction changes for each SSB transmission. The following steps are performed to complete the synchronization procedure. The UE selects the preferred beam and decodes the PBCH MIB information, such as SFN, SSB index, raster offset, default DL numerology, RMSI configuration, DM-RS location, and cell prohibition information. If the cell is not locked, the UE attempts to decode the physical downlink control channels (PDCCH) to obtain the frequency location of the PDSCH resources. A study of the model of restoring the synchronization of symbols and frames in the QPSK system, caused by a variable synchronization error. A study of the formation of the radio channel at the physical level.