Emily K. Volk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Emily K. Volk has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Shaun M. Alia
National Laboratory of the Rockies
8 shared publications - Melissa E. Kreider
Chemistry and Nanoscience Center, National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, CO 80401, United States of America
7 shared publications - Stephanie Kwon
Department of Chemical and Biological Engineering, Colorado School of Mines, Golden, Colorado 80401, United States
5 shared publications Joshua D. Sugar
Sandia National Laboratories
3 shared publications- Mai-Anh Ha
Computational Science Center, National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401, United States
3 shared publications Ambar R. Maldonado Santos
Chemistry and Nanoscience Center
2 shared publications
Latest Publications
- Open Access
- 2 March 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 015026
The ionomer as an oxygen evolution reaction promoter: piperidinium’s impact on mechanistic pathways on NiO, IrO 2 , and Fe–NiO
The commercial viability of anion exchange membrane (AEM) electrolysis requires optimization of various stack components, with specific catalyst-ionomer combinations often yielding higher current densities, lowered Tafel slopes, and improved mass activity. In this joint theoretical-experimental study, theoretical calculations detail the impact of Versogen’s piperidinium functional group on the complex, kinetically limiting oxygen evolution reaction, finding that the functional group can act as a promoter of specific steps (O*/O 2 * formation; H 2 O/O 2 desorption with reaction enthalpies ranging between 0.2–0.6 eV at higher coverages of O x H y intermediates) on NiO and NiFeO x catalysts. In particular, Fe sites on the NiFeO x catalyst facilitate concerted mechanisms of O*/O 2 * formation and H 2 O desorption with a low enthalpy of 0.5 eV; O 2 desorption alone requires only 0.3 eV. In contrast, Versogen-IrO 2 results in stronger Ir–O bonds, where the enthalpies for bond breaking (Ir–OH 2 and Ir–O 2 ) are considerably higher (1.4 eV and 1.6 eV, respectively). Rotating disk electrode studies utilized commercially available NiO and IrO 2 and synthesized 7.5 wt % Fe in NiFeO x catalysts in combination with Versogen, a common AEM ionomer, and Nafion, an alternative binder. Electrochemical testing validated the impact of these mechanistic changes on ionomer-catalyst combinations, finding that Versogen particularly activates NiO and NiFeO x compared to IrO 2 . Following a 13.5 h hold at 1.8 V, mass activities and Tafel slopes improved to 34 ± 13 A g −1 and 79 ± 2 mV dec −1 (NiO) and 82 ± 4.9 A g −1 and 72 ± 2 mV dec −1 (NiFeO x ). In contrast, Versogen-IrO 2 only reached 17 ± 2.9 A g −1 and 81 ± 3 mV dec −1 . Optimization of the ionomer-catalyst can yield significant increases in performance from initial activity and after an electrochemical conditioning procedure: this enhancement to the mass activity resulted in a 200.9 ± 106.1% improvement for Versogen-NiFeO x and 1284.2 ± 260.5% for Versogen-NiO. In contrast, Nafion-NiFeO x and -NiO offered moderate improvements of 39.1 ± 30.5% and 120.9 ± 59.1%, respectively.
- 2 March 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 015026
Open AccessThe ionomer as an oxygen evolution reaction promoter: piperidinium’s impact on mechanistic pathways on NiO, IrO 2 , and Fe–NiO
The commercial viability of anion exchange membrane (AEM) electrolysis requires optimization of various stack components, with specific catalyst-ionomer combinations often yielding higher current densities, lowered Tafel slopes, and improved mass activity. In this joint theoretical-experimental study, theoretical calculations detail the impact of Versogen’s piperidinium functional group on the complex, kinetically limiting oxygen evolution reaction, finding that the functional group can act as a promoter of specific steps (O*/O 2 * formation; H 2 O/O 2 desorption with reaction enthalpies ranging between 0.2–0.6 eV at higher coverages of O x H y intermediates) on NiO and NiFeO x catalysts. In particular, Fe sites on the NiFeO x catalyst facilitate concerted mechanisms of O*/O 2 * formation and H 2 O desorption with a low enthalpy of 0.5 eV; O 2 desorption alone requires only 0.3 eV. In contrast, Versogen-IrO 2 results in stronger Ir–O bonds, where the enthalpies for bond breaking (Ir–OH 2 and Ir–O 2 ) are considerably higher (1.4 eV and 1.6 eV, respectively). Rotating disk electrode studies utilized commercially available NiO and IrO 2 and synthesized 7.5 wt % Fe in NiFeO x catalysts in combination with Versogen, a common AEM ionomer, and Nafion, an alternative binder. Electrochemical testing validated the impact of these mechanistic changes on ionomer-catalyst combinations, finding that Versogen particularly activates NiO and NiFeO x compared to IrO 2 . Following a 13.5 h hold at 1.8 V, mass activities and Tafel slopes improved to 34 ± 13 A g −1 and 79 ± 2 mV dec −1 (NiO) and 82 ± 4.9 A g −1 and 72 ± 2 mV dec −1 (NiFeO x ). In contrast, Versogen-IrO 2 only reached 17 ± 2.9 A g −1 and 81 ± 3 mV dec −1 . Optimization of the ionomer-catalyst can yield significant increases in performance from initial activity and after an electrochemical conditioning procedure: this enhancement to the mass activity resulted in a 200.9 ± 106.1% improvement for Versogen-NiFeO x and 1284.2 ± 260.5% for Versogen-NiO. In contrast, Nafion-NiFeO x and -NiO offered moderate improvements of 39.1 ± 30.5% and 120.9 ± 59.1%, respectively.
- Open Access
- 28 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8081-8098
Designing the Platinum Catalyst Layer for Improved Performance and Durability in Anion Exchange Membrane Water Electrolysis
To lower the cost of hydrogen produced by anion exchange membrane water electrolysis (AEMWE), it is critical to reduce the use of platinum group metal (PGM) catalysts within the device. While iridium has been successfully replaced with PGM-free catalysts at the anode, platinum-based (Pt) cathode catalysts are still required to meet the activity and durability targets. This study investigates the impact of commercial Pt/C catalyst loading, ionomer type and content, and electrode fabrication method on the cathode catalyst layer properties and AEMWE performance with the aim of determining the feasibility of reduced Pt loadings. While increased Pt loading is found to improve beginning-of-life performance, the effects are minimal above 0.6 mg/cm2. Ink characterization shows that ionomer type and content affect the ink stability, particle size, and percent of unbound ionomer, which further impact the homogeneity of the sprayed catalyst layers. The 5% PiperION cathode exhibited the highest performance, which may be attributed to a balance between the small particle size and the low proportion of unbound ionomer, minimizing kinetic and transport losses. Theoretical calculations show that the ionomers interact differently with the Pt surface, causing different surface charges and water adsorption strength and activating different mechanisms for hydrogen evolution. Pt-PiperION lowered the enthalpy of water-splitting by 0.1 eV compared to Pt alone and allowed for equal site access between adsorbed H* and OH* (both adsorbed at circa -2.2 eV). Although catalyst-coated membrane (CCM) fabrication techniques are desirable for scale-up, no performance enhancement is observed compared with the catalyst-coated substrate approach. Durability, as measured by degradation rates, Pt loss, and catalyst layer restructuring, was found to improve with increased Pt loadings, higher ionomer content, and CCM architectures. These findings provide important insight into the significant role of the cathode in AEMWE and strategies for maintaining the performance with low Pt loading or PGM-free catalysts.
- 28 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8081-8098
Open AccessDesigning the Platinum Catalyst Layer for Improved Performance and Durability in Anion Exchange Membrane Water Electrolysis
To lower the cost of hydrogen produced by anion exchange membrane water electrolysis (AEMWE), it is critical to reduce the use of platinum group metal (PGM) catalysts within the device. While iridium has been successfully replaced with PGM-free catalysts at the anode, platinum-based (Pt) cathode catalysts are still required to meet the activity and durability targets. This study investigates the impact of commercial Pt/C catalyst loading, ionomer type and content, and electrode fabrication method on the cathode catalyst layer properties and AEMWE performance with the aim of determining the feasibility of reduced Pt loadings. While increased Pt loading is found to improve beginning-of-life performance, the effects are minimal above 0.6 mg/cm2. Ink characterization shows that ionomer type and content affect the ink stability, particle size, and percent of unbound ionomer, which further impact the homogeneity of the sprayed catalyst layers. The 5% PiperION cathode exhibited the highest performance, which may be attributed to a balance between the small particle size and the low proportion of unbound ionomer, minimizing kinetic and transport losses. Theoretical calculations show that the ionomers interact differently with the Pt surface, causing different surface charges and water adsorption strength and activating different mechanisms for hydrogen evolution. Pt-PiperION lowered the enthalpy of water-splitting by 0.1 eV compared to Pt alone and allowed for equal site access between adsorbed H* and OH* (both adsorbed at circa -2.2 eV). Although catalyst-coated membrane (CCM) fabrication techniques are desirable for scale-up, no performance enhancement is observed compared with the catalyst-coated substrate approach. Durability, as measured by degradation rates, Pt loss, and catalyst layer restructuring, was found to improve with increased Pt loadings, higher ionomer content, and CCM architectures. These findings provide important insight into the significant role of the cathode in AEMWE and strategies for maintaining the performance with low Pt loading or PGM-free catalysts.
- Open Access
- 29 December 2025
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 5 (2) , 139-145
Voltage breakdown analyses in anion exchange membrane water electrolysis – the contributions of catalyst layer resistance on overall overpotentials
This perspective discusses the origins of catalyst layer resistance in anion exchange membrane water electrolyzers and outlines a strategy to deconvolute cell overpotentials.
- 29 December 2025
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 5 (2) , 139-145
Open AccessVoltage breakdown analyses in anion exchange membrane water electrolysis – the contributions of catalyst layer resistance on overall overpotentials
This perspective discusses the origins of catalyst layer resistance in anion exchange membrane water electrolyzers and outlines a strategy to deconvolute cell overpotentials.
- Open Access
- 18 June 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (13) , 11475-11486
Electrochemical Activation of Ni–Fe Oxides for the Oxygen Evolution Reaction in Alkaline Media
The oxygen evolution reaction (OER) is essential to many key electrochemical devices, including H2O electrolyzers, CO2 electrolyzers, and metal–air batteries. NiFe oxides have been historically identified as active for the OER, though they have been less studied in their more commercially relevant bulk oxide forms, such as NiFe2O4. Past works have demonstrated that the initial starting phase of Ni(Fe) precatalysts can influence their activation to the Ni(Fe)OOH active phase, including the rate and degree of conversion, pointing to the necessity of understanding activation protocols and in situ characteristics of catalyst materials at the device level. In this work, we investigate the characteristics of commercially relevant NiFe bulk oxides (NiFe2O4 and a physical mixture of NiO and γ-Fe2O3) during multiple activation procedures. Our results demonstrate that significant performance enhancement is observed for these bulk oxides regardless of the Fe incorporation in the initial form (i.e., atomically or macroscopically integrated), leading to significant performance enhancement (up to 30×) over time on stream. We hypothesize that this activation is due to the formation of NiFeOOH active sites on the surface, supported by in situ cyclic voltammetry and Raman spectroscopy results. We further show that not only the starting material but also the method of activation influences the number of Ni(Fe)OOH active sites formed and suggest that these sites can be quantified from the Ni2+ to Ni3+ redox transition using cyclic voltammetry. Broadly, this work demonstrates the necessity of in situ characterization of catalyst materials for cell-level design and testing.
- 18 June 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (13) , 11475-11486
Open AccessElectrochemical Activation of Ni–Fe Oxides for the Oxygen Evolution Reaction in Alkaline Media
The oxygen evolution reaction (OER) is essential to many key electrochemical devices, including H2O electrolyzers, CO2 electrolyzers, and metal–air batteries. NiFe oxides have been historically identified as active for the OER, though they have been less studied in their more commercially relevant bulk oxide forms, such as NiFe2O4. Past works have demonstrated that the initial starting phase of Ni(Fe) precatalysts can influence their activation to the Ni(Fe)OOH active phase, including the rate and degree of conversion, pointing to the necessity of understanding activation protocols and in situ characteristics of catalyst materials at the device level. In this work, we investigate the characteristics of commercially relevant NiFe bulk oxides (NiFe2O4 and a physical mixture of NiO and γ-Fe2O3) during multiple activation procedures. Our results demonstrate that significant performance enhancement is observed for these bulk oxides regardless of the Fe incorporation in the initial form (i.e., atomically or macroscopically integrated), leading to significant performance enhancement (up to 30×) over time on stream. We hypothesize that this activation is due to the formation of NiFeOOH active sites on the surface, supported by in situ cyclic voltammetry and Raman spectroscopy results. We further show that not only the starting material but also the method of activation influences the number of Ni(Fe)OOH active sites formed and suggest that these sites can be quantified from the Ni2+ to Ni3+ redox transition using cyclic voltammetry. Broadly, this work demonstrates the necessity of in situ characterization of catalyst materials for cell-level design and testing.
- Open Access
- 29 April 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (8) , 1339-1351
Complex Degradation Mechanisms Accessible to Anion Exchange Membrane Ionomers on Model Catalysts, NiO and IrO2
For anion exchange membrane (AEM) electrolysis to be cost- and performance-competitive to proton exchange membrane (PEM) electrolysis, evaluating and improving the stability of the ionomer at the ionomer–catalyst interface will be key to this emerging technology. Theoretical calculations of molecular fragments of the ionomers detailed the complex degradation mechanisms accessible to four different classes of ionomers (Nafion, Sustainion, Versogen, and quaternary ammonium typesETFE, Gen 2, and Georgia Tech) on model catalysts of platinum group metal IrO2 and earth-abundant NiO. These mechanisms may occur during the making of the ionomer-catalyst ink or in the alkaline environment of AEM electrolysis or are energetically accessible at the electrochemical potentials of electrolysis. We identified diverse degradations such as (H)SO4 production, water formation, oxidation to an alcohol, and deprotonation, leading to ionomer instability and competing with the oxygen evolution reaction (OER). Theory predicted that the weakly bound, intact cations of Sustainion’s methyl imidazolium on NiO and Versogen’s piperidinium on NiO combinations to be particularly stable and active for OER; these findings were validated by half-cell rotating disk electrode tests, where following break-in, their performance increased by 7–8 times. IrO2 may be stable and maintain OER activity, but site access remains limited due to the strong binding and reactivity of the ionomer at the high potentials of electrolysis (at 1.4 V, Nafion’s SO3 splits into SO2 + O; at 0.6 V, double deprotonation of Versogen can occur; at 1.5 V, ring oxidation of Sustainion to an alcohol initiates).
- 29 April 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (8) , 1339-1351
Open AccessComplex Degradation Mechanisms Accessible to Anion Exchange Membrane Ionomers on Model Catalysts, NiO and IrO2
For anion exchange membrane (AEM) electrolysis to be cost- and performance-competitive to proton exchange membrane (PEM) electrolysis, evaluating and improving the stability of the ionomer at the ionomer–catalyst interface will be key to this emerging technology. Theoretical calculations of molecular fragments of the ionomers detailed the complex degradation mechanisms accessible to four different classes of ionomers (Nafion, Sustainion, Versogen, and quaternary ammonium typesETFE, Gen 2, and Georgia Tech) on model catalysts of platinum group metal IrO2 and earth-abundant NiO. These mechanisms may occur during the making of the ionomer-catalyst ink or in the alkaline environment of AEM electrolysis or are energetically accessible at the electrochemical potentials of electrolysis. We identified diverse degradations such as (H)SO4 production, water formation, oxidation to an alcohol, and deprotonation, leading to ionomer instability and competing with the oxygen evolution reaction (OER). Theory predicted that the weakly bound, intact cations of Sustainion’s methyl imidazolium on NiO and Versogen’s piperidinium on NiO combinations to be particularly stable and active for OER; these findings were validated by half-cell rotating disk electrode tests, where following break-in, their performance increased by 7–8 times. IrO2 may be stable and maintain OER activity, but site access remains limited due to the strong binding and reactivity of the ionomer at the high potentials of electrolysis (at 1.4 V, Nafion’s SO3 splits into SO2 + O; at 0.6 V, double deprotonation of Versogen can occur; at 1.5 V, ring oxidation of Sustainion to an alcohol initiates).
- Open Access
- 7 February 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (6) , 897-909
Porous Transport Layers for Anion Exchange Membrane Water Electrolysis: The Impact of Morphology and Composition
Anion exchange membrane water electrolysis (AEMWE) is an emerging technology for the low-cost production of hydrogen. However, the efficiency and durability of AEMWE devices is currently insufficient to compete with other low-temperature electrolysis technologies. The porous transport layer (PTL) is a critical cell component that remains relatively unoptimized for AEMWE. In this study, we demonstrate that device performance is significantly affected by the morphology and composition of the PTL. For Ni fiber-based PTLs with a ∼2 μm Co3O4 oxygen evolution reaction catalyst layer, decreasing the pore size and porosity resulted in a 20% increase in current density at 2 V in 1 M KOH supporting electrolyte. Alloy PTLs with even lower porosity had a higher performance; in particular, the stainless steel PTL gave an 80% increase in current density relative to Ni. Without Co3O4, the alloy PTLs still demonstrated high activity, indicating that the PTL material was catalytically active. However, characterization of the electrode and electrolyte after testing indicated that the alloy PTLs also underwent restructuring and corrosion processes that may limit long-term stability. This study demonstrates that the design of PTLs with improved morphology and composition is an important area of focus to achieve AEMWE performance targets.
- 7 February 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (6) , 897-909
Open AccessPorous Transport Layers for Anion Exchange Membrane Water Electrolysis: The Impact of Morphology and Composition
Anion exchange membrane water electrolysis (AEMWE) is an emerging technology for the low-cost production of hydrogen. However, the efficiency and durability of AEMWE devices is currently insufficient to compete with other low-temperature electrolysis technologies. The porous transport layer (PTL) is a critical cell component that remains relatively unoptimized for AEMWE. In this study, we demonstrate that device performance is significantly affected by the morphology and composition of the PTL. For Ni fiber-based PTLs with a ∼2 μm Co3O4 oxygen evolution reaction catalyst layer, decreasing the pore size and porosity resulted in a 20% increase in current density at 2 V in 1 M KOH supporting electrolyte. Alloy PTLs with even lower porosity had a higher performance; in particular, the stainless steel PTL gave an 80% increase in current density relative to Ni. Without Co3O4, the alloy PTLs still demonstrated high activity, indicating that the PTL material was catalytically active. However, characterization of the electrode and electrolyte after testing indicated that the alloy PTLs also underwent restructuring and corrosion processes that may limit long-term stability. This study demonstrates that the design of PTLs with improved morphology and composition is an important area of focus to achieve AEMWE performance targets.
- Open Access
- 6 November 2024
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (2) , 239-248
Role of the Ionomer in Supporting Electrolyte-Fed Anion Exchange Membrane Water Electrolyzers
While anion exchange membrane water electrolyzers (AEMWEs) have achieved significant performance advances in recent decades, overpotentials remain high relative to their proton exchange membrane water electrolyzer (PEMWE) counterparts, requiring AEMWE-specific catalyst layer design strategies to further advance this technology. In this work, the role of the ionomer in catalyst layer structure and quality, catalyst layer stability, and ion conduction for supporting electrolyte-fed AEMWEs is assessed for catalyst layers composed of NiFe2O4 and PiperION TP85 from Versogen at variable ionomer contents (0-30 wt %) for tests up to 200 h. The results reveal that, for supporting electrolyte-fed AEM devices, the ionomer is not required for ion conduction through the catalyst layer. Instead, the ionomer is found to play a critical role in catalyst layer structure and stability, where intermediate ionomer contents lead to the lowest overpotentials, highest effective surface areas, and lowest catalyst layer resistances. Catalyst layer stability is found to be a function of both catalyst adhesion and ionomer loss. These results show that an ionomer may be selected which is not of the same chemistry as the anion exchange membrane, mitigating ionomer stability concerns throughout the catalyst layer and offering a pathway towards highly active and stable AEMWEs.
- 6 November 2024
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (2) , 239-248
Open AccessRole of the Ionomer in Supporting Electrolyte-Fed Anion Exchange Membrane Water Electrolyzers
While anion exchange membrane water electrolyzers (AEMWEs) have achieved significant performance advances in recent decades, overpotentials remain high relative to their proton exchange membrane water electrolyzer (PEMWE) counterparts, requiring AEMWE-specific catalyst layer design strategies to further advance this technology. In this work, the role of the ionomer in catalyst layer structure and quality, catalyst layer stability, and ion conduction for supporting electrolyte-fed AEMWEs is assessed for catalyst layers composed of NiFe2O4 and PiperION TP85 from Versogen at variable ionomer contents (0-30 wt %) for tests up to 200 h. The results reveal that, for supporting electrolyte-fed AEM devices, the ionomer is not required for ion conduction through the catalyst layer. Instead, the ionomer is found to play a critical role in catalyst layer structure and stability, where intermediate ionomer contents lead to the lowest overpotentials, highest effective surface areas, and lowest catalyst layer resistances. Catalyst layer stability is found to be a function of both catalyst adhesion and ionomer loss. These results show that an ionomer may be selected which is not of the same chemistry as the anion exchange membrane, mitigating ionomer stability concerns throughout the catalyst layer and offering a pathway towards highly active and stable AEMWEs.
- Top Cited PapersOpen Access
- 7 November 2023
- Published by Royal Society of Chemistry (RSC) in EES Catalysis
- Vol. 2 (1) , 109-137
Recent progress in understanding the catalyst layer in anion exchange membrane electrolyzers – durability, utilization, and integration
This review discusses recent insights in catalyst layer design strategies for anion exchange membrane water electrolyzers, including electrode design, catalyst/ionomer integration, operational variables, in situ diagnostics, and cell durability.
- 7 November 2023
- Published by Royal Society of Chemistry (RSC) in EES Catalysis
- Vol. 2 (1) , 109-137
Top Cited PapersOpen AccessRecent progress in understanding the catalyst layer in anion exchange membrane electrolyzers – durability, utilization, and integration
This review discusses recent insights in catalyst layer design strategies for anion exchange membrane water electrolyzers, including electrode design, catalyst/ionomer integration, operational variables, in situ diagnostics, and cell durability.
- Open Access
- 16 May 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (6) , 064506
Catalytic Activity and Stability of Non-Platinum Group Metal Oxides for the Oxygen Evolution Reaction in Anion Exchange Membrane Electrolyzers
The activities and stabilities of non-platinum group metals (PGMs) in the forms of monometallic (Mn2O3, Fe2O3, Co3O4, NiO) and bimetallic (NiFe2O4, CoNiO2) oxides were assessed for the oxygen evolution reaction (OER) in alkaline media and compared with IrO2. Both half-cell, rotating disc electrode (RDE) apparatus and single-cell, membrane electrode assemblies (MEA) were used to study kinetic and device-level performance in parallel and to provide insights into the use of these materials in anion exchange membrane (AEM) electrolyzers. Normalization of RDE results by geometric and physical surface areas, double layer capacitance, and metal content probed differences in physically vs electrochemically accessible surface areas and ensured reported trends were independent of the normalization method. The results showed that: (i) Ni- and Co- containing materials met or exceeded IrO2 performance in both RDE and MEA testing, (ii) Co3O4 deactivated over time-on-stream (1.8 V for 13.5 h) due to oxide and, relatedly, particle growth, (iii) NiFe2O4 increased in activity over time-on-stream due to dissolution of Fe and an increased Ni/Fe ratio, and (iv) reduction of catalyst layer resistance is an avenue to further increase device-level performance. These results demonstrated the clear viability for non-PGMs to be used as anode catalysts in AEM devices.
- 16 May 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (6) , 064506
Open AccessCatalytic Activity and Stability of Non-Platinum Group Metal Oxides for the Oxygen Evolution Reaction in Anion Exchange Membrane Electrolyzers
The activities and stabilities of non-platinum group metals (PGMs) in the forms of monometallic (Mn2O3, Fe2O3, Co3O4, NiO) and bimetallic (NiFe2O4, CoNiO2) oxides were assessed for the oxygen evolution reaction (OER) in alkaline media and compared with IrO2. Both half-cell, rotating disc electrode (RDE) apparatus and single-cell, membrane electrode assemblies (MEA) were used to study kinetic and device-level performance in parallel and to provide insights into the use of these materials in anion exchange membrane (AEM) electrolyzers. Normalization of RDE results by geometric and physical surface areas, double layer capacitance, and metal content probed differences in physically vs electrochemically accessible surface areas and ensured reported trends were independent of the normalization method. The results showed that: (i) Ni- and Co- containing materials met or exceeded IrO2 performance in both RDE and MEA testing, (ii) Co3O4 deactivated over time-on-stream (1.8 V for 13.5 h) due to oxide and, relatedly, particle growth, (iii) NiFe2O4 increased in activity over time-on-stream due to dissolution of Fe and an increased Ni/Fe ratio, and (iv) reduction of catalyst layer resistance is an avenue to further increase device-level performance. These results demonstrated the clear viability for non-PGMs to be used as anode catalysts in AEM devices.