Junbo Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Junbo Wang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Yahya Rahmat-Samii
University of California, Los Angeles, Los Angeles, CA, USA
7 shared publications - Vignesh Manohar
Delart Technologies Corporation, Mississauga, ON, Canada
2 shared publications - Anastasios Papathanasopoulos
Department of Electrical and Computer Engineering, University of California at Los Angeles, Los Angeles, CA, USA
1 shared publication Gregg Freebury
Tendeg, LLC, Louisville, CO, USA
1 shared publicationJeremy Zamora
Tendeg, LLC, Louisville, CO, USA
1 shared publication- Richard E. Hodges
Jet Propulsion Laboratory (JPL), California Institute of Technology, Pasadena, CA, USA
1 shared publication
Latest Publications
- 27 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 66 (3) , 52-67
The Evolution of Printed Lens and Transmitarray Antennas: Navigating representative past, present, and future designs and manufacturing techniques
The IEEE Society’s 140th anniversary and the IEEE Antennas and Propagation Society’s 75th anniversary mark significant milestones in their enduring academic and industrial contributions. Notably, there is a discernible rise in demand for high-performance antennas, continually challenging the boundaries of manufacturing techniques. Innovations in manufacturing act as catalysts, propelling researchers and engineers to explore unconventional design paradigms and push modern antenna performance limits. The evolution of printed lens and transmitarray antenna technologies exemplifies collaborative out-of-the-box developments at the intersection of antenna design and manufacturing methods. In this invited review article, we delineate key advancements in lens and transmitarray antenna manufacturing technologies and their consequential impact on antenna design methodologies. Commencing with foundational techniques, such as milling and injection molding, advancing through printed circuit board (PCB) processes, and culminating in the cutting-edge capabilities of 3D printing, this article reviews the chronological progression that significantly enhances the design possibilities and functionality of lens and transmitarray antennas. Ample representative references are provided to facilitate further exploration of research conducted by other researchers.
- 27 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 66 (3) , 52-67
The Evolution of Printed Lens and Transmitarray Antennas: Navigating representative past, present, and future designs and manufacturing techniques
The IEEE Society’s 140th anniversary and the IEEE Antennas and Propagation Society’s 75th anniversary mark significant milestones in their enduring academic and industrial contributions. Notably, there is a discernible rise in demand for high-performance antennas, continually challenging the boundaries of manufacturing techniques. Innovations in manufacturing act as catalysts, propelling researchers and engineers to explore unconventional design paradigms and push modern antenna performance limits. The evolution of printed lens and transmitarray antenna technologies exemplifies collaborative out-of-the-box developments at the intersection of antenna design and manufacturing methods. In this invited review article, we delineate key advancements in lens and transmitarray antenna manufacturing technologies and their consequential impact on antenna design methodologies. Commencing with foundational techniques, such as milling and injection molding, advancing through printed circuit board (PCB) processes, and culminating in the cutting-edge capabilities of 3D printing, this article reviews the chronological progression that significantly enhances the design possibilities and functionality of lens and transmitarray antennas. Ample representative references are provided to facilitate further exploration of research conducted by other researchers.
- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (2) , 1893-1898
New Cosine-q Pattern Formulas for the Analysis of Elongated-Aperture Antennas
The cosine-q radiation pattern formulas allow one to create sidelobe-free patterns with easily controlled beamwidth and taper. These advantages make the cosine-q pattern an ideal feed source in the studies of reflector, transmit-/reflect-array, and lens antennas. However, in this paper, it is shown that the original cosine-q formulas are limited to rotationally symmetric patterns and lose their effectiveness when an elliptical pattern (or fan-beam) with highly unequal beamwidths in two principle cuts are desired. This limits the application of cosine-q sources in antennas with elongated apertures, which are of great interest in radar sensing and CubeSat applications. This paper proposes a set of new formulas that enable the use of cosine-q-type illumination for elongated aperture antennas. The model is further improved by adding a phase function that accounts for the interleaved phase center locations, which can appear in practical feed sources. The effectiveness of the new cosine-q formulas is demonstrated through analyzing two representative antennas: a C-Band linearly-polarized 7 m×1.5 m aperture reflector antenna and a K-band circularly-polarized 20 cm×10 cm reflectarray antenna.
- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (2) , 1893-1898
New Cosine-q Pattern Formulas for the Analysis of Elongated-Aperture Antennas
The cosine-q radiation pattern formulas allow one to create sidelobe-free patterns with easily controlled beamwidth and taper. These advantages make the cosine-q pattern an ideal feed source in the studies of reflector, transmit-/reflect-array, and lens antennas. However, in this paper, it is shown that the original cosine-q formulas are limited to rotationally symmetric patterns and lose their effectiveness when an elliptical pattern (or fan-beam) with highly unequal beamwidths in two principle cuts are desired. This limits the application of cosine-q sources in antennas with elongated apertures, which are of great interest in radar sensing and CubeSat applications. This paper proposes a set of new formulas that enable the use of cosine-q-type illumination for elongated aperture antennas. The model is further improved by adding a phase function that accounts for the interleaved phase center locations, which can appear in practical feed sources. The effectiveness of the new cosine-q formulas is demonstrated through analyzing two representative antennas: a C-Band linearly-polarized 7 m×1.5 m aperture reflector antenna and a K-band circularly-polarized 20 cm×10 cm reflectarray antenna.
- 9 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (8) , 6378-6389
A 7 m × 1.5 m Aperture Parabolic Cylinder Deployable Mesh Reflector Antenna for Next-Generation Satellite Synthetic Aperture Radar
A high priority next-generation satellite remote sensing mission necessitates a lightweight deployable antenna that can fit in the package of low-Earth orbit small satellites. In this work, we present the development of a 7 m×1.5 m aperture C-Band parabolic cylinder mesh reflector along with a 1×32 element linear patch array feed. The detailed and tailored mechanical design, full-wave analysis, and measurements of the reflector are elaborated. The reflector is constructed with a mesh surface with unique deployment mechanisms for weight reduction and stowage. The linear microstrip patch array feed is designed with a lightweight honeycomb substrate and is used for the breadboard testing of the parabolic cylinder reflector. The antenna achieved the desired surface accuracy and a measured gain of 42.06 dBi at 5.357 GHz, with half-power beamwidths of 0.52° and 2.35° in the two principal planes.
- 9 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (8) , 6378-6389
A 7 m × 1.5 m Aperture Parabolic Cylinder Deployable Mesh Reflector Antenna for Next-Generation Satellite Synthetic Aperture Radar
A high priority next-generation satellite remote sensing mission necessitates a lightweight deployable antenna that can fit in the package of low-Earth orbit small satellites. In this work, we present the development of a 7 m×1.5 m aperture C-Band parabolic cylinder mesh reflector along with a 1×32 element linear patch array feed. The detailed and tailored mechanical design, full-wave analysis, and measurements of the reflector are elaborated. The reflector is constructed with a mesh surface with unique deployment mechanisms for weight reduction and stowage. The linear microstrip patch array feed is designed with a lightweight honeycomb substrate and is used for the breadboard testing of the parabolic cylinder reflector. The antenna achieved the desired surface accuracy and a measured gain of 42.06 dBi at 5.357 GHz, with half-power beamwidths of 0.52° and 2.35° in the two principal planes.
- 24 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (8) , 1917-1921
Development of a Low-Cost Lightweight Advanced K-Band Horn Antenna With Charge-Programmed Deposition 3-D Printing
We present the first development of a lightweight, monolithic, circularly polarized (CP) K-band horn antenna developed using a novel charge-programmed deposition (CPD) manufacturing process. The horn has a polymer body with metalized interior surface. The CPD process creates complex geometries with programmed charged surfaces via three-dimensional (3D) printing and allows the deposition of metallics anywhere within the 3D layout. Intricate internal structures of the horn, such as the meandered waveguide transition and the septum polarizer, were successfully constructed. Measured patterns of the horn demonstrated great agreement with simulations, with an axial ratio below 2.5 dB in the range of 17.5 - 20.5 GHz. The total weight of the horn is only 11 g, marking a significant weight reduction of around 80% compared to traditionally fabricated horns of similar size and operating frequency. The low-cost and lightweight horn antennas enabled by this process can significantly benefit mass- and cost-sensitive applications such as small satellite and CubeSat missions.
- 24 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (8) , 1917-1921
Development of a Low-Cost Lightweight Advanced K-Band Horn Antenna With Charge-Programmed Deposition 3-D Printing
We present the first development of a lightweight, monolithic, circularly polarized (CP) K-band horn antenna developed using a novel charge-programmed deposition (CPD) manufacturing process. The horn has a polymer body with metalized interior surface. The CPD process creates complex geometries with programmed charged surfaces via three-dimensional (3D) printing and allows the deposition of metallics anywhere within the 3D layout. Intricate internal structures of the horn, such as the meandered waveguide transition and the septum polarizer, were successfully constructed. Measured patterns of the horn demonstrated great agreement with simulations, with an axial ratio below 2.5 dB in the range of 17.5 - 20.5 GHz. The total weight of the horn is only 11 g, marking a significant weight reduction of around 80% compared to traditionally fabricated horns of similar size and operating frequency. The low-cost and lightweight horn antennas enabled by this process can significantly benefit mass- and cost-sensitive applications such as small satellite and CubeSat missions.
- 13 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (11) , 2288-2292
A Simplified Configuration of Beam-Steerable Risley Prism Antennas: Principles and Validation
Beam steerable Risley prism antennas (RPA) typically require at least three separated components, including a stationary feed source and two independently rotatable gradient phase shift surfaces. In this paper, we propose a simplified, two-component RPA configuration that employs a gradient-phase feed source and a gradient-phase transmitarray. The proposed configuration is validated by a novel circularly polarized (CP) RPA in K-band through simulations. It consists of an$8\times 8$ gradient-phase CP patch array feed and a 10-cm diameter CP transmitarray. The total height of this system is 14.6 mm, which is less than one wavelength at 19 GHz. LHCP beam-scan from broadside to$55^\circ$ is demonstrated. The simulated RPA achieved a broadside directivity of 22.3 dBi at 19 GHz (42.7% aperture efficiency), and a 3-dB directivity bandwidth of 9.2%.- 13 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (11) , 2288-2292
A Simplified Configuration of Beam-Steerable Risley Prism Antennas: Principles and Validation
Beam steerable Risley prism antennas (RPA) typically require at least three separated components, including a stationary feed source and two independently rotatable gradient phase shift surfaces. In this paper, we propose a simplified, two-component RPA configuration that employs a gradient-phase feed source and a gradient-phase transmitarray. The proposed configuration is validated by a novel circularly polarized (CP) RPA in K-band through simulations. It consists of an$8\times 8$ gradient-phase CP patch array feed and a 10-cm diameter CP transmitarray. The total height of this system is 14.6 mm, which is less than one wavelength at 19 GHz. LHCP beam-scan from broadside to$55^\circ$ is demonstrated. The simulated RPA achieved a broadside directivity of 22.3 dBi at 19 GHz (42.7% aperture efficiency), and a 3-dB directivity bandwidth of 9.2%.- 28 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (8) , 6703-6717
K-Band Circularly Polarized Beam Steerable Reflectarray Enabling Internet of Space: Conceptualization and Validation
Low-cost and lightweight CubeSats have opened new possibilities to realize Internet of Space (IoS), a vision that aims to provide global network access, particularly for remote areas. A key challenge for IoS realization is the development of an antenna that can meet the gain, bandwidth, and polarization requirements for IoS while complying with the small form factor of CubeSats. The challenge is further magnified by the need to dynamically reconfigure the antenna’s beam location to maintain connectivity as the satellite orbits. This work addresses these challenges by proposing a beam steerable reflectarray antenna that can potentially be integrated with CubeSats to enable IoS. A novel reflectarray unit cell containing multiple Archimedean spiral arms is designed to support broadband circularly polarized (CP) operation, and its operational principle is discussed in depth. The unit cell provides four states of phase shift that are electronically switchable, allowing the reflectarray to achieve the required aperture phase for the desired beam scan. Representative reflectarray prototypes are designed, fabricated, and measured. CP beam scan up to 60° in the plane of offset across the targeted frequency band of 17.8–20.2 GHz is achieved.
- 28 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (8) , 6703-6717
K-Band Circularly Polarized Beam Steerable Reflectarray Enabling Internet of Space: Conceptualization and Validation
Low-cost and lightweight CubeSats have opened new possibilities to realize Internet of Space (IoS), a vision that aims to provide global network access, particularly for remote areas. A key challenge for IoS realization is the development of an antenna that can meet the gain, bandwidth, and polarization requirements for IoS while complying with the small form factor of CubeSats. The challenge is further magnified by the need to dynamically reconfigure the antenna’s beam location to maintain connectivity as the satellite orbits. This work addresses these challenges by proposing a beam steerable reflectarray antenna that can potentially be integrated with CubeSats to enable IoS. A novel reflectarray unit cell containing multiple Archimedean spiral arms is designed to support broadband circularly polarized (CP) operation, and its operational principle is discussed in depth. The unit cell provides four states of phase shift that are electronically switchable, allowing the reflectarray to achieve the required aperture phase for the desired beam scan. Representative reflectarray prototypes are designed, fabricated, and measured. CP beam scan up to 60° in the plane of offset across the targeted frequency band of 17.8–20.2 GHz is achieved.
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 63 (6) , 14-28
Enabling the Internet of Things With CubeSats: A review of representative beamsteerable antenna concepts
- 19 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 63 (6) , 14-28
Enabling the Internet of Things With CubeSats: A review of representative beamsteerable antenna concepts
- Open Access
- 1 January 2019
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research B
- Vol. 85, 27-48
STEP-LIKE STRUCTURES IN ELECTROSTATIC AND ELECTRODYNAMIC IMPLEMENTATION OF METHOD OF MOMENTS: SOME UNIQUE OBSERVATIONS
Step-like perfect electric conductor (PEC) structures are studied in both electrostatic and electrodynamic cases implementing Method of Moments. The canonical geometries included in these step-like structures such as edges, wedges and corners as well as the unique charge and current behaviors are characterized and discussed. Both 2D and 3D electrostatic problems are studied. In 2D electrostatic problem, a constant is introduced to the traditional 2D Green's function which effectively adjusts the zero potential reference embedded in the Green's function. This modification alleviates the contradiction between 2D and 3D definitions of electrostatic quantities and avoids unrealistic charge solutions obtained by Method of Moments. In 2D electrodynamic problem, the occasional appearance of singular surface current near the step's right angle bends is observed, discussed and then linked with the analytical solution of a canonical wedge scattering problem. Physical Optics approximation is also utilized as a comparison to Method of Moments in solving the 2D scattering problems.
- 1 January 2019
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research B
- Vol. 85, 27-48
Open AccessSTEP-LIKE STRUCTURES IN ELECTROSTATIC AND ELECTRODYNAMIC IMPLEMENTATION OF METHOD OF MOMENTS: SOME UNIQUE OBSERVATIONS
Step-like perfect electric conductor (PEC) structures are studied in both electrostatic and electrodynamic cases implementing Method of Moments. The canonical geometries included in these step-like structures such as edges, wedges and corners as well as the unique charge and current behaviors are characterized and discussed. Both 2D and 3D electrostatic problems are studied. In 2D electrostatic problem, a constant is introduced to the traditional 2D Green's function which effectively adjusts the zero potential reference embedded in the Green's function. This modification alleviates the contradiction between 2D and 3D definitions of electrostatic quantities and avoids unrealistic charge solutions obtained by Method of Moments. In 2D electrodynamic problem, the occasional appearance of singular surface current near the step's right angle bends is observed, discussed and then linked with the analytical solution of a canonical wedge scattering problem. Physical Optics approximation is also utilized as a comparison to Method of Moments in solving the 2D scattering problems.