LMLuan Carlos dos Santos Mazza

Luan Carlos dos Santos Mazza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Luan Carlos dos Santos Mazza has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Single-Phase Single-Stage NPC AC-DC Converter Applied as Electric Vehicle Battery Charger

    by José Janiere Silva De Souza, Luan Carlos Dos Santos Mazza, Welton Da Silva Lima, Samanta Gadelha Barbosa, Fernando Luiz Marcelo Antunes

    This paper explores the application of a bidirectional single-phase single-stage NPC ac-dc converter for electric vehicle onboard chargers. The ac side consists of two NPC arms with an autotransformer, providing reduced voltage and current stress on switches while generating a five-level waveform and increasing current ripple frequency. The battery side employs a full-bridge converter and the power transfer is based on the dual active bridge principle. A theoretical study of the structure and operating principles is presented, along with descriptions of the modulation and control strategies. A dedicated control loop implements real-time monitoring of battery voltage and current on the secondary side, ensuring safe charging operation for OBC applications. The mathematical analysis and control strategy are validated through simulations and a 750 W small-scale experimental prototype.

  • Reduction of the Magnetic Volume of Three-Phase DC–DC Converter Associated With a Hybridge Rectifier Through Magnetic Integration

    by Robério Oliveira Rodrigues, Raimundo N. M. de Oliveira, José W. M. de Araújo, Luan Carlos dos Santos Mazza, Luiz Henrique Silva Colado Barreto, Demercil de S. Oliveira

    This article presents a method for reducing the overall magnetic volume of two isolated three-phase dc–dc converters by integrating their magnetic structures. The first topology comprises three single-phase transformers on the primary side and three filter inductors on the secondary side. In turn, the second topology structure includes three single-phase transformers, along with an interphase transformer. To accommodate the windings resulting from the integration process, a three-phase magnetic core is employed. Based on experimental data, the proposed integrated topology achieved a reduction in magnetic volume of $16.54\,\%$ and $12.68\,\%$ compared to the first and second structures, respectively. Furthermore, to limit the current ripple on the secondary side of the proposed integrated approach, a single filter inductor is incorporated into the converter’s output. Experimental results evidence various operational aspects of the proposed integrated topology, including zero-voltage switching and load limits, thermal performance data of the three-phase transformer under steady-state conditions, as well as efficiency curves with both experimental and theoretical data for an active power range of approximately $1\text{ kW}$ to $6\text{ kW}$.

  • Open Access

    A Bidirectional Isolated Integrated AC–DC Converter Based on an Interleaved 3-Level T-Type Power Converters

    by Welton da S. Lima, Luan Carlos dos S. Mazza, Gustavo A. de L. Henn, Dalton de A. Honorio, Paulo P. Praca, Demercil de S. Oliveira, Luiz Henrique S. C. Barreto

    This paper presents an integrated single-phase bidirectional ac–dc converter based on a dual-active-bridge (DAB) topology. The primary side is based on a multi-state switching cell (MSSC) with a T-type (TNPC) cell, which is composed of two three-level interleaved legs and coupled inductor, while the secondary side is a single-phase full-bridge (FB). Moreover, a comparative analysis between an isolated ac–dc converter with a neutral point clamped (NPC) converter on the primary side is presented. The basic converter operating principles and experimental results of a 850 W prototype are presented in order to validate the theoretical analysis. The control strategy is implemented on the TMS320F28379D DSP. The proposed topology achieves a maximum efficiency of 91.40% at 300 W output power, and 89.40% at rated power. From the experimental results, it can be stated that the converter based on the T-type topology is more efficient than the structure based on the NPC.


  • Four-Port, Single-Stage, Multidirectional AC–AC Converter for Solid-State Transformer Applications

    by Cicero Alisson dos Santos, Luan Carlos dos Santos Mazza, Fernando Lessa Tofoli, Demercil de Souza Oliveira Junior, Paulo Peixoto Praça, Fernando Luiz Marcelo Antunes

    Solid-state transformers (SSTs) have emerged as an interesting solution for replacing the traditional low-frequency transformers in power distribution systems owing to the capacity of performing ancillary services and providing the integration of multiple energy sources. This article proposes a four-port, single-phase, multidirectional ac–ac converter for SST applications. Considering the integration of conversion stages, it is possible to achieve higher efficiency and lower component count when compared with the typical three-stage topologies reported in the literature. The introduced structure is based on the interleaving concept associated with the well-known dual active bridge converter. The medium-voltage side employs a multilevel neutral-point-clamped converter. The voltages across the ac ports present five levels, whereas the operating frequency of the filter elements is twice the switching frequency. Experimental results are presented and thoroughly discussed to validate the theoretical assumptions.


  • A Three-Port Isolated Three-Phase Current-Fed DC–DC Converter Feasible to PV and Storage Energy System Connection on a DC Distribution Grid

    by Raimundo Nonato Moura de Oliveira, Luan Carlos dos Santos Mazza, Herminio Miguel de Oliveira Filho, Demercil de Souza Oliveira

    This paper presents a three-port three-phase current-fed dc-dc converter with high-frequency isolation and bidirectional power flow. Port I is fed by a battery bank, port II employs a set of photovoltaic (PV) modules and port III is connected to a dc link. The topology uses three single-phase H-bridge cells in the primary side and a three-phase H-bridge converter in the secondary one. High-frequency isolation is ensured by three single-phase transformers connected in an open delta-wye configuration. The theoretical analysis is performed considering the fundamental component of the voltage across the transformers. Maximum power point tracking (MPPT), the battery current and power flow between the primary and secondary sides are controlled by the use of variable duty cycle technique in the primary-side and the use of phase shift technique between the primary and secondary bridges. In order to validate the study, experimental results of the proposed system considering the dc rated voltages as 48V/96V/380V for Ports I/II/III, respectively, and rated power of 3.5 kW are carried out.


  • Open Access

    CONVERSOR BIDIRECIONAL COM TRÊS PORTAS APLICADO EM SISTEMAS AUTÔNOMOS E FOTOVOLTAICOS COM INTEGRAÇÃO A REDE ELÉTRICA c.c.

    by Antonio Neilton da Silva, Luan Carlos dos Santos Mazza, Deivid Matias de Freitas, Fernando Luiz Marcelo Antunes

    This article presents a study on the bi-directional DC-DC Converter with Dual Active Bridge Tri-State Switching cell for use in photovoltaic systems and battery bank. It is shown the proposed system for application, the converter operating principle, its ability to charge and discharge a battery bank with a combination of photovoltaic panels, and other features. This battery bank has a nominal voltage of 48 V, 4 photovoltaic panels are used with 31 V voltage each and the total rated power of 1.06 kW, feeding a DC bus 311 V with rated power of 2 kW. The control of power flow and voltage at the output can be obtained for two variables, the phase shift (phase shift - φ) between the fundamental voltages of the two bridges and the duty cycle (D) of the power switches. The results of dynamic response to convresor are shown operating with a duty cycle greater than 0.5 in loading rate discharge of the battery bank, the latter being simulated with a resistive load. It can see his natural ability to behave as a current source DC bus and photovoltaic O presente artigo realiza um estudo sobre o conversor c.c.-c.c. bidirecional Dual Active Bridge com Célula de Comutação de Três Estados para aplicação em sistemas fotovoltaicos e banco de baterias. Sendo mostrado o sistema proposto para aplicação, o princípio de funcionamento do conversor, a sua capacidade de carregar e descarregar um banco de baterias juntamente com uma associação de paineis fotovoltaicos, e outras características. Esse banco de baterias tem tensão nominal de 48 V ,são usados 4 painéis fotovoltaicos com tensão de 31 V cada e potência nominal total de 1,06 kW , alimentando um barramento c.c. de 311 V com potência nominal de 2 kW. O controle do fluxo de potência e da tensão na saída pode ser obtido por duas variáveis, o deslocamento de fase (phase-shift - φ) entre as tensões fundamentais das duas pontes e o ciclo de trabalho (D) dos interruptores de potência. São mostrados os resultados de resposta dinâmica para o conversor operando com uma razão cíclica maior que 0,5 em regime de carga e descarga do banco de baterias, sendo esse último simulado com uma carga resistiva. É possível observar sua capacidade natural de se comportar como fonte de corrente no barramento c.c. e nos painéis fotovoltaicos.

  • Open Access

    CONVERSOR CC-CC BIDIRECIONAL DAB COM CÉLULA DE COMUTAÇÃO DE TRÊS ESTADOS PARA APLICAÇÃO EM SISTEMAS FOTOVOLTAICOS

    by Luan Carlos dos Santos Mazza, Lucas Gomes de Sousa, Fábio José Lima Freire, Fernando Luiz Marcelo Antunes

    This article presents a study of a bidirectional DC-DC converter with Dual Active Bridge with Three-State Switching Cell for application in photovoltaic systems with battery bank. It is shown the application of the proposed system, the operating principle of the converter and its ability of charging and discharging a battery bank and other characteristics. This bank battery has a nominal voltage 48 V and feeds a 311 V DC bus with rated power 2 kW. It is explored all operation regions of the drive and, since the power flow and output voltage control can be realized by two variables, the phase shift (phase-shift - φ) between the fundamental tensions of the two bridges and the power switches duty cycle (D). The results of dynamic response in the three regions of the converter is also shown , as well as its natural ability to behave as a current source connected to the DC bus, the latter being simulated as a resistive load . O presente artigo realiza um estudo sobre o conversor CC-CC bidirecional Dual Active Bridge com Célula de Comutação de Três Estados para aplicação em sistemas fotovoltaicos com banco de baterias. Sendo mostrado o sistema proposto para aplicação, o princípio de funcionamento do conversor, a sua capacidade de carregar e descarregar um banco de baterias e outras características. Esse banco de baterias tem tensão nominal de 48 V e alimenta um barramento CC de 311 V com potência nominal de 2 kW. Nessa vertente são exploradas todas as regiões de operação do conversor e visto que o controle do fluxo de potência e da tensão na saída pode ser obtido por duas variáveis, o deslocamento de fase (phase-shift - φ) entre as tensões fundamentais das duas pontes e o ciclo de trabalho (D) dos interruptores de potência. Também são mostrados os resultados de resposta dinâmica nas três regiões do conversor, sendo possível verificar sua capacidade natural de se comportar como fonte de corrente na conexão ao barramento CC, sendo este último simulado como uma carga resistiva.