Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Weon Bae Ko has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and Photocatalytic Activity of Zinc Sulfide and Zinc Sulfide@Multiwalled Carbon Nanotubes Composites

    by Weon Bae Ko, Aksaule Kydyrali, Jeong Won Ko, Ainur Zhambolova, Nurbala Ubaidulayeva, Bazarkhan Imangaliyeva, Meruert Yerkibayeva, Yerdos Ongarbayev

    Zinc sulfide (ZnS) particles and zinc sulfide@multiwalled carbon nanotubes (ZnS@MWCNT) composites were synthesized and characterized using energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Raman spectroscopy. Photocatalytic degradation activity of methylene blue (MB) under ultraviolet (UV) at 254 nm light irradiation was assessed by UV-visible spectroscopy. The photocatalytic degradation efficiency of MB within 300 min reached 78.85% for ZnS particles and 82.85% for the ZnS@MWCNT composites. Therefore, in comparison to the ZnS nanoparticles, the hybrid ZnS@MWCNT composites exhibited higher photocatalytic degradation activity. The kinetics study for photocatalytic degradation of MB using both ZnS particles and hybrid ZnS@MWCNT nanocomposites followed the pseudo-first-order reaction rate law.

  • Open Access

    Synthesis of Ag/ZIF-67 nanocomposite and its catalytic activity for the reduction of various nitrobenzaldehyde isomers

    by Sugyeong Jeon, Jeong Won Ko, Weon Bae Ko

    The Ag/ZIF-67 nanocomposite was prepared by the reaction of cobalt nitrate hexahydrate (Co(NO 3 ) 2 · 6H 2 O) with 2-methylimidazole and silver nitrate (AgNO 3 ). The morphology and structure of Ag/ZIF-67 nanocomposite were investigated by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), Ultraviolet-visible (UV-vis) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy, which indicated that Ag/ZIF-67 composite was successfully synthesized with a rhombic dodecahedron structure. The catalytic activity of the hybrid nanocomposite (Ag/ZIF-67) was investigated toward the reduction of the nitro compounds (2-, 3-, and 4- nitrobenzaldehyde) to their corresponding amino compounds (2-, 3, and 4-aminobenzyl alcohol) in the presence of sodium borohydride (NaBH4) as a reducing agent. The rate for catalytic reduction of nitrobenzaldehyde isomers using Ag/ZIF-67 nanocomposite was in the order: 4-> 2- > 3- nitrobenzaldehyde. The kinetics study showed that the reduction of nitrobenzaldehyde isomers was followed by a pseudo-first-order reaction rate law.

  • Open Access

    Preparation of Nickel-Based Zeolitic Imidazolate Framework-C60 Fullerene Nanowhisker Composite and Its Photocatalytic Degradation of Tetracycline Hydrochloride under UV Light Irradiation

    by Jeong Won Ko, Weon Bae Ko

    Nickel-based zeolitic imidazolate framework (Ni-ZIF) nanoparticles were prepared by dissolving nickel nitrate hexahydrate (Ni(NO3)2·6H2O) and 2-methylimidazole (C4H6N2) in methanol (CH3OH) and stirring the resulting solution for 6 h at 60 °C. The resulting precipitate was collected by centrifugation and dried at 60 °C for 24 h to afford solid-state Ni-ZIF nanoparticles. Next, a Ni-ZIF-C60 fullerene nanowhisker (FNW) composite was prepared by liquid-liquid interfacial precipitation using a solution of Ni-ZIF nanoparticles, C60-saturated toluene, and 2-propanol (C3H8O). In comparison to the Ni-ZIF nanoparticles, the hybrid Ni-ZIF-C60FNW composite exhibited higher photocatalytic activity in the degradation of tetracycline hydrochloride under ultraviolet (UV) irradiation at 254 and 365 nm. The kinetics of the photocatalytic degradation of tetracycline hydrochloride using both the Ni-ZIF nanoparticles and the Ni-ZIF-C60FNW composite under UV irradiation followed the pseudo-first-order reaction rate law.


  • Open Access

    Colorimetric detection of platinum (IV) ions based on triangular silver nanoprism particles in aqueous environmental sample

    by Jeong Won Ko, Se Hwan Park, Weon Bae Ko

    Silver nitrate (AgNO 3 ), trisodium citrate dihydrate (C 6 H 5 Na 3 O 7 · 2H 2 O), sodium borohydride (NaBH 4 ), and L-ascorbic acid (C 6 H 8 O 6 ) were combined in distilled water to create a triangular silver nanoprism particle (AgNPRP) solution. UV-visible (UV-vis) spectroscopy at wavelengths of 350–460 nm and 580–700 nm was observed, and as a result of them, the successful formation of the triangular AgNPRPs was confirmed. The prepared silver nanoprism particles were characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy(SEM), and transmission electron microscopy(TEM) and employed for the colorimetric detection of platinum(IV) ions in an aqueous solution containing Pt 4+ ions. The color of the aqueous silver nanoprism particle solution, containing Pt 4+ ions, changed from blue to light brown before turning colorless. Using UV-vis spectrophotometry, the detection limit of the Pt 4+ ion concentration was determined to be 6.23 μM in an aqueous solution of silver nanoprism particles. The proposed method was applied for detecting Pt 4+ ions in tap water samples.


  • Open Access

    Valorization of Grass Clipping Waste: A Sustainable Approach to Cellulose Extraction and Paper Manufacturing

    by Azamat Taurbekov, Bayan Kaidar, Akniyet Baltabay, Aigerim Imash, Weon-Bae Ko, Jeong-Won Ko, Meiram Atamanov, Zulkhair Mansurov, Gaukhar Smagulova

    This study investigates the physical, mechanical, and structural characteristics of handmade paper samples derived from cellulose extracted from grass clippings using two distinct methods as follows: (1) alkali treatment and (2) alkali treatment followed by bleaching, coupled with the incorporation of barium sulfate as a mineral filler. Our investigation revealed that the handmade paper samples’ densities, moisture contents, and thicknesses varied within the ranges of 0.436 to 0.549 g/cm3, 5.60 to 2.51%, and 0.41 to 0.50 mm, respectively. The tensile strength and folding endurance of the papers produced through alkali treatment with barium sulfate were notably superior to those produced from bleached pulp and barium sulfate. Our analysis indicates that several critical factors, including paper density, thickness, the crystallinity index, and the microfibrillar structure of cellulose, intricately influence the mechanical and strength properties of the samples. Using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques, we identified characteristic cellulose bonds and examined cellulose’s crystalline and amorphous phases. Additionally, the crystallinity index of the samples was determined using both the Segal and peak deconvolution methods. Scanning electron microscopy (SEM) micrographs revealed interconnected networks of cellulose fibers with varying thicknesses and lengths, along with incorporated mineral filler within the cellulose fiber structure. Variations in mineral particle retention were attributed to the presence or absence of cellulose microfibrils. These findings contribute to our understanding of the observed strength characteristics of the paper samples and underscore the potential applications of cellulose derived from grass clippings, especially when combined with barium sulfate as a mineral filler in paper production.


  • Open Access

    Synthesis of graphitic carbon nitride-based nanocomposites and their mechanical properties in epoxy compositions

    by Sugyeong Jeon, Hye Jin Kim, Hyeon-Gook Kim, Meysam Tayebi, Seoyoon Yu, Jong-Hyun Kim, Bongkuk Seo, Choongsun Lim, Weon Bae Ko

    Thermoset epoxy resins are widely used in research and commercial applications. Zeolite imidazole framework-8 (ZIF-8), graphitic carbon nitride (GCN, g-C3N4), and S-doped graphitic carbon nitride (SCN, S-g-C3N4) composites were synthesized as accelerators and their effects on the physical properties of epoxies were examined. An ultrasound-assisted method was used to prepare ZIF-8/GCN and ZIF-8/SCN nanocomposites while g-C3N4 and S-g-C3N4 were prepared from the calcination of melamine and thiourea, respectively. The surface morphology, and particle size were characterized by scanning electron microscopy, and X-ray diffraction. The properties of synthesized nanocomposites were measured using Fourier-transform infrared spectroscopy. After the accelerator was added to the epoxy composites, their activation energies were calculated using differential scanning calorimetry. The tensile strength and flexural strength were measured using a universal testing machine and impact strength was measured by using an Izod impact strength tester. The impact strength of ZIF-8/SCN nanocomposites was enhanced by 45.2%. The storage stability of the epoxy compositions with different catalysts was evaluated by measuring the variation of viscosity with time at a constant temperature.


  • Catalytic activity of C60 fullerene nanowhisker–zeolitic imidazolate framework-67 composite for reduction of 4-nitrophenol

    by Jeong Won Ko, Weon Bae Ko

    The liquid–liquid interfacial precipitation method was used to prepare C60 fullerene nanowhisker (FNW)–zeolitic imidazolate framework-67 (ZIF-67) composite from a ZIF-67 solution, C60-saturated toluene, and isopropyl alcohol. X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to characterize the synthesized C60 FNW-ZIF-67 composite. Its catalytic activity for the reduction of 4-nitrophenol was confirmed by UV–visible (UV-vis) spectroscopy. C60 FNW–ZIF-67 as a catalyst displayed a reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) for 20 min with a rate constant of 1.379 × 10−1 min−1 (at 25 °C), 5.761 × 10−2 min−1 (at 15 °C), and 3.113 × 10−2 min−1 (at 5 °C), respectively. A kinetics study indicated that the hybrid nanocomposite catalyzed the reduction of 4-nitrophenol according to a pseudo-first-order reaction rate equation. The thermodynamic parameters of activation, namely, the enthalpy of activation (ΔH) of 48.966 kJ mol−1, the entropy of activation (ΔS) of −97.479 J mol−1 K−1, and the activation energy (ΔEa) of 51.167 kJ mol−1, were obtained using the Eyring and Arrhenius equations.


  • Methylene blue degradation photocatalytic activity of C 60 fullerene nanowhisker–ZnS:Mn-glycine composites

    by Jeong Won Ko, Se Hwan Park, Weon Bae Ko

    ZnS:Mn-gly and C60 fullerene nanowhisker–ZnS:Mn-gly composites were synthesized and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) and Raman spectroscopy. The photocatalytic degradation of methylene blue (MB) under UV light irradiation was evaluated by UV-vis spectroscopy using ZnS:Mn-gly and C60 fullerene nanowhisker–ZnS:Mn-gly composites. The C60 fullerene nanowhisker–ZnS:Mn-gly composites showed better photocatalytic activity of MB degradation than the ZnS:Mn-gly composites. The kinetics study for the photocatalytic degradation of MB with ZnS:Mn-gly and C60 fullerene nanowhisker–ZnS:Mn-gly composites as photocatalyst under UV irradiation followed a pseudo-first-order reaction rate law. The stability of the photocatalysts after the photocatalytic reaction was studied using XRD and SEM.


  • Synthesis of g-C3N4-C60 fullerene nanowhisker composites and its photocatalytic activity for degradation of rhodamine B

    by Jeong Won Ko, Weon Bae Ko

    Graphitic carbon nitride (g-C3N4) was prepared from melamine (C3H6N6) by annealing it under an electric furnace at 550 °C for 3 h. The g-C3N4 solution was prepared by dissolving powdered g-C3N4 in an aqueous solution with polyvinyl pyrrolidone (PVP). The liquid–liquid interfacial precipitation (LLIP) method was used to prepare the g-C3N4–C60 fullerene nanowhisker composites from g-C3N4 solution, C60-saturated toluene, and isopropyl alcohol (IPA). X-ray diffraction, scanning electron microscopy, Raman spectroscopy, and transmission electron microscopy were used to characterize the g-C3N4–C60 fullerene nanowhisker composites. These were further used for the photocatalytic degradation of rhodamine B (RhB) under ultraviolet (at 254 and 365 nm) irradiation. In addition, UV–vis spectroscopy was utilized to confirm the photocatalytic degradation activity of RhB over the g-C3N4–C60 fullerene nanowhisker composites. Under UV irradiation, the kinetics of photocatalytic degradation of RhB using g-C3N4–C60 fullerene nanowhisker composites followed a pseudo first-order reaction rate law.


  • Catalytic activity of C60 fullerene nanowhisker-silver nanoprism composite for reduction of 2-nitrophenol

    by Jeong Won Ko, Se Hwan Park, Sugyeong Jeon, Hoon Chung, Weon Bae Ko

    A silver nanoprism solution was prepared by reacting silver nitrate (AgNO3), trisodium citrate dihydrate (C6H5Na3O7·2H2O), sodium borohydride (NaBH4), and ascorbic acid (C6H8O6) in distilled water. The successful formation of the silver nanoprisms was confirmed by UV–visible spectroscopy considering the 350–400 nm and 600–650 nm wavelength ranges. The C60 fullerene nanowhisker-silver nanoprism composite was synthesized through a liquid-liquid interfacial precipitation (LLIP) method using C60-saturated toluene, the silver nanoprism solution, and isopropyl alcohol and characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Its catalytic activity was assessed for the reduction of 2-nitrophenol by monitoring the reaction through UV–vis spectroscopy. A kinetics study was conducted, which indicated that the C60 fullerene nanowhisker-silver nanoprism composite catalyzed reduction of 2-nitrophenol follows a pseudo-first-order reaction.