Brett Hull
Brett Hull has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
D. Grider
Wolfspeed, A Cree Company
3 shared publications- Akin Akturk
CoolCAD Electronics LLC, College Park, MD, USA
2 shared publications D. J. Lichtenwalner
Wolfspeed, A Cree Company
2 shared publications- Daniel Lichtenwalner
Wolfspeed Inc., Durham, NC, USA
2 shared publications Edward Van Brunt
Wolfspeed Inc. , 4401 Silicon Drive, Durham, North Carolina 27703, USA
2 shared publicationsFatima Husna
Cree Incorporation
2 shared publications
Latest Publications
- Open Access
- 15 December 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (23)
Erratum: “Temperature dependence of avalanche breakdown in 4H-SiC devices” [J. Appl. Phys. 133, 235705 (2023)]
Two inadvertent errors in our paper1 have been brought to our attention by our readers. We want to correct them here. The corrections do not affect the general
- 15 December 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (23)
Open AccessErratum: “Temperature dependence of avalanche breakdown in 4H-SiC devices” [J. Appl. Phys. 133, 235705 (2023)]
Two inadvertent errors in our paper1 have been brought to our attention by our readers. We want to correct them here. The corrections do not affect the general
- Open Access
- 18 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (7) , 3848-3853
Improvements to the Analytical Model to Describe UIS Events
We generalize and refine an analytical model to describe unclamped inductive switching (UIS) events in power MOSFETs and derive a novel, fast method to extract thermal impedance and series resistance from the UIS waveform. We show excellent agreement between model and measurement for SiC MOSFETs. The method allows for the comparison of thermal impedance measurements of packaged parts to that of formerly not easily accessible waferlevel die. The model allows to evaluate UIS ruggedness and provides insight into the nature of ruggedness limitations. A figure of merit for UIS ruggedness is provided and different MOSFET architectures are compared with respect to UIS ruggedness.
- 18 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (7) , 3848-3853
Open AccessImprovements to the Analytical Model to Describe UIS Events
We generalize and refine an analytical model to describe unclamped inductive switching (UIS) events in power MOSFETs and derive a novel, fast method to extract thermal impedance and series resistance from the UIS waveform. We show excellent agreement between model and measurement for SiC MOSFETs. The method allows for the comparison of thermal impedance measurements of packaged parts to that of formerly not easily accessible waferlevel die. The model allows to evaluate UIS ruggedness and provides insight into the nature of ruggedness limitations. A figure of merit for UIS ruggedness is provided and different MOSFET architectures are compared with respect to UIS ruggedness.
- 27 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 66 (7) , 1828-1832
Predicting Cosmic Ray-Induced Failures in Silicon Carbide Power Devices
phenomenological expression for predicting atmospheric neutron induced failure rates in silicon carbide power devices is presented. This expression that relates local electric field to terrestrial neutron induced failure rate is derived using empirical data that show commonalities between failures of different silicon carbide power devices under this type of radiation. We also present a physics based approach that provides a similar functional form for predicting these failure rates. The proposed closed form expression is then used to demonstrate use of this model in predicting failure rates in a hypothetical silicon carbide power device modeled using a technology computer aided design tool.
- 27 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 66 (7) , 1828-1832
Predicting Cosmic Ray-Induced Failures in Silicon Carbide Power Devices
phenomenological expression for predicting atmospheric neutron induced failure rates in silicon carbide power devices is presented. This expression that relates local electric field to terrestrial neutron induced failure rate is derived using empirical data that show commonalities between failures of different silicon carbide power devices under this type of radiation. We also present a physics based approach that provides a similar functional form for predicting these failure rates. The proposed closed form expression is then used to demonstrate use of this model in predicting failure rates in a hypothetical silicon carbide power device modeled using a technology computer aided design tool.
- 7 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 65 (6) , 1248-1254
Terrestrial Neutron-Induced Failures in Silicon Carbide Power MOSFETs and Diodes
Investigations of terrestrial neutron radiation induced failures in silicon carbide power MOSFETs and diodes indicate that the failures are related to a hole initiated impact ionization process followed by a thermal transient resulting in loss of device voltage blocking ability due to the damage of lattice along a filament within the device volume. Irrespective of device type, MOSFET or diode, the start of these failures exhibit the same characteristics, and can be mitigated by decrease of field in device off state. These failures with origins in impact ionization and fast thermal transients are fundamentally different from those of bipolar burn-out events, observed in silicon power devices. Additionally, once a failure event starts, the failure ends with all terminals shorting.
- 7 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 65 (6) , 1248-1254
Terrestrial Neutron-Induced Failures in Silicon Carbide Power MOSFETs and Diodes
Investigations of terrestrial neutron radiation induced failures in silicon carbide power MOSFETs and diodes indicate that the failures are related to a hole initiated impact ionization process followed by a thermal transient resulting in loss of device voltage blocking ability due to the damage of lattice along a filament within the device volume. Irrespective of device type, MOSFET or diode, the start of these failures exhibit the same characteristics, and can be mitigated by decrease of field in device off state. These failures with origins in impact ionization and fast thermal transients are fundamentally different from those of bipolar burn-out events, observed in silicon power devices. Additionally, once a failure event starts, the failure ends with all terminals shorting.
- 29 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 65 (1) , 256-261
Single-Event Burnout of SiC Junction Barrier Schottky Diode High-Voltage Power Devices
Ion-induced degradation and catastrophic failures in high-voltage SiC junction barrier Schottky power diodes are investigated. The experimental results agree with earlier data showing discrete jumps in leakage current for individual ions and show that the boundary between leakage current degradation and a single-event-burnout-like effect is a strong function of linear energy transfer and reverse bias. TCAD simulations show high localized electric fields under the Schottky junction, and high temperatures generated directly under the Schottky contact, consistent with the hypothesis that the ion energy causes eutectic-like intermixture at the metal-semiconductor interface or localized melting of the silicon carbide lattice.
- 29 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 65 (1) , 256-261
Single-Event Burnout of SiC Junction Barrier Schottky Diode High-Voltage Power Devices
Ion-induced degradation and catastrophic failures in high-voltage SiC junction barrier Schottky power diodes are investigated. The experimental results agree with earlier data showing discrete jumps in leakage current for individual ions and show that the boundary between leakage current degradation and a single-event-burnout-like effect is a strong function of linear energy transfer and reverse bias. TCAD simulations show high localized electric fields under the Schottky junction, and high temperatures generated directly under the Schottky contact, consistent with the hypothesis that the ion energy causes eutectic-like intermixture at the metal-semiconductor interface or localized melting of the silicon carbide lattice.
- 2 March 2009
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 615-617, 749-752
Performance of 60 A, 1200 V 4H-SiC DMOSFETs
Large area (8 mm x 7 mm) 1200 V 4H-SiC DMOSFETs with a specific on-resistance as low as 9 m•cm2 (at VGS = 20 V) able to conduct 60 A at a power dissipation of 200 W/cm2 are presented. On-resistance is fairly stable with temperature, increasing from 11.5 m•cm2 (at VGS = 15 V) at 25°C to 14 m•cm2 at 150°C. The DMOSFETs exhibit avalanche breakdown at 1600 V with the gate shorted to the source, although sub-breakdown leakage currents up to 50 A are observed at 1200 V and 200°C due to the threshold voltage lowering with temperature. When switched with a clamped inductive load circuit from 65 A conducting to 750 V blocking, the turn-on and turn-off energies at 150°C were less than 4.5 mJ.
- 2 March 2009
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 615-617, 749-752
Performance of 60 A, 1200 V 4H-SiC DMOSFETs
Large area (8 mm x 7 mm) 1200 V 4H-SiC DMOSFETs with a specific on-resistance as low as 9 m•cm2 (at VGS = 20 V) able to conduct 60 A at a power dissipation of 200 W/cm2 are presented. On-resistance is fairly stable with temperature, increasing from 11.5 m•cm2 (at VGS = 15 V) at 25°C to 14 m•cm2 at 150°C. The DMOSFETs exhibit avalanche breakdown at 1600 V with the gate shorted to the source, although sub-breakdown leakage currents up to 50 A are observed at 1200 V and 200°C due to the threshold voltage lowering with temperature. When switched with a clamped inductive load circuit from 65 A conducting to 750 V blocking, the turn-on and turn-off energies at 150°C were less than 4.5 mJ.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 253-255
State of the Art 10 kV NMOS Transistors
Rapidly improving 4 H-SiC material quality and a maturing MOS process/design have enabled the development of the largest 10 kV MOSFET to date and the first 10 kV n-IGBT capable of flowing 10 A and 4 A, respectively, with very low on- resistances. With 20 V on the gate, both devices have aVp~ 5V with a positive temperature coefficient for on-resistance that facilitates their use in a parallel configuration. Each device has its own advantages. The conductivity modulated n-IGBT offers higher current density operation (up to 100 A/cm ) while the majority carrier MOSFET offers extremely fast 5 kV switching with only 140 nsec of turn-off time and a manageable 160 W/cm of dissipated power at 20 kHz. These exciting results indicate that the 10 kV SiC NMOS switches may potentially revolutionize emerging high voltage, high frequency power electronics.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 253-255
State of the Art 10 kV NMOS Transistors
Rapidly improving 4 H-SiC material quality and a maturing MOS process/design have enabled the development of the largest 10 kV MOSFET to date and the first 10 kV n-IGBT capable of flowing 10 A and 4 A, respectively, with very low on- resistances. With 20 V on the gate, both devices have aVp~ 5V with a positive temperature coefficient for on-resistance that facilitates their use in a parallel configuration. Each device has its own advantages. The conductivity modulated n-IGBT offers higher current density operation (up to 100 A/cm ) while the majority carrier MOSFET offers extremely fast 5 kV switching with only 140 nsec of turn-off time and a manageable 160 W/cm of dissipated power at 20 kHz. These exciting results indicate that the 10 kV SiC NMOS switches may potentially revolutionize emerging high voltage, high frequency power electronics.