Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Firuza Akhmetova has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modified Bentonite Catalysts: Structure–Property Relationships, Modification Strategies, and Perspectives for Waste Valorization into Hydrogen-Rich Products

    by Ayazhan Kurmangaliyeva, Firuza Akhmetova, Zhannat Kareshova, Svetlana Yermukhanova, Altynai Kupeshova, Sapura Satayeva, Rinat Iskakov

    Natural bentonite, dominated by montmorillonite-type layered aluminosilicates, is increasingly considered as an inexpensive and environmentally acceptable support or catalyst for the thermochemical conversion of waste carbon streams. Its relevance to catalysis arises from a combination of cation-exchange capacity, swelling behavior, hierarchical porosity after modification, and the possibility of generating Brønsted, Lewis, redox and metallic active sites. This review critically evaluates bentonite modification strategies—acid activation, alkaline and sodium exchange, inorganic oxide pillaring, transition- and noble-metal impregnation, organosilane or surfactant functionalization, and carbon-based hybridization—with emphasis on their consequences for texture, acidity, thermal stability, metal dispersion and catalytic behavior. The review then connects these structure–property relationships with the emerging application of modified bentonites in plastic-waste thermocatalysis and hydrogen-rich product formation. The recent literature indicates that acid-modified bentonite can substantially improve liquid hydrocarbon formation from polyethylene, binder-free bentonite pellets can operate at kilogram-batch scale for drop-in fuels, and Ni-, Fe- or Ni–Fe-modified bentonite-type catalysts can promote tar cracking, reforming and gas upgrading. However, direct evidence for high hydrogen yields from plastic waste over bentonite remains narrower than the evidence for liquid-fuel production, biomass pyrolysis or model-compound reforming. Therefore, this article distinguishes between direct plastic-waste evidence and transferable evidence from biomass, acetic acid, tar and hydrocarbon reforming studies. The analysis identifies Ni-impregnated acid-activated or pillared bentonite, Ni–Fe/bentonite, and La/Ca-promoted Ni/bentonite as the most promising routes for plastic-derived hydrogen-rich syngas, while acid activation alone is best regarded as a pretreatment rather than a complete catalyst design. Key limitations include catalyst deactivation by coke, metal sintering, chloride poisoning from PVC, inconsistent reporting of gas yields, and insufficient life-cycle and techno-economic analysis. A roadmap is proposed for designing reproducible, scalable bentonite catalysts for circular plastic-waste valorization.


  • Open Access

    Hierarchically Porous Carbon–Diatomite Composite: Structural Development and Application in Saline Groundwater Treatment Under Real Conditions

    by Sapura Satayeva, Askar Bakushev, Svetlana Yermukhanova, Altynai Kupeshova, Nurgul Satybayeva, Aliya Urazova, Firuza Akhmetova

    This study reports the development of a hierarchically porous material based on natural diatomite, thermally treated diatomite (450 °C), and an activated carbon-modified diatomite composite for saline groundwater treatment in West Kazakhstan, addressing the need for efficient desalination solutions under real environmental conditions. The material was synthesized via sequential thermal activation at 450 °C followed by incorporation of activated carbon, with bentonite used as a binder to improve mechanical stability. Comprehensive physicochemical characterization (SEM, XRD, XRF, BET, DTA, and FTIR) confirmed significant structural and compositional transformations, including silica enrichment, removal of impurities, and the development of a well-defined hierarchical porous network. The specific surface area increased from 8 to 10 m2/g for natural diatomite to 35–40 m2/g for thermally treated diatomite and further to 55–60 m2/g for the activated carbon-modified diatomite composite, accompanied by enhanced pore volume and mesoporosity. Performance evaluation using real groundwater samples demonstrated that thermally treated diatomite (450 °C) improved removal efficiency by approximately 19%, while the activated carbon-modified diatomite composite achieved 35–37% removal of chloride, sulfate, and total dissolved solids under multi-ion competitive conditions. The enhanced adsorption performance is attributed to the synergistic effect of increased surface area, improved pore accessibility, and additional active sites introduced by activated carbon. The adsorption process is governed by ion bridging mediated by multivalent cations, pore filling within the hierarchical pore structure, and surface complexation on silanol and metal–hydroxyl functional groups. Leaching tests confirmed the structural stability of the composite and indicated no significant release of environmentally relevant elements under aqueous conditions. Compared with natural diatomite, the thermally treated and activated carbon-modified materials demonstrate improved adsorption efficiency and stable performance under realistic groundwater conditions. These results highlight their applicability for decentralized water treatment systems in regions affected by saline groundwater contamination.

  • Open Access

    Diatomite from West Kazakhstan as a Sustainable Raw Material for Borosilicate Glass Production

    by Sapura Satayeva, Vera Burakhta, Bekbulat Shakeshev, Firuza Akhmetova, Beksultan Idrisov

    This study explores the use of diatomite from West Kazakhstan as a silica-containing raw material for borosilicate glass production. Three glass batches, based on quartz sand, chalk, and diatomite, were synthesized with varying ratios of network-forming and modifying oxides. Partial replacement of quartz sand with diatomite enabled glass melting at 1150 °C, producing a homogeneous melt. Glasses with higher diatomite content showed improved chemical and water resistance; specifically, the sample containing 52% diatomite achieved hydrolytic class III and water resistance class IV (XA = 1.0 cm3·g−1), whereas quartz-based control samples corresponded to classes IV–V. Heat resistance ranged from 120 to 160 °C depending on composition. These findings demonstrate that amorphous SiO2 and active oxides in diatomite promote a stronger three-dimensional glass network, highlighting the potential of locally sourced diatomite as an alternative SiO2 source for sustainable, energy-efficient borosilicate glass production.


  • Open Access

    Thermocatalytic Upgrading of Polymer Waste to Hydrocarbon Fuel Fractions over Mo- and W-Modified Natural Taizhuzgen Zeolite

    by Yermek Aubakirov, Firuza Akhmetova

    Plastic recycling, also known as chemical recycling, is widely promoted worldwide as a sustainable way to reduce polymer waste and produce alternative fuel sources. One of the promising areas in this field is the thermocatalytic decomposition of plastics into hydrocarbon fractions suitable for use as motor fuel. This study investigates the feasibility of using natural Taizhuzgen zeolite separately modified with molybdenum and tungsten and activated by an acid-free method for the thermocatalytic hydrogenation of polymer waste. The catalyst was prepared by modifying the activated zeolite with molybdenum ((NH4)6Mo7O24·4H2O) and tungsten ((NH4)5H5[H2(WO4)6]·H2O) salts. Thermal catalytic hydrogenation experiments were conducted under controlled temperature and barometric conditions, and the resulting liquid products were separated into fractions with boiling points of 180 °C, 180–250 °C, and 250–320 °C. The individual and group hydrocarbon compositions of the gasoline, diesel, and heavy gas oil fractions were determined using gas chromatography–mass spectrometry. The structural and surface characteristics of the synthesized composite catalysts were studied using electron microscopy and physicochemical analysis. The results show that Taizhuzgen zeolite modified with molybdenum and tungsten exhibits favorable textural properties and catalytic activity, which increases the yield of liquid fuel fractions. The developed catalyst is promising for use in the resource-efficient thermal catalytic processing of polymer waste into motor fuel.


  • Open Access

    Use of local raw materials to obtain glass used in glazing of ceramic products

    by Safura Satayeva, Firuza Akhmetova, Svetlana Yermukhanova, G. Gubaidullina, Aibarsha Abdrakhmanova, Manshuk Ibrayeva, Mehmet Ozturk, Tilekshi Utepova, Aliya Urazova

    Glass is one of the widely used materials in the construction industry and in everyday life. The year-on-year growing demand for various types of glass products pushes the glass-making industries to increase their production volumes and not to lower their quality levels. The scientific and technical progress in glass extraction has gradually expanded the area of ​​its effective use. In recent years, significant changes have taken place in the glassmaking technique. New production methods and ways of improving existing technological processes appeared, and new areas of glass application began to open. The chemical composition of the product was changed and different types of glass were made. In this regard, the study of the method of obtaining glass with different properties is one of the most important issues. In order to prepare the composition of colored glass used in the production of various products, colored glass was obtained in laboratory conditions. Physico-chemical properties of the obtained colored glass were studied in order to determine the area of application. Based on the research results, the obtained colored glass can be used for decorative purposes.

  • PURIFICATION OF NATURAL GAS FROM THE KARACHAGANAK GAS CONDENSATE FIELD FROM ACIDIC COMPONENTS

    by Zhangir Khan West Kazakhstan Agrarian Technical University, S.S. Satayeva, F.ZH. Akhmetova, A.F. Urazova, M.ZH. Ryskaliyev, E.M. Iskaliyev

    Purification of natural gas from sulfur compounds and carbon dioxide remains the main problem of its (gas) preparation for processing. In recent decades, this task has become even more urgent. Excessive entrainment of solid particles and hydrocarbons in the spent amine recirculation system leads to increased foaming in the absorber and an increase in weathering gas, which in turn leads to a decrease in the throughput of the fuel gas purification plant. One of the methods of gas purification is amine purification. An increase in the efficiency of using amine purification is possible due to the modernization of the purification unit. Based on the obtained patterns, a technology for filtering regenerated amine has been developed and investigated, which will significantly increase the energy efficiency and productivity of the process.

  • Open Access

    Development of Modified Sorbents Based on Diatomite in Western Kazakhstan for Groundwater Desalination

    by Sapura Satayeva, Nurgul Montayeva, Sarsenbek Montayev, Firuza Akhmetova, Dauriya Nazarova, Aibarsha Abdrakhmanova, Aigul Mendygalieva

    The increasing anthropogenic pressure on the environment results in groundwater pollution, adversely affect ing the health of humans, animals, and the plant ecosystem. For farming enterprises in West Kazakhstan located in low-water areas of the arid steppe and semi-desert zones, a significant challenge is the availability of clean water for animal watering due to pollution and elevated levels of mineralization. The study is dedicated to investigating the adsorption capacity of diatomite from West Kazakhstan and assessing its potential application as a sorbent for purifying groundwater from saline compounds. Groundwater purification was performed in the settlement of Zhanakala, Zhangalinsky district in West Kazakhstan Region. It has been demonstrated that the degree of mineralization of the investigated water using diatomite can be increased by calcining the diatomite at T = 450 ℃, incorporating activated carbon, and introducing rocks containing clay minerals, particularly bentonite.

  • Open Access

    Research of zeolite catalysts for the process of alkylation of aromatic hydrocarbons

    by H. Arbag, S. Satayeva, Zh. Yerzhanova, F.ZH. Akhmetova, B. Khamzina, A. Kairgaziyeva, A. Beimbetova

    The experience of studying the process of alkylation of toluene with butene in the presence of a catalyst based on natural zeolite shows the high fundamental importance of toluene to butene ratio in the reaction zone with a uniform concentration distribution of butene over the entire surface of the catalyst. Such process conditions differ in activity, selectivity, as well as the duration of the solid catalystoperation. The synthesis of a catalyst based on natural zeolite was effectively carried out by the absorption method. The range of values of the main parameters and general properties of the catalyst synthesis that ensure the effective conduct of the alkylation reaction is determined. The study of acid centers was carried out by the method of direct registration of OH groups of catalysts based on natural zeolite and IR spectroscopy. Subsequently, the acidic properties of decationized and heat-treated zeolite, and catalysts based on it were investigated. X-ray structural analysis was performed in the laboratory of physical and chemical research methods to determine the mineral and chemical composition of Koskuduk amorphous rock clays. The 5 phases were identified based on the results of X-ray analysis of the studied kaolinite clay: α-quartz- SiO2, calcite СаСО3, mica R1R2-3 [AISi3O10](OH, F)2, R1 = К, Na; R2 = Al, Mg, Fe, Li; mixed-layer mineral and chlorite impurities.

  • Open Access

    Activity features of catalysts for thermocatalytic hydrogenation processing of polymer waste

    by Zheneta Kh. Tashmukhambetova, Tanakoz O. Kalamgali, Yermek A. Aubakirov, Larissa R. Sassykova, Firuza Zh. Akhmetova, Albina S. Alpysbay

    The aim of this study was to obtain new catalysts for the processing of carbon-containing polymer waste based on polyethylene and polypropylene, represented mostly by lids from beverages bottled in plastic containers, which accumulate in huge quantities in landfills, by the method of thermocatalytic hydrogenation into liquid fuels and other products. The process was carried out in the presence of fuel oil as a binder, a source of hydrogen and additional hydrocarbons. Thus, two tasks can be solved simultaneously: recycling the polymer waste and obtaining the alternative raw materials from the polymer waste in order to save resources and improve the environmental situation in general. New catalysts based on activated zeolite modified with Mo(VI) and W(VI) salts of various concentrations for the thermocatalytic hydrogenation processing of waste plastics into motor fuels were synthesized. The composition, structure, morphology and adsorption properties of the catalysts were determined by different physicochemical methods. The suitability of the obtained catalysts for use in the thermocatalytic hydrogenation processing of plastic waste into fuels was determined. The catalysts were tested during the processing of a mixture of polyethylene-polypropylene: a paste-forming agent (fuel oil) at T=450 °C and a pressure of 0.6 MPa. The individual and group composition of gasoline, diesel and gas oil fractions was determined by chromatography coupled with mass spectrometry. The maximum yield of the gasoline fraction (16.9 wt.%) and diesel fraction (39.31 wt.%) was obtained on a 2%W(VI)/diatomite catalyst.