Pedro Grau
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Pedro Grau has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Anibal Ollero
GRVC Robotics Lab, Universidad de Sevilla
4 shared publications - Guillermo Heredia
GRVC Robotics Lab, Universidad de Sevilla, Sevilla, Spain
2 shared publications - Alejandro Suarez
GRVC Robotics Laboratory, Universidad de Sevilla, Seville, Spain
1 shared publication - Antonio E. Jimenez-Cano
LAAS-CNRS, Université de Toulouse, CNRS, Toulouse, France
1 shared publication - Augusto Gómez Eguíluz
GRVC Robotics Lab Sevilla, Universidad de Sevilla, Seville, Spain
1 shared publication Ernesto Sanchez-Laulhe
GRVC, University of Seville, Sevilla, Spain
1 shared publication
Latest Publications
- 23 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 3097-3104
Design of the High-Payload Flapping Wing Robot E-Flap
Autonomous lightweight flapping-wing robots show potential to become a safe and affordable solution for rapidly deploying robots around humans and in complex environments. The absence of propellers makes such vehicles more resistant to physical contact, permitting flight in cluttered environments, and collaborating with humans. Importantly, the provision of thousands of species of birds that have already mastered the challenging task of flapping flight is a rich source of solutions. However, small wing flapping technology is still in its beginnings, with limited levels of autonomy and physical interaction capability with the environment. One significant limitation to this is the low payload available. Here we show the Eagle-inspired Flapping-wing robot E-Flap, a 510 g novel design capable of a 100% of payload, exceeding the requirement of the computing and sensing package needed to fly with a high degree of autonomy. The concept is extensively characterized, both in a tracked indoor space and in outdoor conditions. We demonstrate flight path angle of up to 50 $^\circ$ and velocities from as low as 2 m/s to over 6 m/s. Overall, the robotic platform has been proven to be reliable, having performed over 100 flights. Through mechanical and electronics advances, the E-Flap is a robust vehicle prototype and paves the way towards flapping-wing robots becoming a practical fully autonomous flying solution. Video attachment: https://youtu.be/GpAa176TMf0
- 23 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 3097-3104
Design of the High-Payload Flapping Wing Robot E-Flap
Autonomous lightweight flapping-wing robots show potential to become a safe and affordable solution for rapidly deploying robots around humans and in complex environments. The absence of propellers makes such vehicles more resistant to physical contact, permitting flight in cluttered environments, and collaborating with humans. Importantly, the provision of thousands of species of birds that have already mastered the challenging task of flapping flight is a rich source of solutions. However, small wing flapping technology is still in its beginnings, with limited levels of autonomy and physical interaction capability with the environment. One significant limitation to this is the low payload available. Here we show the Eagle-inspired Flapping-wing robot E-Flap, a 510 g novel design capable of a 100% of payload, exceeding the requirement of the computing and sensing package needed to fly with a high degree of autonomy. The concept is extensively characterized, both in a tracked indoor space and in outdoor conditions. We demonstrate flight path angle of up to 50 $^\circ$ and velocities from as low as 2 m/s to over 6 m/s. Overall, the robotic platform has been proven to be reliable, having performed over 100 flights. Through mechanical and electronics advances, the E-Flap is a robust vehicle prototype and paves the way towards flapping-wing robots becoming a practical fully autonomous flying solution. Video attachment: https://youtu.be/GpAa176TMf0
- 2 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 1066-1073
The GRIFFIN Perception Dataset: Bridging the Gap Between Flapping-Wing Flight and Robotic Perception
The development of automatic perception systems and techniques for bio-inspired flapping-wing robots is severely hampered by the high technical complexity of these platforms and the installation of onboard sensors and electronics. Besides, flapping-wing robot perception suffers from high vibration levels and abrupt movements during flight, which cause motion blur and strong changes in lighting conditions. This letter presents a perception dataset for bird-scale flapping-wing robots as a tool to help alleviate the aforementioned problems. The presented data include measurements from onboard sensors widely used in aerial robotics and suitable to deal with the perception challenges of flapping-wing robots, such as an event camera, a conventional camera, and two Inertial Measurement Units (IMUs), as well as ground truth measurements from a laser tracker or a motion capture system. A total of 21 datasets of different types of flights were collected in three different scenarios (one indoor and two outdoor). To the best of the authors' knowledge this is the first dataset for flapping-wing robot perception.
- 2 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 1066-1073
The GRIFFIN Perception Dataset: Bridging the Gap Between Flapping-Wing Flight and Robotic Perception
The development of automatic perception systems and techniques for bio-inspired flapping-wing robots is severely hampered by the high technical complexity of these platforms and the installation of onboard sensors and electronics. Besides, flapping-wing robot perception suffers from high vibration levels and abrupt movements during flight, which cause motion blur and strong changes in lighting conditions. This letter presents a perception dataset for bird-scale flapping-wing robots as a tool to help alleviate the aforementioned problems. The presented data include measurements from onboard sensors widely used in aerial robotics and suitable to deal with the perception challenges of flapping-wing robots, such as an event camera, a conventional camera, and two Inertial Measurement Units (IMUs), as well as ground truth measurements from a laser tracker or a motion capture system. A total of 21 datasets of different types of flights were collected in three different scenarios (one indoor and two outdoor). To the best of the authors' knowledge this is the first dataset for flapping-wing robot perception.
- Open Access
- 12 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (14) , 4783
Winged Aerial Manipulation Robot with Dual Arm and Tail
This paper presents the design and development of a winged aerial robot with bimanual manipulation capabilities, motivated by the current limitations of aerial manipulators based on multirotor platforms in terms of safety and range/endurance. Since the combination of gliding and flapping wings is more energy efficient in forward flight, we propose a new morphology that exploits this feature and allows the realization of dexterous manipulation tasks once the aerial robot has landed or perched. The paper describes the design, development, and aerodynamic analysis of this winged aerial manipulation robot (WAMR), consisting of a small-scale dual arm used for manipulating and as a morphing wing. The arms, fuselage, and tail are covered by a nylon cloth that acts as a cap, similar to a kite. The three joints of the arms (shoulder yaw and pitch, elbow pitch) can be used to control the surface area and orientation and thus the aerodynamic wrenches induced over the cloth. The proposed concept design is extended to a flapping-wing aerial robot built with smart servo actuators and a similar frame structure, allowing the generation of different flapping patterns exploiting the embedded servo controller. Experimental and simulation results carried out with these two prototypes evaluate the manipulation capability and the possibility of gliding and flying.
- 12 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (14) , 4783
Open AccessWinged Aerial Manipulation Robot with Dual Arm and Tail
This paper presents the design and development of a winged aerial robot with bimanual manipulation capabilities, motivated by the current limitations of aerial manipulators based on multirotor platforms in terms of safety and range/endurance. Since the combination of gliding and flapping wings is more energy efficient in forward flight, we propose a new morphology that exploits this feature and allows the realization of dexterous manipulation tasks once the aerial robot has landed or perched. The paper describes the design, development, and aerodynamic analysis of this winged aerial manipulation robot (WAMR), consisting of a small-scale dual arm used for manipulating and as a morphing wing. The arms, fuselage, and tail are covered by a nylon cloth that acts as a cap, similar to a kite. The three joints of the arms (shoulder yaw and pitch, elbow pitch) can be used to control the surface area and orientation and thus the aerodynamic wrenches induced over the cloth. The proposed concept design is extended to a flapping-wing aerial robot built with smart servo actuators and a similar frame structure, allowing the generation of different flapping patterns exploiting the embedded servo controller. Experimental and simulation results carried out with these two prototypes evaluate the manipulation capability and the possibility of gliding and flying.
- Open Access
- 12 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (4) , 3561-3568
Contact-Based Bridge Inspection Multirotors: Design, Modeling, and Control Considering the Ceiling Effect
This letter presents the design, modeling, and control of a multirotor for inspection of bridges with full contact. The letter analyzes the aerodynamic ceiling effect when the aerial robot approaches the bridge surface from below, including its aerodynamic characterization using computational fluid dynamics. The proposed multirotor design takes the modeled aerodynamic effects into account, improving the performance of the aerial platform terms of the stability and position accuracy during the inspection. Nonlinear attitude and position controllers to manage the aerodynamic effects are derived and tested. Finally, outdoor experiments in a real bridge inspection task have been used to validate the system, as well as, the controller and the aerodynamic characterization. The experiments carried out also include a complete autonomous mission of the aerial platform during a structural assessment application.
- 12 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (4) , 3561-3568
Open AccessContact-Based Bridge Inspection Multirotors: Design, Modeling, and Control Considering the Ceiling Effect
This letter presents the design, modeling, and control of a multirotor for inspection of bridges with full contact. The letter analyzes the aerodynamic ceiling effect when the aerial robot approaches the bridge surface from below, including its aerodynamic characterization using computational fluid dynamics. The proposed multirotor design takes the modeled aerodynamic effects into account, improving the performance of the aerial platform terms of the stability and position accuracy during the inspection. Nonlinear attitude and position controllers to manage the aerodynamic effects are derived and tested. Finally, outdoor experiments in a real bridge inspection task have been used to validate the system, as well as, the controller and the aerodynamic characterization. The experiments carried out also include a complete autonomous mission of the aerial platform during a structural assessment application.