Longhuan Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Longhuan Liu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Zhihong Fu
School of Electrical Engineering, Chongqing University, Chongqing 400044, China
7 shared publications - Xian Liao
School of Electrical Engineering, Chongqing University, Chongqing, China
6 shared publications - Wei Liu
Professional Technology Center, Chongqing Electric Power Company Electric Power Science Research Institute, Chongqing 401123, China
3 shared publications - Zhengyu Xu
School of Electrical Engineering, Chongqing University, Chongqing 400044, China
3 shared publications - Muyang Wu
School of Electrical Engineering, Chongqing University, Chongqing 400044, People’s Republic of China
2 shared publications - Xuquan Hu
University of Tulsa
2 shared publications
Latest Publications
- 5 February 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (6)
A Simplified Transient Electromagnetic Device with Image Gradient-Driven Localization for Unexploded Ordnance Detection
Transient electromagnetic (TEM) sensing is highly effective for unexploded ordnance (UXO) detection. To simplify the sensor array and accurately localize unexploded ordnance with varying deflection angles and offsets, this study develops a simplified TEM device integrated with an enhanced morphological gradient optimization (MGO) algorithm. Addressing the vulnerability of induction coils in traditional TEM small-loop systems to primary excitation magnetic field interference, an innovative orthogonal horizontal array coil structure is employed to receive secondary signals, and the coil layout is optimized through COMSOL modeling and multi-condition simulations, significantly enhancing the system's capability for stable recognition of UXO localization across diverse detection ranges and deflection angles. The MGO algorithm converts induction signals from horizontal array coils into four-pointed star image features for positioning and visualization, paired with a feature-point offset correction model constructed to achieve target positioning correction under different postures and detection ranges, which mitigates attitude and offset induced errors. Experimental results show the portable device achieves UXO localization with a maximum error of 5 cm when the target is beneath the device and 9 cm at the detection edge, and the device enables effective localization of UXO at various offset positions and deflection angles within the detection scope. This system features low-cost portability, with robust shallow-surface single UXO performance. This work provides a practical and simplified detection solution for rapid shallow unexploded ordnance detection.
- 5 February 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (6)
A Simplified Transient Electromagnetic Device with Image Gradient-Driven Localization for Unexploded Ordnance Detection
Transient electromagnetic (TEM) sensing is highly effective for unexploded ordnance (UXO) detection. To simplify the sensor array and accurately localize unexploded ordnance with varying deflection angles and offsets, this study develops a simplified TEM device integrated with an enhanced morphological gradient optimization (MGO) algorithm. Addressing the vulnerability of induction coils in traditional TEM small-loop systems to primary excitation magnetic field interference, an innovative orthogonal horizontal array coil structure is employed to receive secondary signals, and the coil layout is optimized through COMSOL modeling and multi-condition simulations, significantly enhancing the system's capability for stable recognition of UXO localization across diverse detection ranges and deflection angles. The MGO algorithm converts induction signals from horizontal array coils into four-pointed star image features for positioning and visualization, paired with a feature-point offset correction model constructed to achieve target positioning correction under different postures and detection ranges, which mitigates attitude and offset induced errors. Experimental results show the portable device achieves UXO localization with a maximum error of 5 cm when the target is beneath the device and 9 cm at the detection edge, and the device enables effective localization of UXO at various offset positions and deflection angles within the detection scope. This system features low-cost portability, with robust shallow-surface single UXO performance. This work provides a practical and simplified detection solution for rapid shallow unexploded ordnance detection.
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (22) , 41963-41971
A Three-Component Concentric Orthogonal Air-Core Coil Sensor
In this paper, to address the spatial structure constraints of existing three-component air-core coil sensors, a three-component concentric orthogonal air-core coil sensor consisting of circular coils and elliptical coil groups with equal areas is proposed. Firstly, the structural composition of the sensor is elaborated. By analyzing the mechanism through which coil electrical parameters affect spectral characteristics, the variation patterns of electrical parameters of circular coils and square coils under different deformation parameters are investigated, and the parameters of the elliptical coils are thus determined. Additionally, a comparative analysis of the performance of this sensor with that of three other coil structures is carried out. The analysis results show that the three components of CET coil after damping adjustment have similar bandwidth response, and the measurement error of the coil sensor is less than 5%, which is close to the ideal three component coil sensor. Moreover, its spatial measurement error is smaller than that of the cube coil, suggesting extensive prospects in the field of detection applications.
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (22) , 41963-41971
A Three-Component Concentric Orthogonal Air-Core Coil Sensor
In this paper, to address the spatial structure constraints of existing three-component air-core coil sensors, a three-component concentric orthogonal air-core coil sensor consisting of circular coils and elliptical coil groups with equal areas is proposed. Firstly, the structural composition of the sensor is elaborated. By analyzing the mechanism through which coil electrical parameters affect spectral characteristics, the variation patterns of electrical parameters of circular coils and square coils under different deformation parameters are investigated, and the parameters of the elliptical coils are thus determined. Additionally, a comparative analysis of the performance of this sensor with that of three other coil structures is carried out. The analysis results show that the three components of CET coil after damping adjustment have similar bandwidth response, and the measurement error of the coil sensor is less than 5%, which is close to the ideal three component coil sensor. Moreover, its spatial measurement error is smaller than that of the cube coil, suggesting extensive prospects in the field of detection applications.
- 1 September 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (9) , 096002
Top-hat feature accumulation-based localization algorithm for buried conductive grid topologies
The substation grounding grid, a shallow-buried mesh conductive structure, is critical for electrical equipment safety. Accurate topological identification and localization are key for detecting faults like conductor breakage or corrosion, but traditional electromagnetic methods suffer from interference in complex substation environments, reducing accuracy. This paper proposes an optimized topological feature calculation method. It first derives weak-signal characteristics in the weak excitation zone via surface magnetic induction amplitude analysis. Then, it evaluates the top-hat algorithm (an image processing tool for highlighting data features) for extracting topological features in weak-signal zones, and investigates the correlation between detection probe width, top-hat feature values, and localization accuracy. This optimized algorithm integrates multi-dimensional feature information to enhance topological feature saliency, improve precision, and suppress noise. Simulations show the method effectively identifies grounding grid topologies in noisy environments, outperforming traditional approaches, with substation field measurements yielding an average error of only 0.0694 m. This provides a new technical pathway for grounding grid topological detection.
- 1 September 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (9) , 096002
Top-hat feature accumulation-based localization algorithm for buried conductive grid topologies
The substation grounding grid, a shallow-buried mesh conductive structure, is critical for electrical equipment safety. Accurate topological identification and localization are key for detecting faults like conductor breakage or corrosion, but traditional electromagnetic methods suffer from interference in complex substation environments, reducing accuracy. This paper proposes an optimized topological feature calculation method. It first derives weak-signal characteristics in the weak excitation zone via surface magnetic induction amplitude analysis. Then, it evaluates the top-hat algorithm (an image processing tool for highlighting data features) for extracting topological features in weak-signal zones, and investigates the correlation between detection probe width, top-hat feature values, and localization accuracy. This optimized algorithm integrates multi-dimensional feature information to enhance topological feature saliency, improve precision, and suppress noise. Simulations show the method effectively identifies grounding grid topologies in noisy environments, outperforming traditional approaches, with substation field measurements yielding an average error of only 0.0694 m. This provides a new technical pathway for grounding grid topological detection.
- Open Access
- 29 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 60876-60882
Accumulative Imaging Method of Grounding Grid Topological Features Based on Combined Sources
One essential requirement for grounding grid state detection is quick and accurate localization of the topology. The combined source detection approach works well for increasing the signal amplitude and detection efficiency inside large grounding grids. However, the presence of bypass branch currents and grounding grid breakpoints causes variations in the location calculated by the peak approach during tiny grounding grid topology detection. The magnetic field superposition method under the excitation mode of multiple sources exacerbates this positioning error. This paper presents a topological feature accumulation imaging method designed for combined sources to address this problem. The proposed approach examines the effect of the bias in the surrounding branch current amplitudes on topological localization by utilizing the concepts of electromagnetic induction. The factors contributing to increased topological localization errors were examined by investigating the relationship between the superposition effect of the surface magnetic induction strength and localization error under different combined excitations, particularly in the context of breakpoints in the grounding grid topology. The proposed method uses the top-hat algorithm to extract top-hat features of the amplitude of the surface magnetic induction intensity under every type of excitation. Top-hat eigenvalue accumulation was used to reduce topological localization offsets by mitigating superfluous signals. The advantage of this method over conventional processing approaches is demonstrated by simulations and test field experiments, which show enhanced accuracy in combined source topological localization for small grounding grids.
- 29 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 60876-60882
Open AccessAccumulative Imaging Method of Grounding Grid Topological Features Based on Combined Sources
One essential requirement for grounding grid state detection is quick and accurate localization of the topology. The combined source detection approach works well for increasing the signal amplitude and detection efficiency inside large grounding grids. However, the presence of bypass branch currents and grounding grid breakpoints causes variations in the location calculated by the peak approach during tiny grounding grid topology detection. The magnetic field superposition method under the excitation mode of multiple sources exacerbates this positioning error. This paper presents a topological feature accumulation imaging method designed for combined sources to address this problem. The proposed approach examines the effect of the bias in the surrounding branch current amplitudes on topological localization by utilizing the concepts of electromagnetic induction. The factors contributing to increased topological localization errors were examined by investigating the relationship between the superposition effect of the surface magnetic induction strength and localization error under different combined excitations, particularly in the context of breakpoints in the grounding grid topology. The proposed method uses the top-hat algorithm to extract top-hat features of the amplitude of the surface magnetic induction intensity under every type of excitation. Top-hat eigenvalue accumulation was used to reduce topological localization offsets by mitigating superfluous signals. The advantage of this method over conventional processing approaches is demonstrated by simulations and test field experiments, which show enhanced accuracy in combined source topological localization for small grounding grids.
- Open Access
- 12 May 2022
- Published by GeoScienceWorld in Lithosphere
- Vol. 2022 (1)
Tunnel Concealed Karst Cave Joint Detection by Tunnel Seismic and Transient Electromagnetic
The water-rich giant karst cave is the risk source of tunnel construction in the karst area. To reduce the risk of tunnel construction, it is necessary to accurately explore the spatial distribution range of the karst cave in the direction of advance and both sides of the tunnel. Reflection seismic and transient electromagnetic (TEM) are the primary geophysical tools for tunnel advanced prediction; they have strengths and weaknesses. The tunnel seismic can only describe the boundary interface between cave bodies and surrounding rock in the direction of advance. Although the TEM method can detect the spatial distribution range of cave bodies, the inversion results depend on the initial resistivity model. The single method is insufficient to describe the spatial distribution of cave bodies. To overcome the shortcoming of a single method, we developed tunnel seismic and TEM joint detection of karst cavern and established a complete data processing flow. The tunnel seismic migration profiles can describe the interface between the karst cave and surrounding rock in the direction of advance. We put forward a reasonable initial model: (1) the layer’s thicknesses are determined by the impedance interface from the tunnel migration data; (2) the initial resistivity values are determined from the pilot hole and prior geological data. Comparison of the inversion results of different initial models of tunnel face horizontal line data proves that the proposed initial model method can reduce multisolution, save calculation time, and improve inversion accuracy. The multidirectional TEM inversion profiles can describe the spatial distribution of the giant cave. Combined with the results of tunnel seismic and TEM, the interpretation errors can be reduced and the extension of the karst cave can be delineated. Later excavation results also verify the accuracy of the prediction results.
- 12 May 2022
- Published by GeoScienceWorld in Lithosphere
- Vol. 2022 (1)
Open AccessTunnel Concealed Karst Cave Joint Detection by Tunnel Seismic and Transient Electromagnetic
The water-rich giant karst cave is the risk source of tunnel construction in the karst area. To reduce the risk of tunnel construction, it is necessary to accurately explore the spatial distribution range of the karst cave in the direction of advance and both sides of the tunnel. Reflection seismic and transient electromagnetic (TEM) are the primary geophysical tools for tunnel advanced prediction; they have strengths and weaknesses. The tunnel seismic can only describe the boundary interface between cave bodies and surrounding rock in the direction of advance. Although the TEM method can detect the spatial distribution range of cave bodies, the inversion results depend on the initial resistivity model. The single method is insufficient to describe the spatial distribution of cave bodies. To overcome the shortcoming of a single method, we developed tunnel seismic and TEM joint detection of karst cavern and established a complete data processing flow. The tunnel seismic migration profiles can describe the interface between the karst cave and surrounding rock in the direction of advance. We put forward a reasonable initial model: (1) the layer’s thicknesses are determined by the impedance interface from the tunnel migration data; (2) the initial resistivity values are determined from the pilot hole and prior geological data. Comparison of the inversion results of different initial models of tunnel face horizontal line data proves that the proposed initial model method can reduce multisolution, save calculation time, and improve inversion accuracy. The multidirectional TEM inversion profiles can describe the spatial distribution of the giant cave. Combined with the results of tunnel seismic and TEM, the interpretation errors can be reduced and the extension of the karst cave can be delineated. Later excavation results also verify the accuracy of the prediction results.
- Open Access
A Novel Pulsed Eddy Current Criterion for Non-Ferromagnetic Metal Thickness Quantifications under Large Liftoff
The pulsed eddy current (PEC) inspection is considered a versatile non-destructive evaluation technique, and it is widely used in metal thickness quantifications for structural health monitoring and target recognition. However, for non-ferromagnetic conductors covered with non-uniform thick insulating layers, there are still deficiencies in the current schemes. The main purpose of this study is to find an effective feature, to measure wall thinning under the large lift-off variations, and further expand application of the PEC technology. Therefore, a novel method named the dynamic apparent time constant (D-ATC) is proposed based on the coil-coupling model. It associates the dynamic behavior of the induced eddy current with the geometric dimensions of the non-ferromagnetic metallic component by the time and amplitude features of the D-ATC curve. Numeral calculations and experiments show that the time signature is immune to large lift-off variations.
Open AccessA Novel Pulsed Eddy Current Criterion for Non-Ferromagnetic Metal Thickness Quantifications under Large Liftoff
The pulsed eddy current (PEC) inspection is considered a versatile non-destructive evaluation technique, and it is widely used in metal thickness quantifications for structural health monitoring and target recognition. However, for non-ferromagnetic conductors covered with non-uniform thick insulating layers, there are still deficiencies in the current schemes. The main purpose of this study is to find an effective feature, to measure wall thinning under the large lift-off variations, and further expand application of the PEC technology. Therefore, a novel method named the dynamic apparent time constant (D-ATC) is proposed based on the coil-coupling model. It associates the dynamic behavior of the induced eddy current with the geometric dimensions of the non-ferromagnetic metallic component by the time and amplitude features of the D-ATC curve. Numeral calculations and experiments show that the time signature is immune to large lift-off variations.
- 20 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (3) , 2684-2693
A Bipolar Current-Pulsed Power Supply With Dual-Pulse Energy Boosting for Shallow Electromagnetic Detection
This article presents a novel design of a bipolar current-pulsed power supply (BCPPS) for shallow electromagnetic detection. Problems of acquiring current pulses with low oscillation and low energy cost are analyzed in detail and relevant solutions are given. An improved topology based on a constant-voltage clamping circuit is proposed to satisfy the demands of supplying the highly inductive load. The relationship between the main steady-state parameters of the proposed BCPPS is provided and the shape of current pulses can be adjusted flexibly by changing the duty cycles of the switching signals in the topology. A feedforward control strategy to realize constant-current transmitting is proposed and the digital controller is designed. Compared with different existing current-pulsed sources, the topology in this article is characterized by high repeat frequency, low energy cost, and low switching interference. A laboratory prototype with a maximum peak current of 50 A and repeat frequency of 500 Hz is built to verify the effectiveness of the proposed topology.
- 20 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (3) , 2684-2693
A Bipolar Current-Pulsed Power Supply With Dual-Pulse Energy Boosting for Shallow Electromagnetic Detection
This article presents a novel design of a bipolar current-pulsed power supply (BCPPS) for shallow electromagnetic detection. Problems of acquiring current pulses with low oscillation and low energy cost are analyzed in detail and relevant solutions are given. An improved topology based on a constant-voltage clamping circuit is proposed to satisfy the demands of supplying the highly inductive load. The relationship between the main steady-state parameters of the proposed BCPPS is provided and the shape of current pulses can be adjusted flexibly by changing the duty cycles of the switching signals in the topology. A feedforward control strategy to realize constant-current transmitting is proposed and the digital controller is designed. Compared with different existing current-pulsed sources, the topology in this article is characterized by high repeat frequency, low energy cost, and low switching interference. A laboratory prototype with a maximum peak current of 50 A and repeat frequency of 500 Hz is built to verify the effectiveness of the proposed topology.
- Open Access
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 671 (1) , 012024
Detection Capability and Application Analysis of the Small-Loop Transient Electromagnetic Method
When working in the areas with strong interference and limited sites, such as cities, dams, and mountainous areas, using the conventional transient electromagnetic (TEM) devices is difficult to lay out large transmitter loops for conventional surveys. The small-loop transient electromagnetic method, which has the advantages of lightweight and high efficiency, is a new technology of current researches. First of all, A one-dimensional (1-D) layered model and a three-dimensional (3-D) homogeneous half-space model were established by using numerical simulation method. The research results show that the small-loop TEM devices can not only accurately reflect the anomaly information of deep targets, but also be more sensitive to the detection of shallow targets. By using high-current technology, the signal intensity and detection depth of multi-turn small-loop TEM devices and that of large loop device are the same. Finally, the accuracy and effectiveness of small-loop devices were verified through analysing the results of dam karst investigation. The research work provides a reference for the qualitative analysis of response characteristics and data interpretation of small-loop TEM.
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 671 (1) , 012024
Open AccessDetection Capability and Application Analysis of the Small-Loop Transient Electromagnetic Method
When working in the areas with strong interference and limited sites, such as cities, dams, and mountainous areas, using the conventional transient electromagnetic (TEM) devices is difficult to lay out large transmitter loops for conventional surveys. The small-loop transient electromagnetic method, which has the advantages of lightweight and high efficiency, is a new technology of current researches. First of all, A one-dimensional (1-D) layered model and a three-dimensional (3-D) homogeneous half-space model were established by using numerical simulation method. The research results show that the small-loop TEM devices can not only accurately reflect the anomaly information of deep targets, but also be more sensitive to the detection of shallow targets. By using high-current technology, the signal intensity and detection depth of multi-turn small-loop TEM devices and that of large loop device are the same. Finally, the accuracy and effectiveness of small-loop devices were verified through analysing the results of dam karst investigation. The research work provides a reference for the qualitative analysis of response characteristics and data interpretation of small-loop TEM.