Emily Kathryn McGuinness
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Emily Kathryn McGuinness has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Mark. D. Losego
School of Materials Science and Engineering, Georgia Institute of Technology 1 , 771 Ferst Drive NW, Atlanta, Georgia 30332
13 shared publications - Ryan P. Lively
School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive, Atlanta, Georgia 30332, United States
4 shared publications Benjamin C. Jean
School of Materials Science and Engineering, Georgia Institute of Technology, 771 Ferst Drive NW, Atlanta, Georgia 30332, United States
2 shared publications- Fengyi Zhang
School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
2 shared publications Haley V. Manno
School of Materials Science and Engineering, Georgia Institute of Technology , 771 Ferst Drive, Atlanta, Georgia 30332
2 shared publicationsJamie P. Wooding
School of Materials Science and Engineering, Georgia Institute of Technology, North Avenue NW, Atlanta, Georgia30332, United States
2 shared publications
Latest Publications
- 20 November 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (11)
Circular dichroism of distorted double gyroid thin film metamaterials
- 20 November 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (11)
Circular dichroism of distorted double gyroid thin film metamaterials
- Open Access
- 24 April 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (3)
Limiting reagent conditions to control inorganic loading in AlOx–PET hybrid fabrics created through vapor-phase infiltration
In this work, the vapor-phase infiltration (VPI) of polyethylene terephthalate (PET) fabrics with trimethylaluminum (TMA) and coreaction with water vapor is explored as a function of limiting TMA reagent conditions versus excess TMA reagent conditions at two infiltration temperatures. TMA is found to sorb rapidly into PET fibers, with a significant pressure drop occurring within seconds of TMA exposure. When large quantities of polymer are placed within the chamber, minimal residual precursor remains at the end of the pressure drop. This rapid and complete sorption facilitates the control of inorganic loading by purposely delivering a limited quantity of the TMA reagent. The inorganic loading for this system scales linearly with a Precursor:C=O molar ratio of up to 0.35 at 140 °C and 0.5 at 80 °C. After this point, inorganic loading is constant irrespective of the amount of additional TMA reagent supplied. The SEM analysis of pyrolyzed hybrids indicates that this is likely due to the formation of an impermeable layer to subsequent infiltration as the core of the fibers remains uninfiltrated. The Precursor:C=O molar ratio in the subsaturation regime is found to tune the hybrid fabric morphology and material properties such as the optical properties of the fabric. Overall, this work demonstrates how a reagent-limited processing route can control the inorganic loading in VPI synthesized hybrid materials in a simpler manner than trying to control kinetics-driven methods.
- 24 April 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (3)
Open AccessLimiting reagent conditions to control inorganic loading in AlOx–PET hybrid fabrics created through vapor-phase infiltration
In this work, the vapor-phase infiltration (VPI) of polyethylene terephthalate (PET) fabrics with trimethylaluminum (TMA) and coreaction with water vapor is explored as a function of limiting TMA reagent conditions versus excess TMA reagent conditions at two infiltration temperatures. TMA is found to sorb rapidly into PET fibers, with a significant pressure drop occurring within seconds of TMA exposure. When large quantities of polymer are placed within the chamber, minimal residual precursor remains at the end of the pressure drop. This rapid and complete sorption facilitates the control of inorganic loading by purposely delivering a limited quantity of the TMA reagent. The inorganic loading for this system scales linearly with a Precursor:C=O molar ratio of up to 0.35 at 140 °C and 0.5 at 80 °C. After this point, inorganic loading is constant irrespective of the amount of additional TMA reagent supplied. The SEM analysis of pyrolyzed hybrids indicates that this is likely due to the formation of an impermeable layer to subsequent infiltration as the core of the fibers remains uninfiltrated. The Precursor:C=O molar ratio in the subsaturation regime is found to tune the hybrid fabric morphology and material properties such as the optical properties of the fabric. Overall, this work demonstrates how a reagent-limited processing route can control the inorganic loading in VPI synthesized hybrid materials in a simpler manner than trying to control kinetics-driven methods.
- 3 January 2023
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 8 (1) , 844-852
Vapor Phase Infiltration Improves Thermal Stability of Organic Layers in Perovskite Solar Cells
- 3 January 2023
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 8 (1) , 844-852
Vapor Phase Infiltration Improves Thermal Stability of Organic Layers in Perovskite Solar Cells
- Open Access
- 23 August 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 4 (19) , 4102-4113
Toposelective vapor deposition of hybrid and inorganic materials inside nanocavities by polymeric templating and vapor phase infiltration
Selective deposition of hybrid and inorganic materials inside nanostructures could enable major nanotechnological advances. However, inserting ready-made composites inside nanocavities may be difficult, and therefore, stepwise approaches are needed. In this paper, a poly(ethyl acrylate) template is grown selectively inside cavities via condensation-controlled toposelective vapor deposition, and the polymer is then hybridized by alumina, titania, or zinc oxide. The hybridization is carried out by infiltrating the polymer with a vapor-phase metalorganic precursor and water vapor either via a short-pulse (atomic layer deposition, ALD) or a long-pulse (vapor phase infiltration, VPI) sequence. When the polymer-MOx hybrid material is calcined at 450 °C in air, an inorganic phase is left as the residue. Various suspected confinement effects are discussed. The infiltration of inorganic materials is reduced in deeper layers of the cavity-grown polymer and is dependent on the cavity geometry. The structure of the inorganic deposition after calcination varies from scattered particles and their aggregates to cavity-capping films or cavity-filling low-density porous deposition, and the inorganic deposition is often anisotropically cracked. A large part of the infiltration is achieved already during the short-pulse experiments with a commercial ALD reactor. Furthermore, the infiltrated polymer is more resistant to dissolution in acetone whereas the inorganic component can still be heavily affected by phosphoric acid.
- 23 August 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 4 (19) , 4102-4113
Open AccessToposelective vapor deposition of hybrid and inorganic materials inside nanocavities by polymeric templating and vapor phase infiltration
Selective deposition of hybrid and inorganic materials inside nanostructures could enable major nanotechnological advances. However, inserting ready-made composites inside nanocavities may be difficult, and therefore, stepwise approaches are needed. In this paper, a poly(ethyl acrylate) template is grown selectively inside cavities via condensation-controlled toposelective vapor deposition, and the polymer is then hybridized by alumina, titania, or zinc oxide. The hybridization is carried out by infiltrating the polymer with a vapor-phase metalorganic precursor and water vapor either via a short-pulse (atomic layer deposition, ALD) or a long-pulse (vapor phase infiltration, VPI) sequence. When the polymer-MOx hybrid material is calcined at 450 °C in air, an inorganic phase is left as the residue. Various suspected confinement effects are discussed. The infiltration of inorganic materials is reduced in deeper layers of the cavity-grown polymer and is dependent on the cavity geometry. The structure of the inorganic deposition after calcination varies from scattered particles and their aggregates to cavity-capping films or cavity-filling low-density porous deposition, and the inorganic deposition is often anisotropically cracked. A large part of the infiltration is achieved already during the short-pulse experiments with a commercial ALD reactor. Furthermore, the infiltrated polymer is more resistant to dissolution in acetone whereas the inorganic component can still be heavily affected by phosphoric acid.
- 3 August 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 126 (31) , 5920-5930
Vapor-Phase Infiltration of Polymer of Intrinsic Microporosity 1 (PIM-1) with Trimethylaluminum (TMA) and Water: A Combined Computational and Experimental Study
Vapor-phase infiltration, a postpolymerization modification process, has demonstrated the ability to create organic-inorganic hybrid membranes with excellent stability in organic solvents while maintaining critical membrane properties of high permeability and selectivity. However, the chemical reaction pathways that occur during VPI and their implications on the hybrid membrane stability are poorly understood. This paper combines in situ quartz crystal microbalance gravimetry (QCM) and ex situ chemical characterization with first-principles simulations at the atomic scale to study each processing step in the infiltration of polymer of intrinsic microporosity 1 (PIM-1) with trimethylaluminum (TMA) and its co-reaction with water vapor. Building upon results from in situ QCM experiments and SEM/EDX, which find TMA remains within PIM-1 even under long desorption times, density functional theory (DFT) simulations identify that an energetically stable coordination forms between the metal-organic precursor and PIM-1's nitrile functional group during the precursor exposure step of VPI. In the subsequent water vapor exposure step, the system undergoes a series of exothermic reactions to form the final hybrid membrane. DFT simulations indicate that these reaction pathways result in aluminum oxyhydroxide species consistent with ex situ XPS and FTIR characterization. Both NMR and DFT simulations suggest that the final aluminum structure is primarily 6-fold coordinated and that the aluminum is at least dimerized, if not further "polymerized". According to the simulations, coordination of the aluminum with at least one nitrile group from the PIM-1 appears to weaken significantly as the final inorganic structure emerges but remains present to enable the formation of the 6-fold coordination species. Water molecules are proposed to complete the coordination complex without further increasing the aluminum's oxidation state. This study provides new insights into the infiltration process and the chemical structure of the final hybrid membrane including support for the possible mechanism of solvent stability.
- 3 August 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 126 (31) , 5920-5930
Vapor-Phase Infiltration of Polymer of Intrinsic Microporosity 1 (PIM-1) with Trimethylaluminum (TMA) and Water: A Combined Computational and Experimental Study
Vapor-phase infiltration, a postpolymerization modification process, has demonstrated the ability to create organic-inorganic hybrid membranes with excellent stability in organic solvents while maintaining critical membrane properties of high permeability and selectivity. However, the chemical reaction pathways that occur during VPI and their implications on the hybrid membrane stability are poorly understood. This paper combines in situ quartz crystal microbalance gravimetry (QCM) and ex situ chemical characterization with first-principles simulations at the atomic scale to study each processing step in the infiltration of polymer of intrinsic microporosity 1 (PIM-1) with trimethylaluminum (TMA) and its co-reaction with water vapor. Building upon results from in situ QCM experiments and SEM/EDX, which find TMA remains within PIM-1 even under long desorption times, density functional theory (DFT) simulations identify that an energetically stable coordination forms between the metal-organic precursor and PIM-1's nitrile functional group during the precursor exposure step of VPI. In the subsequent water vapor exposure step, the system undergoes a series of exothermic reactions to form the final hybrid membrane. DFT simulations indicate that these reaction pathways result in aluminum oxyhydroxide species consistent with ex situ XPS and FTIR characterization. Both NMR and DFT simulations suggest that the final aluminum structure is primarily 6-fold coordinated and that the aluminum is at least dimerized, if not further "polymerized". According to the simulations, coordination of the aluminum with at least one nitrile group from the PIM-1 appears to weaken significantly as the final inorganic structure emerges but remains present to enable the formation of the 6-fold coordination species. Water molecules are proposed to complete the coordination complex without further increasing the aluminum's oxidation state. This study provides new insights into the infiltration process and the chemical structure of the final hybrid membrane including support for the possible mechanism of solvent stability.
- 5 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (5) , 3304-3314
Wash Fastness of Hybrid AlOx-PET Fabrics Created via Vapor-Phase Infiltration
- 5 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (5) , 3304-3314
Wash Fastness of Hybrid AlOx-PET Fabrics Created via Vapor-Phase Infiltration
- 1 December 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (49) , 14509-14519
Re-examination of the Aqueous Stability of Atomic Layer Deposited (ALD) Amorphous Alumina (Al2O3) Thin Films and the Use of a Postdeposition Air Plasma Anneal to Enhance Stability
Amorphous aluminum oxide (alumina) thin films are of interest as inert chemical barriers for various applications. However, the existing literature on the aqueous stability of atomic layer deposited (ALD) amorphous alumina thin films remains incomplete and, in some cases, inconsistent. Because these films have a metastable amorphous structure─which is likely partially hydrated in the as-deposited state─hydration and degradation behavior likely deviate from what is expected for the equilibrium, crystalline Al2O3 phase. Deposition conditions and the aqueous solution composition (ion content) appear to influence the reactivity and stability of amorphous ALD alumina films, but a full understanding of why these alumina films hydrate, solvate, and/or dissolve in near-neutral pH = 7 conditions, for which crystalline Al2O3 is expected to be stable, remains unsolved. In this work, we conduct an extensive X-ray photoelectron spectroscopy investigation of the surface chemistry as a function of water immersion time to reveal the formation of oxyhydroxide (AlOOH), hydroxide (Al(OH)3), and possible carbonate species. We further show that brief postdeposition exposures of these ALD alumina films to an air plasma anneal can significantly enhance the film’s stability in near-neutral pH aqueous conditions. The simplicity and effectiveness of this plasma treatment may provide a new alternative to thermal annealing and capping treatments typically used to promote aqueous stability of low-temperature ALD metal oxide barrier layers.
- 1 December 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (49) , 14509-14519
Re-examination of the Aqueous Stability of Atomic Layer Deposited (ALD) Amorphous Alumina (Al2O3) Thin Films and the Use of a Postdeposition Air Plasma Anneal to Enhance Stability
Amorphous aluminum oxide (alumina) thin films are of interest as inert chemical barriers for various applications. However, the existing literature on the aqueous stability of atomic layer deposited (ALD) amorphous alumina thin films remains incomplete and, in some cases, inconsistent. Because these films have a metastable amorphous structure─which is likely partially hydrated in the as-deposited state─hydration and degradation behavior likely deviate from what is expected for the equilibrium, crystalline Al2O3 phase. Deposition conditions and the aqueous solution composition (ion content) appear to influence the reactivity and stability of amorphous ALD alumina films, but a full understanding of why these alumina films hydrate, solvate, and/or dissolve in near-neutral pH = 7 conditions, for which crystalline Al2O3 is expected to be stable, remains unsolved. In this work, we conduct an extensive X-ray photoelectron spectroscopy investigation of the surface chemistry as a function of water immersion time to reveal the formation of oxyhydroxide (AlOOH), hydroxide (Al(OH)3), and possible carbonate species. We further show that brief postdeposition exposures of these ALD alumina films to an air plasma anneal can significantly enhance the film’s stability in near-neutral pH aqueous conditions. The simplicity and effectiveness of this plasma treatment may provide a new alternative to thermal annealing and capping treatments typically used to promote aqueous stability of low-temperature ALD metal oxide barrier layers.
- 12 August 2021
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 3 (9) , 4460-4469
Vapor-Phase-Infiltrated AlOx/PIM-1 “Hybrid Scaffolds” as Solution-Processable Amine Supports for CO2 Adsorption
- 12 August 2021
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 3 (9) , 4460-4469
Vapor-Phase-Infiltrated AlOx/PIM-1 “Hybrid Scaffolds” as Solution-Processable Amine Supports for CO2 Adsorption
- 29 June 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (13) , 5210-5222
Reaction–Diffusion Transport Model to Predict Precursor Uptake and Spatial Distribution in Vapor-Phase Infiltration Processes
- 29 June 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (13) , 5210-5222
Reaction–Diffusion Transport Model to Predict Precursor Uptake and Spatial Distribution in Vapor-Phase Infiltration Processes