IBIgor Alekseevich Bakin

Igor Alekseevich Bakin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Igor Alekseevich Bakin has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Solution of a mathematical model for foamed fish hydrolysate convective-microwave drying

    by Albert Hamed-Harisovich Nugmanov, Andrey Viktorovich Hadaev, Pavel Dmitrievich Osmolovskiy, Svetlana Klimentovna Ildirova, Igor Alekseevich Bakin

    The main problem leading to economic and environmental costs is the inefficient processing of protein and mineral waste from aquaculture. The valuable fish hydrolysate obtained from this waste requires effective dehydration, but traditional methods such as spray drying do not provide high productivity. The key solution is to intensify the dehydration process by combining several technological approaches. Initially, the hydrolysate is structured by foaming it with the addition of a thickener and stabilizer (such as guar gum), which creates the necessary porous matrix for moisture removal. The most effective drying method for this material is a combined microwave technology, often used in conjunction with convective energy supply. Its advantage lies in its ability to provide rapid and controlled volumetric heating of the porous structure of the foamed hydrolysate, significantly accelerating and intensifying the entire dehydration process. The article experimentally established rational process parameters: a layer thickness of 5 mm, an initial material temperature of (27 ± 2) °C, and a specific microwave power of 5 kW/m². Under these conditions, a moisture reduction from 81% to 8% was achieved in 7.5 minutes. The kinetic patterns of convective-microwave drying of the hydrolysate were identified. The authors developed and verified an adapted mathematical model of heat and mass transfer that takes into account the dependence of the material’s dielectric and thermophysical properties on humidity. The model’s solution showed that, under the specified conditions, the temperature in the layer does not exceed 65 °C in the first 4 minutes, after which it rises uncontrollably, defining the critical transition point from microwave heating to convective drying. The effectiveness of a two-stage hybrid mode was experimentally confirmed: 4-minute microwave drying (to 43.5 % humidity and 66°C) followed by 8-minute convective drying at an agent temperature of 75 °C, which allows for a moisture content reduction to 6 % while maintaining the quality of the heat-sensitive product.

  • Open Access

    SORPTION CAPACITY OF SUBLIMATED FRUIT AND BERRY RAW MATERIALS

    by Igor' Bakin, Anna Mustafina, Albert Nugmanov

    The aim of the study is to investigate the rehydration processes of sublimated fruit and berry raw materials when determining their sorption capacity with respect to free and bound moisture. To study the ability of raw materials to be restored after drying, it is necessary to study the sorption capacity and determine the types of moisture absorbed during rehydration. For popular market dried items (avocado (Persēa americana), garden strawberry (Fragaria ananassa Duch. variety Pegasus), apricot (Prunus armeniaca, variety Vodolay)) experiments were conducted on their sublimation dehydration and the conditions and parameters of restoration were determined. Drying was carried out in a Vikumer BFD-10 freeze dryer in stages: lyophilization of samples to a temperature of 45 °C, at a pressure in the working chamber of 200 Pa, heating the contact surface of the shelves to 20 °C; then, over the course of three hours, the pressure in the working chamber was reduced to 100 Pa under the same parameters; At the final stage, the shelf surface temperature was increased to 25 °C while maintaining the pressure in the working chamber no higher than 75 Pa (abs.) for 8 hours. The ability to restore lyophilized raw materials was studied experimentally by quantitatively assessing the sorption capacity depending on the temperature in the range from 5 to 80 °C for 10 minutes. An original approach to determining the sorption capacity of raw materials is proposed, estimated by a modified rehydration efficiency coefficient, which shows how much free moisture the product can absorb. The rehydration efficiency index is nonlinear, the highest coefficient was obtained for strawberries – 86.15 % at a temperature of 5 °C, for apricots – (79.59 ± 94) % at 45 °C, for avocados – (66.42 ± 80) % at 80 °C. The obtained empirical data and recommendations can be used in confectionery industry enterprises and by end consumers of freeze-dried raw materials.

  • Product cost analysis and marketing of yogurt with dry tomato powder

    by Anna S. Mustafina, Igor A. Bakin, Anna V. Korchuganova

    Yogurt is a popular fermented dairy product due to its wide assortment and proven benefits for human health. The aim of the study is to substantiate the cost-effectiveness of expanding the range of yogurt by adding vegetable filler. It was obtained that the cost of enriching additive in the form of dried tomato powder amounted to 9% in the structure of material costs. The share of fixed (34%) and variable (66%) costs in the structure of the total cost of the new product was determined. The market price of yogurt with dried tomato powder is accepted 135 rubles per kg for the consumer market of Yurga, Kemerovo region. It is shown that the production process is stable, with a margin of financial strength of 77%, with the profitability of production of 52.17%. On the basis of marketing research of consumer preferences it was found that 26% of respondents trust the local manufacturer of yogurt. Product buyers (58%) prefer “live yogurt” with a shelf life of up to 5 days. The main criteria for choosing yogurt are taste - 65%, composition - 61%, useful qualities - 57%, price - 41%. A less significant factor in purchasing is the brand (5%). The analysis of questionnaire data showed the interest of 77% of respondents to the new enriched product with flavor filler in the form of dry tomato powder. The conducted research shows the prospects of production of enriched yogurt with vegetable fillers in conditions of growing demand for functional products enriched with additional nutrients, useful for the health of consumers.

  • Open Access

    Optimizing quinoa seed drying modes in a drum dryer with a channel nozzle

    by S. V. Rodnishchev, D. V. Dmitriev, I. A. Bakin, S. V. Shakhov, I. A. Glotova, A. S. Muravyev

    The article presents the results of experimental studies of primary technological processes for processing quinoa seeds of domestic selection on a pilot drying unit. The purpose of the study is to identify rational values of the parameters of the post-harvest seed drying process in a continuous drum dryer. The object of the study was the process of convective drying of quinoa seeds of domestic selection of NPO "KVINOA CENTER", Novokubansk, Krasnodar Territory, variety Kadi, harvest of 2024. The experiment was carried out on a pilot unit of a drum dryer with channel nozzles for transverse feeding of the drying agent. The influence of the main process parameters (temperature and flow rate of the heat carrier, productivity for wet material) on the process was studied. Drying optimization was carried out based on the condition of minimizing specific energy consumption when reaching the moisture content of quinoa seeds up to 8.0–8.5% at the outlet of the dryer. The multicriterial optimization problem was solved using the three-factor design of the Box-Wilson experiment. The dispersion analysis was carried out using the ANOVA method. The response surface methodology was used to analyze and visualize the experimental data. Finding the region of optimal values was carried out using the Harrington desirability function. Rational intervals of input factor values were established from the analysis of the array of solutions: heat carrier temperature at the inlet to the drum 323-325 deg. K; heat carrier flow rate 0.312-0.316 m3/s; productivity for wet seeds 1583.8-1586.12 kg/h. The use of these modes of moisture removal from quinoa seeds ensures the minimization of energy costs for the process drying at the required storage parameters.


  • Open Access

    Research on Technological Methods for Extracting Inulin from Common Chicory Roots (Cichorium Intybus L.)

    by Альберт Хамед-Харисович Нугманов, Игорь Алексеевич Бакин, Анна Сабирдзяновна Мустафина, Полина Николаевна Шаповалова

    Исследование технологических методов экстракции инулина из корней обыкновенного цикория (Cichorium intybus L.)


  • BEE PRODUCTS MACRO- AND MICROCOMPONENT COMPOSITION ANALYSIS

    by Igor Bakin, Andrey Sukhikh, Andrey Lyubimov, Anna Mustafina, Olga Chaplygina

    The purpose of research is to study the macro- and microcomponent composition of the plant part of Angelica officinalis (Angelica archangelica L.) and samples of bee products of monofloral honey collected by bees from this plant in order to predict the functional properties of bee products. Tasks: to analyze samples for the content of macro- and microelements; to evaluate the quantitative content of mineral elements in the plant part of Angelica officinalis and bee products; to analyze the influence of the mineral composition of bee products on the physiological and pharmacological potential of the human body; to explore the botanical origin of honey. The object of the study is the aerial part (inflorescences) of Angelica officinalis and samples of monofloral honey collected in the black taiga zone of Kuznetsk Alatau during the first half of July 2022. Honey samples were examined for the frequency of occurrence of pollen grains of melliferous plants according to the requirements of the GOST 31769-2012 standard, on the basis of which the botanical origin was determined by the method of melissopalynological analysis. Determination of the component mineral composition of honey samples was carried out by inductively coupled plasma atomic emission spectrometry on an ISP-AES 9820 spectrometer (Shimadzu, Japan). Analysis of the content of elements in samples was carried out according to the calibration dependence of standard solutions of element ions. Quantitative analysis of the content of elements was carried out using multi-element standard samples (ICP multi-element standard solution IV Merck). Correspondence of the botanical origin of honey from the plant Angelica archangelica L. was established. Of the 23 elements identified in the inflorescences of the plant, 17 elements were found in bee products. The content of elements of phosphorus (340 mcg/kg), tin (110) and indium (380 mcg/kg) in honey was determined. The high accumulation of the potassium macroelement up to 3800 µg/kg in honey with the content up to 5700 µg/kg in the plant part is associated with an increased content of elements in the soils of Western Siberia. The degree of satisfaction of the daily requirement for the mineral components of angelica honey was calculated. Bee products can be considered as a natural source of mineral components.


  • Open Access

    Prospects for increasing the efficiency of extraction processes of carotenoids from by-products of processing biological raw materials

    by Astrakhan State Technical University, O. I. Konnova, Z. M. Arabova, I. Yu. Aleksanyan, A. H.-Kh. Nugmanov, Russian State Agrarian University — Timiryazev Agricultural Academy, I. A. Bakin, A. S. Mustafina, И. Ю. Алексанян

    Carotenoids have a wide range of health benefits: they strengthen the immune system and wound healing process, and protect against the harmful effects of ultraviolet radiation. They are used in the food and cosmetics industries, animal feed and pharmaceuticals. Therefore, extracting biologically active substances from fish processing by-products can significantly reduce food waste. This article describes methods for extracting carotenoids from by-products of processing particulate fish species.


  • Open Access

    Информационные системы контроля и управления процессов дегидратации плодово-ягодного сырья

    by Игорь Алексеевич Бакин, Сергей Викторович Шилов, Анна Сабирдзяновна Мустафина

    Введение. Производственный процесс выработки конечной продукции пищевой промышленности требует соблюдения регламентированных параметров обработки сырья. Контроль определяющих параметров технологии позволяет обеспечить требования качества и безопасности. Повышение эффективности и конкурентоспособности предприятия достигаются внедрением систем управления производством и цифровыми технологиями. Для снижения доли ручного сбора данных и автоматизированного управления технологическим циклом предложено использовать цифровые системы управления и мониторинга оборудования. Принимая во внимание, что качество переработки плодово-ягодного сырья напрямую связано с операциями термической обработки, необходимо обеспечить контроль и управление процессами на этих этапах.Цель. Цель исследования - разработка концепции и обеспечение автоматизированной системы управления вакуумной дегидратации плодово-ягодного сырья, с реализацией алгоритмов управления в среде SIMATIC PCS7, с использованием программируемых логических контроллеров Siemens Simatic.Материалы и методы. Объект исследования – система управления и автоматизации для вакуумной дегидратации плодов и ягод, имеющих твердый каркас и капиллярно-пористую структуру, с начальной влажностью до 90%. В качестве методов исследования и реализации методологии управления информационной системы процессов дегидратации использована среда разработки Simatic WinCC. Исследования проводились на оригинальной конструкции сушильной установки. Определение эффективного коэффициента диффузии влаги и константы скорости сушки реализовывалось численными методами решением модели Аррениуса для неизотермических условий.Результаты. Результатом анализа стал алгоритм изменения параметров технологического процесса дегидратации. Предложено для ускорения процессов обезвоживания применить пониженное давление в первые периоды сушки и последующий кондуктивный энергоподвод. Определены три цикла управления. Вначале осуществляется кондуктивный нагрев до 60 °С при атмосферном давлении. Далее камера сушилки вакуумируется до давления 0,5 кПа и до 0,2 кПа. Установлена длительность предварительного прогрева для ягодного сырья – до 10 минут, второго цикла сушки – до 15 минут при температуре 35°С. Продолжительность третьего цикла 20 минут, при температуре точки насыщения 22 °С. Сформулированы задачи управления процессами с использованием программируемых логических контроллеров Siemens Simatic. Описаны каналы управления и параметры регулирования для обеспечения сохранности биоактивных компонентов сырья.Выводы. В среде проектирования Simatic WinCC реализованы модули с функциями: прием и передача значений параметров процесса сушки; визуальный контроль; конфигурирование и настройка параметров; принудительное изменение параметров; просмотр информации о регистрируемых в технологической системе событиях. Разработана система визуализации сушильного процесса. Реализованы операторские интерфейсы на панели управления Simatic HMI.


  • Operation of Membrane Apparatus with Polarization Layer Removal Using Artificial Neural Networks

    by Anton Shafray, Ekaterina Sazonova, Dmitry Borodulin, Boris Lobasenko, Igor Bakin