MAM.V. Andrushko

M.V. Andrushko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M.V. Andrushko has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • SYNCHRONIZATION OF INFORMATION AND MEASUREMENT SYSTEMS DURING THE DETERMINATION OF BLAST WAVE IMPACT ON ARMORED VEHICLES

    by Ye. Huzii, P. Arkushenko, М. Andrushko, A. Sadaiev, O. Kuzmich

    The resistance of armored vehicles to the effects of a blast wave is one of the key aspects for protecting the crews of armored combat vehicles. The blast wave resulting from the detonation of mine-explosive devices has a powerful destructive effect on armored vehicles, causing both instant damage to the hull and long-term structural deformations. The study of the mechanisms of interaction of the blast wave with armored surfaces is of great importance for improving the design of armored combat vehicles, developing passive and active protection systems, as well as increasing the survivability of the crew. One of the main problems is the insufficient integration and synchronization of measurement results (shock overloads, excess pressure of the shock wave and shock acceleration, video recordings from high-speed video cameras), which limits the possibility of conducting a comprehensive analysis of the behavior of armored vehicles during an explosion. At the same time, the problem of synchronizing the received video recordings from high-speed video cameras with measuring systems (complexes) has not been fully considered. The article investigates the improvement of the process of testing armored vehicles for mine resistance by integrating high-speed video cameras, measuring complexes and software into a single measurement system through data synchronization and analysis of the obtained results. The use of the claimed technologies allows: thanks to the synchronization of video recordings with sensor data, it is possible to accurately determine how different parts of armored vehicles react to explosive loads, as well as to assess the level of damage and deformations; the ADAQ system will allow recording and synchronizing data from pressure, temperature, and shock load sensors, which, in combination with video recordings, provides a holistic view of the behavior of the equipment during testing; the use of specialized data processing programs allows not only to visualize damage to the equipment, but also to conduct a detailed structural and dynamic analysis of its behavior under explosion conditions. The results obtained make it possible to identify weaknesses in the design of armored vehicles and ensure their improvement to increase mine resistance, which has a direct impact on the protection of the crew and the effectiveness of performing assigned combat missions.

  • Open Access

    JUSTICATION OF THE REGUIRED NUMBER OF COMPONENTS OF THE INFORMATION AND MEASURING SYSTEM FOR COLLCTING AND PROCESSING INFORMATION ON THE IMPACT OF EXPLOSION FACTORS ON PERSONNEL IN A PROTECTIVE STRUCTURE

    by O Kuzmich, M Andrushko, P Arkushenko, Y Rieznikov

    Ensuring the safety and protection of the population in Ukraine, objects of the national economy, and national wealth of the country from the negative consequences of a full-scale war should be considered as an integral part of the state policy of national security. The stability of the functioning of a protective structure is understood as its ability to reliably protect personnel and the population in emergency situations and perform all its functions. It should be noted that currently there are no national technical regulations (substantiated technical recommendations) for the selection of information and measuring equipment for conducting tests to assess the impact of explosion factors on personnel and the population in a protective structure. At the same time, there is an acute problem and a significant need to assess the impact of explosion factors on the preservation of the lives of personnel and the population in protective structures of various functional purposes. The research is aimed at substantiating the selection criteria and the required number of components of the information and measuring system for collecting and processing information on the impact of explosion factors on personnel and the population in a protective structure. To determine the degree of protection, IBS with a set of appropriate sensors and software for processing and analyzing the obtained characteristics are used. The main striking factor of the explosion, if we do not take into account small striking elements (fragments), is the air shock wave, which spreads from the center of the explosion in all directions. The criterion for the resistance of protective structures to the influence of the air shock wave is the maximum value of the excess pressure at which the protective structures and equipment are preserved or receive slight destruction (damage). To obtain a substantiated assessment, it is necessary to measure the pressure of the blast wave from the outside and inside the protective structure. This task is solved using sensors (primary converters), signal amplifiers and measuring and recording equipment. The team of authors proposed a rational structural scheme of IBS for use in tests to verify the characteristics of protective structures and assess the factors of the explosion's impact on personnel and the population inside such a structure.


  • Open Access

    ANALYSIS OF SPECIAL SOFTWARE FOR PROCESSING FLIGHT INFORMATION. FEATURES AND DEVELOPMENT PROSPECTS

    by M Andrushko, V Kuznetsov, Y Huzii, A Sadaiev

    The dominant directions in the modernization of the electronic equipment of the aircraft of the Armed Forces of Ukraine are the creation of new principles for the use of means of destruction, the organization and interaction of various communication, navigation and surveillance systems, the use of multifunctional integrated on-board equipment in view of the current realities of large-scale Russian aggression against Ukraine. Among the entire list of new equipment, the means of collecting and registering various parametric, digital, speech and video information with the corresponding ground-based processing complexes based on a PC stand out. The further rapid development of computer technologies, the application of modern technical and software developments and their implementation in the process of processing flight information made it possible to obtain more visual and informative processing results. The features of testing and further implementation of ground-based complexes for processing, control and analysis of flight information arise depending on the purpose of the specialized software being created. Special software, depending on the tasks, is intended to function both as part of the corresponding model of AWM, and independently on the basis of a PC, or together (as part of) with other software. This article examines the analysis of special software for processing flight information, its features and prospects for its development. The Air Force of the Armed Forces of Ukraine uses several software and hardware complexes for processing and analyzing flight information that are related in their properties. They are characterized by the presence of special software for processing and analysis. The most common of them are the special software “Panorama”, “Berkut” and “MONSTER”. The special software “LUCH” and “Spektrum”, which is claimed on the software market, are characteristic of the current stage of AWM development. Optimization and standardization of application software used in ground-based flight information processing devices will allow to increase the quality, convenience and improve the time indicators between flight control.


  • Open Access

    METHODOLOGY FOR ASSESSING THE ACOUSTIC DETECTABILITY OF GROUND ROBOTIC COMPLEXES DURING TESTING

    by Y. Rieznikov, П.л. Аркушенко, O. Rieznikova, М.в. Андрушко, Ю.в. Рєзніков, О.г. Рєзнікова

    The article addresses the challenges of evaluating the acoustic detectability of ground robotic complexes (GRC) in military applications. Existing national and international standards (DSTU GOST 23941:2004, ISO 3744) are analyzed, revealing their limitations in addressing dynamic operational conditions, spectral noise composition, and military-specific requirements. A novel methodology is proposed, integrating real-environment measurements, spectral analysis, detection range assessment, and signal- to-noise ratio (SNR) evaluation. Key parameters such as noise intensity, frequency distribution, and directional characteristics are emphasized to optimize GRC stealth. The methodology aligns with NATO standards (MIL-STD-1474E) and introduces a comprehensive approach to acoustic signature reduction. The study highlights that traditional noise measurement methods, designed for stationary or civilian machinery, fail to account for GRC-specific factors like variable speed, terrain interactions, and combined noise sources (e.g., engines, cooling systems). Spectral analysis is prioritized to distinguish low-frequency noises (propagating over long distances) from high- frequency components (absorbed by the environment). The proposed framework includes noise visualization tools and AI-driven data integration for predictive detection modeling. Experimental validation is suggested through field tests under diverse conditions (urban, forested, uneven terrain). The article underscores the importance of minimizing structural and aerodynamic noise through design modifications, such as vibration dampening and stealth materials. Compliance with Level 1 and Level 2 acoustic detectability thresholds (as per NATO) is critical for ensuring GRC survivability in combat scenarios. The research concludes that the proposed methodology enhances GRC operational effectiveness by reducing auditory detection risks. Future work should focus on real-time noise masking algorithms and cross-platform adaptability. This study provides actionable insights for defense engineers and certification bodies, contributing to the advancement of military robotics in modern warfare.

  • Open Access

    PECULIARITIES OF THE USE OF THE THERMOGRAPHIC SYSTEM VARIO CAM HD RESEARCH 980, A COMPONENT OF THE MEASURING SYSTEM BASED ON THE ANALYSIS OF THE АМЕ TESTS

    by М.в. Андрушко, П.л. Аркушенко, O. Kuzmich, A. Sadaiev, О.є. Кузьміч, А.ю. Садаєв

    One of the main tasks in the field of increasing the state's defense capability is to focus on creating highly effective combat- ready Armed Forces of Ukraine, ensuring the priority of their qualitative characteristics and achieving capabilities in accordance with NATO standards. Depending on the test tasks, the specialists involved in conducting research face the question of analyzing the need to involve appropriate testing equipment, which primarily depends on the sufficiency of obtaining the results of providing characteristics and parameters for evaluating the prototype of the AME. During tests, research (experiments), there is an urgent need to measure (register) and obtain information about the parameters of the level of thermal infrared visibility and determine its level. Having analyzed modern methods of measuring temperatures and temperature characteristics, it is possible to draw a conclusion regarding the choice of the optimal method for determining thermal visibility for conducting tests when determining IR visibility. Since materials emit infrared radiation at different speeds, determining the absolute temperature of an object requires significant knowledge of the theory of infrared radiation of materials, as well as the influence of the geometry of the object, the angle of measurement and environmental conditions. However, it should be noted that the existing modern and effective methods for determining the characteristics of the thermal visibility of MET are thermographic methods. They can be used for monitoring during the manufacture and modernization of military equipment and its components and detecting failures during operation. This article reviews and describes the application of thermographic methods to detect defects for various materials and their combinations, making effective decisions based on the results of MET testing. Analysis of the results obtained from the use of thermographic systems indicates the possibility of providing more detailed control over systems and components during the manufacture and modernization of military equipment of different purposes, which will allow detecting defective parts at the early stages of their development or during further operation and minimizes the time spent searching for a malfunction in the system.

  • Open Access

    ОСОБЛИВОСТІ РОЗРОБКИ МОБІЛЬНИХ ДОДАТКІВ ДЛЯ ОПЕРАЦІЙНОЇ СИСТЕМИ ANDROID

    by Олексій Коломійцев, Володимир Чуприна, Андрій Пашнєв, Володимир Комаров, Альберт Катунін, Микола Андрушко, Тетяна Телевна, Михайло Бєлоус, Артем Андрушко, Крістіна Шутько

    В статті розкрито особливості розробки мобільного додатку (МД) для операційної системи Android. Описано основні інструменти та технології, які необхідно використовувати для створення таких МД. Перевагу надано: мові програмування Kotlin, яка є простотою та ефективністю, а також базі даних Postgres – розміщену на хмарній платформі Supabase, яка забезпечує надійне зберігання та доступ до даних. XML забезпечує розмітку інтерфейсу, а використання Jetpack Navigation – управління навігацією між екранами.

  • Open Access

    JUSTIFICATION OF A STANDARD METHOD FOR TESTING ARMORED VEHICLE PRODUCTS TO ASSESS THE LEVEL OF PROTECTION AGAINST MINE THREATS USING MODERN INFORMATION- MEASUREMENT SYSTEMS

    by М.в. Андрушко, П.л. Аркушенко, О. Kuzmich, Yе. Huzii, О. Florin, О.є. Кузьміч, Є.о. Гузій, О.п. Флорін

    Recent changes in regulatory documents and the adoption of NATO standards have necessitated a transition in the testing process to the testing and certification schemes accepted in NATO countries, particularly in the general approaches to conducting tests. Timely determination of the level of mine protection, aimed at eliminating vulnerabilities and developing more effective technical solutions, is of great importance during the creation and operation of armored vehicles. In addition, it is essential to rationally choose measurement, recording, and indication tools within information-measurement systems and to further process the obtained results in automated data collection and processing systems for use in testing serial (modernized) samples of military equipment. Given the increasing directions of enemy offensives and the use of anti-personnel and anti-tank mines, ensuring a high level of equipment protection has become a priority task for military units. Neglecting this can lead to personnel losses, reduced combat effectiveness of units, and increased resources needed to restore damaged equipment. Therefore, an effective and reliable assessment of the level of mine protection is a crucial criterion for developing and improving competitive protective systems that, above all, ensure the operator of armored vehicles can carry out their mission. The issue of testing armored vehicles to assess the level of protection against mine threats has become highly relevant during the large-scale aggression by russia. Assessing the danger to the crew resulting from an explosion under a combat vehicle is a complex task that depends on many interrelated factors. The ability to conduct measurements during an explosion is an extremely important issue for protecting the crew in armored vehicles and specialized transport vehicles. Such measurements require the use of modern information-measurement systems. The methodology, modern information-measurement systems, and the obtained results can serve as a fundamental check of the factors that determine the level of danger to the crew. In the article, the authors examine changes in the testing process based on new approaches according to regulatory documents and substantiate the methodological apparatus for testing armored vehicle products to assess the level of protection against mine threats in special period conditions, using modern information-measurement systems and taking into account changes in the technology of conducting these tests.


  • Open Access

    SUBSTANTIATION OF METHODOLOGICAL RECOMMENDATIONS FOR THE USE OF INFORMATION AND MEASURING SYSTEM BUILT ON THE LATEST HARDWARE DEVELOPMENTS DURING THE TESTING OF AME

    by М Andrushko, P Arkushenko, V Kuznetsov, О Kuzmich

    The constant process of development of both hardware and software perfection inevitably leads to the improvement (creation) of existing (new) advanced information and measurement systems. At the same time, there is a need to develop methodological recommendations for the use of advanced information gathering and processing systems built on the basis of the latest hardware systems and complexes and software products for conducting heterogeneous tests. At the same time, there is a need to develop methodological recommendations for the use of a promising IMS for collecting and processing information built on the basis of the latest hardware systems and complexes and software products for conducting heterogeneous tests. Modern systems used for testing AME are measuring complexes that include modules for connecting sensors, modules for converting analogue sensor signals into digital form, modules for storing the received information in digital form and modules for communication with external computerised devices. Depending on the tasks of the test or experiment, the IMS can be supplemented (simplified) by the need to use certain measuring complexes and systems to measure parameters and obtain reliable information. The ideas, principles and algorithms that currently constitute the methodology of information processing have already made it possible to make a significant breakthrough in information processing technology. Processing methods and principles of their implementation for each field have their own specific features, which are primarily determined by the specific type of information carrier, encoding methods and ways of presenting the results of information processing. As a result, information processing arrangements for different areas often appear to be outwardly dissimilar. However, this external dissimilarity hides the same methodology and principles of building processing systems, which is crucial. The authors of the article study the capabilities of the latest hardware systems and complexes which should be included in advanced IMS and substantiate new methodological approaches, in accordance with regulatory and legal documents, to the use of such IMS during testing of AME.


  • Open Access

    ANALYSIS OF THE POSSIBILITY OF USING AN AUTONOMOUS MEASUREMENT SYSTEM AND REGISTRATION OF THE ASSESSMENT OF THE LEVEL OF PROTECTION OF THE ARMOURED VEHICLE CREW

    by О Kuzmich, P Arkushenko, М Andrushko, A Sadaiev

    In the context of large-scale armed aggression by the Russian Federation and growing losses from mine injuries, there is a significant need to obtain objective information about the level of protection provided by military armoured vehicles. At the same time, Ukrainian defence enterprises are constantly working to develop the latest methods to improve the protection of vehicle crews from the threat of mines and explosives. There is an acute problem and an essential need to quickly improve the mine resistance of standard models of armoured vehicles and, as a result, the need to quickly determine the effectiveness of the measures taken and make engineering decisions. The basis for the development of modern mine protection equipment should be to identify the impact of the shock wave not only on the vehicle structure, but primarily on the crew members. It is possible to evaluate the results, conduct comprehensive research and provide reasonable recommendations for further work only on the basis of the results of tests (experimental physical modelling) during which physical factors affecting the crew are measured. It is impossible to carry out the necessary measurements without the use of modern sensors (sensors) in conjunction with an information and measurement system that will ensure the reception, processing and registration of information. The main criteria for selecting sensors are sensitivity, resolution, linearity, frequency response, temperature response, noise level and long-term stability.


  • Open Access

    ANALYSIS OF VIDEO RECORDING EQUIPMENT, USED ON AIRCRAFT AND ROUTES REDUCING THE SCOPE OF TESTING IN A SPECIAL PERIOD

    by Ye. Tertyshnik, О.і. Потапов, А.м. Андрушко, М.в. Андрушко, O. Filippenkov, Є.м. Тертишнік, О.в. Філіппенков

    The article examines general information about photo-video registration, analyzes the means of video registration used on aircraft (hereinafter aircraft) of the state aviation of Ukraine, substantiates the ways and consequences of reducing the amount of tests in the conditions of a special period. The research was carried out using the methods of the theory of system analysis, synthesis of organizational and technical systems, comparison, and generalization. The purpose of the article was to study ways to increase the efficiency of tests of aircraft video registration devices in the conditions of a special period. To achieve the goal, the following was done: consideration of general information about video recording, video signal characteristics and types of video recorders; analysis of the main parameters of video cameras; types, methods and techniques of shooting; analysis of video recording devices used on PS and modern small-sized video recording devices; the consequences (risks) and pitfalls of reducing the volume of tests are considered. The results of the analysis should be taken into account when justifying ways to reduce the amount of tests in the conditions of a special period.