KFKenji Furukawa

Kenji Furukawa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kenji Furukawa has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Innovative treatment system for digester liquor using anammox process

    by Kenji Furukawa, Yasuhiko Inatomi, Sen Qiao, Lai Quan, Taichi Yamamoto, Kazuichi Isaka, Tatsuo Sumino


  • Bench-scale study using PVA gel as a biocarrier in a UASB reactor treating corn steep liquor wastewater

    by W. Zhang, K. Furukawa, J.D. Rouse

    PVA-gel beads were used as a biocarrier for treatment of corn steep liquor wastewater containing high levels of volatile fatty acids (VFA), where retention of biomass could be either solely in the porous microstructure of the gel or by granule formation using a gel bead as a nucleus. With stable COD removal efficiencies of 90% or greater, continuous treatment was demonstrated over a four month period, with organic loading rates being increased stepwise from 2.5 to 22.5 kg COD/m3 d. In addition, VFA in the effluent were, with few exceptions maintained close to zero. Gas production increased over the course of the study and reached a level of 0.38 m3/kg COD consisting of 65% methane with the remainder being mostly carbon dioxide. Biomass granules containing methane producing bacteria progressively formed around the PVA-gel beads during the study. In contrast, very few small natural granules developed apart from PVA-gel nuclei indicating that PVA gel may serve well as a seeding material to enhance granulation when natural occurrence is lacking.


  • Development of single-stage nitrogen removal using anammox and partial nitritation (SNAP) and its treatment performances

    by K. Furukawa, P.K. Lieu, H. Tokitoh, T. Fujii

    Single-stage Nitrogen removal using Anammox and Partial nitritation (SNAP) process was newly developed as an economical nitrogen removal process for ammonium rich wastewaters. The experimental studies for the evaluation of SNAP process were carried out using a novel biofilm reactor, in which hydrophilic net-type acryl fiber biomass carrier was applied. This SNAP reactor was operated under operational conditions of pH 7.5–7.7, 35 °C and DO 2–3 mg/L, and 60 to 80% of influent NH4-N was removed under loading rate of 0.48 kg-N/m3/d. Through the DNA analysis of the attached sludge, it was made clear that ammonium oxidizing bacteria (AOB) and anammox bacteria coexisted in the attach-immobilized sludge on the acryl fiber biomass carrier. Favorable conditions for the growth of anammox bacteria were created inside attach-immobilized nitrifying sludge. Two kinds of anammox bacteria and two kinds of AOB were detected in the SNAP sludge. Existence ratios of anammox and AOB were estimated to be 15% and 8.7%, respectively, based on the obtained clone numbers. This coexisting condition was confirmed by the FISH image of SNAP sludge and its confocal laser scanning microscope.


  • Granulation of Anammox microorganisms in up-flow reactors

    by U. Imajo, T. Tokutomi, K. Furukawa

    Experimental studies were performed to evaluate the feasibility of granulation of Anammox microorganisms for biomass retention in up-flow reactors. Two experimental studies, one using a 6.4-L lab-scale reactor with synthetic medium and the other using a 200-L pilot-scale reactor with half-nitrified reject water from a sludge digester were conducted. To enhance the granulation process, seed granules from a UASB reactor were added to both experimental reactors. Granulation of Anammox microorganisms was observed using both the synthetic medium and the reject water. The core of a large proportion of Anammox granules retained part of the original seed biomass. The Anammox granules had a slightly lower density than the seed granules from the UASB process, but the size and other physical properties were comparable. The successful granulation of the Anammox microorganisms led to a stable nitrogen removal performance. The maximum nitrogen removal rate of the lab-scale reactor was observed to be 2.9 kg/(m3·d) after 173 days of operation and that of the pilot-scale reactor was 6.4 kg/(m3·d) after 12 months of operation.