Pavlo Arkushenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pavlo Arkushenko has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- M.V. Andrushko
State Scientific Research Institute of Armament and Military Equipment Testing and Certification, Cherkasy, Ukraine
12 shared publications - Oleksandr Kuzmich
Державний науково-дослідний інститут випробувань і сертифікації озброєння та військової техніки, Черкаси, Україна
10 shared publications - Andrii Sadaiev6 shared publications
- Ye. Huzii4 shared publications
- S. Ratushny3 shared publications
- A. Verveiko2 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3(29),p. 86-94
FACTORS OF FORMATION OF EXCESSIVE PRESSURE IN PROTECTIVE STRUCTURES AND REQUIREMENTS FOR ITS MEASUREMENT SYSTEMS IN EXPLOSIVE LOADING CONDITIONS
The article presents a comprehensive study of physical mechanisms of formation of excessive pressure during the action of a blast wave on protective structures in conditions of open, semi-closed and enclosed space. Based on a systems approach, a classification of factors influencing the parameters of the shock wave, divided into external (explosion characteristics, propagation conditions, distance, reflection, atmospheric factors) and internal (volume geometry, tightness, presence of holes, internal reflections and resonance phenomena) ones, is carried out. It is shown that complex wave processes are formed in closed and semi-closed volumes, in particular multiple reflections, wave superimposition and energy focusing, which leads to a significant increase in peak values of excessive pressure and load momentum compared to the conditions of an open environment. It is substantiated that traditional calculation models based on free-field assumptions do not provide sufficient accuracy for assessing loads in real conditions of operation of protective structures, especially in conditions of modern war, where the nature of the use of ammunition and the configuration of the environment differ significantly from regulatory scenarios. The critical role of internal excessive pressure, which can exceed the external one due to resonance phenomena and geometric focusing of waves, is established. Based on the analysis of modern research and the regulatory framework (in particular, DSTU 9329:2025), the requirements for measuring systems for determining the parameters of the blast wave on protective structures are determined. Key technical characteristics of measuring systems are formulated. A functional-target approach to modeling the processes of blast wave formation and the structure of the information and measurement system is proposed, which allows integrating experimental data, numerical modeling and machine learning methods to increase the reliability of blast load assessment. The results obtained create a scientific and methodological basis for improving approaches to the design, testing, and modernization of protective structures, taking into account real conditions of combat use of weapons.
- 30 September 2026
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3(29),p. 86-94
Open AccessFACTORS OF FORMATION OF EXCESSIVE PRESSURE IN PROTECTIVE STRUCTURES AND REQUIREMENTS FOR ITS MEASUREMENT SYSTEMS IN EXPLOSIVE LOADING CONDITIONS
The article presents a comprehensive study of physical mechanisms of formation of excessive pressure during the action of a blast wave on protective structures in conditions of open, semi-closed and enclosed space. Based on a systems approach, a classification of factors influencing the parameters of the shock wave, divided into external (explosion characteristics, propagation conditions, distance, reflection, atmospheric factors) and internal (volume geometry, tightness, presence of holes, internal reflections and resonance phenomena) ones, is carried out. It is shown that complex wave processes are formed in closed and semi-closed volumes, in particular multiple reflections, wave superimposition and energy focusing, which leads to a significant increase in peak values of excessive pressure and load momentum compared to the conditions of an open environment. It is substantiated that traditional calculation models based on free-field assumptions do not provide sufficient accuracy for assessing loads in real conditions of operation of protective structures, especially in conditions of modern war, where the nature of the use of ammunition and the configuration of the environment differ significantly from regulatory scenarios. The critical role of internal excessive pressure, which can exceed the external one due to resonance phenomena and geometric focusing of waves, is established. Based on the analysis of modern research and the regulatory framework (in particular, DSTU 9329:2025), the requirements for measuring systems for determining the parameters of the blast wave on protective structures are determined. Key technical characteristics of measuring systems are formulated. A functional-target approach to modeling the processes of blast wave formation and the structure of the information and measurement system is proposed, which allows integrating experimental data, numerical modeling and machine learning methods to increase the reliability of blast load assessment. The results obtained create a scientific and methodological basis for improving approaches to the design, testing, and modernization of protective structures, taking into account real conditions of combat use of weapons.
- 31 March 2026
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 1(27),p. 106-111
HARDWARE AND SOFTWARE SOLUTIONS FOR INFORMATION AND MEASUREMENT SYSTEMS DURING ARMORED VEHICLE TESTS
The paper presents an analysis of modern hardware and software solutions aimed at increasing the reliability and safety of information and measurement systems used during tests of armored vehicles on the action of a blast wave. The research focuses on the integration and use of Catman AP, DewesoftX, MATLink and I-SPEED Software Suite 2.0 software complexes for synchronous collection, processing and storage of data under conditions of high dynamic and electromagnetic action. The proposed system architecture ensures real-time data integrity and high-precision synchronization between measurement modules and high-speed video channels. The increase in the number of attacks and system hacking requires an increase in the level of protection, which can be successfully solved on the basis of cryptographic transformations. The use of such an approach will make the developed analysis and forecasting system more secure and efficient. To guarantee the confidentiality and authenticity of data, the paper proposes a cryptographic protection mechanism based on an improved method of group matrix transformation. This approach accelerates encryption and decryption processes, ensuring mathematical stability and resistance to cyber influences. The method combines group and non-group two-operand operations with modulo-two addition, which reduces computational complexity and increases the speed of cryptographic protection during real tests. The results of the study show that the integration of specialized software with advanced cryptographic methods significantly increases the efficiency of experimental data analysis, improves protection against unauthorized access and provides comprehensive monitoring of armored vehicle survivability parameters. The proposed solutions can be implemented in modern military and dual-purpose information and measurement systems, ensuring increased measurement accuracy, operational reliability and cybersecurity during field tests.
- 31 March 2026
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 1(27),p. 106-111
HARDWARE AND SOFTWARE SOLUTIONS FOR INFORMATION AND MEASUREMENT SYSTEMS DURING ARMORED VEHICLE TESTS
The paper presents an analysis of modern hardware and software solutions aimed at increasing the reliability and safety of information and measurement systems used during tests of armored vehicles on the action of a blast wave. The research focuses on the integration and use of Catman AP, DewesoftX, MATLink and I-SPEED Software Suite 2.0 software complexes for synchronous collection, processing and storage of data under conditions of high dynamic and electromagnetic action. The proposed system architecture ensures real-time data integrity and high-precision synchronization between measurement modules and high-speed video channels. The increase in the number of attacks and system hacking requires an increase in the level of protection, which can be successfully solved on the basis of cryptographic transformations. The use of such an approach will make the developed analysis and forecasting system more secure and efficient. To guarantee the confidentiality and authenticity of data, the paper proposes a cryptographic protection mechanism based on an improved method of group matrix transformation. This approach accelerates encryption and decryption processes, ensuring mathematical stability and resistance to cyber influences. The method combines group and non-group two-operand operations with modulo-two addition, which reduces computational complexity and increases the speed of cryptographic protection during real tests. The results of the study show that the integration of specialized software with advanced cryptographic methods significantly increases the efficiency of experimental data analysis, improves protection against unauthorized access and provides comprehensive monitoring of armored vehicle survivability parameters. The proposed solutions can be implemented in modern military and dual-purpose information and measurement systems, ensuring increased measurement accuracy, operational reliability and cybersecurity during field tests.
- 30 December 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 4(26),p. 14-20
SYNCHRONIZATION OF INFORMATION AND MEASUREMENT SYSTEMS DURING THE DETERMINATION OF BLAST WAVE IMPACT ON ARMORED VEHICLES
The resistance of armored vehicles to the effects of a blast wave is one of the key aspects for protecting the crews of armored combat vehicles. The blast wave resulting from the detonation of mine-explosive devices has a powerful destructive effect on armored vehicles, causing both instant damage to the hull and long-term structural deformations. The study of the mechanisms of interaction of the blast wave with armored surfaces is of great importance for improving the design of armored combat vehicles, developing passive and active protection systems, as well as increasing the survivability of the crew. One of the main problems is the insufficient integration and synchronization of measurement results (shock overloads, excess pressure of the shock wave and shock acceleration, video recordings from high-speed video cameras), which limits the possibility of conducting a comprehensive analysis of the behavior of armored vehicles during an explosion. At the same time, the problem of synchronizing the received video recordings from high-speed video cameras with measuring systems (complexes) has not been fully considered. The article investigates the improvement of the process of testing armored vehicles for mine resistance by integrating high-speed video cameras, measuring complexes and software into a single measurement system through data synchronization and analysis of the obtained results. The use of the claimed technologies allows: thanks to the synchronization of video recordings with sensor data, it is possible to accurately determine how different parts of armored vehicles react to explosive loads, as well as to assess the level of damage and deformations; the ADAQ system will allow recording and synchronizing data from pressure, temperature, and shock load sensors, which, in combination with video recordings, provides a holistic view of the behavior of the equipment during testing; the use of specialized data processing programs allows not only to visualize damage to the equipment, but also to conduct a detailed structural and dynamic analysis of its behavior under explosion conditions. The results obtained make it possible to identify weaknesses in the design of armored vehicles and ensure their improvement to increase mine resistance, which has a direct impact on the protection of the crew and the effectiveness of performing assigned combat missions.
- 30 December 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 4(26),p. 14-20
SYNCHRONIZATION OF INFORMATION AND MEASUREMENT SYSTEMS DURING THE DETERMINATION OF BLAST WAVE IMPACT ON ARMORED VEHICLES
The resistance of armored vehicles to the effects of a blast wave is one of the key aspects for protecting the crews of armored combat vehicles. The blast wave resulting from the detonation of mine-explosive devices has a powerful destructive effect on armored vehicles, causing both instant damage to the hull and long-term structural deformations. The study of the mechanisms of interaction of the blast wave with armored surfaces is of great importance for improving the design of armored combat vehicles, developing passive and active protection systems, as well as increasing the survivability of the crew. One of the main problems is the insufficient integration and synchronization of measurement results (shock overloads, excess pressure of the shock wave and shock acceleration, video recordings from high-speed video cameras), which limits the possibility of conducting a comprehensive analysis of the behavior of armored vehicles during an explosion. At the same time, the problem of synchronizing the received video recordings from high-speed video cameras with measuring systems (complexes) has not been fully considered. The article investigates the improvement of the process of testing armored vehicles for mine resistance by integrating high-speed video cameras, measuring complexes and software into a single measurement system through data synchronization and analysis of the obtained results. The use of the claimed technologies allows: thanks to the synchronization of video recordings with sensor data, it is possible to accurately determine how different parts of armored vehicles react to explosive loads, as well as to assess the level of damage and deformations; the ADAQ system will allow recording and synchronizing data from pressure, temperature, and shock load sensors, which, in combination with video recordings, provides a holistic view of the behavior of the equipment during testing; the use of specialized data processing programs allows not only to visualize damage to the equipment, but also to conduct a detailed structural and dynamic analysis of its behavior under explosion conditions. The results obtained make it possible to identify weaknesses in the design of armored vehicles and ensure their improvement to increase mine resistance, which has a direct impact on the protection of the crew and the effectiveness of performing assigned combat missions.
- Open Access
- 1 October 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3(25),p. 53-59
JUSTICATION OF THE REGUIRED NUMBER OF COMPONENTS OF THE INFORMATION AND MEASURING SYSTEM FOR COLLCTING AND PROCESSING INFORMATION ON THE IMPACT OF EXPLOSION FACTORS ON PERSONNEL IN A PROTECTIVE STRUCTURE
Ensuring the safety and protection of the population in Ukraine, objects of the national economy, and national wealth of the country from the negative consequences of a full-scale war should be considered as an integral part of the state policy of national security. The stability of the functioning of a protective structure is understood as its ability to reliably protect personnel and the population in emergency situations and perform all its functions. It should be noted that currently there are no national technical regulations (substantiated technical recommendations) for the selection of information and measuring equipment for conducting tests to assess the impact of explosion factors on personnel and the population in a protective structure. At the same time, there is an acute problem and a significant need to assess the impact of explosion factors on the preservation of the lives of personnel and the population in protective structures of various functional purposes. The research is aimed at substantiating the selection criteria and the required number of components of the information and measuring system for collecting and processing information on the impact of explosion factors on personnel and the population in a protective structure. To determine the degree of protection, IBS with a set of appropriate sensors and software for processing and analyzing the obtained characteristics are used. The main striking factor of the explosion, if we do not take into account small striking elements (fragments), is the air shock wave, which spreads from the center of the explosion in all directions. The criterion for the resistance of protective structures to the influence of the air shock wave is the maximum value of the excess pressure at which the protective structures and equipment are preserved or receive slight destruction (damage). To obtain a substantiated assessment, it is necessary to measure the pressure of the blast wave from the outside and inside the protective structure. This task is solved using sensors (primary converters), signal amplifiers and measuring and recording equipment. The team of authors proposed a rational structural scheme of IBS for use in tests to verify the characteristics of protective structures and assess the factors of the explosion's impact on personnel and the population inside such a structure.
- 1 October 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3(25),p. 53-59
Open AccessJUSTICATION OF THE REGUIRED NUMBER OF COMPONENTS OF THE INFORMATION AND MEASURING SYSTEM FOR COLLCTING AND PROCESSING INFORMATION ON THE IMPACT OF EXPLOSION FACTORS ON PERSONNEL IN A PROTECTIVE STRUCTURE
Ensuring the safety and protection of the population in Ukraine, objects of the national economy, and national wealth of the country from the negative consequences of a full-scale war should be considered as an integral part of the state policy of national security. The stability of the functioning of a protective structure is understood as its ability to reliably protect personnel and the population in emergency situations and perform all its functions. It should be noted that currently there are no national technical regulations (substantiated technical recommendations) for the selection of information and measuring equipment for conducting tests to assess the impact of explosion factors on personnel and the population in a protective structure. At the same time, there is an acute problem and a significant need to assess the impact of explosion factors on the preservation of the lives of personnel and the population in protective structures of various functional purposes. The research is aimed at substantiating the selection criteria and the required number of components of the information and measuring system for collecting and processing information on the impact of explosion factors on personnel and the population in a protective structure. To determine the degree of protection, IBS with a set of appropriate sensors and software for processing and analyzing the obtained characteristics are used. The main striking factor of the explosion, if we do not take into account small striking elements (fragments), is the air shock wave, which spreads from the center of the explosion in all directions. The criterion for the resistance of protective structures to the influence of the air shock wave is the maximum value of the excess pressure at which the protective structures and equipment are preserved or receive slight destruction (damage). To obtain a substantiated assessment, it is necessary to measure the pressure of the blast wave from the outside and inside the protective structure. This task is solved using sensors (primary converters), signal amplifiers and measuring and recording equipment. The team of authors proposed a rational structural scheme of IBS for use in tests to verify the characteristics of protective structures and assess the factors of the explosion's impact on personnel and the population inside such a structure.
- Open Access
- 30 June 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(8),p. 34-42
METHODOLOGY FOR ASSESSING THE ACOUSTIC DETECTABILITY OF GROUND ROBOTIC COMPLEXES DURING TESTING
The article addresses the challenges of evaluating the acoustic detectability of ground robotic complexes (GRC) in military applications. Existing national and international standards (DSTU GOST 23941:2004, ISO 3744) are analyzed, revealing their limitations in addressing dynamic operational conditions, spectral noise composition, and military-specific requirements. A novel methodology is proposed, integrating real-environment measurements, spectral analysis, detection range assessment, and signal- to-noise ratio (SNR) evaluation. Key parameters such as noise intensity, frequency distribution, and directional characteristics are emphasized to optimize GRC stealth. The methodology aligns with NATO standards (MIL-STD-1474E) and introduces a comprehensive approach to acoustic signature reduction. The study highlights that traditional noise measurement methods, designed for stationary or civilian machinery, fail to account for GRC-specific factors like variable speed, terrain interactions, and combined noise sources (e.g., engines, cooling systems). Spectral analysis is prioritized to distinguish low-frequency noises (propagating over long distances) from high- frequency components (absorbed by the environment). The proposed framework includes noise visualization tools and AI-driven data integration for predictive detection modeling. Experimental validation is suggested through field tests under diverse conditions (urban, forested, uneven terrain). The article underscores the importance of minimizing structural and aerodynamic noise through design modifications, such as vibration dampening and stealth materials. Compliance with Level 1 and Level 2 acoustic detectability thresholds (as per NATO) is critical for ensuring GRC survivability in combat scenarios. The research concludes that the proposed methodology enhances GRC operational effectiveness by reducing auditory detection risks. Future work should focus on real-time noise masking algorithms and cross-platform adaptability. This study provides actionable insights for defense engineers and certification bodies, contributing to the advancement of military robotics in modern warfare.
- 30 June 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(8),p. 34-42
Open AccessMETHODOLOGY FOR ASSESSING THE ACOUSTIC DETECTABILITY OF GROUND ROBOTIC COMPLEXES DURING TESTING
The article addresses the challenges of evaluating the acoustic detectability of ground robotic complexes (GRC) in military applications. Existing national and international standards (DSTU GOST 23941:2004, ISO 3744) are analyzed, revealing their limitations in addressing dynamic operational conditions, spectral noise composition, and military-specific requirements. A novel methodology is proposed, integrating real-environment measurements, spectral analysis, detection range assessment, and signal- to-noise ratio (SNR) evaluation. Key parameters such as noise intensity, frequency distribution, and directional characteristics are emphasized to optimize GRC stealth. The methodology aligns with NATO standards (MIL-STD-1474E) and introduces a comprehensive approach to acoustic signature reduction. The study highlights that traditional noise measurement methods, designed for stationary or civilian machinery, fail to account for GRC-specific factors like variable speed, terrain interactions, and combined noise sources (e.g., engines, cooling systems). Spectral analysis is prioritized to distinguish low-frequency noises (propagating over long distances) from high- frequency components (absorbed by the environment). The proposed framework includes noise visualization tools and AI-driven data integration for predictive detection modeling. Experimental validation is suggested through field tests under diverse conditions (urban, forested, uneven terrain). The article underscores the importance of minimizing structural and aerodynamic noise through design modifications, such as vibration dampening and stealth materials. Compliance with Level 1 and Level 2 acoustic detectability thresholds (as per NATO) is critical for ensuring GRC survivability in combat scenarios. The research concludes that the proposed methodology enhances GRC operational effectiveness by reducing auditory detection risks. Future work should focus on real-time noise masking algorithms and cross-platform adaptability. This study provides actionable insights for defense engineers and certification bodies, contributing to the advancement of military robotics in modern warfare.
- Open Access
- 9 April 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(7),p. 7-14
PECULIARITIES OF THE USE OF THE THERMOGRAPHIC SYSTEM VARIO CAM HD RESEARCH 980, A COMPONENT OF THE MEASURING SYSTEM BASED ON THE ANALYSIS OF THE АМЕ TESTS
One of the main tasks in the field of increasing the state's defense capability is to focus on creating highly effective combat- ready Armed Forces of Ukraine, ensuring the priority of their qualitative characteristics and achieving capabilities in accordance with NATO standards. Depending on the test tasks, the specialists involved in conducting research face the question of analyzing the need to involve appropriate testing equipment, which primarily depends on the sufficiency of obtaining the results of providing characteristics and parameters for evaluating the prototype of the AME. During tests, research (experiments), there is an urgent need to measure (register) and obtain information about the parameters of the level of thermal infrared visibility and determine its level. Having analyzed modern methods of measuring temperatures and temperature characteristics, it is possible to draw a conclusion regarding the choice of the optimal method for determining thermal visibility for conducting tests when determining IR visibility. Since materials emit infrared radiation at different speeds, determining the absolute temperature of an object requires significant knowledge of the theory of infrared radiation of materials, as well as the influence of the geometry of the object, the angle of measurement and environmental conditions. However, it should be noted that the existing modern and effective methods for determining the characteristics of the thermal visibility of MET are thermographic methods. They can be used for monitoring during the manufacture and modernization of military equipment and its components and detecting failures during operation. This article reviews and describes the application of thermographic methods to detect defects for various materials and their combinations, making effective decisions based on the results of MET testing. Analysis of the results obtained from the use of thermographic systems indicates the possibility of providing more detailed control over systems and components during the manufacture and modernization of military equipment of different purposes, which will allow detecting defective parts at the early stages of their development or during further operation and minimizes the time spent searching for a malfunction in the system.
- 9 April 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(7),p. 7-14
Open AccessPECULIARITIES OF THE USE OF THE THERMOGRAPHIC SYSTEM VARIO CAM HD RESEARCH 980, A COMPONENT OF THE MEASURING SYSTEM BASED ON THE ANALYSIS OF THE АМЕ TESTS
One of the main tasks in the field of increasing the state's defense capability is to focus on creating highly effective combat- ready Armed Forces of Ukraine, ensuring the priority of their qualitative characteristics and achieving capabilities in accordance with NATO standards. Depending on the test tasks, the specialists involved in conducting research face the question of analyzing the need to involve appropriate testing equipment, which primarily depends on the sufficiency of obtaining the results of providing characteristics and parameters for evaluating the prototype of the AME. During tests, research (experiments), there is an urgent need to measure (register) and obtain information about the parameters of the level of thermal infrared visibility and determine its level. Having analyzed modern methods of measuring temperatures and temperature characteristics, it is possible to draw a conclusion regarding the choice of the optimal method for determining thermal visibility for conducting tests when determining IR visibility. Since materials emit infrared radiation at different speeds, determining the absolute temperature of an object requires significant knowledge of the theory of infrared radiation of materials, as well as the influence of the geometry of the object, the angle of measurement and environmental conditions. However, it should be noted that the existing modern and effective methods for determining the characteristics of the thermal visibility of MET are thermographic methods. They can be used for monitoring during the manufacture and modernization of military equipment and its components and detecting failures during operation. This article reviews and describes the application of thermographic methods to detect defects for various materials and their combinations, making effective decisions based on the results of MET testing. Analysis of the results obtained from the use of thermographic systems indicates the possibility of providing more detailed control over systems and components during the manufacture and modernization of military equipment of different purposes, which will allow detecting defective parts at the early stages of their development or during further operation and minimizes the time spent searching for a malfunction in the system.
- Open Access
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 7-13
JUSTIFICATION OF A STANDARD METHOD FOR TESTING ARMORED VEHICLE PRODUCTS TO ASSESS THE LEVEL OF PROTECTION AGAINST MINE THREATS USING MODERN INFORMATION- MEASUREMENT SYSTEMS
Recent changes in regulatory documents and the adoption of NATO standards have necessitated a transition in the testing process to the testing and certification schemes accepted in NATO countries, particularly in the general approaches to conducting tests. Timely determination of the level of mine protection, aimed at eliminating vulnerabilities and developing more effective technical solutions, is of great importance during the creation and operation of armored vehicles. In addition, it is essential to rationally choose measurement, recording, and indication tools within information-measurement systems and to further process the obtained results in automated data collection and processing systems for use in testing serial (modernized) samples of military equipment. Given the increasing directions of enemy offensives and the use of anti-personnel and anti-tank mines, ensuring a high level of equipment protection has become a priority task for military units. Neglecting this can lead to personnel losses, reduced combat effectiveness of units, and increased resources needed to restore damaged equipment. Therefore, an effective and reliable assessment of the level of mine protection is a crucial criterion for developing and improving competitive protective systems that, above all, ensure the operator of armored vehicles can carry out their mission. The issue of testing armored vehicles to assess the level of protection against mine threats has become highly relevant during the large-scale aggression by russia. Assessing the danger to the crew resulting from an explosion under a combat vehicle is a complex task that depends on many interrelated factors. The ability to conduct measurements during an explosion is an extremely important issue for protecting the crew in armored vehicles and specialized transport vehicles. Such measurements require the use of modern information-measurement systems. The methodology, modern information-measurement systems, and the obtained results can serve as a fundamental check of the factors that determine the level of danger to the crew. In the article, the authors examine changes in the testing process based on new approaches according to regulatory documents and substantiate the methodological apparatus for testing armored vehicle products to assess the level of protection against mine threats in special period conditions, using modern information-measurement systems and taking into account changes in the technology of conducting these tests.
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 7-13
Open AccessJUSTIFICATION OF A STANDARD METHOD FOR TESTING ARMORED VEHICLE PRODUCTS TO ASSESS THE LEVEL OF PROTECTION AGAINST MINE THREATS USING MODERN INFORMATION- MEASUREMENT SYSTEMS
Recent changes in regulatory documents and the adoption of NATO standards have necessitated a transition in the testing process to the testing and certification schemes accepted in NATO countries, particularly in the general approaches to conducting tests. Timely determination of the level of mine protection, aimed at eliminating vulnerabilities and developing more effective technical solutions, is of great importance during the creation and operation of armored vehicles. In addition, it is essential to rationally choose measurement, recording, and indication tools within information-measurement systems and to further process the obtained results in automated data collection and processing systems for use in testing serial (modernized) samples of military equipment. Given the increasing directions of enemy offensives and the use of anti-personnel and anti-tank mines, ensuring a high level of equipment protection has become a priority task for military units. Neglecting this can lead to personnel losses, reduced combat effectiveness of units, and increased resources needed to restore damaged equipment. Therefore, an effective and reliable assessment of the level of mine protection is a crucial criterion for developing and improving competitive protective systems that, above all, ensure the operator of armored vehicles can carry out their mission. The issue of testing armored vehicles to assess the level of protection against mine threats has become highly relevant during the large-scale aggression by russia. Assessing the danger to the crew resulting from an explosion under a combat vehicle is a complex task that depends on many interrelated factors. The ability to conduct measurements during an explosion is an extremely important issue for protecting the crew in armored vehicles and specialized transport vehicles. Such measurements require the use of modern information-measurement systems. The methodology, modern information-measurement systems, and the obtained results can serve as a fundamental check of the factors that determine the level of danger to the crew. In the article, the authors examine changes in the testing process based on new approaches according to regulatory documents and substantiate the methodological apparatus for testing armored vehicle products to assess the level of protection against mine threats in special period conditions, using modern information-measurement systems and taking into account changes in the technology of conducting these tests.
- Open Access
- 9 October 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 20 (3) , 7-13
SUBSTANTIATION OF METHODOLOGICAL RECOMMENDATIONS FOR THE USE OF INFORMATION AND MEASURING SYSTEM BUILT ON THE LATEST HARDWARE DEVELOPMENTS DURING THE TESTING OF AME
The constant process of development of both hardware and software perfection inevitably leads to the improvement (creation) of existing (new) advanced information and measurement systems. At the same time, there is a need to develop methodological recommendations for the use of advanced information gathering and processing systems built on the basis of the latest hardware systems and complexes and software products for conducting heterogeneous tests. At the same time, there is a need to develop methodological recommendations for the use of a promising IMS for collecting and processing information built on the basis of the latest hardware systems and complexes and software products for conducting heterogeneous tests. Modern systems used for testing AME are measuring complexes that include modules for connecting sensors, modules for converting analogue sensor signals into digital form, modules for storing the received information in digital form and modules for communication with external computerised devices. Depending on the tasks of the test or experiment, the IMS can be supplemented (simplified) by the need to use certain measuring complexes and systems to measure parameters and obtain reliable information. The ideas, principles and algorithms that currently constitute the methodology of information processing have already made it possible to make a significant breakthrough in information processing technology. Processing methods and principles of their implementation for each field have their own specific features, which are primarily determined by the specific type of information carrier, encoding methods and ways of presenting the results of information processing. As a result, information processing arrangements for different areas often appear to be outwardly dissimilar. However, this external dissimilarity hides the same methodology and principles of building processing systems, which is crucial. The authors of the article study the capabilities of the latest hardware systems and complexes which should be included in advanced IMS and substantiate new methodological approaches, in accordance with regulatory and legal documents, to the use of such IMS during testing of AME.
- 9 October 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 20 (3) , 7-13
Open AccessSUBSTANTIATION OF METHODOLOGICAL RECOMMENDATIONS FOR THE USE OF INFORMATION AND MEASURING SYSTEM BUILT ON THE LATEST HARDWARE DEVELOPMENTS DURING THE TESTING OF AME
The constant process of development of both hardware and software perfection inevitably leads to the improvement (creation) of existing (new) advanced information and measurement systems. At the same time, there is a need to develop methodological recommendations for the use of advanced information gathering and processing systems built on the basis of the latest hardware systems and complexes and software products for conducting heterogeneous tests. At the same time, there is a need to develop methodological recommendations for the use of a promising IMS for collecting and processing information built on the basis of the latest hardware systems and complexes and software products for conducting heterogeneous tests. Modern systems used for testing AME are measuring complexes that include modules for connecting sensors, modules for converting analogue sensor signals into digital form, modules for storing the received information in digital form and modules for communication with external computerised devices. Depending on the tasks of the test or experiment, the IMS can be supplemented (simplified) by the need to use certain measuring complexes and systems to measure parameters and obtain reliable information. The ideas, principles and algorithms that currently constitute the methodology of information processing have already made it possible to make a significant breakthrough in information processing technology. Processing methods and principles of their implementation for each field have their own specific features, which are primarily determined by the specific type of information carrier, encoding methods and ways of presenting the results of information processing. As a result, information processing arrangements for different areas often appear to be outwardly dissimilar. However, this external dissimilarity hides the same methodology and principles of building processing systems, which is crucial. The authors of the article study the capabilities of the latest hardware systems and complexes which should be included in advanced IMS and substantiate new methodological approaches, in accordance with regulatory and legal documents, to the use of such IMS during testing of AME.
- Open Access
- 9 October 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 20 (3) , 106-114
QUALIMETRIC MODEL OF A HIGH-TECH INFORMATION AND MEASURING SYSTEM FOR THE PREPARATION AND CONDUCT OF TESTS
The issue of the report concerns the selection of information and testing equipment or a system that will be used for planning and conducting tests with minimal error and high efficiency. The complexity of consideration as a whole, when choosing the components of the information and measurement system and determining the qualitative measurement model determines the need to divide it into several stages and consider them separately. The stages of building a qualitative model of a high-tech information and measurement system for preparing and conducting tests are divided into: modeling stage; design stage; stage of implementation; interpretation stage. At the stage of determining the limitations, it should be taken into account in which division the tests are carried out, namely: by purpose; by the level of testing; by stages of product development; by testing finished products; according to the conditions and venue; by the duration of the tests; by type of action; by the result of the action; according to the characteristics of the object. The relevance of the work is the consideration of the stages of building a qualitative model of the information and measurement system in the difficult conditions of the military and political situation in Ukraine. The purpose of the work is to develop the technological aspects of qualitative modeling, as well as the stages of qualitative model examination. Additional results of the work can be – to obtain initial data (parameters); – to break down important indicators (parameters) according to their importance using an expert method; – to assess state and foreign requirements for the system for further work; – to assess and choose a direction based on the price indicator (factor) and duration of work or other indicators; – provide recommendations for making a decision regarding the construction of a qualitative model of the properties of the information and measurement system;–allow to improve (apply) the process of conducting tests of high-tech weapons and military equipment; – allow to use qualitative model databases to reduce preparation time to conducting tests of high-tech weapons and military equipment;–will allow to expand the directions for finding new features and providing recommendations in the further process of tests. The article builds a qualitative model (hereafter KM) of the formation (creation) of KM stages of the information and measurement system (hereafter IMS) at the preparatory stage of OVT tests. Stages of KM examination have been developed based on the current purpose of the tests, the required quantity and quality of recorded and measured indicators, the complexity of measurements and their analysis. Formulated KM efficiency indicators are as follows: minimal error; cost of equipment; equipment resource; others. The stages of selection of IBS components have been developed and the KM of assessment at the preparatory stage of tests has been determined. A model of quantitative quality measurement has been developed, taking into account possible errors and the provided, structural, technological aspects and stages of qualitative modeling. The most expedient tool for a systematic approach to decision-making during the construction of the IBS CM has been determined. The results of a similar review of literary sources of domestic and foreign scientists are presented. However, the insufficient development of the scientific basis for creating KM efficiency indicators is noted. The normative and real vectors of the creation of the CM are determined, which are laid down as important indicators of the effectiveness of the CM, by changing which it is possible to change the direction of the selection of the creation of the CM of the IAS.
- 9 October 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 20 (3) , 106-114
Open AccessQUALIMETRIC MODEL OF A HIGH-TECH INFORMATION AND MEASURING SYSTEM FOR THE PREPARATION AND CONDUCT OF TESTS
The issue of the report concerns the selection of information and testing equipment or a system that will be used for planning and conducting tests with minimal error and high efficiency. The complexity of consideration as a whole, when choosing the components of the information and measurement system and determining the qualitative measurement model determines the need to divide it into several stages and consider them separately. The stages of building a qualitative model of a high-tech information and measurement system for preparing and conducting tests are divided into: modeling stage; design stage; stage of implementation; interpretation stage. At the stage of determining the limitations, it should be taken into account in which division the tests are carried out, namely: by purpose; by the level of testing; by stages of product development; by testing finished products; according to the conditions and venue; by the duration of the tests; by type of action; by the result of the action; according to the characteristics of the object. The relevance of the work is the consideration of the stages of building a qualitative model of the information and measurement system in the difficult conditions of the military and political situation in Ukraine. The purpose of the work is to develop the technological aspects of qualitative modeling, as well as the stages of qualitative model examination. Additional results of the work can be – to obtain initial data (parameters); – to break down important indicators (parameters) according to their importance using an expert method; – to assess state and foreign requirements for the system for further work; – to assess and choose a direction based on the price indicator (factor) and duration of work or other indicators; – provide recommendations for making a decision regarding the construction of a qualitative model of the properties of the information and measurement system;–allow to improve (apply) the process of conducting tests of high-tech weapons and military equipment; – allow to use qualitative model databases to reduce preparation time to conducting tests of high-tech weapons and military equipment;–will allow to expand the directions for finding new features and providing recommendations in the further process of tests. The article builds a qualitative model (hereafter KM) of the formation (creation) of KM stages of the information and measurement system (hereafter IMS) at the preparatory stage of OVT tests. Stages of KM examination have been developed based on the current purpose of the tests, the required quantity and quality of recorded and measured indicators, the complexity of measurements and their analysis. Formulated KM efficiency indicators are as follows: minimal error; cost of equipment; equipment resource; others. The stages of selection of IBS components have been developed and the KM of assessment at the preparatory stage of tests has been determined. A model of quantitative quality measurement has been developed, taking into account possible errors and the provided, structural, technological aspects and stages of qualitative modeling. The most expedient tool for a systematic approach to decision-making during the construction of the IBS CM has been determined. The results of a similar review of literary sources of domestic and foreign scientists are presented. However, the insufficient development of the scientific basis for creating KM efficiency indicators is noted. The normative and real vectors of the creation of the CM are determined, which are laid down as important indicators of the effectiveness of the CM, by changing which it is possible to change the direction of the selection of the creation of the CM of the IAS.
- Open Access
- 9 October 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 20 (3) , 70-75
ANALYSIS OF THE POSSIBILITY OF USING AN AUTONOMOUS MEASUREMENT SYSTEM AND REGISTRATION OF THE ASSESSMENT OF THE LEVEL OF PROTECTION OF THE ARMOURED VEHICLE CREW
In the context of large-scale armed aggression by the Russian Federation and growing losses from mine injuries, there is a significant need to obtain objective information about the level of protection provided by military armoured vehicles. At the same time, Ukrainian defence enterprises are constantly working to develop the latest methods to improve the protection of vehicle crews from the threat of mines and explosives. There is an acute problem and an essential need to quickly improve the mine resistance of standard models of armoured vehicles and, as a result, the need to quickly determine the effectiveness of the measures taken and make engineering decisions. The basis for the development of modern mine protection equipment should be to identify the impact of the shock wave not only on the vehicle structure, but primarily on the crew members. It is possible to evaluate the results, conduct comprehensive research and provide reasonable recommendations for further work only on the basis of the results of tests (experimental physical modelling) during which physical factors affecting the crew are measured. It is impossible to carry out the necessary measurements without the use of modern sensors (sensors) in conjunction with an information and measurement system that will ensure the reception, processing and registration of information. The main criteria for selecting sensors are sensitivity, resolution, linearity, frequency response, temperature response, noise level and long-term stability.
- 9 October 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 20 (3) , 70-75
Open AccessANALYSIS OF THE POSSIBILITY OF USING AN AUTONOMOUS MEASUREMENT SYSTEM AND REGISTRATION OF THE ASSESSMENT OF THE LEVEL OF PROTECTION OF THE ARMOURED VEHICLE CREW
In the context of large-scale armed aggression by the Russian Federation and growing losses from mine injuries, there is a significant need to obtain objective information about the level of protection provided by military armoured vehicles. At the same time, Ukrainian defence enterprises are constantly working to develop the latest methods to improve the protection of vehicle crews from the threat of mines and explosives. There is an acute problem and an essential need to quickly improve the mine resistance of standard models of armoured vehicles and, as a result, the need to quickly determine the effectiveness of the measures taken and make engineering decisions. The basis for the development of modern mine protection equipment should be to identify the impact of the shock wave not only on the vehicle structure, but primarily on the crew members. It is possible to evaluate the results, conduct comprehensive research and provide reasonable recommendations for further work only on the basis of the results of tests (experimental physical modelling) during which physical factors affecting the crew are measured. It is impossible to carry out the necessary measurements without the use of modern sensors (sensors) in conjunction with an information and measurement system that will ensure the reception, processing and registration of information. The main criteria for selecting sensors are sensitivity, resolution, linearity, frequency response, temperature response, noise level and long-term stability.