IHIhor Hula

Ihor Hula

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ihor Hula has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Static Frequency-Based Canonical Coding as a Zero-Overhead Compression and Data Obfuscation Method for LoRaWAN IoT Sensors

    by Oleksiy Polikarovskykh, Ihor Hula

    This paper proposes Static Frequency-Based Canonical Coding (SFCC) and its obfuscating extension SFCC-S – lightweight lossless compression methods for numeric IoT sensor data transmitted over LoRaWAN networks. Classical adaptive compression algorithms such as Huffman coding require transmitting a frequency table or dictionary alongside the compressed payload, consuming 28 – 128 bytes of the constrained LoRaWAN SF12 payload limit of 51 bytes per packet. The proposed approach eliminates this overhead by pre-sharing a static canonical code table between the sensor node and the receiving server, directly extending the static-context philosophy of the IETF SCHC standard (RFC 9011) from network headers to application-layer payloads. SFCC assigns variable-length binary codewords to a 14-symbol numeric sensor alphabet based on expected symbol frequencies, achieving a coding efficiency of 96.3% relative to the Shannon entropy bound. When codebook overhead is included, SFCC reduces total transmitted bits by a factor of 2.97 compared to dynamic Huffman coding. Over a 24-hour IoT simulation at 60 measurements per hour, SFCC reduces the number of LoRaWAN packets by 52.4%, projecting approximately 2x improvement in battery lifetime. SFCC-S extends the base method with a zero-overhead symbol permutation that reduces the observability of payload structure; this mechanism does not provide cryptographic security but mitigates statistical and format-based information leakage in constrained LPWAN environments. Both methods require only a 32-entry static lookup table, making them suitable for any MCU-class device.

  • Open Access

    Порівняльний аналіз алгоритмів оцінки просторового спектру: переваги методу максимальної ентропії у радіопеленгуванні

    by О. І. Полікаровських, І. В. Гула

    У сучасних системах радіомоніторингу виникає суперечність між високою математичною складністю алгоритмів надрозрізнення та обмеженими ресурсами обчислювальної системи SDR. Традиційні програмні реалізації, що базуються на ітераційних циклах, призводять до надмірних обчислювальних затримок, що ускладнює роботу в режимі реального часу. Проблема загострюється при пеленгації в умовах щільної міської забудови, де обмежено апертуру антенної решітки та висока корельованість сигналів призводять до виродження коваріаційних матриць та розмиття просторових піків. Об’єктом дослідження є процес формування просторової спектральної оцінки широкосмугових сигналів. Методологія базується на порівняльному аналізі алгоритмів Bartlett, Capon, MUSIC та методу максимальної ентропії MEM. Авторами запропоновано зміну обчислювального підходу: перехід від скалярної обробки окремих елементів матриці оцінки до векторизованого тензорного ядра на основі нотації Ейнштейна. Для забезпечення стійкості розв’язків застосовано метод регуляризації Тихонова-Філіпса. Наукова новизна полягає у розробці та впровадженні тензорної архітектури обчислень для методу MEM, що забезпечило прискорення математичних операцій у десятки разів та вивільнення значних ресурсів ЦП. Експериментально підтверджено перевагу ентропійного підходу MEM: при роботі з малоелементними решітками він забезпечує на 15–20% вищу кутову селективність, ніж алгоритм MUSIC, при рівні шумової підлоги -20… -40 дБ. Інтеграція регуляризації Тихонова безпосередньо в тензорне ядро дозволила нівелювати вплив виродження матриць із середньоквадратичною похибкою на рівні 1,13⋅10−5, що гарантує стабільність пеленга на надкоротких вибірках. Доведено, що оптимізація обчислювального алгоритму шляхом використання тензорів дозволяє реалізувати методи надрозрізнення в режимі «жорсткого реального часу» на бюджетному обладнанні. Отримані результати дозволяють використовувати мобільні SDR-платформи для прецизійної радіопеленгації у складних завадових умовах без потреби в апаратних прискорювачах.

  • Open Access

    АПАРАТНО-ПРОГРАМНА РЕАЛІЗАЦІЯ АЛГОРИТМУ MUSIC У СИСТЕМІ РАДІОПЕЛЕНГАЦІЇ KERBEROSSDR З ОПТИМІЗАЦІЄЮ ФАЗОВОЇ КОГЕРЕНТНОСТІ

    by Олексій Полікаровських, Ігор Гула, Андрій Ткачук

    The paper addresses the practical challenges of implementing and optimizing a coherent radio direction finding (RDF) system based on the KerberosSDR platform. The study focuses on the modernization of the software stack to ensure full compatibility with modern computational environments and stable real-time signal processing. A significant part of the research is dedicated to achieving and maintaining strict phase coherence across four independent RTL-SDR channels, which is a fundamental prerequisite for high-resolution Direction of Arrival (DOA) estimation. The author performed a comprehensive refactoring of the system’s core modules, specifically addressing critical compatibility issues with contemporary NumPy and PyQt5 libraries, transitioning to updated complex number standards and modern graphical layout widgets. By adjusting the sampling rate to a fixed value of 1.024 MHz and optimizing the USB data stream, the study successfully eliminated sample drops and phase drifts that previously hindered the accuracy and reliability of the MUSIC (Multiple Signal Classification) algorithm. The experimental setup involved a 4-element uniform circular array (UCA) with an optimized element spacing of 0.333λ. This specific configuration was strategically chosen as a compromise to balance angular resolution and suppress spatial aliasing, ensuring stable performance especially in complex multipath environments typical for urban radio monitoring. Furthermore, the paper details a rigorous calibration protocol utilizing an internal noise source to synchronize the tuners at the hardware level. The results demonstrate that the implemented hardware-software complex provides stable and accurate azimuth estimation in the FM broadcast band. The research highlights the critical importance of proper noise-source calibration and precise physical antenna alignment–referencing the true North–for the reliability of the spatial pseudospectrum visualization. The findings offer a comprehensive practical roadmap for utilizing low-cost SDR hardware in professional-grade radio monitoring, signal intelligence, and electronic warfare training tasks, proving that software-level optimizations can significantly enhance the capabilities of budget-friendly hardware.

  • Open Access

    ФОРМУВАННЯ ФУНКЦІЇ НЕВИЗНАЧЕНОСТІ КОГЕРЕНТНОЇ ПОСЛІДОВНОСТІ ІМПУЛЬСІВ ЗА ДОПОМОГОЮ ЗВАЖУВАННЯ АМПЛІТУД КОМПОНЕНТІВ

    by Андрій Ткачук, Ігор Гула

    A uniformly spaced coherent train of pulses is commonly used in radar systems for improving Doppler resolution. The Doppler resolution is defined by the total coherent duration of the processed signal and can be very high for such sequences. But the ambiguity function of the pulse train still suffers from significant sidelobes. Transmitting the same signal periodically and then processing the returns coherently introduces large ambiguities in the matched filter delay-Doppler response, or the pulse train ambiguity function, which occur at multiples of pulse repetition interval along the delay axis and at multiples of pulse repetition frequency along Doppler. Thus, modifications are usually applied to reduce these sidelobes. Different parameters of the pulse train can be varied to optimize the ambiguity function and improve resolution properties. The most common way is by implementing interpulse amplitude weighting. In many works, exact analytical formulas for the ambiguity function of pulse sequences have been obtained, but they are quite cumbersome, so it is difficult to determine from them how exactly the sequence parameters affect the shape of the ambiguity function. In this paper, a simple analytical expression for the cross-section of the pulse train ambiguity function along the Doppler axis is obtained. It valid for zero time offset. It allows us to simply understand and clearly determine the effect of intra- and inter-pulse weighting on the shape of the ambiguity surface along the central Doppler frequency axis. It is shown by simulation that this effect is preserved for non-zero time offsets. The Hamming window was used in this paper to process the pulses. In the case of inter-pulse weighting, it applies to all pulses in the sequence. In the case of intra-pulse weighting, the amplitude of each pulse was varied using this window.

  • Open Access

    ІНТЕРФЕРОМЕТРИ У РАДІОСИСТЕМАХ ОХОРОНИ ПЕРИМЕТРУ НА БАЗІ ПРОГРАМНО-КОНФІГУРОВАНОГО РАДІО

    by Олексій Полікаровських, Ігор Гула, Віталій Гавронський

    У статті досліджено застосування програмно-конфігурованого радіо (SDR) у радіосистемах охорони периметру. Розглянуто інтерферометричний метод пеленгування як один із найточніших способів визначення напрямку на джерело радіовипромінювання. Проведено моделювання залежності кута приходу сигналу від різниці фаз для параметрів λ0=0,3 м і d=0,15 м, що відповідають частоті 1 ГГц. Отримані результати підтверджують ефективність SDR-реалізації пеленгатора для виявлення безпілотних літальних апаратів у системах охорони периметру.

  • Open Access

    Реалізація алгоритму пошуку кореляційного інтерферометричного пеленгатора засобами програмної платформи GNU радіо

    by Oleksiy Polikarovskykh, Ihor Hula

    In the realm of modern radio equipment development, the integration of Software Defined Radio (SDR) systems, encompassing both software and hardware components, has become widespread. SDR systems, particularly, find applications in the creation of direction finders for radio signal sources. The effectiveness of direction finding and the identification of radio radiation sources largely hinge on the technical specifications of the equipment. For contemporary systems aimed at detecting the location of radio radiation sources, direction finders based on a correlation interferometer prove to be highly suitable. These direction finders excel in performing direction finding for a wide array of radio signals, capable of recognizing broadband modulated signals. They can simultaneously process and identify several signals within a single frequency channel, originating either from a singular source of radio signals (coherent) or from multiple sources (incoherent). SDR technology enables programmable reconfiguration of a radio receiver through software. Such receivers boast a broadband radio frequency component with a significant dynamic range, a high-speed Analog-to-Digital Converter (ADC) path, a robust signal processor, and a specialized digital filtering path. SDR receivers are adaptable to signals of various standards and frequencies, depending on the specific tasks at hand. The GNU RADIO software platform stands out as the most flexible open-source software platform for SDR systems. This article delves into the utilization of the GNU RADIO software platform to implement the search algorithm for the direction finder of the correlation interferometer. The Ettus USRP N210 SDR platform was selected for implementing the direction finder using the correlation interferometer algorithm. This study introduces a two-channel software-controlled model of the direction finder, operating according to the correlation interferometer algorithm. The measurement results for the placement angle of radio signal sources yielded an individual absolute error ranging from 2 to 4 degrees, with an average absolute error of about 3 degrees. These results are quite commendable for such mobile two-channel systems. While systems with four or more channels boast higher accuracy, they tend to have lower economic feasibility.


  • METHOD OF DETERMINING PARAMETERS OF MODULATION OF UAV SIGNALS USING ARTIFICIAL NEURAL NETWORKS

    by Iho Hula, Khmelnytskyi National University, Oleksiy Polikarovskykh, Odessa National Maritime University

    The article is devoted to the consideration of the issue of determining the parameters of the modulation of signals of unmanned aerial vehicles using artificial neural networks by recognizing the types of digital modulation and is performed by a system that automatically classifies the type of digital modulation of the received signal. Recognition of digital modulation types is used, which automatically classifies the type of digital modulation of the received signal. The following issues are covered in the article: the analysis of existing approaches in the task of automatic recognition of types of digital modulation is carried out; the analysis and classification of informative features in the task of automatic recognition is carried out the following types of digital modulation: 2-PSK, 4-PSK, 8-PSK, 2-FSK, 8-QAM, 16-QAM, 64-QAM and OFDM. This article uses a neural network approach based on cumulative characteristics. To solve these problems, the methods of calculation and selection of informative cumulative features described in the developed model of the system of automatic recognition of digital modulation types by means of a neural network on cumulative features at a known value of carrier frequency are described. A model of the system of automatic recognition of digital modulation types at a known value is constructed carrier frequency. An algorithm for automatic recognition of digital modulation types has been developed using a multilayer neural network. The influence of noise in the communication channel on the probability of recognizing the types of digital modulation at a known value of the carrier frequency is investigated. It was found that regardless of the type of noise in the communication channel, the law of error distribution in IQ data becomes close to normal. This fact is one important argument for the use of cumulative features in the task of automatic recognition of types of digital modulation. Therefore, the task of automatic recognition of digital modulation types is quite relevant. Further research may be aimed at expanding the range of high-order cumulative features used, due to which it is possible to increase the probability of correct recognition of types of digital modulation, and solving the recognition problem at an unknown value of the frequency and initial phase of the carrier signal.

  • Open Access

    Comparative Study of DDS with Different Types of Phase Accumulators

    by Oleksiy Polikarovskykh, Lesia Karpova, Ihor Hula, Vasyl Melnychuk

    The paper deals with the problems of delayed transfer signals in the direct digital synthesizer (DDS) phase accumulator adders. Transfer delay is one of the factors that affect the maximum output frequency of the DDS synthesizer. The main types of adders used in DDS synthesizers are described. Separately, attention was paid to the adder with a consistent transfer of the transfer signal, adders with a transmission carry signal with a fixed block length, adders with a signal transmission delay with a variable block length, and a mathematical analysis of the origin and duration of the delay of the transfer signal in them. It was found that the use of a transfer adder with a variable length of a block in the core of a direct digital synthesizer would increase the maximum output frequency by 2.4 times compared to the adder with a parallel transfer, and by 1.43 times as compared with the adder with a fixed length the block.