FSFlorian Roman Steindl

Florian Roman Steindl

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Florian Roman Steindl has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Treatment of Metallurgical Residues by Chemical Modification, Reduction, and Phase Modification for Metal Recovery and Slag Utilization

    by Klaus Doschek-Held, Anna Christine Krammer, Florian Roman Steindl, Christoph Gatschlhofer, Zlatko Raonic, Dominik Wohlmuth

    Advancing material efficiency in the steel and cement industry is essential for achieving climate goals. One approach to addressing this is to increase the provisioning of alternative reactive binder materials from residues, in this case, from the steel industry. Different mixtures of identified residues are evaluated for metal recovery and suitability as supplementary cementitious material. For this purpose, suitable combinations are modeled according to specified quality requirements from the cement industry. These mixtures are heated up to 1600 °C for a targeted reduction of predominantly transition metal oxides and a separation into a mineral fraction. Subsequently, controlled cooling of the molten material is implemented through water granulation. The produced granulate is crushed and sieved, and finally, the metallic and mineral fractions are magnetically separated. The chemical modification, reduction, and phase modification are tested to prevent landfilling and provide alternative secondary resources for the steel and cement industry. According to the results, it is possible to recover metals from metallurgical residues and simultaneously separate the modified mineral fraction as an alternative cement constituent. These findings will be further investigated through additional research to identify the variables that influence and impact/affect the reduction efficiency.


  • On the Prediction of Strength and Optimum Mix-Designs of Mineral-Waste-Based Alkali-Activated Materials

    by Iris Zoegl, Ognjen Rudić, Bettina Ratz, Amr Hassan, Stefanie Radinger, Florian Steindl, Cyrill Valazza-Grengg, Martin Dietzel, Sara Raič

  • Thermally Treated Residues and By-Products as Components of Waste-Based Alkali-Activated Materials

    by Florian R. Steindl, Stefanie Radinger, Amr Hassan, Ognjen Rudic, Katharina Weisser, Anna Krammer, Klaus Doschek-Held, Bettina Ratz, Iris Zögl, Sara Raič, et al.


  • Reactivity of Siderite (FeCO3) in Cementitious Systems and Its Potential Use as a Future SCM

    by Marjorie Pons Pineyro, Isabel Galan, Florian R. Steindl, Marlene Sakoparnig, Florian Mittermayr

  • Mineral Residues and By-Products Upcycled into Reactive Binder Components for Cementitious Materials

    by Florian Roman Steindl, Klaus Doschek-Held, Katharina Weisser, Joachim Juhart, Cyrill Grengg, Dominik Wohlmuth, Florian Mittermayr


  • Open Access

    Synthesis of Zeolites from Fine-Grained Perlite and Their Application as Sorbents

    by Florian Painer, Andre Baldermann, Florian Gallien, Stefanie Eichinger, Florian Steindl, Reiner Dohrmann, Martin Dietzel

    The hydrothermal alteration of perlite into zeolites was studied using a two-step approach. Firstly, perlite powder was transformed into Na-P1 (GIS) or hydro(xy)sodalite (SOD) zeolites at 100 °C and 24 h using 2 or 5 M NaOH solutions. Secondly, the Si:Al molar ratio of the reacted Si-rich solution was adjusted to 1 by Na-aluminate addition to produce zeolite A (LTA) at 65 or 95 °C and 6 or 24 h at an efficiency of 90 ± 9% for Al and 93 ± 6% for Si conversion. The performance of these zeolites for metal ion removal and water softening applications was assessed by sorption experiments using an artificial waste solution containing 4 mmol/L of metal ions (Me2+: Ca2+, Mg2+, Ba2+ and Zn2+) and local tap water (2.1 mmol/L Ca2+ and 0.6 mmol/L Mg2+) at 25 °C. The removal capacity of the LTA-zeolite ranged from 2.69 to 2.86 mmol/g for Me2+ (=240–275 mg/g), which is similar to commercial zeolite A (2.73 mmol/g) and GIS-zeolite (2.69 mmol/g), and significantly higher compared to the perlite powder (0.56 mmol/g) and SOD-zeolite (0.88 mmol/g). The best-performing LTA-zeolite removed 99.8% Ca2+ and 93.4% Mg2+ from tap water. Our results demonstrate the applicability of the LTA-zeolites from perlite for water treatment and softening applications.


  • Open Access

    Filler Effect in Shotcrete

    by Isabel Galan, Lukas Briendl, Maria Thumann, Florian Steindl, Rudolf Röck, Wolfgang Kusterle, Florian Mittermayr

    The effects of fine limestone powder on the early hydration of cementitious systems accelerated by means of alkali-free aluminum sulfate based products, commonly used for shotcrete applications, were investigated in the course of laboratory and real scale tests. In binary (CEM I + limestone) and ternary (CEM I + limestone + slag) systems the addition of fine limestone led to an enhancement of the hydration degree and strength development at early times (<24 h). The formation of ettringite, aluminate hydrates, and C–S–H is affected by the joint action of the setting accelerator and the fine limestone. Accelerator and limestone, in combination with the cement, can be optimized to enhance ettringite and silicate reaction, in some cases coupled with aluminate reaction inhibition, to produce mixes suitable for sprayed concrete applications. Such optimization can help to reduce the cement content in the mixes without compromising the early strength development of the shotcrete.


  • Open Access

    A new test for combined Ca-leaching and sulphate resistance of cementitious materials

    by Florian R. Steindl, Andre Baldermann, Isabel Galan, Marlene Sakoparnig, Martin Dietzel, Florian Mittermayr

    Limitations in the understanding of chemical key controls on concrete damaging mechanisms exacerbate predictions on the long-term performance and durability of cementitious materials. Therefore, the scope of the project “ASSpC Advanced and Sustainable Sprayed Concrete” is to obtain a better mechanistic understanding of the processes underlying deleterious chemical attacks. The herein presented alternative test, loosely following the regulations of the German Building Authority (DIBt) testing procedure (the so-called SVA test) for sulphate resistance, investigates the resistance of concrete mixes with high levels of limestone substitution (35%, 50% and 65%) against sulphate attack in a 10 g L-1 Na2SO4 solution at ambient temperature. Powdered samples were used in favour of prisms or drill cores to accelerate alteration reactions and to eliminate variations in microstructure or porosity. Based on throughout chemical and mineralogical characterisation of the experimental solutions and solid materials, we identified and traced several mineral reactions taking place in a chronological order: (1) dissolution of portlandite and Ca-leaching from C-S-H started immediately at the beginning of the experiments and provided the physicochemical conditions favourable for (2) the precipitation of massive calcite and ettringite during the advanced stage of chemical attack. Ongoing changes in the aqueous composition indicate that C-S-H dissolves incongruently and may be transformed into Si-bearing hydrogarnet. The amount of precipitated ettringite is apparently controlled by the availability of calcium, sulphate and aluminium and the precipitation rate correlates with the superplasticiser demand of the concrete mixes and with the pH of the solution during the nucleation and crystal growth stages, respectively. Our test allows distinguishing between competing reaction paths and kinetics and is capable to provide new insights into concrete damaging mechanisms in sulphate-loaded aqueous environments.