Adam T. Neal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adam T. Neal has a total of 248 co-authors. Here are the top co-authors by number of shared publications:
- Shin Mou
Foundational Technologies Directorate, Air Force Research Laboratory 3 , WPAFB, Ohio 45433
21 shared publications Han Liu
School of Electrical and Computer Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907, United States
11 shared publicationsPeide D. Ye
School of Electrical and Computer Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907, United States
11 shared publicationsShin Mou
Air Force Research Laboratory, Materials and Manufacturing Directorate 2 , Wright Patterson Air Force Base, Ohio 45433, USA
9 shared publications- Yuchen Du
Purdue University School of Electrical and Computer Engineering and Birck Nanotechnology Center West Lafayette, Indiana 47907, USA
9 shared publications J. J. Gu
School of Electrical and Computer Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, IN 47906, U.S.A.
6 shared publications
Latest Publications
- 9 November 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (19)
Effect of aluminum composition on cavity formation in Al x Ga1− x N alloys under swift heavy ion irradiation
AlGaN/GaN high-electron-mobility transistors are promising candidates for next-generation semiconductor devices operating in radiation-rich environments. This study investigates irradiation-induced microstructural damage in AlxGa1−xN under swift heavy ion (SHI) irradiation as a function of alloy composition. AlxGa1−xN samples spanning the compositional range from x = 0 to 0.66 were irradiated with 946 MeV Au ions at fluences of 2 × 1011 and 3 × 1011 ions/cm2. Post-irradiation transmission electron microscopy (TEM) and atomistic simulations consistently reveal nanometer-scale cavity formation across all compositions, with cavity morphology exhibiting a strong compositional dependence. In GaN (x = 0), cavities adopt dense, track-like arrangements, with individual SHIs generating chains of cavities along their trajectories. This track structure becomes progressively less distinct with increasing Al content and is no longer resolvable by TEM at x = 0.33, where cavities instead start to appear as spatially dispersed features. Additionally, increasing Al composition systematically suppresses cavity formation, yielding a significant reduction in cavity size. This compositional dependence is attributed to the interplay between Al-content-dependent thermal conductivity and bonding strength. These findings establish a fundamental understanding of how SHI-induced radiation damage evolves with alloy composition in AlxGa1−xN, offering critical insights for the design of radiation-tolerant nitride semiconductor devices.
- 9 November 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (19)
Effect of aluminum composition on cavity formation in Al x Ga1− x N alloys under swift heavy ion irradiation
AlGaN/GaN high-electron-mobility transistors are promising candidates for next-generation semiconductor devices operating in radiation-rich environments. This study investigates irradiation-induced microstructural damage in AlxGa1−xN under swift heavy ion (SHI) irradiation as a function of alloy composition. AlxGa1−xN samples spanning the compositional range from x = 0 to 0.66 were irradiated with 946 MeV Au ions at fluences of 2 × 1011 and 3 × 1011 ions/cm2. Post-irradiation transmission electron microscopy (TEM) and atomistic simulations consistently reveal nanometer-scale cavity formation across all compositions, with cavity morphology exhibiting a strong compositional dependence. In GaN (x = 0), cavities adopt dense, track-like arrangements, with individual SHIs generating chains of cavities along their trajectories. This track structure becomes progressively less distinct with increasing Al content and is no longer resolvable by TEM at x = 0.33, where cavities instead start to appear as spatially dispersed features. Additionally, increasing Al composition systematically suppresses cavity formation, yielding a significant reduction in cavity size. This compositional dependence is attributed to the interplay between Al-content-dependent thermal conductivity and bonding strength. These findings establish a fundamental understanding of how SHI-induced radiation damage evolves with alloy composition in AlxGa1−xN, offering critical insights for the design of radiation-tolerant nitride semiconductor devices.
- 26 October 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (17)
Spatially resolved heavy ion microprobe testing of lateral Ga2O3 MOSFETs
Ultrawide bandgap β-Ga2O3 has been intensively researched for power electronics applications after the first demonstration of high quality MOSFETs and MESFETs in 2012. Testing of β-Ga2O3 transistor structures under heavy ion irradiation is relatively unexplored despite its criticality in developing next-generation radiation-hardened electronics for space applications. Single ion irradiation was performed with 192 MeV Ar and 1182 MeV Au and a lateral spatial resolution of ∼0.5 μm to map the electrical characteristics of β-Ga2O3 MOSFETs as a function of irradiation position and identify the most sensitive regions of the device. This work determines that standard Ga2O3 MOSFETs are not susceptible to single event burnout under in operando irradiation under an applied field of 0.83 MV/cm for Ar irradiation as well as an applied field of 0.07 MV/cm for Au irradiation. Successive irradiations reveal transient increases in drain current associated with threshold voltage shifts attributed to defect generation/ionization in the top atomic layer deposited-Al2O3 dielectric or the semi-insulating Ga2O3 substrate and subsequent thermal relaxation. Fitting in situ transfer curve data reveals that the dominant effect under heavy ion irradiation is the activation of the parasitic channel via the generation of net positive charge at the buffer–substrate interface.
- 26 October 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (17)
Spatially resolved heavy ion microprobe testing of lateral Ga2O3 MOSFETs
Ultrawide bandgap β-Ga2O3 has been intensively researched for power electronics applications after the first demonstration of high quality MOSFETs and MESFETs in 2012. Testing of β-Ga2O3 transistor structures under heavy ion irradiation is relatively unexplored despite its criticality in developing next-generation radiation-hardened electronics for space applications. Single ion irradiation was performed with 192 MeV Ar and 1182 MeV Au and a lateral spatial resolution of ∼0.5 μm to map the electrical characteristics of β-Ga2O3 MOSFETs as a function of irradiation position and identify the most sensitive regions of the device. This work determines that standard Ga2O3 MOSFETs are not susceptible to single event burnout under in operando irradiation under an applied field of 0.83 MV/cm for Ar irradiation as well as an applied field of 0.07 MV/cm for Au irradiation. Successive irradiations reveal transient increases in drain current associated with threshold voltage shifts attributed to defect generation/ionization in the top atomic layer deposited-Al2O3 dielectric or the semi-insulating Ga2O3 substrate and subsequent thermal relaxation. Fitting in situ transfer curve data reveals that the dominant effect under heavy ion irradiation is the activation of the parasitic channel via the generation of net positive charge at the buffer–substrate interface.
- 1 July 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (4)
Nondestructive measurement of carrier mobility in HEMT epi-structures
We report mercury-probe measurement of the carrier mobility in the two-dimensional electron gas (2DEG) of the epi-structure for GaN-based high electron mobility transistors (HEMTs). This nondestructive method requires no contact metal deposition. The mobility is extracted from the dielectric relaxation frequency of the 2DEG moderated by the barrier layer of the HEMT epi-structure, which is manifested as the inflection frequency of the gate capacitance versus frequency curve. We define the sheet capacitance as the in-plane capacitance of a square thin film to elucidate 2DEG’s large dielectric relaxation frequency and HEMT’s superior high-frequency performance.
- 1 July 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (4)
Nondestructive measurement of carrier mobility in HEMT epi-structures
We report mercury-probe measurement of the carrier mobility in the two-dimensional electron gas (2DEG) of the epi-structure for GaN-based high electron mobility transistors (HEMTs). This nondestructive method requires no contact metal deposition. The mobility is extracted from the dielectric relaxation frequency of the 2DEG moderated by the barrier layer of the HEMT epi-structure, which is manifested as the inflection frequency of the gate capacitance versus frequency curve. We define the sheet capacitance as the in-plane capacitance of a square thin film to elucidate 2DEG’s large dielectric relaxation frequency and HEMT’s superior high-frequency performance.
- Open Access
- 1 June 2026
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 41 (6) , 063001
Semiclassical theories of scattering mechanisms on 2DEG transport and the enhancement of electron mobility in Al(Ga)N/GaN heterostructures
Two-dimensional electron gases (2DEGs) play a central role in a wide range of electronic components. A thorough understanding of mobility-limiting scattering mechanisms is therefore crucial for the design of high-performance devices. In particular, with continuing device miniaturization, scattering processes such as interface roughness (IFR) scattering increasingly influence the mobility of more confined 2DEGs. This paper reviews the theoretical treatment of the essential scattering mechanisms within the effective mass theory, along with the solution of the Boltzmann transport equation via linearization and the momentum relaxation time approximation. An AlN/GaN high-electron-mobility transistor (HEMT) with experimentally measured mobility is used to evaluate multiple IFR scattering models and to examine the effect of static free-carrier screening on polar optical phonon (POP) scattering. Furthermore, to facilitate reproducibility, the inverse momentum relaxation time of each individual scattering mechanism is presented for a 2DEG density of 1×10 13 cm −2 . Finally, recent theoretical predictions of mobility enhancement in AlN/GaN HEMTs are highlighted.
- 1 June 2026
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 41 (6) , 063001
Open AccessSemiclassical theories of scattering mechanisms on 2DEG transport and the enhancement of electron mobility in Al(Ga)N/GaN heterostructures
Two-dimensional electron gases (2DEGs) play a central role in a wide range of electronic components. A thorough understanding of mobility-limiting scattering mechanisms is therefore crucial for the design of high-performance devices. In particular, with continuing device miniaturization, scattering processes such as interface roughness (IFR) scattering increasingly influence the mobility of more confined 2DEGs. This paper reviews the theoretical treatment of the essential scattering mechanisms within the effective mass theory, along with the solution of the Boltzmann transport equation via linearization and the momentum relaxation time approximation. An AlN/GaN high-electron-mobility transistor (HEMT) with experimentally measured mobility is used to evaluate multiple IFR scattering models and to examine the effect of static free-carrier screening on polar optical phonon (POP) scattering. Furthermore, to facilitate reproducibility, the inverse momentum relaxation time of each individual scattering mechanism is presented for a 2DEG density of 1×10 13 cm −2 . Finally, recent theoretical predictions of mobility enhancement in AlN/GaN HEMTs are highlighted.
- Open Access
- 27 December 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (24)
Modeling interface roughness scattering with incorporation of potential energy and wave-function fluctuations: Enhancing mobility in AlN/GaN digital alloys
Interface roughness (IFR) scattering significantly impacts the mobility of two-dimensional electron gases (2DEGs) in heterostructures. While existing models for IFR scattering have advanced our understanding, they have notable limitations. The model developed by Jin et al. in 2007, while incorporating a realistic barrier height and roughness-induced changes in potential and subband wave-functions, employs a first-order roughness expansion. The formulation introduced by Lizzit et al. in 2014, although avoiding the first-order approximation for better higher-order effect modeling, omits IFR-induced change in electron density distribution. To address these limitations, we introduce a novel model that comprehensively accounts for all IFR-induced effects while avoiding any expansion approximations, by incorporating IFR-modified subband energies and wave-functions obtained from the numerical solution of the Schrödinger equation during the calculation of IFR scattering matrix elements. In addition, we have included models for other relevant scattering mechanisms, including charged dislocation lines, ionized impurities, acoustic phonons, and polar optical phonons. A comprehensive numerical analysis of carrier mobility has been performed for an AlN/GaN high electron mobility transistor, yielding results consistent with experimental data. Furthermore, to investigate the impact of device architecture on 2DEG mobility, we study the effects of layer thickness and modulation doping profiles in AlN/GaN digital alloys. Our findings reveal strategies for engineering high mobility at elevated 2DEG concentrations, potentially advancing the development of high-performance semiconductor devices.
- 27 December 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (24)
Open AccessModeling interface roughness scattering with incorporation of potential energy and wave-function fluctuations: Enhancing mobility in AlN/GaN digital alloys
Interface roughness (IFR) scattering significantly impacts the mobility of two-dimensional electron gases (2DEGs) in heterostructures. While existing models for IFR scattering have advanced our understanding, they have notable limitations. The model developed by Jin et al. in 2007, while incorporating a realistic barrier height and roughness-induced changes in potential and subband wave-functions, employs a first-order roughness expansion. The formulation introduced by Lizzit et al. in 2014, although avoiding the first-order approximation for better higher-order effect modeling, omits IFR-induced change in electron density distribution. To address these limitations, we introduce a novel model that comprehensively accounts for all IFR-induced effects while avoiding any expansion approximations, by incorporating IFR-modified subband energies and wave-functions obtained from the numerical solution of the Schrödinger equation during the calculation of IFR scattering matrix elements. In addition, we have included models for other relevant scattering mechanisms, including charged dislocation lines, ionized impurities, acoustic phonons, and polar optical phonons. A comprehensive numerical analysis of carrier mobility has been performed for an AlN/GaN high electron mobility transistor, yielding results consistent with experimental data. Furthermore, to investigate the impact of device architecture on 2DEG mobility, we study the effects of layer thickness and modulation doping profiles in AlN/GaN digital alloys. Our findings reveal strategies for engineering high mobility at elevated 2DEG concentrations, potentially advancing the development of high-performance semiconductor devices.
- Open Access
- 1 April 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (4)
Epitaxial growth of α-(AlxGa1−x)2O3 by suboxide molecular-beam epitaxy at 1 µm/h
We report the use of suboxide molecular-beam epitaxy (S-MBE) to grow α-(AlxGa1−x)2O3 films on (110) sapphire substrates over the 0 < x < 0.95 range of aluminum content. In S-MBE, 99.98% of the gallium-containing molecular beam arrives at the substrate in a preoxidized form as gallium suboxide (Ga2O). This bypasses the rate-limiting step of conventional MBE for the growth of gallium oxide (Ga2O3) from a gallium molecular beam and allows us to grow fully epitaxial α-(AlxGa1−x)2O3 films at growth rates exceeding 1 µm/h and relatively low substrate temperature (Tsub = 605 ± 15 °C). The ability to grow α-(AlxGa1−x)2O3 over the nominally full composition range is confirmed by Vegard’s law applied to the x-ray diffraction data and by optical bandgap measurements with ultraviolet–visible spectroscopy. We show that S-MBE allows straightforward composition control and bandgap selection for α-(AlxGa1−x)2O3 films as the aluminum incorporation x in the film is linear with the relative flux ratio of aluminum to Ga2O. The films are characterized by atomic-force microscopy, x-ray diffraction, and scanning transmission electron microscopy (STEM). These α-(AlxGa1−x)2O3 films grown by S-MBE at record growth rates exhibit a rocking curve full width at half maximum of ≊ 12 arc secs, rms roughness <1 nm, and are fully commensurate for x ≥ 0.5 for 20–50 nm thick films. STEM imaging of the x = 0.78 sample reveals high structural quality and uniform composition. Despite the high structural quality of the films, our attempts at doping with silicon result in highly insulating films.
- 1 April 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (4)
Open AccessEpitaxial growth of α-(AlxGa1−x)2O3 by suboxide molecular-beam epitaxy at 1 µm/h
We report the use of suboxide molecular-beam epitaxy (S-MBE) to grow α-(AlxGa1−x)2O3 films on (110) sapphire substrates over the 0 < x < 0.95 range of aluminum content. In S-MBE, 99.98% of the gallium-containing molecular beam arrives at the substrate in a preoxidized form as gallium suboxide (Ga2O). This bypasses the rate-limiting step of conventional MBE for the growth of gallium oxide (Ga2O3) from a gallium molecular beam and allows us to grow fully epitaxial α-(AlxGa1−x)2O3 films at growth rates exceeding 1 µm/h and relatively low substrate temperature (Tsub = 605 ± 15 °C). The ability to grow α-(AlxGa1−x)2O3 over the nominally full composition range is confirmed by Vegard’s law applied to the x-ray diffraction data and by optical bandgap measurements with ultraviolet–visible spectroscopy. We show that S-MBE allows straightforward composition control and bandgap selection for α-(AlxGa1−x)2O3 films as the aluminum incorporation x in the film is linear with the relative flux ratio of aluminum to Ga2O. The films are characterized by atomic-force microscopy, x-ray diffraction, and scanning transmission electron microscopy (STEM). These α-(AlxGa1−x)2O3 films grown by S-MBE at record growth rates exhibit a rocking curve full width at half maximum of ≊ 12 arc secs, rms roughness <1 nm, and are fully commensurate for x ≥ 0.5 for 20–50 nm thick films. STEM imaging of the x = 0.78 sample reveals high structural quality and uniform composition. Despite the high structural quality of the films, our attempts at doping with silicon result in highly insulating films.
- 18 March 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (12)
Investigation of Si incorporation in (010) β-Ga2O3 films grown by plasma-assisted MBE using diluted disilane as Si source and suboxide Ga2O precursor
Traditionally, elemental Ga and Si have been used to supply Ga and Si, respectively, in molecular beam epitaxy (MBE) to grow Si-doped β-Ga2O3. In this work, we investigated the feasibility of enhancing the β-Ga2O3 growth rate by using a Ga-suboxide precursor in a plasma-assisted MBE. Additionally, Si doping of β-Ga2O3 using diluted disilane and Ga-suboxide as the Si and Ga precursors, respectively, was studied. The growth rate and film quality under different suboxide fluxes were inspected. We found that Si concentration has an inverse relationship with Ga2O flux due to atom competition. A room-temperature mobility of 115 cm2/V s was measured for an electron concentration of 1.2 × 1017 cm−3 on the sample grown using a Ga2O beam equivalent pressure of 1.1 × 10−7 Torr and a disilane flow rate of 0.006 sccm. Temperature-dependent Hall characterization was performed on this sample, revealing compensating acceptor and neutral impurity densities of 2.70 × 1015 and 8.23 × 1017 cm−3, respectively.
- 18 March 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (12)
Investigation of Si incorporation in (010) β-Ga2O3 films grown by plasma-assisted MBE using diluted disilane as Si source and suboxide Ga2O precursor
Traditionally, elemental Ga and Si have been used to supply Ga and Si, respectively, in molecular beam epitaxy (MBE) to grow Si-doped β-Ga2O3. In this work, we investigated the feasibility of enhancing the β-Ga2O3 growth rate by using a Ga-suboxide precursor in a plasma-assisted MBE. Additionally, Si doping of β-Ga2O3 using diluted disilane and Ga-suboxide as the Si and Ga precursors, respectively, was studied. The growth rate and film quality under different suboxide fluxes were inspected. We found that Si concentration has an inverse relationship with Ga2O flux due to atom competition. A room-temperature mobility of 115 cm2/V s was measured for an electron concentration of 1.2 × 1017 cm−3 on the sample grown using a Ga2O beam equivalent pressure of 1.1 × 10−7 Torr and a disilane flow rate of 0.006 sccm. Temperature-dependent Hall characterization was performed on this sample, revealing compensating acceptor and neutral impurity densities of 2.70 × 1015 and 8.23 × 1017 cm−3, respectively.
- 1 March 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (2)
Low-temperature electrical properties and barrier inhomogeneities in ITO/β-Ga2O3 Schottky diode
This study reports the electronic properties of the indium tin oxide (ITO)/β-Ga2O3 Schottky diode through the temperature (50–320 K)-dependent current density–voltage, capacitance–voltage, and admittance spectroscopy experiments. The room-temperature turn-on voltage of the ITO/β-Ga2O3 diode was observed to be 0.83 V, and it exhibited a slow increase with decreasing temperature. The ITO/β-Ga2O3 diode's ideality factor (n) varied from 3.92 to 1.05, and the zero-bias Schottky barrier height (φbo) varied from 0.31 to 1.28 eV. The temperature-dependent n and φbo indicate the spatial inhomogeneities of the potential barrier at the Ga2O3-ITO interface. We exploit the Gaussian distribution model to explain the Schottky barrier inhomogeneities, which could be associated with the defects observed by the admittance spectroscopy method.
- 1 March 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (2)
Low-temperature electrical properties and barrier inhomogeneities in ITO/β-Ga2O3 Schottky diode
This study reports the electronic properties of the indium tin oxide (ITO)/β-Ga2O3 Schottky diode through the temperature (50–320 K)-dependent current density–voltage, capacitance–voltage, and admittance spectroscopy experiments. The room-temperature turn-on voltage of the ITO/β-Ga2O3 diode was observed to be 0.83 V, and it exhibited a slow increase with decreasing temperature. The ITO/β-Ga2O3 diode's ideality factor (n) varied from 3.92 to 1.05, and the zero-bias Schottky barrier height (φbo) varied from 0.31 to 1.28 eV. The temperature-dependent n and φbo indicate the spatial inhomogeneities of the potential barrier at the Ga2O3-ITO interface. We exploit the Gaussian distribution model to explain the Schottky barrier inhomogeneities, which could be associated with the defects observed by the admittance spectroscopy method.
- Open Access
- 20 December 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (1)
Melt-grown semi-insulating Mn:β-Ga2O3 single crystals exhibiting unique visible absorptions and luminescence
Several acceptor dopants have been explored in β-Ga2O3 to produce semi-insulating substrates and epitaxial films. Fe and Mg make up the majority of research thus far; however, other transition metals provide potential alternatives for optimized performance. β-Ga2O3 bulk single crystals were grown by the Czochralski and vertical gradient freeze methods with a nominal dopant concentration of 0.25 at. % Mn. Ultraviolet-visible-near infrared spectroscopy and photoluminescence revealed polarization- and orientation-dependent optical absorptions (pleochroism) coupled with an orange luminescence. All samples were electrically insulating, on the order of 109–1011 ohm cm at room temperature, indicative of acceptor doping. Actual dopant concentrations of the intentionally doped transition metal and background impurities were determined via glow discharge mass spectrometry, indicating the macroscale segregation behavior. High-temperature resistivity measurements indicated an experimental acceptor level of 1.7 ± 0.2 eV. Hydrogenation of samples resulted in an increase in the orange luminescence and O–H stretching modes observable in the infrared spectrum. Density functional theory calculations were performed to determine the likely site-occupancy and acceptor level of Mn in the bandgap.
- 20 December 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (1)
Open AccessMelt-grown semi-insulating Mn:β-Ga2O3 single crystals exhibiting unique visible absorptions and luminescence
Several acceptor dopants have been explored in β-Ga2O3 to produce semi-insulating substrates and epitaxial films. Fe and Mg make up the majority of research thus far; however, other transition metals provide potential alternatives for optimized performance. β-Ga2O3 bulk single crystals were grown by the Czochralski and vertical gradient freeze methods with a nominal dopant concentration of 0.25 at. % Mn. Ultraviolet-visible-near infrared spectroscopy and photoluminescence revealed polarization- and orientation-dependent optical absorptions (pleochroism) coupled with an orange luminescence. All samples were electrically insulating, on the order of 109–1011 ohm cm at room temperature, indicative of acceptor doping. Actual dopant concentrations of the intentionally doped transition metal and background impurities were determined via glow discharge mass spectrometry, indicating the macroscale segregation behavior. High-temperature resistivity measurements indicated an experimental acceptor level of 1.7 ± 0.2 eV. Hydrogenation of samples resulted in an increase in the orange luminescence and O–H stretching modes observable in the infrared spectrum. Density functional theory calculations were performed to determine the likely site-occupancy and acceptor level of Mn in the bandgap.
- Open Access
- 10 October 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 15, 9
Growth of 6.2 Å semiconductor topological materials on lattice engineered virtual substrates
SPIE Digital Library Proceedings
- 10 October 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 15, 9
Open AccessGrowth of 6.2 Å semiconductor topological materials on lattice engineered virtual substrates
SPIE Digital Library Proceedings