Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jaeyeop Na has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Novel 4H-SiC Double Trench MOSFET with Built-In MOS Channel Diode for Improved Switching Performance

    by Jaeyeop Na, Kwangsoo Kim

    This study proposed a novel 4H-SiC double trench metal-oxide-semiconductor field-effect-transistor (DTMCD-MOSFET) structure with a built-in MOS channel diode. Further, its characteristics were analyzed using TCAD simulation. The DTMCD-MOSFET comprised active and dummy gates that were divided horizontally; the channel diode operated through the dummy gate and the p-base and N+ source regions at the bottom of the dummy gate. Because the bult-in channel diode was positioned at the bottom, the DTMCD-MOSEFT minimized static deterioration. Despite having a 5.2% higher specific on-resistance (Ron-sp) than a double-trench MOSFET (DT-MOSFET), the DTMCD-MOSFET exhibited a significantly superior body diode and switching properties. In comparison to the DT-MOSFET, its turn-on voltage (VF) and reverse recovery charge (Qrr) were decreased by 27.2 and 30.2%, respectively, and the parasitic gate-drain capacitance (Crss) was improved by 89.4%. Thus, compared with the DT-MOSFET, the total switching energy loss (Etot) was reduced by 41.4%.


  • Open Access

    High Performance 3.3 kV SiC MOSFET Structure with Built-In MOS-Channel Diode

    by Jaeyeop Na, Minju Kim, Kwangsoo Kim

    Built-in freewheeling diode metal–oxide–semiconductor field-effect transistors (MOSFETs) that ensure high performance and reliability at high voltages are crucial for chip integration. In this study, a 4H–SiC built-in MOS-channel diode MOSFET with a center P+ implanted structure (CIMCD–MOSFET) is proposed and simulated via technology computer-aided design (TCAD). The CIMCD–MOSFET contains a P+ center implant region, which protects the gate oxide edge from high electric field crowding. Moreover, the region also makes it possible to increase the junction FET (JFET) and N-drift doping concentration of the device by dispersing the high electric field. Consequently, the CIMCD–MOSFET is stable even at a high voltage of 3.3 kV without static degradation and gate oxide reliability issues. The CIMCD–MOSFET also has higher short-circuit withstanding capability owing to the low saturation current and improved switching characteristics due to the low gate-drain capacitance, compared to the conventional MOSFET (C–DMOSFET) and the built-in Schottky barrier diode MOSFET (SBD–MOSFET). The total switching time of a CIMCD–MOSFET is reduced by 52.2% and 42.2%, and the total switching loss is reduced by 67.8% and 41.8%, respectively, compared to the C–DMOSFET and SBD–MOSFET.


  • Open Access

    A 1.2 kV SiC MOSFET with Integrated Heterojunction Diode and P-shield Region

    by Jongwoon Yoon, Jaeyeop Na, Kwangsoo Kim

    A 1.2 kV SiC MOSFET with an integrated heterojunction diode and p-shield region (IHP-MOSFET) was proposed and compared to a conventional SiC MOSFET (C-MOSFET) using numerical TCAD simulation. Due to the heterojunction diode (HJD) located at the mesa region, the reverse recovery time and reverse recovery charge of the IHP-MOSFET decreased by 62.5% and 85.7%, respectively. In addition, a high breakdown voltage (BV) and low maximum oxide electric field (EMOX) could be achieved in the IHP-MOSFET by introducing a p-shield region (PSR) that effectively disperses the electric field in the off-state. The proposed device also exhibited 3.9 times lower gate-to-drain capacitance (CGD) than the C-MOSFET due to the split-gate structure and grounded PSR. As a result, the IHP-MOSFET had electrically excellent static and dynamic characteristics, and the Baliga’s figure of merit (BFOM) and high frequency figure of merit (HFFOM) were increased by 37.1% and 72.3%, respectively. Finally, the switching energy loss was decreased by 59.5% compared to the C-MOSFET.


  • Open Access

    4H-SiC Double Trench MOSFET with Split Heterojunction Gate for Improving Switching Characteristics

    by Jaeyeop Na, Jinhee Cheon, Kwangsoo Kim

    In this paper, a novel 4H-SiC split heterojunction gate double trench metal-oxide-semiconductor field-effect transistor (SHG-DTMOS) is proposed to improve switching speed and loss. The device modifies the split gate double trench MOSFET (SG-DTMOS) by changing the N+ polysilicon split gate to the P+ polysilicon split gate. It has two separate P+ shielding regions under the gate to use the P+ split polysilicon gate as a heterojunction body diode and prevent reverse leakage `current. The static and most dynamic characteristics of the SHG-DTMOS are almost like those of the SG-DTMOS. However, the reverse recovery charge is improved by 65.83% and 73.45%, and the switching loss is improved by 54.84% and 44.98%, respectively, compared with the conventional double trench MOSFET (Con-DTMOS) and SG-DTMOS owing to the heterojunction.