Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alexander Nikolaevich Drozdov has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    RETRACTED: Prospects for the implementation of SWAG-technology to enhance oil recovery at the Rechitskoe field using flue and flare gases

    by Alexander Drozdov, Evgeniya Gorelkina

    See the retraction notice E3S Web of Conferences 549, 00001 (2024), https://doi.org/10.1051/e3sconf/202454900001

  • Preparation for the introduction of SWAG at the fields of PJSC «Tatneft»

    by Bugulma TatNIPIneft, N. A. Knyazeva, A. N. Beregovoy, M. R. Khisametdinov, V. N. Kalinnikov, Almetyevsk Tatneft Pjsc, A. N. Drozdov, E. I. Gorelkina

    The results of laboratory studies of filtration processes on models of a terrigenous reservoir are presented in order to develop optimal compositions for simultaneous water and gas injection and foam assisted water alternating gas injection on the reservoir. The experiments were carried out on rock samples drilled from the core of terrigenous deposits of the Kynovsko-Pashiy horizon. The use of water-gas mixtures with foam-forming surfactants taking into account the field conditions of the fields of PJSC TATNEFT has been established will make it possible to obtain the greatest increase in oil recovery. Studies of the multiplicity and stability of foam systems have shown that non-ionic foaming surfactants TN-PO-1, TN-PO-2 and AF9-12 are best suited for use in FAWAG of the reservoir. The results of studies of the properties of foams depending on the concentration of surfactants are presented, recommendations are given on the use of specific reagents for the implementation of FAWAG, taking into account the conditions of specific fields. The use of SWAG and FAWAG technologies is not only increase oil recovery, but also significantly reduce the volume of irrationally used associated petroleum gas, which is one of the most important tasks for sustainable development goals. Keywords: enhanced oil recovery; filtration studies; simultaneous water and gas injection; foam assisted water alternating gas injection; foaming surfactants.


  • Study of the influence of foaming surfactants on the operation of a multistage centrifugal pump when pumping water-gas mixtures created by an ejector

    by A. N. Drozdov, V. S. Verbitsky, V. A. Shishulin, A. A. Logvinenko, A.V. Fonin, Inc Schlumberger Logelco, E. I. Gorelkina

    When implementing the SWAG technology, the degree of stability of the water-gas mixture plays a key role. A many factors of various nature is known to the suppression of the coalescence of gas bubbles is facilitated. This article presents the results of studies of the effect of surfactants of various compositions and concentrations on the operation of a multistage centrifugal pump when pumping water-gas mixtures. The foaming agent disolvan 4411 is determined to the degree of negative influence of free gas on the characteristics of the pump is significantly reduced. The reagent Neftenol VVD provides operating parameters very close to the characteristics of the pump when using disolvan 4411. The concentration of Neftenol VVD, recommended for addition to the water-gas mixture, has been determined. The expediency of choosing this surfactant is also due to the fact that the use of this reagent improves the injection capacity of wells. Keywords: multistage centrifugal pump; ejector; water-gas mixture; foaming surfactants.


  • Method of measuring the rates of water-gas mixtures injection wells during the exploitation of oil fields

    by A. N. Drozdov, E. I. Gorelkina

    A method and device are proposed for implementing SWAG injection by pumping a water-gas mixture. The proposed technical solution will allow to regulate and measure the flow rate of the mixture injected into each injection well. At the same time, the technology contributes to an increase in oil recovery. The device for implementing the technology makes it possible to withdraw associated gas from the annulus of production wells, which helps to reduce pressure below critical values and prevent disruptions in the supply of well products to the pumps. The device contains diaphragms - measuring devices for controlling the flow of water-gas mixtures, which are injected into selected injection wells by means of booster pumps. Keywords: water-gas mixture; pumping-ejector system; SWAG technology; liquid-gas ejector; pressure-energy haracteristics of ejectors; diaphragm.


  • Operating parameters of the pump-ejector system under SWAG injection at the Samodurovskoye field

    by A. N. Drozdov, E. I. Gorelkina

    This article analyzes the experience of operating the pump-ejector systems in the implementation of SWAG at the Samodurovskoye field. The data of the field tests of the pump-ejector systems, the parameters of the system operation are given, the failure analysis of the constituent elements is described in detail (which contributes to the further development of the SWAG technology and equipment for its implementation). A new technical solution has been proposed, which consists in the concentrated injection of a mixture with the highest gas content into wells that open reservoir zones with the largest residual reserves ("smart" injection). The conducted studies will help to more actively introduce SWAG in the fields. The proposed solution makes it possible to multiply the volume of irrationally used associated petroleum gas (which is otherwise simply flared), thereby increasing oil recovery and profits for oil producing companies. Keywords: carbon footprint reduction; injection of associated petroleum gas into the reservoir; pump-ejector systems; SWAG injection.


  • Open Access

    The Rod String Loads Variation during Short-Term Annular Gas Extraction

    by Alexander Vladimirovich Artyukhov, Anatoliy Andreevich Isaev, Alexander Nikolaevich Drozdov, Yana Alekseevna Gorbyleva, Karina Shamilyevna Nurgalieva

    This paper highlights field studies to determine the nature of variations in the load on the sucker-rod string during short-term gas extraction from the wellbore annulus. The results of step-by-step gas extraction from the annular spaces of the wells of fields developed by PJSC TATNEFT are provided. In the course of investigations, we have obtained both the trends of maximum and minimum loads on the polished rod during annular gas extraction, and the dependence of maximum load increment on the rod string with respect to pump size and pressure variation in the annular space. The analysis of the research data resulted in the elaboration of guidelines for short-term extraction of annular gas from wells operated by the PCP units.


  • Open Access

    Improving the Efficiency of Curved Wells’ Operation by Means of Progressive Cavity Pumps

    by Anatoliy Andreevich Isaev, Mekhrali Mirzali Ogly Aliev, Alexander Nikolaevich Drozdov, Yana Alekseevna Gorbyleva, Karina Shamilyevna Nurgalieva

    This paper proposes a solution to the problem of improving the reliability of the operation of progressive cavity pump units in deviated and directional wells. High dogleg severity significantly contributes to rod breakage; rods often break close to the “elbows” with a dogleg severity of 2 deg/10 m or higher. Statistical analyses were used to identify the frequency of failures and their impact on the reliability of a PCP unit. The design layout and mathematical model for pump rods’ torsional vibrations in the curved section of a wellbore were developed. A simulation of the curved section was performed. This article provides the basic formulas needed to design a rotating rod string using two reduced discs. The creation of an additional crooked section resulted in multiple reductions in the “resonant” rotational speed and rigidity in the mathematical model. Determining the moment of inertia of the reduced discs’ mass made it possible to determine the sucker-rod string’s stiffness, the circular rotation frequency, and the number of sucker-rod revolutions under resonance. The number of reduced discs on the sucker-rod string depends on the curvature pattern. In summary, a centralizer for a rotating string was designed to reduce the vibration and shock effects of rods on the tubing.


  • Open Access

    Development of a pump-ejector system for SWAG injection into reservoir using associated petroleum gas from the annulus space of production wells

    by Alexander N. Drozdov, Еvgeniya I. Gorelkina

    Implementation of SWAG technology by means of water-gas mixtures is a promising method of enhanced oil recovery. The use of associated petroleum gas as a gas component in the water-gas mixture allows to significantly reduce the amount of irrationally consumed gas and carbon footprint. Relevant task is to choose a simple, reliable and convenient equipment that can operate under rapidly changing operating conditions. Such equipment are pump-ejector systems. In order to create water-gas mixture it is proposed to use associated gas from the annulus space. This solution will reduce the pressure in the annulus space of the production well, prevent supply disruption and failure of well equipment. The paper presents a principal technological scheme of the pump-ejector system, taking into account the withdrawal of gas from the annulus space of several production wells. The layout of the proposed system enables more efficient implementation of the proposed technology, which expands the area of its application. Experimental investi-gations of pressure and energy characteristics of the ejector have been carried out. Analysis of the obtained data showed that it was possible to increase the value of maximum efficiency. The possibility of adapting the system in a wide range of changes in operating parameters has been established. Recommendations on selection of a booster pump depending on the values of working pressure and gas content are given.


  • Methodology of selecting aerodynamic pattern of the ejector for injecting water-gas mixture into the formation

    by Владимир Николаевич Калинников, Александр Николаевич Дроздов

    Данная статья посвящена адаптации методики выбора аэродинамической схемы жидкостноструйных компрессоров (эжекторов) К.Г. Донца для использования в составе насосно-эжекторной системы на нагнетательной скважине. Для условий скважины одного из месторождений Татарстана произведен расчёт параметров для выбора эжектора по адаптированной авторами методике, построены напорные и энергетические характеристике по каждой из схем, предложенных К.Г. Донцом, даны обоснованные рекомендации по выбору оптимальной схемы. This article is devoted to the adaptation of the methodology for choosing the aerodynamic pattern of liquid-jet compressors (ejectors) by K.G. Donets for use as part of a pump-ejector system on an injection well. For the conditions of a well of one of the fields in Tatarstan, the parameters for choosing an ejector were calculated according to a technique adapted by the authors; pressure and energy characteristics were constructed for each of the schemes proposed by K.G. Donets, given reasonable recommendations for choosing the optimal pattern.