Vignesh Manohar
Research Subjects
Vignesh Manohar has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Yahya Rahmat-Samii
University of California, Los Angeles, Los Angeles, CA, USA
7 shared publications - John L. Volakis
Florida International University
3 shared publications - Satheesh Bojja Venkatakrishnan
Department of Electrical and Computer Engineering, Florida International University, Miami, FL, USA
3 shared publications - Alexander Dale Johnson
Department of Electrical and Computer Engineering College of Engineering and Computing Florida International University Miami FL 33174 USA
2 shared publications - Joshua M. Kovitz
Advanced Concepts Laboratory, Georgia Tech Research Institute 2 , Atlanta, Georgia 30332
2 shared publications - Junbo Wang
University of California, Los Angeles, Los Angeles, CA, USA
2 shared publications
Latest Publications
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 566-581
New and Emerging Directions in the Fields of Antennas and Propagation
In this invited paper, the New Technology Directions Committee (NTDC) of the IEEE Antennas and Propagation Society (AP-S) presents new and emerging research directions to commemorate the 70th anniversary of the IEEE Transactions on Antennas and Propagation . The NTDC consists of three Working Groups (WGs); members and collaborators of these groups provide their perspectives on topics related to WG themes in this paper. WG-1 focuses on advancement of materials and manufacturing processes for future antenna applications. WG-2 focuses on advances in communications, sensing and imaging. WG-3 focuses on maximizing the societal impact of wireless connectivity. The discussion in this paper ranges from additive manufacturing techniques and system integration to advanced communications and quantum-based sensing technologies. Numerous applications are explored and a perspective on the digital divide is offered.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 566-581
New and Emerging Directions in the Fields of Antennas and Propagation
In this invited paper, the New Technology Directions Committee (NTDC) of the IEEE Antennas and Propagation Society (AP-S) presents new and emerging research directions to commemorate the 70th anniversary of the IEEE Transactions on Antennas and Propagation . The NTDC consists of three Working Groups (WGs); members and collaborators of these groups provide their perspectives on topics related to WG themes in this paper. WG-1 focuses on advancement of materials and manufacturing processes for future antenna applications. WG-2 focuses on advances in communications, sensing and imaging. WG-3 focuses on maximizing the societal impact of wireless connectivity. The discussion in this paper ranges from additive manufacturing techniques and system integration to advanced communications and quantum-based sensing technologies. Numerous applications are explored and a perspective on the digital divide is offered.
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (3) , 1828-1833
On the Resolution of Near-Field Focused Arrays
A key design metric for near field focused antennas is its resolution, which is the spatial extent over which the fields decay by 3 dB. While the resolution for far-field focused antennas is widely appreciated, a detailed understanding of the resolution of near-field focused antennas has not been presented. A unique requirement of near-field focused antennas is the requirement to characterize both transverse and axial resolution. We begin by revisiting the classical scalar Fresnel-Kirchhoffs diffraction integral and the assumptions involved in obtaining a closed form solution of the integral. These closed form solutions are then analyzed in depth to reveal the dependency of the resolution on the array size, focal length and the frequency (wavelength) of operation. These observations are validated via a representative phased array consisting of infinitesimal dipoles and superposing their individual vector near-fields. This simulation model serves as the basis to assess the domain of applicability of the closed form solutions, and reveals insightful dependencies of the near-field resolution on the geometry and frequency. This model is further employed to study the impact of geometry and focal-spot scanning on the resolution of near-field focused antennas.
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (3) , 1828-1833
On the Resolution of Near-Field Focused Arrays
A key design metric for near field focused antennas is its resolution, which is the spatial extent over which the fields decay by 3 dB. While the resolution for far-field focused antennas is widely appreciated, a detailed understanding of the resolution of near-field focused antennas has not been presented. A unique requirement of near-field focused antennas is the requirement to characterize both transverse and axial resolution. We begin by revisiting the classical scalar Fresnel-Kirchhoffs diffraction integral and the assumptions involved in obtaining a closed form solution of the integral. These closed form solutions are then analyzed in depth to reveal the dependency of the resolution on the array size, focal length and the frequency (wavelength) of operation. These observations are validated via a representative phased array consisting of infinitesimal dipoles and superposing their individual vector near-fields. This simulation model serves as the basis to assess the domain of applicability of the closed form solutions, and reveals insightful dependencies of the near-field resolution on the geometry and frequency. This model is further employed to study the impact of geometry and focal-spot scanning on the resolution of near-field focused antennas.
- 28 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (8) , 6703-6717
K-Band Circularly Polarized Beam Steerable Reflectarray Enabling Internet of Space: Conceptualization and Validation
Low-cost and lightweight CubeSats have opened new possibilities to realize Internet of Space (IoS), a vision that aims to provide global network access, particularly for remote areas. A key challenge for IoS realization is the development of an antenna that can meet the gain, bandwidth, and polarization requirements for IoS while complying with the small form factor of CubeSats. The challenge is further magnified by the need to dynamically reconfigure the antenna’s beam location to maintain connectivity as the satellite orbits. This work addresses these challenges by proposing a beam steerable reflectarray antenna that can potentially be integrated with CubeSats to enable IoS. A novel reflectarray unit cell containing multiple Archimedean spiral arms is designed to support broadband circularly polarized (CP) operation, and its operational principle is discussed in depth. The unit cell provides four states of phase shift that are electronically switchable, allowing the reflectarray to achieve the required aperture phase for the desired beam scan. Representative reflectarray prototypes are designed, fabricated, and measured. CP beam scan up to 60° in the plane of offset across the targeted frequency band of 17.8–20.2 GHz is achieved.
- 28 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (8) , 6703-6717
K-Band Circularly Polarized Beam Steerable Reflectarray Enabling Internet of Space: Conceptualization and Validation
Low-cost and lightweight CubeSats have opened new possibilities to realize Internet of Space (IoS), a vision that aims to provide global network access, particularly for remote areas. A key challenge for IoS realization is the development of an antenna that can meet the gain, bandwidth, and polarization requirements for IoS while complying with the small form factor of CubeSats. The challenge is further magnified by the need to dynamically reconfigure the antenna’s beam location to maintain connectivity as the satellite orbits. This work addresses these challenges by proposing a beam steerable reflectarray antenna that can potentially be integrated with CubeSats to enable IoS. A novel reflectarray unit cell containing multiple Archimedean spiral arms is designed to support broadband circularly polarized (CP) operation, and its operational principle is discussed in depth. The unit cell provides four states of phase shift that are electronically switchable, allowing the reflectarray to achieve the required aperture phase for the desired beam scan. Representative reflectarray prototypes are designed, fabricated, and measured. CP beam scan up to 60° in the plane of offset across the targeted frequency band of 17.8–20.2 GHz is achieved.
- Open Access
- 26 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 2, 702-708
VHF/UHF Ultrawideband Tightly Coupled Dipole Array for CubeSats
To date, CubeSat radars and imagers have been limited to operations beyond S-band due to the challenges associated with the design of wideband, compact, low-frequency antennas. Concurrently, the frequencies at VHF/UHF bands can image through clouds and foliage, and are very attractive for ice, water and biomass sensing. There is thus a need to develop wideband antennas that can operate at VHF/UHF bands which are low cost, light-weight, and packable. In this paper, we present a CubeSat deployable Tightly Coupled Dipole Array (TCDA) that achieves VSWR<; 3 from 80 MHz - 600 MHz, and VSWR<; 4 from 65 MHz - 600 MHz. While the array itself is 1.2 m in length, 10 cm in width and 1.5 mm in thickness, it can be folded and stowed in a compact volume of 0.40U. We detail the design of the array, demonstrate the folding mechanism, and validate its performance through measurements.
- 26 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 2, 702-708
Open AccessVHF/UHF Ultrawideband Tightly Coupled Dipole Array for CubeSats
To date, CubeSat radars and imagers have been limited to operations beyond S-band due to the challenges associated with the design of wideband, compact, low-frequency antennas. Concurrently, the frequencies at VHF/UHF bands can image through clouds and foliage, and are very attractive for ice, water and biomass sensing. There is thus a need to develop wideband antennas that can operate at VHF/UHF bands which are low cost, light-weight, and packable. In this paper, we present a CubeSat deployable Tightly Coupled Dipole Array (TCDA) that achieves VSWR<; 3 from 80 MHz - 600 MHz, and VSWR<; 4 from 65 MHz - 600 MHz. While the array itself is 1.2 m in length, 10 cm in width and 1.5 mm in thickness, it can be folded and stowed in a compact volume of 0.40U. We detail the design of the array, demonstrate the folding mechanism, and validate its performance through measurements.
- Open Access
- 19 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 2, 464-472
Optimized Differential TCDA (D-TCDA) With Novel Differential Feed Structure
Modern phased arrays require large instantaneous bandwidths, wide fields of view, and low profiles to conduct multiple functions. Many of these phased arrays rely on emerging high speed ADCs and advanced balanced transceivers. The benefits of balanced front-ends include improved linearity, dynamic range, isolation, and noise resilience. The application of a differential phased array in such a system removes extraneous losses caused by baluns, though the issue of feed-borne E-plane scan resonances must be considered. We address the E-plane scan resonance issue through an improved Balanced Wideband Impedance Transformer (BWIT) feed for the ultra-wideband (UWB) Tightly Coupled Dipole Array (TCDA). This BWIT feed has already demonstrated mitigated common-modes over a 3:1 bandwidth ratio while scanning to low angles. Here, our differential TCDA (D-TCDA) is developed for the L-C band (viz. 1.0 GHz to 6.1 GHz) with emphasis on resonance-free wide-angle scanning. Rigorous EM model and circuit analysis is included to verify the BWIT performance. Under a VSWR <; 3 definition, the improved array achieves a 6:1 impedance bandwidth ratio (BWR) with resonance-free scanning in all planes. An exception is the H-plane scanning at 60° where the VSWR <; 4. Array simulations are verified with measurements for an 8×8 single-polarized prototype.
- 19 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 2, 464-472
Open AccessOptimized Differential TCDA (D-TCDA) With Novel Differential Feed Structure
Modern phased arrays require large instantaneous bandwidths, wide fields of view, and low profiles to conduct multiple functions. Many of these phased arrays rely on emerging high speed ADCs and advanced balanced transceivers. The benefits of balanced front-ends include improved linearity, dynamic range, isolation, and noise resilience. The application of a differential phased array in such a system removes extraneous losses caused by baluns, though the issue of feed-borne E-plane scan resonances must be considered. We address the E-plane scan resonance issue through an improved Balanced Wideband Impedance Transformer (BWIT) feed for the ultra-wideband (UWB) Tightly Coupled Dipole Array (TCDA). This BWIT feed has already demonstrated mitigated common-modes over a 3:1 bandwidth ratio while scanning to low angles. Here, our differential TCDA (D-TCDA) is developed for the L-C band (viz. 1.0 GHz to 6.1 GHz) with emphasis on resonance-free wide-angle scanning. Rigorous EM model and circuit analysis is included to verify the BWIT performance. Under a VSWR <; 3 definition, the improved array achieves a 6:1 impedance bandwidth ratio (BWR) with resonance-free scanning in all planes. An exception is the H-plane scanning at 60° where the VSWR <; 4. Array simulations are verified with measurements for an 8×8 single-polarized prototype.
- 24 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (8) , 5078-5083
Understanding the Radiation Characteristics of Metal-Only, Low-Profile, Offset Stepped Parabolic Reflector Antennas: Simulation, Analysis, and Measurement
Antennas capable of providing high gains while occupying minimal volume can facilitate several technologies such as 5G, CubeSats and automotive radars. This work designs, analyzes, and measures a low-profile, metal-only offset stepped parabolic reflector antenna. The reflector aperture consists of a discrete number of parabolic sections that reflect the incident electromagnetic fields with a modulo 2π phase shift resulting in a collimated far-field beam. The technique can efficiently result in profile heights of the order of one wavelength making it very desirable for mmWave applications. The reflector can be fabricated using CNC machining as well as 3D printing. As a representative prototype, an offset stepped reflector with an aperture diameter of 20 cm, F/D of 0.5 and profile height of 0.79 cm at 19 GHz is analyzed, built and measured. The periodicity of the surface results in a high sidelobe envelope which is analyzed, numerically modeled and verified through measurements. Guidelines on how to remedy the high sidelobe envelope are provided and the associated tradeoffs are highlighted. Further, the stepped reflector geometry introduces a scan in the main beam as the frequency deviates from the center frequency. This phenomenon is also verified through measurements and explained through analytical formulations.
- 24 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (8) , 5078-5083
Understanding the Radiation Characteristics of Metal-Only, Low-Profile, Offset Stepped Parabolic Reflector Antennas: Simulation, Analysis, and Measurement
Antennas capable of providing high gains while occupying minimal volume can facilitate several technologies such as 5G, CubeSats and automotive radars. This work designs, analyzes, and measures a low-profile, metal-only offset stepped parabolic reflector antenna. The reflector aperture consists of a discrete number of parabolic sections that reflect the incident electromagnetic fields with a modulo 2π phase shift resulting in a collimated far-field beam. The technique can efficiently result in profile heights of the order of one wavelength making it very desirable for mmWave applications. The reflector can be fabricated using CNC machining as well as 3D printing. As a representative prototype, an offset stepped reflector with an aperture diameter of 20 cm, F/D of 0.5 and profile height of 0.79 cm at 19 GHz is analyzed, built and measured. The periodicity of the surface results in a high sidelobe envelope which is analyzed, numerically modeled and verified through measurements. Guidelines on how to remedy the high sidelobe envelope are provided and the associated tradeoffs are highlighted. Further, the stepped reflector geometry introduces a scan in the main beam as the frequency deviates from the center frequency. This phenomenon is also verified through measurements and explained through analytical formulations.
- Open Access
- 27 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 1, 598-603
Low-Cost S-Band Reconfigurable Monopole/Patch Antenna for CubeSats
The development of reconfigurable antennas compatible with a CubeSat form factor can aid several space missions. Often, satellite missions require multiple wireless links with the same radio, but the design of such antennas is challenging due to the mechanical constraints and the limited power aboard a CubeSat. In this paper, we present a unique reconfigurable antenna concept enabled by adhesive polyimide tapes. The presented antenna can switch from a conventional patch to a monopole-like antenna with minimal actuation complexity. This reconfiguration provides choices for polarization, pattern, and gain without use of active components for size, cost and power consumption reductions. The frequency of operation is S-band (2.4 GHz), and the antenna achieves S11<-10 for both reconfiguration states. Measurements compare well with simulations in both states.
- 27 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 1, 598-603
Open AccessLow-Cost S-Band Reconfigurable Monopole/Patch Antenna for CubeSats
The development of reconfigurable antennas compatible with a CubeSat form factor can aid several space missions. Often, satellite missions require multiple wireless links with the same radio, but the design of such antennas is challenging due to the mechanical constraints and the limited power aboard a CubeSat. In this paper, we present a unique reconfigurable antenna concept enabled by adhesive polyimide tapes. The presented antenna can switch from a conventional patch to a monopole-like antenna with minimal actuation complexity. This reconfiguration provides choices for polarization, pattern, and gain without use of active components for size, cost and power consumption reductions. The frequency of operation is S-band (2.4 GHz), and the antenna achieves S11<-10 for both reconfiguration states. Measurements compare well with simulations in both states.
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 63 (6) , 14-28
Enabling the Internet of Things With CubeSats: A review of representative beamsteerable antenna concepts
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 63 (6) , 14-28
Enabling the Internet of Things With CubeSats: A review of representative beamsteerable antenna concepts
- 6 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (8) , 5723-5728
Revisiting the Appearance of Grating Lobes for Antennas With Circular Periodicity
This work aims to provide an insight into the appearance of grating lobes when the geometry of an antenna exhibits circular periodicity. Examples of such antennas can be uniform circular arrays or rib-deployable umbrella reflectors. The array factor for a single-ring uniform circular array is first analyzed in depth to estimate the location of the grating lobes in elevation and azimuth directions. Further, simple analytical expressions are derived to estimate the level of the grating lobes that occur nearest to the main beam. We also extend these formulations to predict the behavior of grating lobes when the array elements are arranged in the form of concentric rings, which is more suitable for modeling apertures of antenna that possess circular periodicity.
- 6 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (8) , 5723-5728
Revisiting the Appearance of Grating Lobes for Antennas With Circular Periodicity
This work aims to provide an insight into the appearance of grating lobes when the geometry of an antenna exhibits circular periodicity. Examples of such antennas can be uniform circular arrays or rib-deployable umbrella reflectors. The array factor for a single-ring uniform circular array is first analyzed in depth to estimate the location of the grating lobes in elevation and azimuth directions. Further, simple analytical expressions are derived to estimate the level of the grating lobes that occur nearest to the main beam. We also extend these formulations to predict the behavior of grating lobes when the array elements are arranged in the form of concentric rings, which is more suitable for modeling apertures of antenna that possess circular periodicity.
- 2 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (6) , 2788-2798
Synthesis and Analysis of Low Profile, Metal-Only Stepped Parabolic Reflector Antenna
This paper describes an intuitive approach for synthesizing metal-only, low-profile, high-gain stepped reflector antennas that can aid emerging technologies in the areas of communications and remote sensing. The required reflector aperture is synthesized using a family of confocal parabolic sections, each of which scatters in phase to provide a focused beam in the far field. The parabolic sections provide a distinct advantage over the conventional Fresnel zone plate (FZP) antenna, since the radiation is inherently unidirectional. Furthermore, the metal-only structure avoids the need for dielectric characterization, which is essential for reflectarrays. Using this technique, it is possible to achieve depths of the order of one wavelength while ensuring high efficiencies. Starting from a symmetric stepped reflector synthesis, two distinct approaches to synthesize offset stepped reflectors are explored in this paper. We highlight several interesting tradeoffs between electromagnetic performance and mechanical complexity that arise for each of these approaches. A thorough analysis of the frequency performance of stepped parabolic reflectors is also presented. Comprehensive simulations using both physical optics and multilevel fast multipole method validate our theoretical predictions. The formulations presented in this paper are especially relevant at mmWave frequencies and beyond, which has attracted significant interest for modern technologies.
- 2 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (6) , 2788-2798
Synthesis and Analysis of Low Profile, Metal-Only Stepped Parabolic Reflector Antenna
This paper describes an intuitive approach for synthesizing metal-only, low-profile, high-gain stepped reflector antennas that can aid emerging technologies in the areas of communications and remote sensing. The required reflector aperture is synthesized using a family of confocal parabolic sections, each of which scatters in phase to provide a focused beam in the far field. The parabolic sections provide a distinct advantage over the conventional Fresnel zone plate (FZP) antenna, since the radiation is inherently unidirectional. Furthermore, the metal-only structure avoids the need for dielectric characterization, which is essential for reflectarrays. Using this technique, it is possible to achieve depths of the order of one wavelength while ensuring high efficiencies. Starting from a symmetric stepped reflector synthesis, two distinct approaches to synthesize offset stepped reflectors are explored in this paper. We highlight several interesting tradeoffs between electromagnetic performance and mechanical complexity that arise for each of these approaches. A thorough analysis of the frequency performance of stepped parabolic reflectors is also presented. Comprehensive simulations using both physical optics and multilevel fast multipole method validate our theoretical predictions. The formulations presented in this paper are especially relevant at mmWave frequencies and beyond, which has attracted significant interest for modern technologies.