MKMelissa E. Kreider

Melissa E. Kreider

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Melissa E. Kreider has a total of 140 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The ionomer as an oxygen evolution reaction promoter: piperidinium’s impact on mechanistic pathways on NiO, IrO 2 , and Fe–NiO

    by Mai-Anh Ha, Emily K Volk, Melissa E Kreider, Shaun M Alia

    The commercial viability of anion exchange membrane (AEM) electrolysis requires optimization of various stack components, with specific catalyst-ionomer combinations often yielding higher current densities, lowered Tafel slopes, and improved mass activity. In this joint theoretical-experimental study, theoretical calculations detail the impact of Versogen’s piperidinium functional group on the complex, kinetically limiting oxygen evolution reaction, finding that the functional group can act as a promoter of specific steps (O*/O 2 * formation; H 2 O/O 2 desorption with reaction enthalpies ranging between 0.2–0.6 eV at higher coverages of O x H y intermediates) on NiO and NiFeO x catalysts. In particular, Fe sites on the NiFeO x catalyst facilitate concerted mechanisms of O*/O 2 * formation and H 2 O desorption with a low enthalpy of 0.5 eV; O 2 desorption alone requires only 0.3 eV. In contrast, Versogen-IrO 2 results in stronger Ir–O bonds, where the enthalpies for bond breaking (Ir–OH 2 and Ir–O 2 ) are considerably higher (1.4 eV and 1.6 eV, respectively). Rotating disk electrode studies utilized commercially available NiO and IrO 2 and synthesized 7.5 wt % Fe in NiFeO x catalysts in combination with Versogen, a common AEM ionomer, and Nafion, an alternative binder. Electrochemical testing validated the impact of these mechanistic changes on ionomer-catalyst combinations, finding that Versogen particularly activates NiO and NiFeO x compared to IrO 2 . Following a 13.5 h hold at 1.8 V, mass activities and Tafel slopes improved to 34 ± 13 A g −1 and 79 ± 2 mV dec −1 (NiO) and 82 ± 4.9 A g −1 and 72 ± 2 mV dec −1 (NiFeO x ). In contrast, Versogen-IrO 2 only reached 17 ± 2.9 A g −1 and 81 ± 3 mV dec −1 . Optimization of the ionomer-catalyst can yield significant increases in performance from initial activity and after an electrochemical conditioning procedure: this enhancement to the mass activity resulted in a 200.9 ± 106.1% improvement for Versogen-NiFeO x and 1284.2 ± 260.5% for Versogen-NiO. In contrast, Nafion-NiFeO x and -NiO offered moderate improvements of 39.1 ± 30.5% and 120.9 ± 59.1%, respectively.


  • Open Access

    Designing the Platinum Catalyst Layer for Improved Performance and Durability in Anion Exchange Membrane Water Electrolysis

    by Melissa E. Kreider, Ambar R. Maldonado Santos, Arielle L. Clauser, Sarah A. Berlinger, Mai-Anh Ha, Emily K. Volk, Zachary Rasmussen, Megan Bassinger, Laura Catalina Cruz, Carlos M. Baez-Cotto, et al.

    To lower the cost of hydrogen produced by anion exchange membrane water electrolysis (AEMWE), it is critical to reduce the use of platinum group metal (PGM) catalysts within the device. While iridium has been successfully replaced with PGM-free catalysts at the anode, platinum-based (Pt) cathode catalysts are still required to meet the activity and durability targets. This study investigates the impact of commercial Pt/C catalyst loading, ionomer type and content, and electrode fabrication method on the cathode catalyst layer properties and AEMWE performance with the aim of determining the feasibility of reduced Pt loadings. While increased Pt loading is found to improve beginning-of-life performance, the effects are minimal above 0.6 mg/cm2. Ink characterization shows that ionomer type and content affect the ink stability, particle size, and percent of unbound ionomer, which further impact the homogeneity of the sprayed catalyst layers. The 5% PiperION cathode exhibited the highest performance, which may be attributed to a balance between the small particle size and the low proportion of unbound ionomer, minimizing kinetic and transport losses. Theoretical calculations show that the ionomers interact differently with the Pt surface, causing different surface charges and water adsorption strength and activating different mechanisms for hydrogen evolution. Pt-PiperION lowered the enthalpy of water-splitting by 0.1 eV compared to Pt alone and allowed for equal site access between adsorbed H* and OH* (both adsorbed at circa -2.2 eV). Although catalyst-coated membrane (CCM) fabrication techniques are desirable for scale-up, no performance enhancement is observed compared with the catalyst-coated substrate approach. Durability, as measured by degradation rates, Pt loss, and catalyst layer restructuring, was found to improve with increased Pt loadings, higher ionomer content, and CCM architectures. These findings provide important insight into the significant role of the cathode in AEMWE and strategies for maintaining the performance with low Pt loading or PGM-free catalysts.


  • Open Access

    Voltage breakdown analyses in anion exchange membrane water electrolysis – the contributions of catalyst layer resistance on overall overpotentials

    by Emily K. Volk, Elliot Padgett, Melissa E. Kreider, Stephanie Kwon, Shaun M. Alia

    This perspective discusses the origins of catalyst layer resistance in anion exchange membrane water electrolyzers and outlines a strategy to deconvolute cell overpotentials.


  • A research database for experimental electrocatalysis: Advancing data sharing and reusability

    by Ruchika Mahajan, Ashton M. Aleman, Colin F. Crago, Suman Bhasker-Ranganath, Melissa E. Kreider, Jose A. Zamora Zeledon, Johanna Schröder, Gaurav A. Kamat, McKenzie A. Hubert, Adam C. Nielander, et al.

    The availability of high-fidelity catalysis data is essential for training machine learning models to advance catalyst discovery. Furthermore, the sharing of data is crucial to ensure the comparability of scientific results. In electrocatalysis, where complex experimental conditions and measurement uncertainties pose unique challenges, structured data collection and sharing are critical to improving reproducibility and enabling robust model development. Addressing these challenges requires standardized approaches to data collection, metadata inclusion, and accessibility. To support this effort, we have developed an extensive data infrastructure that curates and organizes multimodal data from electrocatalysis experiments, making them openly available through the catalysis-hub.org platform. Our datasets, comprising 241 experimental entries, provide detailed information on reaction conditions, material properties, and performance metrics, ensuring transparency and interoperability. By structuring electrocatalysis data in web-based as well as machine-readable formats, we aim to bridge the gap between experimental and computational research, allowing for improved benchmarking and predictive modeling. This work highlights the importance of well-structured, accessible data in overcoming reproducibility challenges and advancing machine learning applications in catalysis. The framework we present lays the foundation for future data-driven research in electrocatalysis and offers a scalable model for other experimental disciplines.


  • Open Access

    Electrochemical Activation of Ni–Fe Oxides for the Oxygen Evolution Reaction in Alkaline Media

    by Emily K. Volk, Melissa E. Kreider, Daniella M. Gibson Colón, Magdalena Müller, Svein Sunde, Shaun M. Alia, Stephanie Kwon

    The oxygen evolution reaction (OER) is essential to many key electrochemical devices, including H2O electrolyzers, CO2 electrolyzers, and metal–air batteries. NiFe oxides have been historically identified as active for the OER, though they have been less studied in their more commercially relevant bulk oxide forms, such as NiFe2O4. Past works have demonstrated that the initial starting phase of Ni­(Fe) precatalysts can influence their activation to the Ni­(Fe)­OOH active phase, including the rate and degree of conversion, pointing to the necessity of understanding activation protocols and in situ characteristics of catalyst materials at the device level. In this work, we investigate the characteristics of commercially relevant NiFe bulk oxides (NiFe2O4 and a physical mixture of NiO and γ-Fe2O3) during multiple activation procedures. Our results demonstrate that significant performance enhancement is observed for these bulk oxides regardless of the Fe incorporation in the initial form (i.e., atomically or macroscopically integrated), leading to significant performance enhancement (up to 30×) over time on stream. We hypothesize that this activation is due to the formation of NiFeOOH active sites on the surface, supported by in situ cyclic voltammetry and Raman spectroscopy results. We further show that not only the starting material but also the method of activation influences the number of Ni­(Fe)­OOH active sites formed and suggest that these sites can be quantified from the Ni2+ to Ni3+ redox transition using cyclic voltammetry. Broadly, this work demonstrates the necessity of in situ characterization of catalyst materials for cell-level design and testing.


  • Open Access

    Editors’ Choice—Rapid Deactivation Convolutes Electrochemical CO2 Reduction Selectivity Measurements on Gold Rotating Ring Disk Electrodes

    by Maria Kelly, Rachel A. Wnuk, Recep Kas, Glenn Teeter, Melissa E. Kreider, Wilson A. Smith

    Voltammetric measurements of electrochemical CO2 reduction reaction (CO2RR) selectivity on rotating ring disk electrodes (RRDE) are a rapid and sensitive method for quantifying an electrocatalyst’s selectivity, i.e. faradaic efficiency (FE). This method has been applied to polycrystalline Au electrocatalysts where a Au disk electrode catalyzes both the CO2RR and hydrogen evolution reaction while the concentric Au ring electrode selectively senses CO by oxidizing CO back to CO2. Such measurements enabled fundamental mechanistic studies but suffer from poor inter-laboratory reproducibility. This work identifies causes of variability in RRDE selectivity measurements by comparing protocols with different electrochemical methods, reagent purities, and glassware cleaning procedures. We observed FECO decrease by 56% during 5 min chronoamperometry measurements, a phenomenon that is not readily apparent in voltammetric scans due to their dynamic nature. Electroplating of electrolyte impurities onto the disk and ring surfaces were identified as a major contributor to Au deactivation. Additionally, the oxygen reduction reaction may lead to higher disk currents in inadequately purged electrolytes, causing an apparent underestimation of FECO at low overpotentials. Lastly, we propose operational bounds for CO2RR selectivity measurements on Au using the RRDE method and provide suggestions on steps for improving the accuracy of this technique.


  • Open Access

    Porous Transport Layers for Anion Exchange Membrane Water Electrolysis: The Impact of Morphology and Composition

    by Melissa E. Kreider, Ambar R. Maldonado Santos, Arielle L. Clauser, Matthew E. Sweers, Leiming Hu, Emily K. Volk, Ai-Lin Chan, Joshua D. Sugar, Shaun M. Alia

    Anion exchange membrane water electrolysis (AEMWE) is an emerging technology for the low-cost production of hydrogen. However, the efficiency and durability of AEMWE devices is currently insufficient to compete with other low-temperature electrolysis technologies. The porous transport layer (PTL) is a critical cell component that remains relatively unoptimized for AEMWE. In this study, we demonstrate that device performance is significantly affected by the morphology and composition of the PTL. For Ni fiber-based PTLs with a ∼2 μm Co3O4 oxygen evolution reaction catalyst layer, decreasing the pore size and porosity resulted in a 20% increase in current density at 2 V in 1 M KOH supporting electrolyte. Alloy PTLs with even lower porosity had a higher performance; in particular, the stainless steel PTL gave an 80% increase in current density relative to Ni. Without Co3O4, the alloy PTLs still demonstrated high activity, indicating that the PTL material was catalytically active. However, characterization of the electrode and electrolyte after testing indicated that the alloy PTLs also underwent restructuring and corrosion processes that may limit long-term stability. This study demonstrates that the design of PTLs with improved morphology and composition is an important area of focus to achieve AEMWE performance targets.


  • Open Access

    Role of the Ionomer in Supporting Electrolyte-Fed Anion Exchange Membrane Water Electrolyzers

    by Emily K. Volk, Arielle L. Clauser, Melissa E. Kreider, Diego D. Soetrisno, Sunilkumar Khandavalli, Joshua D. Sugar, Stephanie Kwon, Shaun M. Alia

    While anion exchange membrane water electrolyzers (AEMWEs) have achieved significant performance advances in recent decades, overpotentials remain high relative to their proton exchange membrane water electrolyzer (PEMWE) counterparts, requiring AEMWE-specific catalyst layer design strategies to further advance this technology. In this work, the role of the ionomer in catalyst layer structure and quality, catalyst layer stability, and ion conduction for supporting electrolyte-fed AEMWEs is assessed for catalyst layers composed of NiFe2O4 and PiperION TP85 from Versogen at variable ionomer contents (0-30 wt %) for tests up to 200 h. The results reveal that, for supporting electrolyte-fed AEM devices, the ionomer is not required for ion conduction through the catalyst layer. Instead, the ionomer is found to play a critical role in catalyst layer structure and stability, where intermediate ionomer contents lead to the lowest overpotentials, highest effective surface areas, and lowest catalyst layer resistances. Catalyst layer stability is found to be a function of both catalyst adhesion and ionomer loss. These results show that an ionomer may be selected which is not of the same chemistry as the anion exchange membrane, mitigating ionomer stability concerns throughout the catalyst layer and offering a pathway towards highly active and stable AEMWEs.