Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Kwangsoo Kim has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • In-Situ Encrypted NAND FeFET Array for Secure Storage and Compute-in-Memory

    by Zijian Zhao, Yixin Xu, James Read, Po-Kai Hsu, Yixin Qin, Tzu-Jung Huang, Suhwan Lim, Kijoon Kim, Kwangsoo Kim, Wanki Kim, et al.

    In this work, we present a lightweight in-situ encryption/decryption technique for high-density NAND memory, aiming to meet the growing need for data privacy and security in storage and computing applications. Using ferroelectric FET (FeFET) as a technology platform for demonstration, we show that: i) using a XOR-based cipher, the encryption/decryption can be simply mapped to in-situ array operations, where the encrypted cipher texts are stored as complementary threshold voltage (V TH ) states of two consecutive FeFETs in a NAND string and decryption can be simply realized through read operations with key-dependent read gate biases; ii) the proposed technique is scalable to multi-level cells (MLC) by encrypting and decrypting bit-by-bit, thereby significantly increasing the encrypted memory density; iii) a unique advantage of applying XOR-based cipher on NAND array is its capability of supporting high-density and secure compute-in-memory (CiM) (e.g., matrix vector multiplication) with encrypted weights, which is beyond the capability of conventional advanced encryption standard (AES) engine; iv) with integrated NAND FeFET array, we have successfully demonstrated encryption and decryption operations of single-level cell (SLC), MLC, and CiM, showing great promise of the technique.


  • Open Access

    Electrical Characterization by Counter-Doped Pocket Design in Tunnel FETs

    by Ki Ryung Nam, Kwang Soo Kim, Woo Young Choi

    The effects of low net-doped region on the electrical performance of tunnel field-effect transistors (TFETs) are investigated using TCAD simulation. Compared with previous studies, it is observed that the low net-doped region between the source and pocket can enhance TFET electrical characteristics such as on-current ( I on ) and subthreshold swing (SS) with fine on-off current ratio ( I on / I off ). By optimizing the length of the low net-doped region, I on increased 14.6 times and the SS is reduced by 34.6 % compared with the TFET where the low net-doped region was not considered. Furthermore, guidelines for designing counter-doped pocket are proposed considering the low net-doped region. The local minimum in the conduction band can be used to further improve the on-current and SS performance by adjusting the pocket width and doping concentration. To avoid pocket-induced SS degradation, the pocket doping concentration must also be taken into account when determining the optimal value of the pocket width and vice versa.


  • Open Access

    A Novel 4H-SiC Double Trench MOSFET with Built-In MOS Channel Diode for Improved Switching Performance

    by Jaeyeop Na, Kwangsoo Kim

    This study proposed a novel 4H-SiC double trench metal-oxide-semiconductor field-effect-transistor (DTMCD-MOSFET) structure with a built-in MOS channel diode. Further, its characteristics were analyzed using TCAD simulation. The DTMCD-MOSFET comprised active and dummy gates that were divided horizontally; the channel diode operated through the dummy gate and the p-base and N+ source regions at the bottom of the dummy gate. Because the bult-in channel diode was positioned at the bottom, the DTMCD-MOSEFT minimized static deterioration. Despite having a 5.2% higher specific on-resistance (Ron-sp) than a double-trench MOSFET (DT-MOSFET), the DTMCD-MOSFET exhibited a significantly superior body diode and switching properties. In comparison to the DT-MOSFET, its turn-on voltage (VF) and reverse recovery charge (Qrr) were decreased by 27.2 and 30.2%, respectively, and the parasitic gate-drain capacitance (Crss) was improved by 89.4%. Thus, compared with the DT-MOSFET, the total switching energy loss (Etot) was reduced by 41.4%.


  • Open Access

    High Performance 3.3 kV SiC MOSFET Structure with Built-In MOS-Channel Diode

    by Jaeyeop Na, Minju Kim, Kwangsoo Kim

    Built-in freewheeling diode metal–oxide–semiconductor field-effect transistors (MOSFETs) that ensure high performance and reliability at high voltages are crucial for chip integration. In this study, a 4H–SiC built-in MOS-channel diode MOSFET with a center P+ implanted structure (CIMCD–MOSFET) is proposed and simulated via technology computer-aided design (TCAD). The CIMCD–MOSFET contains a P+ center implant region, which protects the gate oxide edge from high electric field crowding. Moreover, the region also makes it possible to increase the junction FET (JFET) and N-drift doping concentration of the device by dispersing the high electric field. Consequently, the CIMCD–MOSFET is stable even at a high voltage of 3.3 kV without static degradation and gate oxide reliability issues. The CIMCD–MOSFET also has higher short-circuit withstanding capability owing to the low saturation current and improved switching characteristics due to the low gate-drain capacitance, compared to the conventional MOSFET (C–DMOSFET) and the built-in Schottky barrier diode MOSFET (SBD–MOSFET). The total switching time of a CIMCD–MOSFET is reduced by 52.2% and 42.2%, and the total switching loss is reduced by 67.8% and 41.8%, respectively, compared to the C–DMOSFET and SBD–MOSFET.


  • High performance 4H-SiC MOSFET with deep source trench

    by Jaeyeop Na, Jinhee Cheon, Kwangsoo Kim

    In this study, we investigated a 4H-SiC deep source trench metal-oxide semiconductor field-effect transistor (DST-MOSFET) using technology computer-aided design numerical simulations. The proposed DST-MOSFET comprises a P-pillar formed along with the DST and a side P+ shielding region (SPR), which replaces the gate trench bottom SPR. Owing to the superjunction generated by the P-pillar and N-drift region, the static characteristics of the DST-MOSFET were superior to those of the trench gate MOSFET (UMOSFET) and double-trench MOSFET (DT-MOSFET). The specific on-resistance and Baliga’s figure of merit of DST-MOSFET improved by 9% and 104%, respectively, in comparison with those of UMOSFET; and by 37% and 64%, respectively, compared to those of DT-MOSFET. Additionally, the SPR reduced the gate-to-drain capacitance of the DST-MOSFET and improved the switching characteristics. Consequently, the total switching energy loss of the proposed DST-MOSFET reduced by 63% and 47% in comparison with those of the UMOSFET and DT-MOSFET, respectively.


  • Single-Event Burnout Hardening 4H-SiC UMOSFET Structure

    by Junghun Kim, Kwangsoo Kim

    In this paper, we propose 4H-SiC UMOSFET structure with improved single-event burnout (SEB) hard-ening characteristics, and compare it with the conventional UMOSFET structure by conducting numerical technology computer-aided design (TCAD) simulations. The SEB safe operating areas are extracted when heavy ions with dif-ferent linear energy transfer (LET) collide with the device. Because integrated heterojunction diode (HJD) in pro-posed structure features hole collection effect due to the difference of the valence band energy level, the generated hole current can be leaked off efficiently. With a LET value of 0.01 0.09 pC/μm, the proposed MOSFET has 25% higher SEB threshold voltage than conventional MOSFET due to the suppressed parasitic BJT operation. Therefore, proposed structure can provide superior SEB viability for space and atmospheric applications.


  • Open Access

    A 1.2 kV SiC MOSFET with Integrated Heterojunction Diode and P-shield Region

    by Jongwoon Yoon, Jaeyeop Na, Kwangsoo Kim

    A 1.2 kV SiC MOSFET with an integrated heterojunction diode and p-shield region (IHP-MOSFET) was proposed and compared to a conventional SiC MOSFET (C-MOSFET) using numerical TCAD simulation. Due to the heterojunction diode (HJD) located at the mesa region, the reverse recovery time and reverse recovery charge of the IHP-MOSFET decreased by 62.5% and 85.7%, respectively. In addition, a high breakdown voltage (BV) and low maximum oxide electric field (EMOX) could be achieved in the IHP-MOSFET by introducing a p-shield region (PSR) that effectively disperses the electric field in the off-state. The proposed device also exhibited 3.9 times lower gate-to-drain capacitance (CGD) than the C-MOSFET due to the split-gate structure and grounded PSR. As a result, the IHP-MOSFET had electrically excellent static and dynamic characteristics, and the Baliga’s figure of merit (BFOM) and high frequency figure of merit (HFFOM) were increased by 37.1% and 72.3%, respectively. Finally, the switching energy loss was decreased by 59.5% compared to the C-MOSFET.


  • High-performance SiC MOSFET embedded heterojunction diode with electric field protection region

    by Jongwoon Yoon, Kwangsoo Kim

    In this study, we proposed high-performance SiC metal-oxide-semiconductor field effect transistors (MOSFETs) embedded heterojunction diode (HJD) with an electric field protection (EFP) region and analyzed it using a Sentaurus TCAD simulation. The proposed device features an HJD positioned at the trench side wall in the middle of the junction field effect transistor region and a highly doped EFP region under the P+ polysilicon to features excellent static performance and high reliability. The simulation results revealed that the maximum oxide electric field (E MOX) and the Baliga’s figure-of-merit improved by 54% and 12%, respectively, compared with those of conventional SiC MOSFETs (C-MOSFETs). In addition, the EFP region suppressed the drain induced barrier lowering effect and leakage current in the HJD interface sufficiently. The HJD suppressed the bipolar degradation of the PiN body diode effectively due to its low V F (1.75 V). In addition, the proposed device demonstrated superior reverse-recovery characteristics, thereby improving t rr and Q rr by 35% and 57%, respectively, compared to the corresponding values in C-MOSFET. Moreover, the input capacitance (C ISS) was reduced by 17.5%, and C GD was reduced by 96%. Therefore, the high-frequency figure-of-merit improved by a factor of 25.8 in terms of R ON × C GD. As a result, the proposed device is a promising structure for high-frequency and high-reliability applications.


  • Open Access

    Asymmetric Split-Gate 4H-SiC MOSFET with Embedded Schottky Barrier Diode for High-Frequency Applications

    by Kyuhyun Cha, Kwangsoo Kim

    4H-SiC Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs) with embedded Schottky barrier diodes are widely known to improve switching energy loss by reducing reverse recovery characteristics. However, it weakens the static characteristics such as specific on-resistance and breakdown voltage. To solve this problem, in this paper, an Asymmetric 4H-SiC Split Gate MOSFET with embedded Schottky barrier diode (ASG-MOSFET) is proposed and analyzed by conducting a numerical TCAD simulation. Due to the asymmetric structure of ASG-MOSFET, it has a relatively narrow junction field-effect transistor width. Therefore, despite using the split gate structure, it effectively protects the gate oxide by dispersing the high drain voltage. The Schottky barrier diode (SBD) is also embedded next to the gate and above the Junction Field Effect transistor (JFET) region. Accordingly, since the SBD and the MOSFET share a current path, the embedded SBD does not increase in RON,SP of MOSFET. Therefore, ASG-MOSFET improves both static and switching characteristics at the same time. As a result, compared to the conventional 4H-SiC MOSFET with embedded SBD, Baliga′s Figure of Merit is improved by 17%, and the total energy loss is reduced by 30.5%, respectively.


  • Open Access

    A Novel MOS-Channel Diode Embedded in a SiC Superjunction MOSFET for Enhanced Switching Performance and Superior Short Circuit Ruggedness

    by Jongwoon Yoon, Kwangsoo Kim

    In this study, a novel MOS-channel diode embedded in a SiC superjunction MOSFET (MCD SJ-MOSFET) is proposed and analyzed by means of numerical TCAD simulations. Owing to the electric field shielding effect of the P+ body and the P-pillar, the channel diode oxide thickness (tco) of MCD can be set to very thin while achieving a low maximum oxide electric field (EMOX) under 3 MV/cm. Therefore, the turn-on voltage (VF) of the proposed structure was 1.43 V, deactivating the parasitic PIN body diode. Compared with the SJ-MOSFET, the reverse recovery time (trr) and the reverse recovery charge (Qrr) were improved by 43% and 59%, respectively. Although there is a slight increase in specific on-resistance (RON), the MCD SJ-MOSFET shows very low input capacitance (CISS) and gate to drain capacitance (CGD) due to the reduced active gate. Therefore, significantly improved figures of merit RON × CGD by a factor of 4.3 are achieved compared to SJ-MOSFET. As a result, the proposed structure reduced the switching time as well as the switching energy loss (ESW). Moreover, electro-thermal simulation results show that the MCD SJ-MOSFET has a short circuit withstand time (tSC) more than twice that of the SJ-MOSFET at various DC bus voltages (400 and 600 V).