Jeong-Won Ko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jeong-Won Ko has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Weon Bae Ko
Department of Chemistry, Sahmyook University, 815, Hwarang-ro, Nowon-gu, Seoul 01795, Republic of Korea
3 shared publications - Sugyeong Jeon
Department of Convergence Science, Graduate School, Sahmyook University, Seoul 01795, Korea
2 shared publications - Aigerim Imash
Institute of Combustion Problems, 172 Bogenbay Batyr Str., Almaty 050012, Kazakhstan
1 shared publication - Akniyet Baltabay
РГП «Институт проблем горения», Алматы, Казахстан
1 shared publication - Azamat Taurbekov
Institute of Combustion Problems, 172 Bogenbay Batyr Str., Almaty 050012, Kazakhstan
1 shared publication - Bayan Kaidar
Institute of Combustion Problems, 172 Bogenbay Batyr Str., Almaty 050012, Kazakhstan
1 shared publication
Latest Publications
- Open Access
- 31 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6680
Valorization of Grass Clipping Waste: A Sustainable Approach to Cellulose Extraction and Paper Manufacturing
This study investigates the physical, mechanical, and structural characteristics of handmade paper samples derived from cellulose extracted from grass clippings using two distinct methods as follows: (1) alkali treatment and (2) alkali treatment followed by bleaching, coupled with the incorporation of barium sulfate as a mineral filler. Our investigation revealed that the handmade paper samples’ densities, moisture contents, and thicknesses varied within the ranges of 0.436 to 0.549 g/cm3, 5.60 to 2.51%, and 0.41 to 0.50 mm, respectively. The tensile strength and folding endurance of the papers produced through alkali treatment with barium sulfate were notably superior to those produced from bleached pulp and barium sulfate. Our analysis indicates that several critical factors, including paper density, thickness, the crystallinity index, and the microfibrillar structure of cellulose, intricately influence the mechanical and strength properties of the samples. Using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques, we identified characteristic cellulose bonds and examined cellulose’s crystalline and amorphous phases. Additionally, the crystallinity index of the samples was determined using both the Segal and peak deconvolution methods. Scanning electron microscopy (SEM) micrographs revealed interconnected networks of cellulose fibers with varying thicknesses and lengths, along with incorporated mineral filler within the cellulose fiber structure. Variations in mineral particle retention were attributed to the presence or absence of cellulose microfibrils. These findings contribute to our understanding of the observed strength characteristics of the paper samples and underscore the potential applications of cellulose derived from grass clippings, especially when combined with barium sulfate as a mineral filler in paper production.
- 31 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6680
Open AccessValorization of Grass Clipping Waste: A Sustainable Approach to Cellulose Extraction and Paper Manufacturing
This study investigates the physical, mechanical, and structural characteristics of handmade paper samples derived from cellulose extracted from grass clippings using two distinct methods as follows: (1) alkali treatment and (2) alkali treatment followed by bleaching, coupled with the incorporation of barium sulfate as a mineral filler. Our investigation revealed that the handmade paper samples’ densities, moisture contents, and thicknesses varied within the ranges of 0.436 to 0.549 g/cm3, 5.60 to 2.51%, and 0.41 to 0.50 mm, respectively. The tensile strength and folding endurance of the papers produced through alkali treatment with barium sulfate were notably superior to those produced from bleached pulp and barium sulfate. Our analysis indicates that several critical factors, including paper density, thickness, the crystallinity index, and the microfibrillar structure of cellulose, intricately influence the mechanical and strength properties of the samples. Using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques, we identified characteristic cellulose bonds and examined cellulose’s crystalline and amorphous phases. Additionally, the crystallinity index of the samples was determined using both the Segal and peak deconvolution methods. Scanning electron microscopy (SEM) micrographs revealed interconnected networks of cellulose fibers with varying thicknesses and lengths, along with incorporated mineral filler within the cellulose fiber structure. Variations in mineral particle retention were attributed to the presence or absence of cellulose microfibrils. These findings contribute to our understanding of the observed strength characteristics of the paper samples and underscore the potential applications of cellulose derived from grass clippings, especially when combined with barium sulfate as a mineral filler in paper production.
- Open Access
Ultrasound Assisted Synthesis of Gadolinium Oxide-Zeolitic Imidazolate Framework-8 Nanocomposites and Their Optimization for Photocatalytic Degradation of Methyl Orange Using Response Surface Methodology
An ultrasound-assisted method was used to prepare gadolinium oxide (Gd2O3)-zeolitic imidazolate framework (ZIF)-8 nanocomposites. The surface morphology, particle size, and properties of the Gd2O3-ZIF-8 nanocomposites were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy. The synthesized Gd2O3-ZIF-8 nanocomposites were used as a catalyst to degrade methyl orange (MO) under UV light irradiation at 254 nm. The color of the aqueous MO dye solution during photocatalytic degradation was examined using color spectroscopy. Response surface methodology (RSM) using a four-factor Box-Behnken design (BBD) was used to design the experiments and optimize the photocatalytic degradation of MO. The significance of the experimental factors and their interactions were determined using analysis of variance (ANOVA). The efficiency of Gd2O3-ZIF-8 nanocomposites for the photocatalytic degradation of MO reached 98.05% within 40 min under UV irradiation at 254 nm under the experimental conditions of pH 3.3, 0.4 g/L catalyst dose, 0.0630 mM MO concentration, and 431.79 mg/L H2O2 concentration. The kinetics study showed that the MO photocatalytic degradation followed a pseudo-first-order reaction rate law.
Open AccessUltrasound Assisted Synthesis of Gadolinium Oxide-Zeolitic Imidazolate Framework-8 Nanocomposites and Their Optimization for Photocatalytic Degradation of Methyl Orange Using Response Surface Methodology
An ultrasound-assisted method was used to prepare gadolinium oxide (Gd2O3)-zeolitic imidazolate framework (ZIF)-8 nanocomposites. The surface morphology, particle size, and properties of the Gd2O3-ZIF-8 nanocomposites were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy. The synthesized Gd2O3-ZIF-8 nanocomposites were used as a catalyst to degrade methyl orange (MO) under UV light irradiation at 254 nm. The color of the aqueous MO dye solution during photocatalytic degradation was examined using color spectroscopy. Response surface methodology (RSM) using a four-factor Box-Behnken design (BBD) was used to design the experiments and optimize the photocatalytic degradation of MO. The significance of the experimental factors and their interactions were determined using analysis of variance (ANOVA). The efficiency of Gd2O3-ZIF-8 nanocomposites for the photocatalytic degradation of MO reached 98.05% within 40 min under UV irradiation at 254 nm under the experimental conditions of pH 3.3, 0.4 g/L catalyst dose, 0.0630 mM MO concentration, and 431.79 mg/L H2O2 concentration. The kinetics study showed that the MO photocatalytic degradation followed a pseudo-first-order reaction rate law.
- Open Access
Synthesis of Gd2O3 Nanoparticles and Their Photocatalytic Activity for Degradation of Azo Dyes
Gadolinium oxide (Gd2O3) nanoparticles were prepared via the reaction of gadolinium nitrate hexahydrate (Gd (NO3)3·6H2O) and ethylamine (C2H5NH2), and their surface morphology, particle size, and properties were examined by using scanning electron microscopy, X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and ultraviolet visible (UV-vis) spectroscopy. The Gd2O3 nanoparticles were used as the photocatalyst for the degradation of various azo dyes, such as methyl orange (MO), acid orange 7 (AO7), and acid yellow 23 (AY23) under irradiation with UV light. The effect of the experimental parameters (initial concentration of azo dyes, dosage of catalyst, and wavelength of UV light) on the photocatalytic properties of the Gd2O3 nanoparticles were investigated. At a constant H2O2 concentration, the photocatalytic degradation efficiency of the Gd2O3 nanoparticles for various azo dyes was in the order: methyl orange > acid orange 7 > acid yellow 23. The kinetics study showed that the photocatalytic degradation of azo dyes was followed by a pseudo first-order reaction rate law.
Open AccessSynthesis of Gd2O3 Nanoparticles and Their Photocatalytic Activity for Degradation of Azo Dyes
Gadolinium oxide (Gd2O3) nanoparticles were prepared via the reaction of gadolinium nitrate hexahydrate (Gd (NO3)3·6H2O) and ethylamine (C2H5NH2), and their surface morphology, particle size, and properties were examined by using scanning electron microscopy, X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and ultraviolet visible (UV-vis) spectroscopy. The Gd2O3 nanoparticles were used as the photocatalyst for the degradation of various azo dyes, such as methyl orange (MO), acid orange 7 (AO7), and acid yellow 23 (AY23) under irradiation with UV light. The effect of the experimental parameters (initial concentration of azo dyes, dosage of catalyst, and wavelength of UV light) on the photocatalytic properties of the Gd2O3 nanoparticles were investigated. At a constant H2O2 concentration, the photocatalytic degradation efficiency of the Gd2O3 nanoparticles for various azo dyes was in the order: methyl orange > acid orange 7 > acid yellow 23. The kinetics study showed that the photocatalytic degradation of azo dyes was followed by a pseudo first-order reaction rate law.