Zheneta Kh. Tashmukhambetova
Research Subjects
Research Interests
Zheneta Kh. Tashmukhambetova has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Yermek A. Aubakirov
Al-Farabi Kazakh National University
5 shared publications - Larissa R. Sassykova
Al-Farabi Kazakh National University
3 shared publications - Firuza Akhmetova
Industrial and Technological Institute, Zhangir Khan West Kazakhstan Agrarian and Technical University, Uralsk 090009, Kazakhstan
2 shared publications - Subramanian Sendilvelan
Department of Mechanical Engineering, Dr.M.G.R. Educational and Research Institute, Chennai 600095, India
2 shared publications A. A. Batyrbayeva
1 shared publication- Albina S. Alpysbay
Al-Farabi Kazakh National University
1 shared publication
Latest Publications
- Open Access
- 30 March 2026
- Published by Center of Physical Chemical Methods of Research and Analysis in Chemical Bulletin of Kazakh National University
- Vol. 118 (1) , 28-39
Көмірсутек қоспаларының термокаталитикалық ыдырауы нәтижесінде түзілетін сұйық өнімдердің химиялық құрамын анықтау
This study presents the results of a comprehensive experimental investigation of the co-pyrolysis processes of carbon-containing wastes of various origins, including coal dust from the Kulan deposit, plastic waste based on polyethylene and polypropylene, gossypol resin isolated from soapstock generated during cottonseed oil production, and oil sludge from the “Petro Kazakhstan Oil Products” refinery (Shymkent). The experiments were carried out over a wide temperature range of 500–700 °C at atmospheric pressure in inert (N₂) and weakly acidic (CO₂) gas atmospheres. Fractional separation and identification of the components of the liquid pyrolysis products were performed using extraction methods. It was established that the nature of the gas medium and the process temperature exert a decisive influence on the yield and distribution of oil, resin, asphaltene fractions, and insoluble substances. It was shown that the thermocatalytic cracking of individual wastes and their mixtures (1:1:1:1) results in the formation of a liquid product dominated by oils and resins with a reduced asphaltene content. A pronounced synergistic effect of co-pyrolysis was identified, associated with the destruction of polyphenolic structures and fatty acids of gossypol resin, leading to hydrogen formation that contributes to the stabilization of active hydrocarbon radicals generated during the thermal decomposition of coal dust and polymer waste. This promotes the intensification of secondary synthesis reactions with the formation of olefins, aromatic hydrocarbons, and resinous compounds, as well as a redistribution of the fractional composition of liquid products toward an increased oil fraction at elevated temperatures. Gas chromatography–mass spectrometry analysis demonstrated that co-pyrolysis of the multicomponent mixture ensures the formation of hydrocarbon products with a uniform distribution across the main classes of compounds, confirming the potential of this approach for the integrated processing of heterogeneous carbon-containing wastes.
- 30 March 2026
- Published by Center of Physical Chemical Methods of Research and Analysis in Chemical Bulletin of Kazakh National University
- Vol. 118 (1) , 28-39
Open AccessКөмірсутек қоспаларының термокаталитикалық ыдырауы нәтижесінде түзілетін сұйық өнімдердің химиялық құрамын анықтау
This study presents the results of a comprehensive experimental investigation of the co-pyrolysis processes of carbon-containing wastes of various origins, including coal dust from the Kulan deposit, plastic waste based on polyethylene and polypropylene, gossypol resin isolated from soapstock generated during cottonseed oil production, and oil sludge from the “Petro Kazakhstan Oil Products” refinery (Shymkent). The experiments were carried out over a wide temperature range of 500–700 °C at atmospheric pressure in inert (N₂) and weakly acidic (CO₂) gas atmospheres. Fractional separation and identification of the components of the liquid pyrolysis products were performed using extraction methods. It was established that the nature of the gas medium and the process temperature exert a decisive influence on the yield and distribution of oil, resin, asphaltene fractions, and insoluble substances. It was shown that the thermocatalytic cracking of individual wastes and their mixtures (1:1:1:1) results in the formation of a liquid product dominated by oils and resins with a reduced asphaltene content. A pronounced synergistic effect of co-pyrolysis was identified, associated with the destruction of polyphenolic structures and fatty acids of gossypol resin, leading to hydrogen formation that contributes to the stabilization of active hydrocarbon radicals generated during the thermal decomposition of coal dust and polymer waste. This promotes the intensification of secondary synthesis reactions with the formation of olefins, aromatic hydrocarbons, and resinous compounds, as well as a redistribution of the fractional composition of liquid products toward an increased oil fraction at elevated temperatures. Gas chromatography–mass spectrometry analysis demonstrated that co-pyrolysis of the multicomponent mixture ensures the formation of hydrocarbon products with a uniform distribution across the main classes of compounds, confirming the potential of this approach for the integrated processing of heterogeneous carbon-containing wastes.
- Open Access
- 4 October 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Sciences and Engineering Technology
- p. 117-132
Hydrothermal Catalytic Transformations of Polymeric Wastes over Zeolite Catalysts Modified with Molybdenum and Tungsten
The article is devoted to the study of the adsorption properties and morphology of new composite catalysts based on acid-activated zeolite heulandite-clinoptilolite of the Kazakhstan Taizhuzgen deposit modified with molybdenum salts (NH4)MoO·4H2O and tungsten (NH4)5H5[H2(WO4)6]·H2O, for the process of thermocatalytic hydrogenation of plastic waste. The study of the developed catalyst by the method of adsorption nitrogen porometry demonstrated the presence of typical type IV isotherms, which indicated the formation of a porous adsorbent by multilayer nitrogen adsorption in the mesopores of the catalyst. The adsorption capacity of the structure formed by the catalyst based on zeolite modified with molybdenum and tungsten, due to the presence of predominantly mesoporous cavities, is able to selectively influence the process of hydrothermocatalytic processing of waste polymers based on polyethylene and polypropylene. The pore size distribution indicates the presence of mesopores and an insignificant number of micropores at low pressure. The catalyst samples were tested in the thermocatalytic hydrogenation reaction of polymer waste. Significant gas formation and predominant content of alkanes, isoalkanes, alkenes and aromatic hydrocarbons in liquid products are shown. It is obviously that the main contribution to the transformations made by mesoporous inclusions in the cavities of the zeolite under study formed during their treatment with molybdenum and tungsten salts.
- 4 October 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Sciences and Engineering Technology
- p. 117-132
Open AccessHydrothermal Catalytic Transformations of Polymeric Wastes over Zeolite Catalysts Modified with Molybdenum and Tungsten
The article is devoted to the study of the adsorption properties and morphology of new composite catalysts based on acid-activated zeolite heulandite-clinoptilolite of the Kazakhstan Taizhuzgen deposit modified with molybdenum salts (NH4)MoO·4H2O and tungsten (NH4)5H5[H2(WO4)6]·H2O, for the process of thermocatalytic hydrogenation of plastic waste. The study of the developed catalyst by the method of adsorption nitrogen porometry demonstrated the presence of typical type IV isotherms, which indicated the formation of a porous adsorbent by multilayer nitrogen adsorption in the mesopores of the catalyst. The adsorption capacity of the structure formed by the catalyst based on zeolite modified with molybdenum and tungsten, due to the presence of predominantly mesoporous cavities, is able to selectively influence the process of hydrothermocatalytic processing of waste polymers based on polyethylene and polypropylene. The pore size distribution indicates the presence of mesopores and an insignificant number of micropores at low pressure. The catalyst samples were tested in the thermocatalytic hydrogenation reaction of polymer waste. Significant gas formation and predominant content of alkanes, isoalkanes, alkenes and aromatic hydrocarbons in liquid products are shown. It is obviously that the main contribution to the transformations made by mesoporous inclusions in the cavities of the zeolite under study formed during their treatment with molybdenum and tungsten salts.
- Open Access
- 5 July 2022
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 9 (3) , 20229302
Activity features of catalysts for thermocatalytic hydrogenation processing of polymer waste
The aim of this study was to obtain new catalysts for the processing of carbon-containing polymer waste based on polyethylene and polypropylene, represented mostly by lids from beverages bottled in plastic containers, which accumulate in huge quantities in landfills, by the method of thermocatalytic hydrogenation into liquid fuels and other products. The process was carried out in the presence of fuel oil as a binder, a source of hydrogen and additional hydrocarbons. Thus, two tasks can be solved simultaneously: recycling the polymer waste and obtaining the alternative raw materials from the polymer waste in order to save resources and improve the environmental situation in general. New catalysts based on activated zeolite modified with Mo(VI) and W(VI) salts of various concentrations for the thermocatalytic hydrogenation processing of waste plastics into motor fuels were synthesized. The composition, structure, morphology and adsorption properties of the catalysts were determined by different physicochemical methods. The suitability of the obtained catalysts for use in the thermocatalytic hydrogenation processing of plastic waste into fuels was determined. The catalysts were tested during the processing of a mixture of polyethylene-polypropylene: a paste-forming agent (fuel oil) at T=450 °C and a pressure of 0.6 MPa. The individual and group composition of gasoline, diesel and gas oil fractions was determined by chromatography coupled with mass spectrometry. The maximum yield of the gasoline fraction (16.9 wt.%) and diesel fraction (39.31 wt.%) was obtained on a 2%W(VI)/diatomite catalyst.
- 5 July 2022
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 9 (3) , 20229302
Open AccessActivity features of catalysts for thermocatalytic hydrogenation processing of polymer waste
The aim of this study was to obtain new catalysts for the processing of carbon-containing polymer waste based on polyethylene and polypropylene, represented mostly by lids from beverages bottled in plastic containers, which accumulate in huge quantities in landfills, by the method of thermocatalytic hydrogenation into liquid fuels and other products. The process was carried out in the presence of fuel oil as a binder, a source of hydrogen and additional hydrocarbons. Thus, two tasks can be solved simultaneously: recycling the polymer waste and obtaining the alternative raw materials from the polymer waste in order to save resources and improve the environmental situation in general. New catalysts based on activated zeolite modified with Mo(VI) and W(VI) salts of various concentrations for the thermocatalytic hydrogenation processing of waste plastics into motor fuels were synthesized. The composition, structure, morphology and adsorption properties of the catalysts were determined by different physicochemical methods. The suitability of the obtained catalysts for use in the thermocatalytic hydrogenation processing of plastic waste into fuels was determined. The catalysts were tested during the processing of a mixture of polyethylene-polypropylene: a paste-forming agent (fuel oil) at T=450 °C and a pressure of 0.6 MPa. The individual and group composition of gasoline, diesel and gas oil fractions was determined by chromatography coupled with mass spectrometry. The maximum yield of the gasoline fraction (16.9 wt.%) and diesel fraction (39.31 wt.%) was obtained on a 2%W(VI)/diatomite catalyst.
- Open Access
- 30 June 2021
- Published by Center of Physical Chemical Methods of Research and Analysis in Chemical Bulletin of Kazakh National University
- Vol. 101 (2) , 12-18
Recycling of waste plastics to liquid fuel mixture over composite zeolites catalysts
Plastic waste production and consumption is increasing at an alarming rate with the increase of the human population, rapid economic growth, continuous urbanization, and changes in lifestyle. In addition, the short life span of plastic accelerates the production of plastic waste on a daily basis. Plastic waste recycling is carried out in different ways, but in most developing countries, open or landfill disposal is a common practice for plastic waste management. Plastic recycling into feedstocks, also known as chemical recycling, is encouraged all over the world. One such area is the thermal and catalytic thermal degradation of plastics into hydrocarbon fractions, which can be used as high-quality motor fuel after appropriate processing. Hydrocracking in the presence of a catalyst is a promising method of converting waste plastic materials to high quality liquid transportation fuels with decreased amounts of olefins and heteroatoms such as S, N, Cl, N, and O. The article deals with the study of hydrocracking of waste plastic into high quality liquid fuel on various catalysts based on natural zeolite deposits Taizhuzgen. The aim of the work is to determine the effect of new composite catalysts on the yield of liquid products by studying the specific surface and porous structure based on natural zeolite modified with Mо salt. It is established that the modification of natural zeolite with Mo affects the morphology of the catalyst, therefore, the obtained catalysts have different effects on the yield and composition of liquid fractions during the hydrogenation thermocatalytic transformation of hydrocarbons. The highest yield of liquid products (61.56%) was achieved using the 2% Mo/Taizhuzgen zeolite catalyst, which was chosen as optimal.
- 30 June 2021
- Published by Center of Physical Chemical Methods of Research and Analysis in Chemical Bulletin of Kazakh National University
- Vol. 101 (2) , 12-18
Open AccessRecycling of waste plastics to liquid fuel mixture over composite zeolites catalysts
Plastic waste production and consumption is increasing at an alarming rate with the increase of the human population, rapid economic growth, continuous urbanization, and changes in lifestyle. In addition, the short life span of plastic accelerates the production of plastic waste on a daily basis. Plastic waste recycling is carried out in different ways, but in most developing countries, open or landfill disposal is a common practice for plastic waste management. Plastic recycling into feedstocks, also known as chemical recycling, is encouraged all over the world. One such area is the thermal and catalytic thermal degradation of plastics into hydrocarbon fractions, which can be used as high-quality motor fuel after appropriate processing. Hydrocracking in the presence of a catalyst is a promising method of converting waste plastic materials to high quality liquid transportation fuels with decreased amounts of olefins and heteroatoms such as S, N, Cl, N, and O. The article deals with the study of hydrocracking of waste plastic into high quality liquid fuel on various catalysts based on natural zeolite deposits Taizhuzgen. The aim of the work is to determine the effect of new composite catalysts on the yield of liquid products by studying the specific surface and porous structure based on natural zeolite modified with Mо salt. It is established that the modification of natural zeolite with Mo affects the morphology of the catalyst, therefore, the obtained catalysts have different effects on the yield and composition of liquid fractions during the hydrogenation thermocatalytic transformation of hydrocarbons. The highest yield of liquid products (61.56%) was achieved using the 2% Mo/Taizhuzgen zeolite catalyst, which was chosen as optimal.
- 15 August 2018
- Published by National Academy of Sciences of the Republic of Kazakshtan in Series of Geology and Technical Sciences
- Vol. 4 (436) , 12-23
METAL BLOCK CATALYSTS FOR COMPLEX CLEANING OF HARMFUL EMISSIONS OF TRANSPORT AND THE INDUSTRY
- 15 August 2018
- Published by National Academy of Sciences of the Republic of Kazakshtan in Series of Geology and Technical Sciences
- Vol. 4 (436) , 12-23
METAL BLOCK CATALYSTS FOR COMPLEX CLEANING OF HARMFUL EMISSIONS OF TRANSPORT AND THE INDUSTRY
- 1 July 2016
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 50 (4) , 220-225
Hydrogenation processing of carbon-containing wastes in a mixture with oil shale from the Kenderlyk deposit
- 1 July 2016
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 50 (4) , 220-225
Hydrogenation processing of carbon-containing wastes in a mixture with oil shale from the Kenderlyk deposit