Maurice Hott
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Maurice Hott has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Peter Adam Hoeher
Faculty of Engineering, Kiel University, Kiel, Germany
5 shared publications - Julius Maximilian Placzek
Faculty of Engineering, Kiel University, Kiel, Germany
2 shared publications - Andrej Harlakin
Department of Electrical and Information Engineering, Kiel University, Kiel, Germany
1 shared publication Cedric Isokeit
Institute of Computer Engineering, Luebeck University, Luebeck, Germany
1 shared publication- Erik Maehle
University of Lübeck
1 shared publication Jan Mietzner
1 shared publication
Latest Publications
- Open Access
- 5 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 50 (1) , 228-251
Multiheterogeneous AUV Swarm Technology Exemplified by the MAUS Project: Cooperation, Mission Planning and Hybrid Communication
The mobile autonomous underwater system (MAUS) aims to create next-generation vehicles, focusing on improved intelligence, mission operations, and application scenarios. Accordingly, two types of autonomous underwater vehicles (AUVs) have been developed to operate and collaborate in various applications. The first AUV, named “Hansel,” has hovering capabilities and is tailored to tasks, such as object inspection and detection. The second AUV, called “Gretel,” has going capabilities and is suitable for tasks, such as seafloor mapping. The two AUV types are equipped with different sensors, allowing them to perform distinct tasks simultaneously as a team. The going AUV has a robust navigation system that includes an inertial navigation system, an ultra-short baseline unit, and a Doppler velocity log for dead reckoning. In contrast, the hovering AUV only has a low-cost micro-electro-mechanical system. Gretel's navigation unit improves Hansel's navigation, along with data transfer between the vehicles. The AUVs rely on a hybrid communication system that integrates acoustic, inductive, and optical links to combine the strengths of each technology. To accomplish their individual goals, the AUVs participate in joint mission planning, utilizing a variety of sensors and tasks that are specific to each AUV. This approach is commonly referred to as multiheterogeneous AUV swarm technology. The multiheterogeneous concept developed in the MAUS project was experimentally validated in Kiel Fjord, located in the southwest Baltic Sea, and in La Spezia, Mediterranean Sea.
- 5 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 50 (1) , 228-251
Open AccessMultiheterogeneous AUV Swarm Technology Exemplified by the MAUS Project: Cooperation, Mission Planning and Hybrid Communication
The mobile autonomous underwater system (MAUS) aims to create next-generation vehicles, focusing on improved intelligence, mission operations, and application scenarios. Accordingly, two types of autonomous underwater vehicles (AUVs) have been developed to operate and collaborate in various applications. The first AUV, named “Hansel,” has hovering capabilities and is tailored to tasks, such as object inspection and detection. The second AUV, called “Gretel,” has going capabilities and is suitable for tasks, such as seafloor mapping. The two AUV types are equipped with different sensors, allowing them to perform distinct tasks simultaneously as a team. The going AUV has a robust navigation system that includes an inertial navigation system, an ultra-short baseline unit, and a Doppler velocity log for dead reckoning. In contrast, the hovering AUV only has a low-cost micro-electro-mechanical system. Gretel's navigation unit improves Hansel's navigation, along with data transfer between the vehicles. The AUVs rely on a hybrid communication system that integrates acoustic, inductive, and optical links to combine the strengths of each technology. To accomplish their individual goals, the AUVs participate in joint mission planning, utilizing a variety of sensors and tasks that are specific to each AUV. This approach is commonly referred to as multiheterogeneous AUV swarm technology. The multiheterogeneous concept developed in the MAUS project was experimentally validated in Kiel Fjord, located in the southwest Baltic Sea, and in La Spezia, Mediterranean Sea.
- Open Access
- 15 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 129431-129442
Multi-Resonant Frequency Shift Keying: A Novel and Efficient Modulation Scheme for Magnetic Communication
Magnetic communication is a promising technique in harsh environments, such as seawater. To enable efficient communication, transmitting and receiving coils are conventionally operated as part of resonant circuits. However, this results in narrow bandwidths and the associated disadvantages. Thus, most digital modulation schemes cannot be used efficiently on these systems. In this contribution, a mixed hardware/software approach for efficient frequency shift keying is presented. With this energy-efficient modulation concept, the full available bandwidth of a receiver can be utilized for data transmission, while all advantages of using a resonant circuit on the transmitter side can be retained. Towards this goal, a transmitter-side resonant circuit is designed, which supports discrete switching between multiple resonant frequencies. The data symbols are mapped onto these unique resonant frequencies. This prevents the parasitic amplitude modulation associated with conventional frequency shift keying applied to narrow bandwidth circuits, resulting in maximum transmitted magnitude and minimum symbol distortion without need for any further measures. Furthermore, the frequency spacing and/or the cardinality of the symbol alphabet can be increased considerably. At the receiver side, the classical pick-up coil is replaced by a high-sensitivity broadband magnetic field sensor. Numerical results of the mixed hardware/software scheme are provided, and are verified by an experimental setup. This setup is constructed using principles from the field of power electronics and demonstrates, how this modulation concept can be implemented with relatively simple and highly energy efficient electronics and without the use of linear amplifiers in particular.
- 15 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 129431-129442
Open AccessMulti-Resonant Frequency Shift Keying: A Novel and Efficient Modulation Scheme for Magnetic Communication
Magnetic communication is a promising technique in harsh environments, such as seawater. To enable efficient communication, transmitting and receiving coils are conventionally operated as part of resonant circuits. However, this results in narrow bandwidths and the associated disadvantages. Thus, most digital modulation schemes cannot be used efficiently on these systems. In this contribution, a mixed hardware/software approach for efficient frequency shift keying is presented. With this energy-efficient modulation concept, the full available bandwidth of a receiver can be utilized for data transmission, while all advantages of using a resonant circuit on the transmitter side can be retained. Towards this goal, a transmitter-side resonant circuit is designed, which supports discrete switching between multiple resonant frequencies. The data symbols are mapped onto these unique resonant frequencies. This prevents the parasitic amplitude modulation associated with conventional frequency shift keying applied to narrow bandwidth circuits, resulting in maximum transmitted magnitude and minimum symbol distortion without need for any further measures. Furthermore, the frequency spacing and/or the cardinality of the symbol alphabet can be increased considerably. At the receiver side, the classical pick-up coil is replaced by a high-sensitivity broadband magnetic field sensor. Numerical results of the mixed hardware/software scheme are provided, and are verified by an experimental setup. This setup is constructed using principles from the field of power electronics and demonstrates, how this modulation concept can be implemented with relatively simple and highly energy efficient electronics and without the use of linear amplifiers in particular.
- 5 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Channel Modeling and SNR Enhancement for Coil to Magnetic Field Sensor Underwater Communication
Conventional magneto-inductive communication systems use coils as a sender and receiver. These coils are usually bulky, which makes them unsuitable for use in mobile systems such as autonomous underwater vehicles. A proposed way to overcome this limitation on the receiver side is to replace the coil with a highly sensitive broadband magnetic field sensor. This reduces the receiver size significantly and enable mobile applications. In the present work this communication system approach is investigated with respect to underwater environments. In this context the underwater channel is studied for a homogeneous water column as well as for shallow water depths. Furthermore, it can be shown that an improvement of the signal-to-noise ratio can be achieved by using several sensors working in parallel. The results are verified by an experimental prototype.
- 5 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Channel Modeling and SNR Enhancement for Coil to Magnetic Field Sensor Underwater Communication
Conventional magneto-inductive communication systems use coils as a sender and receiver. These coils are usually bulky, which makes them unsuitable for use in mobile systems such as autonomous underwater vehicles. A proposed way to overcome this limitation on the receiver side is to replace the coil with a highly sensitive broadband magnetic field sensor. This reduces the receiver size significantly and enable mobile applications. In the present work this communication system approach is investigated with respect to underwater environments. In this context the underwater channel is studied for a homogeneous water column as well as for shallow water depths. Furthermore, it can be shown that an improvement of the signal-to-noise ratio can be achieved by using several sensors working in parallel. The results are verified by an experimental prototype.
- Open Access
- 24 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 177385-177394
Underwater Communication Employing High-Sensitive Magnetic Field Detectors
Magnetic communication is receiving significant interest in RF-challenging environments. Particularly in underwater environments and underground wireless sensor networks, magnetic communication is an emerging research area. In this paper, a new approach for magnetic underwater communication is presented and evaluated. In this approach, the receiver coil of a conventional magnetic induction communication system is replaced by a high-sensitive low-noise wideband magnetic field sensor. This concept enables a good detection sensitivity and, under certain conditions, an extended communication range. Most magnetic field sensors are small compared to equivalent search coils and offer a high bandwidth. Hence, they can be assembled in order to provide multiple-input multiple-output processing. Based on suitable channel modeling, trade-offs between system parameters are analyzed and the channel capacity is derived. Analytical results are supported by a prototype implementation. Potential application scenarios are studied, where emphasis is on mobile applications.
- 24 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 177385-177394
Open AccessUnderwater Communication Employing High-Sensitive Magnetic Field Detectors
Magnetic communication is receiving significant interest in RF-challenging environments. Particularly in underwater environments and underground wireless sensor networks, magnetic communication is an emerging research area. In this paper, a new approach for magnetic underwater communication is presented and evaluated. In this approach, the receiver coil of a conventional magnetic induction communication system is replaced by a high-sensitive low-noise wideband magnetic field sensor. This concept enables a good detection sensitivity and, under certain conditions, an extended communication range. Most magnetic field sensors are small compared to equivalent search coils and offer a high bandwidth. Hence, they can be assembled in order to provide multiple-input multiple-output processing. Based on suitable channel modeling, trade-offs between system parameters are analyzed and the channel capacity is derived. Analytical results are supported by a prototype implementation. Potential application scenarios are studied, where emphasis is on mobile applications.
- Open Access
Magnetic Communication Using High-Sensitivity Magnetic Field Detectors
In this article, an innovative approach for magnetic data communication is presented. For this purpose, the receiver coil of a conventional magneto-inductive communication system is replaced by a high-sensitivity wideband magnetic field sensor. The results show decisive advantages offered by sensitive magnetic field sensors, including a higher communication range for small receiver units. This approach supports numerous mobile applications where receiver size is limited, possibly in conjunction with multiple detectors. Numerical results are supported by a prototype implementation employing an anisotropic magneto-resistive sensor.
Open AccessMagnetic Communication Using High-Sensitivity Magnetic Field Detectors
In this article, an innovative approach for magnetic data communication is presented. For this purpose, the receiver coil of a conventional magneto-inductive communication system is replaced by a high-sensitivity wideband magnetic field sensor. The results show decisive advantages offered by sensitive magnetic field sensors, including a higher communication range for small receiver units. This approach supports numerous mobile applications where receiver size is limited, possibly in conjunction with multiple detectors. Numerical results are supported by a prototype implementation employing an anisotropic magneto-resistive sensor.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 126-129
Joint Super-Resolution and Array Interpolation for MIMO Radar Virtual Arrays
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 126-129
Joint Super-Resolution and Array Interpolation for MIMO Radar Virtual Arrays