Mykola Mytko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mykola Mytko has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Serhii Burlaka
Vinnytsia National Agrarian University
7 shared publications - Oleksii Tokarchuk
Vinnytsia National Agrarian University
2 shared publications - Tetiana Boretska
Vinnytsia National Agrarian University
2 shared publications - Y Savin2 shared publications
A.P. Polyvianchuk
1 shared publication- A.V. Dmitrieva1 shared publication
Latest Publications
- Open Access
- 28 February 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (1(87)) , 38-43
Development of universal model for optimizing parking spaces in complex geometric configurations
The object of research is the process of designing and optimizing parking areas in complex geometric configurations in conditions of dense development. The main problem is to solve the use of areas of complex geometric configuration for parking areas. In addition, there are currently no universal models and methods for the corresponding calculation and optimization. The result of the work was the receipt of a universal mathematical model with which it is possible to determine the number of parking spaces based on the geometric dimensions and area of the plot. A special feature is the possibility of calculating for complex geometric configurations (polygons). For this, the Gauss formula and the JavaScript programming language are used. The initial data are geodetic measurements, and the error in such a calculation is less than 2%. The development of JavaScript code based on the shoelace formula was practical importance. The experimental object was the residential area “Vyshenka” in Vinnytsia (Ukraine). The selected plot has an area of 1350 m2 with an initial number of parking spaces before optimization –50, after –59. In general, the efficiency of using the area increased from 70% to 88%. In addition, a 22% reduction in accidents is noted, which indicates the significant effectiveness of the model and minimal calculation error. A feature of the proposed solution is also that not only linear dimensions are taken into account, but also the relief, infrastructure facilities and the initial shape of the site. There is also the possibility of integration into web applications and CAD programs for simultaneous planning and construction, which allows for an increase in the number of parking spaces of up to 20% without expanding the territories. The results of the modeling can be used by engineers and builders to improve the landscaping of residential areas where there is no possibility for expanding the territories, programmers – by integrating the model into web applications and business.
- 28 February 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (1(87)) , 38-43
Open AccessDevelopment of universal model for optimizing parking spaces in complex geometric configurations
The object of research is the process of designing and optimizing parking areas in complex geometric configurations in conditions of dense development. The main problem is to solve the use of areas of complex geometric configuration for parking areas. In addition, there are currently no universal models and methods for the corresponding calculation and optimization. The result of the work was the receipt of a universal mathematical model with which it is possible to determine the number of parking spaces based on the geometric dimensions and area of the plot. A special feature is the possibility of calculating for complex geometric configurations (polygons). For this, the Gauss formula and the JavaScript programming language are used. The initial data are geodetic measurements, and the error in such a calculation is less than 2%. The development of JavaScript code based on the shoelace formula was practical importance. The experimental object was the residential area “Vyshenka” in Vinnytsia (Ukraine). The selected plot has an area of 1350 m2 with an initial number of parking spaces before optimization –50, after –59. In general, the efficiency of using the area increased from 70% to 88%. In addition, a 22% reduction in accidents is noted, which indicates the significant effectiveness of the model and minimal calculation error. A feature of the proposed solution is also that not only linear dimensions are taken into account, but also the relief, infrastructure facilities and the initial shape of the site. There is also the possibility of integration into web applications and CAD programs for simultaneous planning and construction, which allows for an increase in the number of parking spaces of up to 20% without expanding the territories. The results of the modeling can be used by engineers and builders to improve the landscaping of residential areas where there is no possibility for expanding the territories, programmers – by integrating the model into web applications and business.
- Open Access
- 9 February 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 21 (1)
Stabilization of biofuel mixtures by phase separation method of diesel fuel with bioethanol
У статті детально досліджено проблему стабілізації біопаливних сумішей, сформованих шляхом змішування традиційного дизельного палива з біоетанолом, з акцентом на застосування методу контрольованої фазової сепарації як ефективного інструменту для подолання природної нестабільності таких емульсій. На початку роботи наведено теоретичний огляд фізико-хімічних механізмів утворення бінарних і тернарних систем «дизель – біоетанол – вода», з особливим наголосом на ролі домішок води, яка виступає ключовим дестабілізуючим фактором, спричиняючи фазовий розшаровування за принципом гідрофільно-гідрофобної взаємодії. Аналізовано вплив термодинамічних параметрів (температури, тиску), співвідношення компонентів, а також молекулярної структури вуглеводневих ланцюгів дизельного палива на критичні точки помутніння та повного розшарування системи. Запропоновано оригінальний технологічний цикл фазової сепарації, що включає етапи попереднього емульгування, контрольованого нагрівання (або охолодження) для прискорення коалесценції крапель, а також гравітаційного або центрифугального розділення фаз. Особливу увагу приділено ролі поверхнево-активних речовин (ПАР) і ко-сольвентів (наприклад, вищих спиртів або естерів жирних кислот), які дозволяють регулювати міжфазний натяг, кінетику сепарації та кінцеву чистоту фаз. Експериментальна частина роботи охоплює серію лабораторних випробувань з варіюванням складу сумішей (від 5 до 30 % об. біоетанолу), температури (від –10 до +50 °C) та концентрації добавок. За допомогою сучасних аналітичних методів — газової хроматографії, спектроскопії ІЧ-діапазону, динамічного світлорозсіювання та реологічних вимірювань — встановлено кількісні залежності між параметрами процесу та стабільністю отриманої дизельної фази. Результати демонструють, що після контрольованої сепарації нижня дизельна фаза містить менше 0,5 % біоетанолу та практично не містить води, що забезпечує її стабільність при зберіганні протягом понад 6 місяців без ознак помутніння чи утворення осаду. Верхня спиртова фаза, збагачена біоетанолом (до 80–90 %), може бути рецикльована або використана як компонент для виробництва етанольних присадок. Енергетичні характеристики стабілізованої дизельної фракції (теплота згоряння, цетанове число, в’язкість) залишаються в межах норм EN 590, що підтверджує можливість її прямого використання в дизельних двигунах без модифікації обладнання. Проведено також оцінку екологічних переваг: зниження викидів сажі на 15–20 %, CO на 10–12 % та NOx на 5–8 % при спалюванні стабілізованої біодизель-етанольної суміші порівняно з чистим дизельним паливом. Обговорено економічні аспекти впровадження технології, включаючи енерговитрати на сепарацію та потенціал інтеграції в існуючі схеми біоетанольного виробництва. У висновках підкреслено, що розроблений метод фазової сепарації відкриває реальні перспективи для масштабного виробництва стабільних біопаливних сумішей дизель–біоетанол, сприяючи зниженню залежності від викопного палива, зменшенню викидів парникових газів і розвитку біоенергетичного сектору в умовах глобального енергетичного переходу.
- 9 February 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 21 (1)
Open AccessStabilization of biofuel mixtures by phase separation method of diesel fuel with bioethanol
У статті детально досліджено проблему стабілізації біопаливних сумішей, сформованих шляхом змішування традиційного дизельного палива з біоетанолом, з акцентом на застосування методу контрольованої фазової сепарації як ефективного інструменту для подолання природної нестабільності таких емульсій. На початку роботи наведено теоретичний огляд фізико-хімічних механізмів утворення бінарних і тернарних систем «дизель – біоетанол – вода», з особливим наголосом на ролі домішок води, яка виступає ключовим дестабілізуючим фактором, спричиняючи фазовий розшаровування за принципом гідрофільно-гідрофобної взаємодії. Аналізовано вплив термодинамічних параметрів (температури, тиску), співвідношення компонентів, а також молекулярної структури вуглеводневих ланцюгів дизельного палива на критичні точки помутніння та повного розшарування системи. Запропоновано оригінальний технологічний цикл фазової сепарації, що включає етапи попереднього емульгування, контрольованого нагрівання (або охолодження) для прискорення коалесценції крапель, а також гравітаційного або центрифугального розділення фаз. Особливу увагу приділено ролі поверхнево-активних речовин (ПАР) і ко-сольвентів (наприклад, вищих спиртів або естерів жирних кислот), які дозволяють регулювати міжфазний натяг, кінетику сепарації та кінцеву чистоту фаз. Експериментальна частина роботи охоплює серію лабораторних випробувань з варіюванням складу сумішей (від 5 до 30 % об. біоетанолу), температури (від –10 до +50 °C) та концентрації добавок. За допомогою сучасних аналітичних методів — газової хроматографії, спектроскопії ІЧ-діапазону, динамічного світлорозсіювання та реологічних вимірювань — встановлено кількісні залежності між параметрами процесу та стабільністю отриманої дизельної фази. Результати демонструють, що після контрольованої сепарації нижня дизельна фаза містить менше 0,5 % біоетанолу та практично не містить води, що забезпечує її стабільність при зберіганні протягом понад 6 місяців без ознак помутніння чи утворення осаду. Верхня спиртова фаза, збагачена біоетанолом (до 80–90 %), може бути рецикльована або використана як компонент для виробництва етанольних присадок. Енергетичні характеристики стабілізованої дизельної фракції (теплота згоряння, цетанове число, в’язкість) залишаються в межах норм EN 590, що підтверджує можливість її прямого використання в дизельних двигунах без модифікації обладнання. Проведено також оцінку екологічних переваг: зниження викидів сажі на 15–20 %, CO на 10–12 % та NOx на 5–8 % при спалюванні стабілізованої біодизель-етанольної суміші порівняно з чистим дизельним паливом. Обговорено економічні аспекти впровадження технології, включаючи енерговитрати на сепарацію та потенціал інтеграції в існуючі схеми біоетанольного виробництва. У висновках підкреслено, що розроблений метод фазової сепарації відкриває реальні перспективи для масштабного виробництва стабільних біопаливних сумішей дизель–біоетанол, сприяючи зниженню залежності від викопного палива, зменшенню викидів парникових газів і розвитку біоенергетичного сектору в умовах глобального енергетичного переходу.
- Open Access
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 124
MODERN TECHNOLOGIES AND TRENDS FOR THE FUTURE USE OF TRACK BIKES FOR TRANSPORTING SOLID HOUSEHOLD WASTE
The article considers modern technologies and innovative approaches to the introduction of cargo bikes - trucks into the system of collection and transportation of solid household waste in urban and suburban conditions. Growing environmental challenges, the need to reduce greenhouse gas emissions and restricting the use of traditional vehicles in densely populated areas encourage the search for alternative solutions in the field of municipal logistics. One of the promising areas is the use of cargo cargo bikes - trucks, in particular electrified models, capable of ensuring transportation efficiency with minimal negative impact on the environment. The article analyzes in detail the technical capabilities of bikes-trucks, their carrying capacity, energy efficiency and the feasibility of integration into the waste management system. A conceptual model of the use of bikes-trucks in urban infrastructure is proposed, taking into account the factors of population density, route length and road network congestion. A comparative analysis of traditional garbage trucks and bikes-trucks is carried out according to the criteria of economy, environmental friendliness and maneuverability. The results of the research demonstrate that the use of bikes-trucks for transporting solid household waste can reduce CO₂ emissions by 30–50% compared to diesel cars, as well as contribute to reducing noise pollution in cities. In addition, the system has shown effectiveness in areas with narrow streets and traffic restrictions, where traditional transport is of little use. The article also provides recommendations for the development of the infrastructure necessary for the widespread introduction of bikes-trucks, including specialized sites, charging stations and logistics centers. The proposed approach may be useful for local governments, municipal services, as well as engineers and entrepreneurs involved in the development and implementation of environmentally friendly transport systems. The results obtained contribute to the formation of new trends in the field of "green" urban logistics and the development of sustainable infrastructure.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 124
Open AccessMODERN TECHNOLOGIES AND TRENDS FOR THE FUTURE USE OF TRACK BIKES FOR TRANSPORTING SOLID HOUSEHOLD WASTE
The article considers modern technologies and innovative approaches to the introduction of cargo bikes - trucks into the system of collection and transportation of solid household waste in urban and suburban conditions. Growing environmental challenges, the need to reduce greenhouse gas emissions and restricting the use of traditional vehicles in densely populated areas encourage the search for alternative solutions in the field of municipal logistics. One of the promising areas is the use of cargo cargo bikes - trucks, in particular electrified models, capable of ensuring transportation efficiency with minimal negative impact on the environment. The article analyzes in detail the technical capabilities of bikes-trucks, their carrying capacity, energy efficiency and the feasibility of integration into the waste management system. A conceptual model of the use of bikes-trucks in urban infrastructure is proposed, taking into account the factors of population density, route length and road network congestion. A comparative analysis of traditional garbage trucks and bikes-trucks is carried out according to the criteria of economy, environmental friendliness and maneuverability. The results of the research demonstrate that the use of bikes-trucks for transporting solid household waste can reduce CO₂ emissions by 30–50% compared to diesel cars, as well as contribute to reducing noise pollution in cities. In addition, the system has shown effectiveness in areas with narrow streets and traffic restrictions, where traditional transport is of little use. The article also provides recommendations for the development of the infrastructure necessary for the widespread introduction of bikes-trucks, including specialized sites, charging stations and logistics centers. The proposed approach may be useful for local governments, municipal services, as well as engineers and entrepreneurs involved in the development and implementation of environmentally friendly transport systems. The results obtained contribute to the formation of new trends in the field of "green" urban logistics and the development of sustainable infrastructure.
- Open Access
- 30 October 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(85)) , 49-57
Integration of contact network and autonomous trolleybuses for improving the city's transport system
The object of the study is the technical characteristics of autonomous trolleybuses and the systems that ensure their uninterrupted power supply. A key challenge is the dependence of conventional trolleybuses on contact networks, which limits their route versatility, complicates operations in historic city centers, bridge crossings, and regions with underdeveloped infrastructure. The article examines key technological aspects of autonomous trolleybuses, including types of charging stations (contact, inductive, with pantographs), charging efficiency, energy consumption, and autonomous range. Examples of the implementation of this technology in Ukraine are presented, along with an analysis of charging costs and energy characteristics for runs of 20–50 km. The prospects of using autonomous trolleybuses for optimizing the city transport network, reducing CO₂ emissions, and improving the quality of passenger service are emphasized. Calculations have been made of the energy required for a trolleybus to travel a distance of 20–50 km, taking into account the average energy consumption (1.2–2.0 kWh/km), charging station capacity (up to 100 kW,) and charging efficiency (0.9). Calculations have shown that for an autonomous trolleybus run of 30 km, 45 kWh of energy is required. Modern lithium-ion batteries and charging stations with a capacity of up to 100 kW provide a full charge in 30 minutes. Intermediate charging at stops minimizes contact infrastructure while maintaining transport system flexibility. Autonomous trolleybuses reduce dependence on contact networks, which is especially relevant for bridge crossings with complicated construction or maintenance and historic centers requiring architecture preservation without excess infrastructure. They also significantly reduce CO₂ emissions to promote ecological sustainability and improve urban air quality by lowering pollution and benefiting public health.
- 30 October 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(85)) , 49-57
Open AccessIntegration of contact network and autonomous trolleybuses for improving the city's transport system
The object of the study is the technical characteristics of autonomous trolleybuses and the systems that ensure their uninterrupted power supply. A key challenge is the dependence of conventional trolleybuses on contact networks, which limits their route versatility, complicates operations in historic city centers, bridge crossings, and regions with underdeveloped infrastructure. The article examines key technological aspects of autonomous trolleybuses, including types of charging stations (contact, inductive, with pantographs), charging efficiency, energy consumption, and autonomous range. Examples of the implementation of this technology in Ukraine are presented, along with an analysis of charging costs and energy characteristics for runs of 20–50 km. The prospects of using autonomous trolleybuses for optimizing the city transport network, reducing CO₂ emissions, and improving the quality of passenger service are emphasized. Calculations have been made of the energy required for a trolleybus to travel a distance of 20–50 km, taking into account the average energy consumption (1.2–2.0 kWh/km), charging station capacity (up to 100 kW,) and charging efficiency (0.9). Calculations have shown that for an autonomous trolleybus run of 30 km, 45 kWh of energy is required. Modern lithium-ion batteries and charging stations with a capacity of up to 100 kW provide a full charge in 30 minutes. Intermediate charging at stops minimizes contact infrastructure while maintaining transport system flexibility. Autonomous trolleybuses reduce dependence on contact networks, which is especially relevant for bridge crossings with complicated construction or maintenance and historic centers requiring architecture preservation without excess infrastructure. They also significantly reduce CO₂ emissions to promote ecological sustainability and improve urban air quality by lowering pollution and benefiting public health.
- Open Access
- 4 April 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (3(82)) , 43-51
Comparison of technological operations in processing alfalufer hay in terms of their impact on forage quality and quantity
Haymaking is a key stage in feed production, as the choice of technological methods directly affects its quality, nutritional value, and digestibility by animals. One of the most significant challenges in this process is the mechanical loss of alfalfa leaves during harvesting and processing of the mown mass. It is well known that leaves contain the majority of protein, carotene, and other biologically active substances. Research results have confirmed the significant impact of windrow processing frequency on dry matter losses and the nutritional value of the feed. It has been established that a single windrow treatment during drying reduces dry matter losses by 2.6–4.5 % compared to multiple tedding operations. This has a positive effect on the chemical composition of the hay and promotes the preservation of essential nutrients, particularly carotene. The carotene content in the natural mass with single windrow processing reached 32.4 mg/kg in the first experiment and 30.4 mg/kg in the second, which significantly exceeds the values for hay subjected to intensive mechanical processing. Optimizing the haymaking process not only reduces nutrient losses but also shortens drying times, which is especially important under unfavorable weather conditions. Reducing the time that mown mass remains in the field minimizes the risk of feed quality deterioration due to precipitation and promotes uniform drying of stems and leaves. Thus, improving the technological processes of alfalfa haymaking enables the production of high-quality feed with a high nutrient content and stable feed characteristics. Compared to traditional harvesting methods, the use of optimized technologies helps reduce dry matter losses, increase carotene and protein content, and improve the overall nutritional value of the hay. This contributes to a more efficient supply of high-quality roughage for livestock farming, which is a crucial factor in enhancing the productivity of agricultural animals and the profitability of the industry as a whole.
- 4 April 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (3(82)) , 43-51
Open AccessComparison of technological operations in processing alfalufer hay in terms of their impact on forage quality and quantity
Haymaking is a key stage in feed production, as the choice of technological methods directly affects its quality, nutritional value, and digestibility by animals. One of the most significant challenges in this process is the mechanical loss of alfalfa leaves during harvesting and processing of the mown mass. It is well known that leaves contain the majority of protein, carotene, and other biologically active substances. Research results have confirmed the significant impact of windrow processing frequency on dry matter losses and the nutritional value of the feed. It has been established that a single windrow treatment during drying reduces dry matter losses by 2.6–4.5 % compared to multiple tedding operations. This has a positive effect on the chemical composition of the hay and promotes the preservation of essential nutrients, particularly carotene. The carotene content in the natural mass with single windrow processing reached 32.4 mg/kg in the first experiment and 30.4 mg/kg in the second, which significantly exceeds the values for hay subjected to intensive mechanical processing. Optimizing the haymaking process not only reduces nutrient losses but also shortens drying times, which is especially important under unfavorable weather conditions. Reducing the time that mown mass remains in the field minimizes the risk of feed quality deterioration due to precipitation and promotes uniform drying of stems and leaves. Thus, improving the technological processes of alfalfa haymaking enables the production of high-quality feed with a high nutrient content and stable feed characteristics. Compared to traditional harvesting methods, the use of optimized technologies helps reduce dry matter losses, increase carotene and protein content, and improve the overall nutritional value of the hay. This contributes to a more efficient supply of high-quality roughage for livestock farming, which is a crucial factor in enhancing the productivity of agricultural animals and the profitability of the industry as a whole.
- 31 March 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1 (128),p. 37-44
OPTIMIZATION BIOFUEL CONSUMPTION THROUGH THE DEVELOPMENT OF AN ADAPTIVE CONTROL ALGORITHM
The article discusses modern approaches to improving the efficiency of machine-tractor units by optimizing fuel consumption using a fuel component mixer. Rising fuel prices and tightening environmental requirements encourage the search for new technologies that ensure economical and environmentally friendly operation of agricultural machinery. One of the promising solutions is the use of power systems with a fuel mixer, which allows you to adjust the ratio of fuel mixture components in real time, taking into account the load on the engine, its speed and temperature regimes. The article analyzes in detail the influence of various parameters of the fuel mixture on the efficiency of the engine and its economy. A mathematical model of the fuel mixing process is proposed, which takes into account the physicochemical properties of the components, as well as a control algorithm that allows adaptively adjusting the fuel mixture to achieve optimal consumption indicators. Computer modeling of the engine operation using different fuel mixture compositions was carried out, which made it possible to assess the influence of the mixer on the dynamic characteristics of the unit and fuel economy. The results of the research show that the use of a fuel mixer allows you to reduce costs by 10-15% without losing power, while maintaining the stability of engine operation. In addition, it was possible to reduce emissions of harmful substances into the atmosphere, which contributes to increasing the environmental friendliness of agricultural work. The article also provides recommendations for setting up and operating a fuel mixing system to achieve maximum efficiency. The proposed approach may be useful for engineers involved in the development of fuel systems, as well as for farmers seeking to reduce operating costs. The results obtained contribute to the further development of energy-efficient technologies in agricultural machinery.
- 31 March 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1 (128),p. 37-44
OPTIMIZATION BIOFUEL CONSUMPTION THROUGH THE DEVELOPMENT OF AN ADAPTIVE CONTROL ALGORITHM
The article discusses modern approaches to improving the efficiency of machine-tractor units by optimizing fuel consumption using a fuel component mixer. Rising fuel prices and tightening environmental requirements encourage the search for new technologies that ensure economical and environmentally friendly operation of agricultural machinery. One of the promising solutions is the use of power systems with a fuel mixer, which allows you to adjust the ratio of fuel mixture components in real time, taking into account the load on the engine, its speed and temperature regimes. The article analyzes in detail the influence of various parameters of the fuel mixture on the efficiency of the engine and its economy. A mathematical model of the fuel mixing process is proposed, which takes into account the physicochemical properties of the components, as well as a control algorithm that allows adaptively adjusting the fuel mixture to achieve optimal consumption indicators. Computer modeling of the engine operation using different fuel mixture compositions was carried out, which made it possible to assess the influence of the mixer on the dynamic characteristics of the unit and fuel economy. The results of the research show that the use of a fuel mixer allows you to reduce costs by 10-15% without losing power, while maintaining the stability of engine operation. In addition, it was possible to reduce emissions of harmful substances into the atmosphere, which contributes to increasing the environmental friendliness of agricultural work. The article also provides recommendations for setting up and operating a fuel mixing system to achieve maximum efficiency. The proposed approach may be useful for engineers involved in the development of fuel systems, as well as for farmers seeking to reduce operating costs. The results obtained contribute to the further development of energy-efficient technologies in agricultural machinery.
- 22 April 2024
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(124),p. 140-148
MODERN INNOVATIVE TECHNOLOGIES AND MATERIALS FOR ENHANCING THE EFFICIENCY OF SOLAR PANELS
The use of alternative energy sources, such as solar, wind, hydropower, etc., can reduce dependence on traditional energy sources, which are unstable and limited. This can help solve the problem of energy shortages and reduce the risk of energy crises. The article provides an overview of modern innovative technologies in the field of production, operation, and recycling of solar panel systems. Photovoltaic technologies have a long history of development and refinement, as from their inception, they were relatively large, costly, and inefficient systems. However, over the years, scientists and engineers, recognizing the extraordinary importance of renewable systems, have worked on comprehensive improvement and modernization of these technologies. Today, modern panels are capable of achieving an efficiency ratio of around 20%. Panels have gradually become more accessible to people, their application in various sectors has increased, and now solar energy systems are used both for energy generation for sale and for the self-consumption of homeowners or factories. The article primarily examines modern materials for the photovoltaic elements of panels, their advantages and disadvantages, and application peculiarities. Various innovative approaches and panel enclosure materials are considered to ensure the strength and lightness of solar systems. Additionally, perovskite solar panels are discussed in detail, along with the prospects of their industrial-scale application. Given that like any technology, solar panels have a limited lifespan, approaches to panel recycling after their operational life are also considered. Finally, the article addresses the application of innovative technologies in the field of renewable energy sources in Ukraine, as many systems will require replacement due to military actions in the south and east of the country.
- 22 April 2024
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(124),p. 140-148
MODERN INNOVATIVE TECHNOLOGIES AND MATERIALS FOR ENHANCING THE EFFICIENCY OF SOLAR PANELS
The use of alternative energy sources, such as solar, wind, hydropower, etc., can reduce dependence on traditional energy sources, which are unstable and limited. This can help solve the problem of energy shortages and reduce the risk of energy crises. The article provides an overview of modern innovative technologies in the field of production, operation, and recycling of solar panel systems. Photovoltaic technologies have a long history of development and refinement, as from their inception, they were relatively large, costly, and inefficient systems. However, over the years, scientists and engineers, recognizing the extraordinary importance of renewable systems, have worked on comprehensive improvement and modernization of these technologies. Today, modern panels are capable of achieving an efficiency ratio of around 20%. Panels have gradually become more accessible to people, their application in various sectors has increased, and now solar energy systems are used both for energy generation for sale and for the self-consumption of homeowners or factories. The article primarily examines modern materials for the photovoltaic elements of panels, their advantages and disadvantages, and application peculiarities. Various innovative approaches and panel enclosure materials are considered to ensure the strength and lightness of solar systems. Additionally, perovskite solar panels are discussed in detail, along with the prospects of their industrial-scale application. Given that like any technology, solar panels have a limited lifespan, approaches to panel recycling after their operational life are also considered. Finally, the article addresses the application of innovative technologies in the field of renewable energy sources in Ukraine, as many systems will require replacement due to military actions in the south and east of the country.
- Open Access
- 1 January 2024
- Published by Vinnytsia National Technical University in Visnyk of Vinnytsia Politechnical Institute
- Vol. 177 (6) , 152–160
Modern Gas-Thermal Coating Methods in Innovative Technologies for the Repair by Restoration of Automotive Components
In the era of technological progress, where advancements are evolving at a rapid pace, modern approaches to automotive component repair deserve special attention. Through the use of innovative materials and restoration methods, vehicle owners can significantly extend the lifespan of their vehicles. This not only enhances the reliability of automobiles but also reduces the need for frequent repairs, leading to substantial cost savings. Moreover, with the application of modern technologies, the repair by restoration process becomes more efficient, saving both time and resources. Therefore, analyzing the application of modern gas-thermal coating methods in innovative technologies for the restoration of automotive components, utilizing various gas-thermal spraying techniques during the repair of vehicle parts and assemblies, and ensuring warranty coverage for post-repair service life is highly relevant. To enhance the efficiency and reliability of restoration processes, modern gas-thermal coating methods in innovative automotive component restoration technologies have been examined, with a focus on their practical application in Ukraine. Additionally, some common coating techniques for the thermal spraying of automotive parts have been analyzed. Their use enables achieving high-performance characteristics of products while minimizing environmental impact. Wires or powders are used as raw materials. The material may consist of a single element, but more commonly, alloys or composites are employed. These materials are selected to provide the required set of properties, ensuring the functionality of the component or assembly under specified operating conditions and strong adhesion to the base material. The primary factors, conditions, and parameters of gas-thermal spraying include the composition, dispersity, temperature, and velocity of particles; particle concentration in the gas stream; spraying distance; the composition and properties of the gas medium transporting the particles; the environment in which the coating is applied (composition, pressure, temperature); as well as the material and condition of the substrate surface (roughness, chemical cleanliness). Thus, innovations in coating application for the restoration of automotive components continue to transform the industry, enabling increased efficiency and durability of technical parts, reducing capital and operational repair costs, and minimizing environmental impact. В епоху технологічного прогресу, коли технології розвиваються стрімкими темпами, особливої уваги заслуговує сучасний підхід до ремонту деталей автомобілів. Завдяки інноваційним матеріалам та методам відновлення деталей, власники автомобілів можуть значно продовжити термін служби своїх транспортних засобів. Це не лише підвищує надійність автомобілів, а й дозволяє зекономити на постійних ремонтах. До того ж, з використанням сучасних технологій процес ремонту відновленням деталей стає ефективнішим, що економить час і кошти. Тому аналіз використання сучасних методів газотермічного покриття в інноваційних технологіях для відновлення деталей автомобілів, за використання різних способів газотермічного напилення під час ремонту деталей автомобілів та їхніх агрегатів, а також забезпечення гарантії для післяремонтного ресурсу є актуальним. Для підвищення ефективності та надійності відновлення деталей автомобілів розглянуто сучасні методи газотермічного покриття в інноваційних технологіях відновлення деталей автомобілів, які доцільно використовувати в Україні, та деякі розповсюдженні способи покриттів для напилення деталей автомобілів. Як вихідні матеріали використовуються дроти або порошки. Матеріал може містити один елемент, але частіше використовуються сплави або композиції з необхідним комплексом властивостей, що забезпечують працездатність деталі або вузла в заданих умовах експлуатації, і міцність зчеплення з основним матеріалом. Основними факторами, умовами і параметрами газотермічного нанесення є: склад, дисперсність, температура і швидкість частинок, концентрація частинок в газовому потоці, дистанція напилення, склад і властивості газового середовища, що переносить частинки, середовище в якій наноситься покриття (склад, тиск, температура), матеріал та стан поверхні підкладки (шорсткість, хімічна чистота). Таким чином, інновації у сфері нанесення покриттів у разі...
- 1 January 2024
- Published by Vinnytsia National Technical University in Visnyk of Vinnytsia Politechnical Institute
- Vol. 177 (6) , 152–160
Open AccessModern Gas-Thermal Coating Methods in Innovative Technologies for the Repair by Restoration of Automotive Components
In the era of technological progress, where advancements are evolving at a rapid pace, modern approaches to automotive component repair deserve special attention. Through the use of innovative materials and restoration methods, vehicle owners can significantly extend the lifespan of their vehicles. This not only enhances the reliability of automobiles but also reduces the need for frequent repairs, leading to substantial cost savings. Moreover, with the application of modern technologies, the repair by restoration process becomes more efficient, saving both time and resources. Therefore, analyzing the application of modern gas-thermal coating methods in innovative technologies for the restoration of automotive components, utilizing various gas-thermal spraying techniques during the repair of vehicle parts and assemblies, and ensuring warranty coverage for post-repair service life is highly relevant. To enhance the efficiency and reliability of restoration processes, modern gas-thermal coating methods in innovative automotive component restoration technologies have been examined, with a focus on their practical application in Ukraine. Additionally, some common coating techniques for the thermal spraying of automotive parts have been analyzed. Their use enables achieving high-performance characteristics of products while minimizing environmental impact. Wires or powders are used as raw materials. The material may consist of a single element, but more commonly, alloys or composites are employed. These materials are selected to provide the required set of properties, ensuring the functionality of the component or assembly under specified operating conditions and strong adhesion to the base material. The primary factors, conditions, and parameters of gas-thermal spraying include the composition, dispersity, temperature, and velocity of particles; particle concentration in the gas stream; spraying distance; the composition and properties of the gas medium transporting the particles; the environment in which the coating is applied (composition, pressure, temperature); as well as the material and condition of the substrate surface (roughness, chemical cleanliness). Thus, innovations in coating application for the restoration of automotive components continue to transform the industry, enabling increased efficiency and durability of technical parts, reducing capital and operational repair costs, and minimizing environmental impact. В епоху технологічного прогресу, коли технології розвиваються стрімкими темпами, особливої уваги заслуговує сучасний підхід до ремонту деталей автомобілів. Завдяки інноваційним матеріалам та методам відновлення деталей, власники автомобілів можуть значно продовжити термін служби своїх транспортних засобів. Це не лише підвищує надійність автомобілів, а й дозволяє зекономити на постійних ремонтах. До того ж, з використанням сучасних технологій процес ремонту відновленням деталей стає ефективнішим, що економить час і кошти. Тому аналіз використання сучасних методів газотермічного покриття в інноваційних технологіях для відновлення деталей автомобілів, за використання різних способів газотермічного напилення під час ремонту деталей автомобілів та їхніх агрегатів, а також забезпечення гарантії для післяремонтного ресурсу є актуальним. Для підвищення ефективності та надійності відновлення деталей автомобілів розглянуто сучасні методи газотермічного покриття в інноваційних технологіях відновлення деталей автомобілів, які доцільно використовувати в Україні, та деякі розповсюдженні способи покриттів для напилення деталей автомобілів. Як вихідні матеріали використовуються дроти або порошки. Матеріал може містити один елемент, але частіше використовуються сплави або композиції з необхідним комплексом властивостей, що забезпечують працездатність деталі або вузла в заданих умовах експлуатації, і міцність зчеплення з основним матеріалом. Основними факторами, умовами і параметрами газотермічного нанесення є: склад, дисперсність, температура і швидкість частинок, концентрація частинок в газовому потоці, дистанція напилення, склад і властивості газового середовища, що переносить частинки, середовище в якій наноситься покриття (склад, тиск, температура), матеріал та стан поверхні підкладки (шорсткість, хімічна чистота). Таким чином, інновації у сфері нанесення покриттів у разі...
- Open Access
- 17 November 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Internal Combustion Engines
- No. 2,p. 47-50
IMPROVING THE ACCURACY OF SYSTEMS FOR GRAVIMETRIC CONTROL OF PARTICULATE MATTER IN EXHAUST GASES OF TRANSPORT DIESEL ENGINES
Проаналізовано вимоги нормативних документів – Правил ЄЕК ООН R-49, R-96, міжнародного стандарту ISO 8178 та ін. щодо технічних характеристик та умов використання еталонних повнопотоких та альтернативних частковопотокових систем (тунелів) для розбавлення відпрацьованих газів транспортних дизелів повітрям і проведення гравіметричного контролю вмісту в них твердих частинок. Досліджено світовий та вітчизняний досвід експлуатації розбавляючих тунелів різних типів – повнопотокових з 1-ю і 2-ма лініями розбавлення та частковопотокових міні- і мікро- тунелів, що дозволило встановити емпіричні залежності для оцінювання ступенів впливу температурних режимів відбору газових проб на точність вимірювань масових викидів твердих частинок на різних режимах роботи дизеля. Розроблено математичні моделі для визначення температур проби розбавлених відпрацьованих газів в тунелях різних типів та оцінювання результуючої похибки вимірювання нормованого середньоексплуатаційного викиду дизельних твердих частинок – показника РМ. На основі результатів екологічних випробувань транспортних дизелів 1Ч12/14 та 4ЧН12/14 за 13-ступінчастим випробувальним циклом ESC та розроблених математичних моделей проведено розрахункові дослідження з оцінювання впливу на точність мінітунелю з діаметром 10 см та мікротунелю з діаметром 3 см температурних режимів пробовідбору, які порівнювались з режимами еталонного тунелю з діаметром 46 см. Результати досліджень довели доцільність регулювання температури проби в мікротунелі для підвищення його точності шляхом усунення суттєвих методичних похибок вимірювань показника РМ, які складають -1,6 … -1,7 %. Встановлено, що в мінітунелі відповідні похибки є не суттєвими і складають -0,3 … -0,4 %, що свідчить про відсутність потреби в регулюванні температури проби в цій системі.
- 17 November 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Internal Combustion Engines
- No. 2,p. 47-50
Open AccessIMPROVING THE ACCURACY OF SYSTEMS FOR GRAVIMETRIC CONTROL OF PARTICULATE MATTER IN EXHAUST GASES OF TRANSPORT DIESEL ENGINES
Проаналізовано вимоги нормативних документів – Правил ЄЕК ООН R-49, R-96, міжнародного стандарту ISO 8178 та ін. щодо технічних характеристик та умов використання еталонних повнопотоких та альтернативних частковопотокових систем (тунелів) для розбавлення відпрацьованих газів транспортних дизелів повітрям і проведення гравіметричного контролю вмісту в них твердих частинок. Досліджено світовий та вітчизняний досвід експлуатації розбавляючих тунелів різних типів – повнопотокових з 1-ю і 2-ма лініями розбавлення та частковопотокових міні- і мікро- тунелів, що дозволило встановити емпіричні залежності для оцінювання ступенів впливу температурних режимів відбору газових проб на точність вимірювань масових викидів твердих частинок на різних режимах роботи дизеля. Розроблено математичні моделі для визначення температур проби розбавлених відпрацьованих газів в тунелях різних типів та оцінювання результуючої похибки вимірювання нормованого середньоексплуатаційного викиду дизельних твердих частинок – показника РМ. На основі результатів екологічних випробувань транспортних дизелів 1Ч12/14 та 4ЧН12/14 за 13-ступінчастим випробувальним циклом ESC та розроблених математичних моделей проведено розрахункові дослідження з оцінювання впливу на точність мінітунелю з діаметром 10 см та мікротунелю з діаметром 3 см температурних режимів пробовідбору, які порівнювались з режимами еталонного тунелю з діаметром 46 см. Результати досліджень довели доцільність регулювання температури проби в мікротунелі для підвищення його точності шляхом усунення суттєвих методичних похибок вимірювань показника РМ, які складають -1,6 … -1,7 %. Встановлено, що в мінітунелі відповідні похибки є не суттєвими і складають -0,3 … -0,4 %, що свідчить про відсутність потреби в регулюванні температури проби в цій системі.