MKMurat Kassymzhanov

Murat Kassymzhanov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Murat Kassymzhanov has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Tritium Dynamics in the Soil–Plant–Atmosphere System of the Shagan River at the Semipalatinsk Test Site

    by Andrei Mikhailov, Sergey Lukashenko, Ekaterina Fedunova, Andrei Thomson, Murat Kassymzhanov, Symbat Baigazy, Nurlan Mukhamediarov, Medet Aktaev, Aray Temirzhanova, Almagul Mukhamediarova, et al.

    This study investigated tritium distribution in river water, soil moisture, vegetation, and atmospheric and soil-air water vapor in a Shagan River section approximately 5 km downstream of Atomic Lake at the Semipalatinsk Test Site. Samples were collected from sites on both riverbanks, including soil depth profiles and diurnal water-vapor observations. Tritium activity was measured by liquid scintillation spectrometry. River water activity differed between the left and right banks (13,700 and 2300 Bq/L, respectively). At a left-bank site 30 m from the river, soil-water tritium increased with depth from 2600 to 53,300 Bq/L, whereas lower activities were found at more distant sites. Tritium in plant tissue free water varied considerably by sampling location and plant part, reaching 69,600 Bq/L in leaves and 76,100 Bq/L in stems at the most contaminated site. Diurnal patterns were observed in atmospheric and soil-air water vapor. These results indicate spatially heterogeneous tritium transfer within the riparian ecosystem and suggest that groundwater discharge, soil moisture dynamics, and plant-water interactions contribute to its redistribution.

  • Open Access

    Electron-Beam Radiation Crosslinking as a Route for Upgrading Recycled Polyethylene for Circular Economy Applications

    by Lyazat Tolymbekova, Gaini Seitenova, Aiymzhan Kazbekova, Aisha Baktybek, Murat Kassymzhanov, Eldar Kopishev, Zarina Yelemessova

    The growing demand for polymer recycling requires effective approaches to improve the performance of recycled materials and expand their practical applications. In this study, electron-beam irradiation was investigated as a method for modifying recycled polyethylene obtained from façade-fastening elements. Virgin PE-80 polyethylene was used as a reference material for comparison. Irradiation was carried out using an ILU-10 electron accelerator (5 MeV) at doses of 95–125 kGy. Structural, morphological, elemental, thermal, crosslinking, and mechanical characteristics were evaluated using FTIR spectroscopy, SEM/EDS analysis, differential scanning calorimetry (DSC), gel fraction determination, and tensile testing according to ISO 527. The results showed that irradiation promotes the formation of a crosslinked network structure in both materials, as confirmed by the increase in gel fraction with increasing dose. For recycled polyethylene, gel fraction values increased from 46.7 to 56.2%, indicating effective radiation-induced crosslinking despite the structural heterogeneity of the material. FTIR analysis revealed the formation of oxygen-containing functional groups associated with radiation-induced oxidation, which was more pronounced in recycled polyethylene due to the presence of pre-existing defects and degradation products. SEM observations revealed increased surface roughness and localized fibrillar features after irradiation, while DSC analysis indicated a decrease in the crystallinity of recycled polyethylene associated with radiation-induced crosslinking and restricted molecular chain rearrangement. Mechanical testing showed an increase in tensile strength and elastic modulus accompanied by a reduction in elongation at break. Among the investigated irradiation doses, 110 kGy provided the most favorable balance between crosslinking efficiency and preservation of structural integrity. These findings demonstrate that electron-beam irradiation is an effective strategy for upgrading recycled polyethylene by improving its mechanical performance while maintaining structural integrity, thereby expanding its potential for reuse in circular economy applications.

  • Open Access

    Surface Modification of Polyethylene Terephthalate Track-Etched Membranes by 2,2,3,3,4,4,5,5,6,6,7,7-Dodecafluoroheptyl Acrylate for Application in Water Desalination by Direct Contact Membrane Distillation

    by Aigerim Kh. Shakayeva, Arman B. Yeszhanov, Alexander N. Borissenko, Murat T. Kassymzhanov, Ainash T. Zhumazhanova, Nikolai A. Khlebnikov, A. K. Nurkassimov, Maxim V. Zdorovets, Olgun Güven, Ilya V. Korolkov

    In this work, the surfaces of poly (ethylene terephthalate) track-etched membranes (PET TeMs) with pore sizes of 670–1310 nm were hydrophobized with 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl acrylate (DFHA) by photoinitiated graft polymerization. Attenuated total reflection FTIR spectroscopy (ATR-FTIR), scanning electron microscopy (SEM) coupled to an energy-dispersive X-ray spectrometer (EDX), and contact angle measurements were used to identify and characterize the TeMs. The optimal parameters for graft polymerization were determined as follows: polymerization time of 60 min, monomer concentration of 30%, and distance from the UV source of 7 cm. The water contact angle of the modified membranes reached 97°, which is 51° for pristine membranes. The modified membranes were tested for water desalination using direct contact membrane distillation (DCMD) method. The effects of membrane pore size, the degree of grafting, and salt concentration on the performance of membrane distillation process were investigated. According to the results obtained, it has been concluded that large pore size hydrophobic TeMs modified by using DFHA could be used for desalinating water.


  • Open Access

    Surface Modification of Polyethylene Terephthalate Track-Etched Membranes by 2,2,3,3,4,4,5,5,6,6,7,7- Dodecafluoroheptyl Acrylate for Application in Water Desalination by Direct Contact Membrane Distillation

    by Aigerim Kh. Shakayeva, Arman B. Yeszhanov, Alexander N. Borissenko, Murat T. Kassymzhanov, Ainash T. Zhumazhanova, Nikolai A. Khlebnikov, A. K. Nurkassimov, Maxim V. Zdorovets, Olgun Güven, Ilya V. Korolkov

    In this work, the surface of poly(ethylene terephthalate) track-etched membranes (PET TeMs) with pore sizes of 670-1310 nm was hydrophobized with 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl acrylate (DFHA) by photoinitiated graft polymerization. Attenuated total reflection FTIR spec-troscopy (ATR-FTIR), scanning electron microscopy (SEM) coupled to an energy-dispersive X-ray spectrometer (EDX), and contact angle measurement were used to identify and characterize the TeMs. The optimal parameters for graft polymerization were determined as follows: polymeriza-tion time 60 min, monomer concentration of 30% and distance from the UV-source 7 cm. The wa-ter contact angle of the modified membranes reached 97° which is 51o for pristine membranes. The modified membranes were tested for water desalination using direct contact membrane distillation (DCMD) method. The effect of membrane pore size, the degree of grafting and salt concentration on the performance of membrane distillation process was investigated. According to the results obtained, it has been concluded that large pore size hydrophobic TeMs modified by using DFHA could be used for desalinating water.


  • Open Access

    Electron Beam Induced Enhancement of the Catalytic Properties of Ion-Track Membranes Supported Copper Nanotubes in the Reaction of the P-Nitrophenol Reduction

    by Anastassiya A. Mashentseva, Dmitriy I. Shlimas, Artem L. Kozlovskiy, Maxim V. Zdorovets, Alyona V. Russakova, Murat Kassymzhanov, Alexander N. Borisenko

    This study considers the effect of various doses of electron irradiation on the crystal structure and properties of composite catalysts based on polyethylene terephthalate track-etched membranes and copper nanotubes. Copper nanotubes were obtained by electroless template synthesis and irradiated with electrons with 3.8 MeV energy in the dose range of 100–250 kGy in increments of 50 kGy. The original and irradiated samples of composites were investigated by X-ray diffraction technique (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The improved catalytic activity of composite membranes with copper nanotubes was demonstrated by the example of the reduction reaction of p-nitrophenol in the presence of sodium borohydride. Irradiation with electrons at doses of 100 and 150 kGy led to reaction rate constant increases by 35 and 59%, respectively, compared to the non-irradiated sample. This enhancing catalytic activity could be attributed to the changing of the crystallite size of copper, as well as the surface roughness of the composite membrane.