Serhii Burlaka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Serhii Burlaka has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Ihor Kupchuk
Vinnytsia National Agrarian University
12 shared publications - Tetiana Boretska
Vinnytsia National Agrarian University
9 shared publications - Mykola Mytko
Vinnytsia National Technical University
7 shared publications - Vitalii Yaropud
Vinnytsia National Agrarian University
6 shared publications Vinnytsia National Agrarian University
4 shared publications- Олександр Олександрович Галущак
Vinnytsia National Technical University
4 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 3(122),p. 85
IMPROVEMENT OF THE MIXTURE FORMATION PROCESS IN THE ENGINE COMBUSTION CHAMBER WHEN SUPPLYING A FOUR-COMPONENT TWO-PHASE FUEL MIXTURE
The article considers the improvement of the mixture formation process in the engine combustion chamber when supplying a four-component two-phase fuel mixture. The relevance of the study is due to the need to increase the homogeneity of the fuel-air environment, intensify the evaporation of the liquid phase and ensure stable combustion of multicomponent fuels. A structural and functional scheme of the process is proposed, which includes a separate metered supply of four components, their preliminary mixing, the formation of a two-phase flow in the mixing chamber, subsequent spraying through the nozzle and the formation of a torch in the combustion chamber. Particular attention is paid to the mechanisms of dispersion of the liquid phase, evaporation of droplets, interaction of vapor and liquid phases with air and spatial distribution of the mixture in the chamber volume. The main parameters that affect the quality of mixture formation are determined: supply pressure, temperature of components, phase ratio, geometric characteristics of dosing channels and mixing unit, as well as spray dispersion. The feasibility of step-by-step mixture formation is substantiated, which allows to reduce the unevenness of the concentration of components and ensure a more stable structure of the two-phase torch. The proposed approach creates the prerequisites for increasing the area of interphase contact, accelerating heat and mass transfer, improving ignition conditions and increasing the completeness of combustion. The results can be used in the design and modernization of power systems for engines operating on multi-component alternative fuel compositions, as well as as a basis for further experimental and numerical research of mixture formation processes. The developed scheme allows us to trace the sequence of transformation of the initial components into a homogeneous fuel-air system prepared for ignition.
- 12 October 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 3(122),p. 85
Open AccessIMPROVEMENT OF THE MIXTURE FORMATION PROCESS IN THE ENGINE COMBUSTION CHAMBER WHEN SUPPLYING A FOUR-COMPONENT TWO-PHASE FUEL MIXTURE
The article considers the improvement of the mixture formation process in the engine combustion chamber when supplying a four-component two-phase fuel mixture. The relevance of the study is due to the need to increase the homogeneity of the fuel-air environment, intensify the evaporation of the liquid phase and ensure stable combustion of multicomponent fuels. A structural and functional scheme of the process is proposed, which includes a separate metered supply of four components, their preliminary mixing, the formation of a two-phase flow in the mixing chamber, subsequent spraying through the nozzle and the formation of a torch in the combustion chamber. Particular attention is paid to the mechanisms of dispersion of the liquid phase, evaporation of droplets, interaction of vapor and liquid phases with air and spatial distribution of the mixture in the chamber volume. The main parameters that affect the quality of mixture formation are determined: supply pressure, temperature of components, phase ratio, geometric characteristics of dosing channels and mixing unit, as well as spray dispersion. The feasibility of step-by-step mixture formation is substantiated, which allows to reduce the unevenness of the concentration of components and ensure a more stable structure of the two-phase torch. The proposed approach creates the prerequisites for increasing the area of interphase contact, accelerating heat and mass transfer, improving ignition conditions and increasing the completeness of combustion. The results can be used in the design and modernization of power systems for engines operating on multi-component alternative fuel compositions, as well as as a basis for further experimental and numerical research of mixture formation processes. The developed scheme allows us to trace the sequence of transformation of the initial components into a homogeneous fuel-air system prepared for ignition.
- Open Access
- 12 October 2026
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 118
DEVELOPMENT OF A TECHNICAL AND TECHNOLOGICAL SOLUTION FOR THE SUPPLY AND MIXING OF A FOUR-COMPONENT TWO-PHASE MIXTURE IN AN ENGINE COMBUSTION CHAMBER
The article considers the issue of developing a technical and technological solution to ensure stable supply, dosing and effective mixing of a four-component two-phase mixture directly in the engine combustion chamber. The relevance of the study is due to the need to increase the completeness of fuel combustion, improve the energy and environmental performance of the engine, as well as ensure controlled formation of the fuel-air mixture under variable operating conditions. The functional structure of the component supply system is substantiated, the requirements for dosing, mixing and spraying elements are determined, as well as for coordinating the flow rates, pressure, temperature and phase state of the components. A basic scheme for forming a two-phase flow is proposed, which involves the phased introduction of the mixture components, preliminary dispersion of the liquid phase and subsequent intensification of mixing in the injection zone. Particular attention is paid to ensuring the homogeneity of the mixture, flame stability, reducing the size of the drops and increasing the rate of mass and heat transfer. The methodological basis of the work is the analysis of the mixture formation processes, structural and functional modeling of the system and evaluation of the main operating parameters. The influence of the design parameters of the mixing unit, the geometry of the channels, the ratio of components and feed modes on the quality of mixture formation is considered. An algorithm for controlling the supply of components depending on the load and thermal state of the engine is formed. The proposed solution creates the prerequisites for increasing the combustion efficiency of the four-component mixture, reducing the unevenness of its distribution in the combustion chamber and improving the engine performance. The results obtained can be used when designing and modernizing fuel systems of engines operating on multi-component alternative fuel compositions.
- 12 October 2026
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 118
Open AccessDEVELOPMENT OF A TECHNICAL AND TECHNOLOGICAL SOLUTION FOR THE SUPPLY AND MIXING OF A FOUR-COMPONENT TWO-PHASE MIXTURE IN AN ENGINE COMBUSTION CHAMBER
The article considers the issue of developing a technical and technological solution to ensure stable supply, dosing and effective mixing of a four-component two-phase mixture directly in the engine combustion chamber. The relevance of the study is due to the need to increase the completeness of fuel combustion, improve the energy and environmental performance of the engine, as well as ensure controlled formation of the fuel-air mixture under variable operating conditions. The functional structure of the component supply system is substantiated, the requirements for dosing, mixing and spraying elements are determined, as well as for coordinating the flow rates, pressure, temperature and phase state of the components. A basic scheme for forming a two-phase flow is proposed, which involves the phased introduction of the mixture components, preliminary dispersion of the liquid phase and subsequent intensification of mixing in the injection zone. Particular attention is paid to ensuring the homogeneity of the mixture, flame stability, reducing the size of the drops and increasing the rate of mass and heat transfer. The methodological basis of the work is the analysis of the mixture formation processes, structural and functional modeling of the system and evaluation of the main operating parameters. The influence of the design parameters of the mixing unit, the geometry of the channels, the ratio of components and feed modes on the quality of mixture formation is considered. An algorithm for controlling the supply of components depending on the load and thermal state of the engine is formed. The proposed solution creates the prerequisites for increasing the combustion efficiency of the four-component mixture, reducing the unevenness of its distribution in the combustion chamber and improving the engine performance. The results obtained can be used when designing and modernizing fuel systems of engines operating on multi-component alternative fuel compositions.
- Open Access
- 30 April 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (3(88)) , 68-75
Optimization of feed procurement technology to minimize the cost of milk for farms of different production capacities
The object of research is the processes of harvesting, storage and feeding of stalk fodder in the feed supply system of Ukrainian dairy farms of various sizes and their impact on the economic indicators of milk production. The research solves the problem of choosing the optimal and economically feasible method of fodder procurement for certain production conditions. A nonlinear model has been developed for choosing the method of procurement for silage-hay feed rations of dairy farms of various production capacities (from 100 to 1200 heads) has been developed. The relevance of research is due to the need to create a scientifically based tool for optimizing the technology of fodder procurement, aimed at increasing the efficiency of fodder production, preserving the nutritional value of products and ensuring the competitiveness of dairy cattle breeding. A model has been developed for optimizing production based on nonlinear programming, which takes into account technological, biochemical and economic losses of nutrients. The optimization criterion was chosen as the cost of 1 kg of milk, provided that the physiological needs of animals in dry matter, protein, and metabolizable energy are met. The theoretical model was built on the basis of nutrient balance ratios, production function of productivity, cost function and optimization of the production structure taking into account resource, technological and market constraints. The implementation was carried out using iterative methods. The results indicate an economically feasible production volume within 944–1150 cows for the productivity level, where the minimum specific costs are achieved. It is proven that a reduction in dry matter losses by 5% provides a reduction in the cost of milk by 3–6% depending on the size of the farm. Three-dimensional response surfaces were constructed, which can serve as a tool for planning dairy farms.
- 30 April 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (3(88)) , 68-75
Open AccessOptimization of feed procurement technology to minimize the cost of milk for farms of different production capacities
The object of research is the processes of harvesting, storage and feeding of stalk fodder in the feed supply system of Ukrainian dairy farms of various sizes and their impact on the economic indicators of milk production. The research solves the problem of choosing the optimal and economically feasible method of fodder procurement for certain production conditions. A nonlinear model has been developed for choosing the method of procurement for silage-hay feed rations of dairy farms of various production capacities (from 100 to 1200 heads) has been developed. The relevance of research is due to the need to create a scientifically based tool for optimizing the technology of fodder procurement, aimed at increasing the efficiency of fodder production, preserving the nutritional value of products and ensuring the competitiveness of dairy cattle breeding. A model has been developed for optimizing production based on nonlinear programming, which takes into account technological, biochemical and economic losses of nutrients. The optimization criterion was chosen as the cost of 1 kg of milk, provided that the physiological needs of animals in dry matter, protein, and metabolizable energy are met. The theoretical model was built on the basis of nutrient balance ratios, production function of productivity, cost function and optimization of the production structure taking into account resource, technological and market constraints. The implementation was carried out using iterative methods. The results indicate an economically feasible production volume within 944–1150 cows for the productivity level, where the minimum specific costs are achieved. It is proven that a reduction in dry matter losses by 5% provides a reduction in the cost of milk by 3–6% depending on the size of the farm. Three-dimensional response surfaces were constructed, which can serve as a tool for planning dairy farms.
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Studying the Biogas Temperature Control System to Be Used at Stand-Alone Power Plants
Technical progress is characterized by a continuous expansion of automation in all areas of human activity, transition from partial automation to complex one, and then from complex automation to overall one, which ensures the highest possible technical-and-economic efficiency. Century XXI is called the century of information, since main successes of technical progress are now observed specifically in introduction of information technologies to various tools and automation systems. Automation is impossible without control and measurement equipment. The development of control and measurement equipment for automation systems is largely determined by achievements in compatible areas of science and technology in microelectronics, computing machinery, solid state physics, etc. It is for the developers of the systems meant for automation and control of various technological parameters that the most favorable environment for practical activity has been created in the form of a huge range of miniature-sized and reliable sensors that are easily connected to secondary equipment and allow for transmission of measurement data over considerable distances in conditions of intensive industrial disturbances.
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Studying the Biogas Temperature Control System to Be Used at Stand-Alone Power Plants
Technical progress is characterized by a continuous expansion of automation in all areas of human activity, transition from partial automation to complex one, and then from complex automation to overall one, which ensures the highest possible technical-and-economic efficiency. Century XXI is called the century of information, since main successes of technical progress are now observed specifically in introduction of information technologies to various tools and automation systems. Automation is impossible without control and measurement equipment. The development of control and measurement equipment for automation systems is largely determined by achievements in compatible areas of science and technology in microelectronics, computing machinery, solid state physics, etc. It is for the developers of the systems meant for automation and control of various technological parameters that the most favorable environment for practical activity has been created in the form of a huge range of miniature-sized and reliable sensors that are easily connected to secondary equipment and allow for transmission of measurement data over considerable distances in conditions of intensive industrial disturbances.
- Open Access
- 28 February 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (1(87)) , 38-43
Development of universal model for optimizing parking spaces in complex geometric configurations
The object of research is the process of designing and optimizing parking areas in complex geometric configurations in conditions of dense development. The main problem is to solve the use of areas of complex geometric configuration for parking areas. In addition, there are currently no universal models and methods for the corresponding calculation and optimization. The result of the work was the receipt of a universal mathematical model with which it is possible to determine the number of parking spaces based on the geometric dimensions and area of the plot. A special feature is the possibility of calculating for complex geometric configurations (polygons). For this, the Gauss formula and the JavaScript programming language are used. The initial data are geodetic measurements, and the error in such a calculation is less than 2%. The development of JavaScript code based on the shoelace formula was practical importance. The experimental object was the residential area “Vyshenka” in Vinnytsia (Ukraine). The selected plot has an area of 1350 m2 with an initial number of parking spaces before optimization –50, after –59. In general, the efficiency of using the area increased from 70% to 88%. In addition, a 22% reduction in accidents is noted, which indicates the significant effectiveness of the model and minimal calculation error. A feature of the proposed solution is also that not only linear dimensions are taken into account, but also the relief, infrastructure facilities and the initial shape of the site. There is also the possibility of integration into web applications and CAD programs for simultaneous planning and construction, which allows for an increase in the number of parking spaces of up to 20% without expanding the territories. The results of the modeling can be used by engineers and builders to improve the landscaping of residential areas where there is no possibility for expanding the territories, programmers – by integrating the model into web applications and business.
- 28 February 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (1(87)) , 38-43
Open AccessDevelopment of universal model for optimizing parking spaces in complex geometric configurations
The object of research is the process of designing and optimizing parking areas in complex geometric configurations in conditions of dense development. The main problem is to solve the use of areas of complex geometric configuration for parking areas. In addition, there are currently no universal models and methods for the corresponding calculation and optimization. The result of the work was the receipt of a universal mathematical model with which it is possible to determine the number of parking spaces based on the geometric dimensions and area of the plot. A special feature is the possibility of calculating for complex geometric configurations (polygons). For this, the Gauss formula and the JavaScript programming language are used. The initial data are geodetic measurements, and the error in such a calculation is less than 2%. The development of JavaScript code based on the shoelace formula was practical importance. The experimental object was the residential area “Vyshenka” in Vinnytsia (Ukraine). The selected plot has an area of 1350 m2 with an initial number of parking spaces before optimization –50, after –59. In general, the efficiency of using the area increased from 70% to 88%. In addition, a 22% reduction in accidents is noted, which indicates the significant effectiveness of the model and minimal calculation error. A feature of the proposed solution is also that not only linear dimensions are taken into account, but also the relief, infrastructure facilities and the initial shape of the site. There is also the possibility of integration into web applications and CAD programs for simultaneous planning and construction, which allows for an increase in the number of parking spaces of up to 20% without expanding the territories. The results of the modeling can be used by engineers and builders to improve the landscaping of residential areas where there is no possibility for expanding the territories, programmers – by integrating the model into web applications and business.
- Open Access
- 9 February 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 21 (1)
Stabilization of biofuel mixtures by phase separation method of diesel fuel with bioethanol
У статті детально досліджено проблему стабілізації біопаливних сумішей, сформованих шляхом змішування традиційного дизельного палива з біоетанолом, з акцентом на застосування методу контрольованої фазової сепарації як ефективного інструменту для подолання природної нестабільності таких емульсій. На початку роботи наведено теоретичний огляд фізико-хімічних механізмів утворення бінарних і тернарних систем «дизель – біоетанол – вода», з особливим наголосом на ролі домішок води, яка виступає ключовим дестабілізуючим фактором, спричиняючи фазовий розшаровування за принципом гідрофільно-гідрофобної взаємодії. Аналізовано вплив термодинамічних параметрів (температури, тиску), співвідношення компонентів, а також молекулярної структури вуглеводневих ланцюгів дизельного палива на критичні точки помутніння та повного розшарування системи. Запропоновано оригінальний технологічний цикл фазової сепарації, що включає етапи попереднього емульгування, контрольованого нагрівання (або охолодження) для прискорення коалесценції крапель, а також гравітаційного або центрифугального розділення фаз. Особливу увагу приділено ролі поверхнево-активних речовин (ПАР) і ко-сольвентів (наприклад, вищих спиртів або естерів жирних кислот), які дозволяють регулювати міжфазний натяг, кінетику сепарації та кінцеву чистоту фаз. Експериментальна частина роботи охоплює серію лабораторних випробувань з варіюванням складу сумішей (від 5 до 30 % об. біоетанолу), температури (від –10 до +50 °C) та концентрації добавок. За допомогою сучасних аналітичних методів — газової хроматографії, спектроскопії ІЧ-діапазону, динамічного світлорозсіювання та реологічних вимірювань — встановлено кількісні залежності між параметрами процесу та стабільністю отриманої дизельної фази. Результати демонструють, що після контрольованої сепарації нижня дизельна фаза містить менше 0,5 % біоетанолу та практично не містить води, що забезпечує її стабільність при зберіганні протягом понад 6 місяців без ознак помутніння чи утворення осаду. Верхня спиртова фаза, збагачена біоетанолом (до 80–90 %), може бути рецикльована або використана як компонент для виробництва етанольних присадок. Енергетичні характеристики стабілізованої дизельної фракції (теплота згоряння, цетанове число, в’язкість) залишаються в межах норм EN 590, що підтверджує можливість її прямого використання в дизельних двигунах без модифікації обладнання. Проведено також оцінку екологічних переваг: зниження викидів сажі на 15–20 %, CO на 10–12 % та NOx на 5–8 % при спалюванні стабілізованої біодизель-етанольної суміші порівняно з чистим дизельним паливом. Обговорено економічні аспекти впровадження технології, включаючи енерговитрати на сепарацію та потенціал інтеграції в існуючі схеми біоетанольного виробництва. У висновках підкреслено, що розроблений метод фазової сепарації відкриває реальні перспективи для масштабного виробництва стабільних біопаливних сумішей дизель–біоетанол, сприяючи зниженню залежності від викопного палива, зменшенню викидів парникових газів і розвитку біоенергетичного сектору в умовах глобального енергетичного переходу.
- 9 February 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 21 (1)
Open AccessStabilization of biofuel mixtures by phase separation method of diesel fuel with bioethanol
У статті детально досліджено проблему стабілізації біопаливних сумішей, сформованих шляхом змішування традиційного дизельного палива з біоетанолом, з акцентом на застосування методу контрольованої фазової сепарації як ефективного інструменту для подолання природної нестабільності таких емульсій. На початку роботи наведено теоретичний огляд фізико-хімічних механізмів утворення бінарних і тернарних систем «дизель – біоетанол – вода», з особливим наголосом на ролі домішок води, яка виступає ключовим дестабілізуючим фактором, спричиняючи фазовий розшаровування за принципом гідрофільно-гідрофобної взаємодії. Аналізовано вплив термодинамічних параметрів (температури, тиску), співвідношення компонентів, а також молекулярної структури вуглеводневих ланцюгів дизельного палива на критичні точки помутніння та повного розшарування системи. Запропоновано оригінальний технологічний цикл фазової сепарації, що включає етапи попереднього емульгування, контрольованого нагрівання (або охолодження) для прискорення коалесценції крапель, а також гравітаційного або центрифугального розділення фаз. Особливу увагу приділено ролі поверхнево-активних речовин (ПАР) і ко-сольвентів (наприклад, вищих спиртів або естерів жирних кислот), які дозволяють регулювати міжфазний натяг, кінетику сепарації та кінцеву чистоту фаз. Експериментальна частина роботи охоплює серію лабораторних випробувань з варіюванням складу сумішей (від 5 до 30 % об. біоетанолу), температури (від –10 до +50 °C) та концентрації добавок. За допомогою сучасних аналітичних методів — газової хроматографії, спектроскопії ІЧ-діапазону, динамічного світлорозсіювання та реологічних вимірювань — встановлено кількісні залежності між параметрами процесу та стабільністю отриманої дизельної фази. Результати демонструють, що після контрольованої сепарації нижня дизельна фаза містить менше 0,5 % біоетанолу та практично не містить води, що забезпечує її стабільність при зберіганні протягом понад 6 місяців без ознак помутніння чи утворення осаду. Верхня спиртова фаза, збагачена біоетанолом (до 80–90 %), може бути рецикльована або використана як компонент для виробництва етанольних присадок. Енергетичні характеристики стабілізованої дизельної фракції (теплота згоряння, цетанове число, в’язкість) залишаються в межах норм EN 590, що підтверджує можливість її прямого використання в дизельних двигунах без модифікації обладнання. Проведено також оцінку екологічних переваг: зниження викидів сажі на 15–20 %, CO на 10–12 % та NOx на 5–8 % при спалюванні стабілізованої біодизель-етанольної суміші порівняно з чистим дизельним паливом. Обговорено економічні аспекти впровадження технології, включаючи енерговитрати на сепарацію та потенціал інтеграції в існуючі схеми біоетанольного виробництва. У висновках підкреслено, що розроблений метод фазової сепарації відкриває реальні перспективи для масштабного виробництва стабільних біопаливних сумішей дизель–біоетанол, сприяючи зниженню залежності від викопного палива, зменшенню викидів парникових газів і розвитку біоенергетичного сектору в умовах глобального енергетичного переходу.
- 1 January 2026
- Published by Publishing House Helvetica (Publications) in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 2 (157),p. 272-279
METHODS FOR DETERMINING ENVIRONMENTAL PERFORMANCE INDICATORS OF DIESEL ENGINES IN AGRICULTURAL MACHINERY
- 1 January 2026
- Published by Publishing House Helvetica (Publications) in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 2 (157),p. 272-279
METHODS FOR DETERMINING ENVIRONMENTAL PERFORMANCE INDICATORS OF DIESEL ENGINES IN AGRICULTURAL MACHINERY
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 102
MATHEMATICAL AND SIMULATION MODELING OF HEAT AND MASS TRANSFER DURING INFRARED MICRONIZATION OF SOYBEAN GRAIN
The paper presents the results of mathematical and simulation modeling of heat and mass transfer during infrared (IR) micronization of soybean grain. A physico-mathematical model was developed that accounts for the absorption of radiant energy in the surface layer, non-stationary heat conduction within the grain mass, and temperature-dependent moisture diffusion. The process was described using a system of differential equations in spherical coordinates that characterize the temporal and spatial distribution of temperature and moisture. Boundary conditions were formulated based on the energy balance at the grain surface, including absorbed infrared flux, convective heat exchange, and evaporation losses. Numerical implementation was carried out using the implicit finite-difference method in the Python environment with NumPy and SciPy libraries. A simulation model was created that enables variation of structural and operating parameters (heat-flux density, irradiation duration, grain-layer thickness) and prediction of process outcomes. The results include calculated distributions of temperature and moisture in the grain under various processing conditions. It was established that at a heat-flux density of 20–25 kW/m², the central grain temperature reaches 150 ± 5 °C within 80–90 s, ensuring effective inactivation of antinutritional compounds without protein degradation. The average relative deviation between simulated and experimental data did not exceed 6 %, confirming the reliability of the proposed model. The simulation tool provides visualization of thermal and moisture fields and enables determination of optimal operating parameters with regard to energy efficiency and product quality. The developed model can be applied for the design of infrared processing equipment, optimization of operating regimes, and creation of automated control systems for high-protein raw materials.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 102
MATHEMATICAL AND SIMULATION MODELING OF HEAT AND MASS TRANSFER DURING INFRARED MICRONIZATION OF SOYBEAN GRAIN
The paper presents the results of mathematical and simulation modeling of heat and mass transfer during infrared (IR) micronization of soybean grain. A physico-mathematical model was developed that accounts for the absorption of radiant energy in the surface layer, non-stationary heat conduction within the grain mass, and temperature-dependent moisture diffusion. The process was described using a system of differential equations in spherical coordinates that characterize the temporal and spatial distribution of temperature and moisture. Boundary conditions were formulated based on the energy balance at the grain surface, including absorbed infrared flux, convective heat exchange, and evaporation losses. Numerical implementation was carried out using the implicit finite-difference method in the Python environment with NumPy and SciPy libraries. A simulation model was created that enables variation of structural and operating parameters (heat-flux density, irradiation duration, grain-layer thickness) and prediction of process outcomes. The results include calculated distributions of temperature and moisture in the grain under various processing conditions. It was established that at a heat-flux density of 20–25 kW/m², the central grain temperature reaches 150 ± 5 °C within 80–90 s, ensuring effective inactivation of antinutritional compounds without protein degradation. The average relative deviation between simulated and experimental data did not exceed 6 %, confirming the reliability of the proposed model. The simulation tool provides visualization of thermal and moisture fields and enables determination of optimal operating parameters with regard to energy efficiency and product quality. The developed model can be applied for the design of infrared processing equipment, optimization of operating regimes, and creation of automated control systems for high-protein raw materials.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 81
EXPERIMENTAL STUDIES OF OPERATING MODES OF A DIESEL ENGINE USING A THREE-FUEL MIXTURE
The article is devoted to the review and analysis of experimental studies on the operation of diesel internal combustion engines using three-fuel (ternary) mixtures that include conventional diesel fuel, biodiesel (produced from vegetable oils, waste, or algae), and bioethanol. In the context of tightening environmental standards and the need to reduce dependence on fossil resources, the authors examine the impact of such mixtures on key engine operating modes: full and partial load, various speeds, start-up, and stability. Particular emphasis is placed on mixtures with proportions of 5-20% biodiesel and 5-20% bioethanol (for example, B10E10D80 or B10E20D70), which were tested on single- and multi-cylinder engines with turbocharging and direct injection. Data on combustion characteristics are analyzed: prolongation of ignition delay due to the low cetane number of ethanol, increase in peak cylinder pressure and heat release rate (HRR), leading to more intensive premixed combustion. Performance indicators include an increase in brake thermal efficiency (BTE) by 1-4% and brake specific fuel consumption (BSFC) by 2-18%, depending on the mixture composition and load. Experiments using high-speed cameras and pressure sensors confirm a higher HRR peak and pressure closer to top dead center for ternary mixtures compared to pure diesel. Special attention is paid to emissions: reduction of soot by 15-50%, CO by 20-40%, CO₂ by 1-6%, and NO by 11-14% in certain modes, although NOx may increase due to higher combustion temperatures at full loads. The results demonstrate that optimal mixtures (up to 15% ethanol) provide a balance between environmental friendliness and performance without significant engine modifications. The authors note risks such as possible phase separation of the mixture or the impact of ethanol on fuel system components and recommend additional tests for cold start and durability. Overall, the article emphasizes the practical value of three-fuel mixtures for agricultural machinery, freight transport, and generators, contributing to the transition to sustainable energy sources. The obtained data are based on real bench tests and can serve as a basis for further optimization of fuel systems.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 81
EXPERIMENTAL STUDIES OF OPERATING MODES OF A DIESEL ENGINE USING A THREE-FUEL MIXTURE
The article is devoted to the review and analysis of experimental studies on the operation of diesel internal combustion engines using three-fuel (ternary) mixtures that include conventional diesel fuel, biodiesel (produced from vegetable oils, waste, or algae), and bioethanol. In the context of tightening environmental standards and the need to reduce dependence on fossil resources, the authors examine the impact of such mixtures on key engine operating modes: full and partial load, various speeds, start-up, and stability. Particular emphasis is placed on mixtures with proportions of 5-20% biodiesel and 5-20% bioethanol (for example, B10E10D80 or B10E20D70), which were tested on single- and multi-cylinder engines with turbocharging and direct injection. Data on combustion characteristics are analyzed: prolongation of ignition delay due to the low cetane number of ethanol, increase in peak cylinder pressure and heat release rate (HRR), leading to more intensive premixed combustion. Performance indicators include an increase in brake thermal efficiency (BTE) by 1-4% and brake specific fuel consumption (BSFC) by 2-18%, depending on the mixture composition and load. Experiments using high-speed cameras and pressure sensors confirm a higher HRR peak and pressure closer to top dead center for ternary mixtures compared to pure diesel. Special attention is paid to emissions: reduction of soot by 15-50%, CO by 20-40%, CO₂ by 1-6%, and NO by 11-14% in certain modes, although NOx may increase due to higher combustion temperatures at full loads. The results demonstrate that optimal mixtures (up to 15% ethanol) provide a balance between environmental friendliness and performance without significant engine modifications. The authors note risks such as possible phase separation of the mixture or the impact of ethanol on fuel system components and recommend additional tests for cold start and durability. Overall, the article emphasizes the practical value of three-fuel mixtures for agricultural machinery, freight transport, and generators, contributing to the transition to sustainable energy sources. The obtained data are based on real bench tests and can serve as a basis for further optimization of fuel systems.
- Open Access
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 124
MODERN TECHNOLOGIES AND TRENDS FOR THE FUTURE USE OF TRACK BIKES FOR TRANSPORTING SOLID HOUSEHOLD WASTE
The article considers modern technologies and innovative approaches to the introduction of cargo bikes - trucks into the system of collection and transportation of solid household waste in urban and suburban conditions. Growing environmental challenges, the need to reduce greenhouse gas emissions and restricting the use of traditional vehicles in densely populated areas encourage the search for alternative solutions in the field of municipal logistics. One of the promising areas is the use of cargo cargo bikes - trucks, in particular electrified models, capable of ensuring transportation efficiency with minimal negative impact on the environment. The article analyzes in detail the technical capabilities of bikes-trucks, their carrying capacity, energy efficiency and the feasibility of integration into the waste management system. A conceptual model of the use of bikes-trucks in urban infrastructure is proposed, taking into account the factors of population density, route length and road network congestion. A comparative analysis of traditional garbage trucks and bikes-trucks is carried out according to the criteria of economy, environmental friendliness and maneuverability. The results of the research demonstrate that the use of bikes-trucks for transporting solid household waste can reduce CO₂ emissions by 30–50% compared to diesel cars, as well as contribute to reducing noise pollution in cities. In addition, the system has shown effectiveness in areas with narrow streets and traffic restrictions, where traditional transport is of little use. The article also provides recommendations for the development of the infrastructure necessary for the widespread introduction of bikes-trucks, including specialized sites, charging stations and logistics centers. The proposed approach may be useful for local governments, municipal services, as well as engineers and entrepreneurs involved in the development and implementation of environmentally friendly transport systems. The results obtained contribute to the formation of new trends in the field of "green" urban logistics and the development of sustainable infrastructure.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 124
Open AccessMODERN TECHNOLOGIES AND TRENDS FOR THE FUTURE USE OF TRACK BIKES FOR TRANSPORTING SOLID HOUSEHOLD WASTE
The article considers modern technologies and innovative approaches to the introduction of cargo bikes - trucks into the system of collection and transportation of solid household waste in urban and suburban conditions. Growing environmental challenges, the need to reduce greenhouse gas emissions and restricting the use of traditional vehicles in densely populated areas encourage the search for alternative solutions in the field of municipal logistics. One of the promising areas is the use of cargo cargo bikes - trucks, in particular electrified models, capable of ensuring transportation efficiency with minimal negative impact on the environment. The article analyzes in detail the technical capabilities of bikes-trucks, their carrying capacity, energy efficiency and the feasibility of integration into the waste management system. A conceptual model of the use of bikes-trucks in urban infrastructure is proposed, taking into account the factors of population density, route length and road network congestion. A comparative analysis of traditional garbage trucks and bikes-trucks is carried out according to the criteria of economy, environmental friendliness and maneuverability. The results of the research demonstrate that the use of bikes-trucks for transporting solid household waste can reduce CO₂ emissions by 30–50% compared to diesel cars, as well as contribute to reducing noise pollution in cities. In addition, the system has shown effectiveness in areas with narrow streets and traffic restrictions, where traditional transport is of little use. The article also provides recommendations for the development of the infrastructure necessary for the widespread introduction of bikes-trucks, including specialized sites, charging stations and logistics centers. The proposed approach may be useful for local governments, municipal services, as well as engineers and entrepreneurs involved in the development and implementation of environmentally friendly transport systems. The results obtained contribute to the formation of new trends in the field of "green" urban logistics and the development of sustainable infrastructure.