XLXian Liao

Xian Liao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xian Liao has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • An Improved Driving Power Supply Method for a Portable Electromagnetic Impact Source With a Short Acceleration Distance

    by Wei Wang, Xian Liao, Xinglin Lu, Jingjie He, Zhihong Fu

    Portable electromagnetic impact seismic sources, which use reluctance coil emission technology, have been partially applied in seismic engineering and geophysical exploration. This technology offers significant advantages in equipment stability and the simplicity of the electromechanical structure. However, the short acceleration distance inherent to their portable design limits the hammer's ability to achieve high ejection kinetic energy. In this study, a new driving power supply for the acceleration coil was enhanced and redesigned based on the previously established architecture. By leveraging the complementary advantages of commonly used driving power supplies (capacitor and battery), a method combining both for a time-sharing drive was proposed. The results of comparing and analyzing the output kinetic energy of the seismic source under five different driving power supply methods indicate that the ‘battery driven first, capacitor driven later’ outperforms ‘battery driven alone’, ‘capacitor driven first, battery driven later’ and ‘capacitor driven alone’, increasing the hammer's kinetic energy by 20.49%, 48.96%, and 109.23%, respectively. Based on an analysis of the reasons for these improvements, a scheme named ‘battery driven first, two capacitors driven later sequentially’ was proposed. Compared to ‘battery driven alone’, this scheme enhances the hammer's kinetic energy by 41.57%. The improved driving power supply significantly enhances the performance of the electromagnetic impact seismic sources, achieving an output kinetic energy of 1910.35 J.


  • A Simplified Transient Electromagnetic Device with Image Gradient-Driven Localization for Unexploded Ordnance Detection

    by Longhuan Liu, Xian Liao, Muyang Wu, Chao Yang, Litian Liang, Wei Liu, Zhengyu Xu, Zhihong Fu

    Transient electromagnetic (TEM) sensing is highly effective for unexploded ordnance (UXO) detection. To simplify the sensor array and accurately localize unexploded ordnance with varying deflection angles and offsets, this study develops a simplified TEM device integrated with an enhanced morphological gradient optimization (MGO) algorithm. Addressing the vulnerability of induction coils in traditional TEM small-loop systems to primary excitation magnetic field interference, an innovative orthogonal horizontal array coil structure is employed to receive secondary signals, and the coil layout is optimized through COMSOL modeling and multi-condition simulations, significantly enhancing the system's capability for stable recognition of UXO localization across diverse detection ranges and deflection angles. The MGO algorithm converts induction signals from horizontal array coils into four-pointed star image features for positioning and visualization, paired with a feature-point offset correction model constructed to achieve target positioning correction under different postures and detection ranges, which mitigates attitude and offset induced errors. Experimental results show the portable device achieves UXO localization with a maximum error of 5 cm when the target is beneath the device and 9 cm at the detection edge, and the device enables effective localization of UXO at various offset positions and deflection angles within the detection scope. This system features low-cost portability, with robust shallow-surface single UXO performance. This work provides a practical and simplified detection solution for rapid shallow unexploded ordnance detection.


  • A Three-Component Concentric Orthogonal Air-Core Coil Sensor

    by Longhuan Liu, Xian Liao, Muyang Wu, Zhihong Fu, Zhengyu Xu

    In this paper, to address the spatial structure constraints of existing three-component air-core coil sensors, a three-component concentric orthogonal air-core coil sensor consisting of circular coils and elliptical coil groups with equal areas is proposed. Firstly, the structural composition of the sensor is elaborated. By analyzing the mechanism through which coil electrical parameters affect spectral characteristics, the variation patterns of electrical parameters of circular coils and square coils under different deformation parameters are investigated, and the parameters of the elliptical coils are thus determined. Additionally, a comparative analysis of the performance of this sensor with that of three other coil structures is carried out. The analysis results show that the three components of CET coil after damping adjustment have similar bandwidth response, and the measurement error of the coil sensor is less than 5%, which is close to the ideal three component coil sensor. Moreover, its spatial measurement error is smaller than that of the cube coil, suggesting extensive prospects in the field of detection applications.


  • Top-hat feature accumulation-based localization algorithm for buried conductive grid topologies

    by Longhuan Liu, Wei Liu, Xian Liao, Muyang Wu, Xin Chen, Zhihong Fu

    The substation grounding grid, a shallow-buried mesh conductive structure, is critical for electrical equipment safety. Accurate topological identification and localization are key for detecting faults like conductor breakage or corrosion, but traditional electromagnetic methods suffer from interference in complex substation environments, reducing accuracy. This paper proposes an optimized topological feature calculation method. It first derives weak-signal characteristics in the weak excitation zone via surface magnetic induction amplitude analysis. Then, it evaluates the top-hat algorithm (an image processing tool for highlighting data features) for extracting topological features in weak-signal zones, and investigates the correlation between detection probe width, top-hat feature values, and localization accuracy. This optimized algorithm integrates multi-dimensional feature information to enhance topological feature saliency, improve precision, and suppress noise. Simulations show the method effectively identifies grounding grid topologies in noisy environments, outperforming traditional approaches, with substation field measurements yielding an average error of only 0.0694 m. This provides a new technical pathway for grounding grid topological detection.

  • Open Access

    The PSO-IFAH optimization algorithm for transient electromagnetic inversion

    by Zhengyu Xu, Guofeng Zhao, Xian Liao, Nengyi Fu

    As a non-contact method, the transient electromagnetic (TEM) method has the characteristics of high efficiency, small impact of device, no limitation of site range, and high resolution, and is a hot topic in current research. However, the research on the refined data processing method of TEM is lag, which seriously restricts the application in superficial engineering investigation and is a key problem that needs to be solved urgently. The particle swarm optimization (PSO) algorithm and firefly algorithm (FA) were successful swarm intelligence algorithms inspired by nature. However, the accuracy and efficiency of the algorithm restrict its further development. In this paper, the particle moving velocity of FA algorithm is defined according to the concept of particle moving velocity in PSO algorithm, so as to improve the local fast convergence ability of FA algorithm. On this basis, the appropriate velocity of particle movement is improved, so that the improved algorithm can overcome the oscillation problem around the optimal solution and improve the computational efficiency. And finally, an improved PSO-IFA hybrid optimization algorithm (PSO-IFAH) was proposed in the paper. The proposed algorithm can exploit the strong points of both PSO and FA algorithm mechanisms. A typical layered model was established, and the PSO algorithm, FA algorithm, and PSO-IFAH algorithm were applied to inversion calculations. The results show that the PSO-IFAH algorithm improves calculation accuracy by more than 80% and efficiency by over 60% compared to the PSO and FA algorithms, respectively. The PSO-IFAH algorithm also exhibits high inversion accuracy and stability, with superior anti-noise properties compared to the other algorithms. When implemented in ground TEM measurement data processing, the PSO-IFAH algorithm enhances the resolution of anomalies and low-resistance details, aligning well with actual excavation results. This highlights the algorithm’s capability to depict underground electrical structures and karst developments accurately, thereby improving the precision of TEM data processing and interpretation.


  • Open Access

    Electromagnetic Detection System with Magnetic Dipole Source for Near-Surface Detection

    by Xian Liao, Zhengyu Xu, Wei Liu, Heng-Ming Tai, Jie Zhou, Xiao Ma, Zhihong Fu

    This paper proposes a nondestructive, separate transmitter-receiver (TX-RX) electromagnetic measurement system for near-surface detection. Different from the traditional dual-coil integrated design, the proposed transient electromagnetic (TEM) system performs shallow subsurface detection using independent TX coil and movable RX coils. This configuration requires a large primary field so that the far-away secondary field is able to generate reliably induced voltages. To achieve this goal, a bipolar current-pulsed power supply (BCPPS) with a late resonant charging strategy is designed to produce a sufficiently large magnetic moment for the exciting coil with low source interference. The magnetic dipole source (MDS) with a large proportion of weight is separated from the field observation device and does not need to be dragged or transported during the detection process. This setup lowers the weight of the scanning device to 3 kg and greatly improves the measurement efficiency. The results of the laboratory test verify the effectiveness of the separate MDS and RX module system. Field experimental detection further demonstrates that the proposed system can realize highly efficient and shallow surface detection within a 200 m range of the MDS device.


  • Open Access

    Influence of Parasitic Capacitance on Turn-Off Current and Its Optimization Method for Transient Electromagnetic System

    by Xian Liao, Zhengyu Xu, Wei Liu, Xuquan Hu, Jie Zhou, Zhihong Fu

    In transient electromagnetic (TEM) inverter circuits, a damping resistor is typically connected in parallel to the transmitting coil to prevent overshoot during the turn-off period of the pulse current. This configuration results in an exponential decay waveform for the pulse current, which prolongs the turn-off time and increases the nonlinear error. This article analyzes the impact of the parasitic capacitance on the value of the damping resistor and the end-period waveform of the pulse current base on the inverter circuits, and proposes an optimized control method to reduce both the turn-off time and the nonlinear error of the pulse current. The method is validated through the construction of an experimental circuit. According to the experimental data, this optimization method reduces the turn-off time by 23.8% and the nonlinear error by 5.5%. In the unexploded ordnance (UXO) detection experiment, the optimization method’s detection results exhibit higher resolution.


  • Research on Small-Loop Transient Electromagnetic Method Forward and Nonlinear Optimization Inversion Method

    by Zhengyu Xu, Xian Liao, Longhuan Liu, Nengyi Fu, Zhihong Fu

    The small-loop transient electromagnetic (TEM) method has great application prospects in shallow surface geophysical exploration. However, the theoretical research on the forward and inversion of this method is obviously lagging behind, which seriously affects the application effect in practical engineering. For the oscillation problem of the small-loop TEM response calculated by using the forward theory of the conventional TEM methods, the dipole integral superposition method was proposed to solve the problem in this paper. The transmitter source is divided into an infinite number of electric dipoles, and the calculation expressions of the electromagnetic field components satisfied by the electric dipoles are deduced, and the forward calculation problem of the layered model of the small-loop TEM method is solved. For the small-loop TEM method inversion problem, the simulated annealing (SA) method was presented for inversion calculation in this paper. First, the influence of the selection of the initial temperature on the inversion result of the SA algorithm was analyzed. Then, we demonstrate the algorithm’s flexibility by choosing different initial models and search ranges and concluded that the different initial models and search ranges don’t affect the inversion results of the SA algorithm. Next, the typical layered models were established and the SA algorithm was used to carry out calculations. The research results show that the SA algorithm is an excellent global optimization algorithm, which can easily jump out of the local minima and converge to the global minima. Finally, we processed the measured data through inversion calculations and compared it with the results of the other three methods to verify the effectiveness and accuracy of the SA algorithm for small-loop TEM data processing. The research content solves the theoretical problem of the small-loop TEM method forward and inversion, promotes the development of the small-loop TEM method technology, and objectively and effectively solves practical engineering application problems.


  • Open Access

    Tunnel Concealed Karst Cave Joint Detection by Tunnel Seismic and Transient Electromagnetic

    by Xinglin Lu, Xuquan Hu, Zhengyu Xu, Xian Liao, Longhuan Liu, Zhihong Fu

    The water-rich giant karst cave is the risk source of tunnel construction in the karst area. To reduce the risk of tunnel construction, it is necessary to accurately explore the spatial distribution range of the karst cave in the direction of advance and both sides of the tunnel. Reflection seismic and transient electromagnetic (TEM) are the primary geophysical tools for tunnel advanced prediction; they have strengths and weaknesses. The tunnel seismic can only describe the boundary interface between cave bodies and surrounding rock in the direction of advance. Although the TEM method can detect the spatial distribution range of cave bodies, the inversion results depend on the initial resistivity model. The single method is insufficient to describe the spatial distribution of cave bodies. To overcome the shortcoming of a single method, we developed tunnel seismic and TEM joint detection of karst cavern and established a complete data processing flow. The tunnel seismic migration profiles can describe the interface between the karst cave and surrounding rock in the direction of advance. We put forward a reasonable initial model: (1) the layer’s thicknesses are determined by the impedance interface from the tunnel migration data; (2) the initial resistivity values are determined from the pilot hole and prior geological data. Comparison of the inversion results of different initial models of tunnel face horizontal line data proves that the proposed initial model method can reduce multisolution, save calculation time, and improve inversion accuracy. The multidirectional TEM inversion profiles can describe the spatial distribution of the giant cave. Combined with the results of tunnel seismic and TEM, the interpretation errors can be reduced and the extension of the karst cave can be delineated. Later excavation results also verify the accuracy of the prediction results.


  • A Bipolar Current-Pulsed Power Supply With Dual-Pulse Energy Boosting for Shallow Electromagnetic Detection

    by Wei Liu, Xuquan Hu, Xian Liao, Longhuan Liu, Zhihong Fu

    This article presents a novel design of a bipolar current-pulsed power supply (BCPPS) for shallow electromagnetic detection. Problems of acquiring current pulses with low oscillation and low energy cost are analyzed in detail and relevant solutions are given. An improved topology based on a constant-voltage clamping circuit is proposed to satisfy the demands of supplying the highly inductive load. The relationship between the main steady-state parameters of the proposed BCPPS is provided and the shape of current pulses can be adjusted flexibly by changing the duty cycles of the switching signals in the topology. A feedforward control strategy to realize constant-current transmitting is proposed and the digital controller is designed. Compared with different existing current-pulsed sources, the topology in this article is characterized by high repeat frequency, low energy cost, and low switching interference. A laboratory prototype with a maximum peak current of 50 A and repeat frequency of 500 Hz is built to verify the effectiveness of the proposed topology.