SMShin Mou

Shin Mou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shin Mou has a total of 153 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of aluminum composition on cavity formation in Al x Ga1− x N alloys under swift heavy ion irradiation

    by Mahjabin Mahfuz, Farshid Reza, Steven Frankowski, Maik Lang, Miguel L. Crespillo, Thaddeus J. Asel, Adam T. Neal, Alexander Chaney, Shin Mou, Sunil Kumar, et al.

    AlGaN/GaN high-electron-mobility transistors are promising candidates for next-generation semiconductor devices operating in radiation-rich environments. This study investigates irradiation-induced microstructural damage in AlxGa1−xN under swift heavy ion (SHI) irradiation as a function of alloy composition. AlxGa1−xN samples spanning the compositional range from x = 0 to 0.66 were irradiated with 946 MeV Au ions at fluences of 2 × 1011 and 3 × 1011 ions/cm2. Post-irradiation transmission electron microscopy (TEM) and atomistic simulations consistently reveal nanometer-scale cavity formation across all compositions, with cavity morphology exhibiting a strong compositional dependence. In GaN (x = 0), cavities adopt dense, track-like arrangements, with individual SHIs generating chains of cavities along their trajectories. This track structure becomes progressively less distinct with increasing Al content and is no longer resolvable by TEM at x = 0.33, where cavities instead start to appear as spatially dispersed features. Additionally, increasing Al composition systematically suppresses cavity formation, yielding a significant reduction in cavity size. This compositional dependence is attributed to the interplay between Al-content-dependent thermal conductivity and bonding strength. These findings establish a fundamental understanding of how SHI-induced radiation damage evolves with alloy composition in AlxGa1−xN, offering critical insights for the design of radiation-tolerant nitride semiconductor devices.

  • Spatially resolved heavy ion microprobe testing of lateral Ga2O3 MOSFETs

    by Daram N. Ramdin, Adam Charnas, Eric C. O'QUinn, Cale Overstreet, Kay-Obbe Voss, Cameron Gorsak, Hari Nair, Andrew J. Green, Thaddeus J. Asel, Shin Mou, et al.

    Ultrawide bandgap β-Ga2O3 has been intensively researched for power electronics applications after the first demonstration of high quality MOSFETs and MESFETs in 2012. Testing of β-Ga2O3 transistor structures under heavy ion irradiation is relatively unexplored despite its criticality in developing next-generation radiation-hardened electronics for space applications. Single ion irradiation was performed with 192 MeV Ar and 1182 MeV Au and a lateral spatial resolution of ∼0.5 μm to map the electrical characteristics of β-Ga2O3 MOSFETs as a function of irradiation position and identify the most sensitive regions of the device. This work determines that standard Ga2O3 MOSFETs are not susceptible to single event burnout under in operando irradiation under an applied field of 0.83 MV/cm for Ar irradiation as well as an applied field of 0.07 MV/cm for Au irradiation. Successive irradiations reveal transient increases in drain current associated with threshold voltage shifts attributed to defect generation/ionization in the top atomic layer deposited-Al2O3 dielectric or the semi-insulating Ga2O3 substrate and subsequent thermal relaxation. Fitting in situ transfer curve data reveals that the dominant effect under heavy ion irradiation is the activation of the parasitic channel via the generation of net positive charge at the buffer–substrate interface.

  • Nondestructive measurement of carrier mobility in HEMT epi-structures

    by Jian V. Li, Yi-Chen Liu, Jacklyn Zhu, Savannah R. Eisner, Thaddeus J. Asel, Adam T. Neal, Shin Mou

    We report mercury-probe measurement of the carrier mobility in the two-dimensional electron gas (2DEG) of the epi-structure for GaN-based high electron mobility transistors (HEMTs). This nondestructive method requires no contact metal deposition. The mobility is extracted from the dielectric relaxation frequency of the 2DEG moderated by the barrier layer of the HEMT epi-structure, which is manifested as the inflection frequency of the gate capacitance versus frequency curve. We define the sheet capacitance as the in-plane capacitance of a square thin film to elucidate 2DEG’s large dielectric relaxation frequency and HEMT’s superior high-frequency performance.

  • Open Access

    Semiclassical theories of scattering mechanisms on 2DEG transport and the enhancement of electron mobility in Al(Ga)N/GaN heterostructures

    by Gongyi Hong, Adam T Neal, Shin Mou

    Two-dimensional electron gases (2DEGs) play a central role in a wide range of electronic components. A thorough understanding of mobility-limiting scattering mechanisms is therefore crucial for the design of high-performance devices. In particular, with continuing device miniaturization, scattering processes such as interface roughness (IFR) scattering increasingly influence the mobility of more confined 2DEGs. This paper reviews the theoretical treatment of the essential scattering mechanisms within the effective mass theory, along with the solution of the Boltzmann transport equation via linearization and the momentum relaxation time approximation. An AlN/GaN high-electron-mobility transistor (HEMT) with experimentally measured mobility is used to evaluate multiple IFR scattering models and to examine the effect of static free-carrier screening on polar optical phonon (POP) scattering. Furthermore, to facilitate reproducibility, the inverse momentum relaxation time of each individual scattering mechanism is presented for a 2DEG density of 1×10 13 cm −2 . Finally, recent theoretical predictions of mobility enhancement in AlN/GaN HEMTs are highlighted.


  • Open Access

    Growth of a -plane BaTiO3 on a -plane β -Ga2O3 by molecular-beam epitaxy

    by Kathy Azizie, Naomi A. Pieczulewski, Nicholas A. Parker, Jian V. Li, Nolan S. Hendricks, Kyle J. Liddy, Yorick A. Birkhölzer, Eric A. Welp, Luke Omodt, Thaddeus J. Asel, et al.

    We demonstrate the epitaxial growth of single-phase (100) BaTiO3 films on (100) β-Ga2O3 substrates at substrate temperatures ranging from 600 to 700 °C using molecular-beam epitaxy. Characterization of a 47 nm thick BaTiO3 film by atomic force microscopy reveals a step-and-terrace morphology with unit-cell-high BaTiO3 steps and an rms surface roughness of 0.26 nm. Scanning transmission electron microscopy (STEM) images show that in some regions the β-Ga2O3 substrate terminates with a (100)A plane as it transitions to BaTiO3 and in other regions with a (100)B plane. The (100) BaTiO3 films are fully relaxed and consist of a mixture of two types of a-axis domains: a1 and a2. The orientation relationship determined by X-ray diffraction and confirmed by STEM is (100) BaTiO3 || (100) β-Ga2O3 and [011] BaTiO3||[010] β-Ga2O3. Despite the average linear lattice mismatch of 3.8%, BaTiO3 films with rocking curve full width at half maximum widths as narrow as 28 arc sec are achieved. From capacitance–voltage measurements on a metal–oxide–semiconductor capacitor structure with a-axis BaTiO3 as the oxide layer and Si-doped β-Ga2O3 as the semiconducting layer, we extract a dielectric constant of K11 = 670 for the BaTiO3 epitaxially integrated with (100) β-Ga2O3. We anticipate that this high-K epitaxial dielectric will be useful for electric-field management in β-Ga2O3-based device structures.

  • Open Access

    Impact of Ga overpressure on the metal modulation epitaxy growth of AlN/AlGaN short period superlattices

    by Alexander Chaney, Kent Averett, Thaddeus J. Asel, Shin Mou

    The formation of AlN/AlGaN short period superlattices (SPSLs) was investigated though the introduction of a constant Ga overpressure during the metal modulated epitaxy (MME) growth of AlN. A combination of x-ray diffraction (XRD) and scanning transmission electron microscopy (STEM) analyses found that control over the Al composition in the AlGaN layer was achieved through modulating the Ga beam equivalent pressure (BEP), with a minimum partial pressure of 3 × 10−7 Torr needed for Ga to incorporate at a growth temperature of 825 °C. A minimum Al composition in the AlGaN layer of 72% was achieved for a Ga BEP of 1 × 10−6 Torr using this method. An apparent limit of the AlGaN layer thickness of 3–4 ML indicated that the incorporation of Ga was confined to the consumption region of the MME growth process. Determination of this behavior made clear the requirements of having both XRD and STEM in order to be able to fully characterize the SPSL layer structure. Finally, AFM imaging highlighted that the presence of Ga on the surface behaved as a surfactant, with a minimum RMS roughness of 0.46 nm achieved at the maximum Ga BEP of 1 × 10−6 Torr.


  • Open Access

    Modeling interface roughness scattering with incorporation of potential energy and wave-function fluctuations: Enhancing mobility in AlN/GaN digital alloys

    by Gongyi Hong, Alexander Chaney, Adam Charnas, Yunjo Kim, Thaddeus J. Asel, Adam T. Neal, Shin Mou

    Interface roughness (IFR) scattering significantly impacts the mobility of two-dimensional electron gases (2DEGs) in heterostructures. While existing models for IFR scattering have advanced our understanding, they have notable limitations. The model developed by Jin et al. in 2007, while incorporating a realistic barrier height and roughness-induced changes in potential and subband wave-functions, employs a first-order roughness expansion. The formulation introduced by Lizzit et al. in 2014, although avoiding the first-order approximation for better higher-order effect modeling, omits IFR-induced change in electron density distribution. To address these limitations, we introduce a novel model that comprehensively accounts for all IFR-induced effects while avoiding any expansion approximations, by incorporating IFR-modified subband energies and wave-functions obtained from the numerical solution of the Schrödinger equation during the calculation of IFR scattering matrix elements. In addition, we have included models for other relevant scattering mechanisms, including charged dislocation lines, ionized impurities, acoustic phonons, and polar optical phonons. A comprehensive numerical analysis of carrier mobility has been performed for an AlN/GaN high electron mobility transistor, yielding results consistent with experimental data. Furthermore, to investigate the impact of device architecture on 2DEG mobility, we study the effects of layer thickness and modulation doping profiles in AlN/GaN digital alloys. Our findings reveal strategies for engineering high mobility at elevated 2DEG concentrations, potentially advancing the development of high-performance semiconductor devices.


  • Open Access

    Epitaxial growth of α-(AlxGa1−x)2O3 by suboxide molecular-beam epitaxy at 1 µm/h

    by Jacob Steele, Kathy Azizie, Naomi Pieczulewski, Yunjo Kim, Shin Mou, Thaddeus J. Asel, Adam T. Neal, Debdeep Jena, Huili G. Xing, David A. Muller, et al.

    We report the use of suboxide molecular-beam epitaxy (S-MBE) to grow α-(AlxGa1−x)2O3 films on (110) sapphire substrates over the 0 < x < 0.95 range of aluminum content. In S-MBE, 99.98% of the gallium-containing molecular beam arrives at the substrate in a preoxidized form as gallium suboxide (Ga2O). This bypasses the rate-limiting step of conventional MBE for the growth of gallium oxide (Ga2O3) from a gallium molecular beam and allows us to grow fully epitaxial α-(AlxGa1−x)2O3 films at growth rates exceeding 1 µm/h and relatively low substrate temperature (Tsub = 605 ± 15 °C). The ability to grow α-(AlxGa1−x)2O3 over the nominally full composition range is confirmed by Vegard’s law applied to the x-ray diffraction data and by optical bandgap measurements with ultraviolet–visible spectroscopy. We show that S-MBE allows straightforward composition control and bandgap selection for α-(AlxGa1−x)2O3 films as the aluminum incorporation x in the film is linear with the relative flux ratio of aluminum to Ga2O. The films are characterized by atomic-force microscopy, x-ray diffraction, and scanning transmission electron microscopy (STEM). These α-(AlxGa1−x)2O3 films grown by S-MBE at record growth rates exhibit a rocking curve full width at half maximum of ≊ 12 arc secs, rms roughness <1 nm, and are fully commensurate for x ≥ 0.5 for 20–50 nm thick films. STEM imaging of the x = 0.78 sample reveals high structural quality and uniform composition. Despite the high structural quality of the films, our attempts at doping with silicon result in highly insulating films.


  • Investigation of Si incorporation in (010) β-Ga2O3 films grown by plasma-assisted MBE using diluted disilane as Si source and suboxide Ga2O precursor

    by Zhuoqun Wen, Xin Zhai, Cindy Lee, Stefan Kosanovic, Yunjo Kim, Adam T. Neal, Thaddeus Asel, Shin Mou, Elaheh Ahmadi

    Traditionally, elemental Ga and Si have been used to supply Ga and Si, respectively, in molecular beam epitaxy (MBE) to grow Si-doped β-Ga2O3. In this work, we investigated the feasibility of enhancing the β-Ga2O3 growth rate by using a Ga-suboxide precursor in a plasma-assisted MBE. Additionally, Si doping of β-Ga2O3 using diluted disilane and Ga-suboxide as the Si and Ga precursors, respectively, was studied. The growth rate and film quality under different suboxide fluxes were inspected. We found that Si concentration has an inverse relationship with Ga2O flux due to atom competition. A room-temperature mobility of 115 cm2/V s was measured for an electron concentration of 1.2 × 1017 cm−3 on the sample grown using a Ga2O beam equivalent pressure of 1.1 × 10−7 Torr and a disilane flow rate of 0.006 sccm. Temperature-dependent Hall characterization was performed on this sample, revealing compensating acceptor and neutral impurity densities of 2.70 × 1015 and 8.23 × 1017 cm−3, respectively.


  • Low-temperature electrical properties and barrier inhomogeneities in ITO/β-Ga2O3 Schottky diode

    by Sanjoy Paul, Roberto Lopez, Adam T. Neal, Shin Mou, Jian V. Li

    This study reports the electronic properties of the indium tin oxide (ITO)/β-Ga2O3 Schottky diode through the temperature (50–320 K)-dependent current density–voltage, capacitance–voltage, and admittance spectroscopy experiments. The room-temperature turn-on voltage of the ITO/β-Ga2O3 diode was observed to be 0.83 V, and it exhibited a slow increase with decreasing temperature. The ITO/β-Ga2O3 diode's ideality factor (n) varied from 3.92 to 1.05, and the zero-bias Schottky barrier height (φbo) varied from 0.31 to 1.28 eV. The temperature-dependent n and φbo indicate the spatial inhomogeneities of the potential barrier at the Ga2O3-ITO interface. We exploit the Gaussian distribution model to explain the Schottky barrier inhomogeneities, which could be associated with the defects observed by the admittance spectroscopy method.