AKAnna Christine Krammer

Anna Christine Krammer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anna Christine Krammer has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermochemical Rock Phosphate Valorisation towards enhanced Phosphorus Recovery and Secondary Cementitious Material Production in a Multiphase Induction Reactor

    by Christoph Gatschlhofer, Zlatko Raonic, Florian Steindl, Cyrill Grengg, Abdelghafour Zaabout, Yassine Taha, Harald Raupenstrauch, Anna Christine Krammer, Lukas Krenn, Michael Meyer, et al.

    Large quantities of phosphorus-containing wastes are generated during phosphate ore beneficiation. Thermochemical treatment offers an alternative route through the valorisation of rock phosphate and/or mining wastes. This study introduces an inductively heated packed bed multiphase reactor suitable for the thermochemical treatment of phosphorus bearing multicomponent materials. Inherently, the reactor concept enables the simultaneous recovery of phosphorus via the gaseous phase and production of a reactive secondary cementitious material in a single step following a zero waste approach. For reactor engineering using rock phosphate as input, a pre characterisation methodology was developed, containing mixture design, thermodynamic modelling of chemical reactions and phase development in FactSageTM, thermal analysis, and thermochemical experiments at 1500 °C and 1600 °C, accompanied by chemical and mineralogical analysis of the input and output materials. The work evaluates the impact by chemical modification of rock phosphate with real mineral wastes on critical process parameters including melting behaviour, chemical reactions and suitability of the obtained mineral fraction. The results underscore the relevance of chemical modification. Rock phosphate itself exhibits inadequate meltability, insufficient hydraulic reactivity for the mineral fraction as well as thermodynamic and kinetic limitations in phosphorus gasification. However, the addition of mineral wastes of proper chemical composition enhances liquid phase formation to temperatures below 1450 °C while simultaneously favouring phosphorus gasification reactions by achieving phosphorus removal rates exceeding 99 %. Additionally, chemical modelling is the key prerequisite for the obtained mineral fraction to reach hydraulic reactivity comparable to ground granulated blast furnace slag.

  • Open Access

    Optimisation of Metal Recovery From Metallurgical Residues Through Carbothermal Reduction: Experimental and Thermodynamic investigation

    by Anna Krammer, Klaus Doschek-Held, Christoph Gatschlhofer, Florian Roman Steindl, Peter Presoly, Zlatko Raonic

    The de-fossilisation of industrial processes, particularly in the steel and cement sectors, accelerates structural changes in material flows. In Austria, the transition from blast furnaces to electric arc furnace steel production will significantly affect the availability and composition of industrial by-products, which are currently used to reduce the clinker factor in the cement industry. This study addresses the valorisation of electric arc furnace slag through carbothermal reduction experiments and thermodynamic calculations. A specially designed mixture was thermochemically treated in a laboratory-scale furnace under an inert atmosphere, followed by rapid cooling. The influence of target temperature, holding time and carbon addition on phase separation, reduction behaviour and the resulting metallic fraction was analysed. Water granulation was feasible for temperatures above 1400 °C. The chemical composition of the metal fraction shows iron contents above 80 wt% and varying degrees of chromium and manganese recovery, depending on process parameters. Longer holding times and higher temperatures led to improved manganese and chromium reduction and higher metal yield. The comparability of the metal fraction analysis with the thermodynamic calculation shows very good agreement for iron and carbon; for chromium and manganese, the trends with increasing temperature are also captured.

  • Open Access

    Mineralwolle-Deponierungsverbot und aktuelle Entwicklungen

    by Alena Vydrenkova, Theresa Magdalena Sattler, Jonathan Krobatschek, Klaus Doschek-Held, Anna Krammer, Roland Pomberger, Klaus Philipp Sedlazeck

    Zusammenfassung: Österreich verfolgt ehrgeizige Ziele im Bereich Klimaschutz und Ressourcenschonung, die sich auch in der Weiterentwicklung des Abfallwirtschaftssystems widerspiegeln. In den vergangenen Jahren wurden schrittweise mehrere Deponierungsverbote eingeführt, um Materialien im Wertstoffkreislauf zu halten und die Kreislaufwirtschaft zu stärken. Beispiele hierfür sind bestimmte Bau- und Abbruchabfälle wie Gipsplatten. Eines der nächsten Materialien, für das ein Deponierungsverbot vorgesehen ist, sind Mineralwolleabfälle bzw. künstliche Mineralfaserabfälle (KMF), deren Ablagerung ab Anfang 2027 nicht mehr zulässig sein wird. Diese Stoffgruppe ist chemisch und physikalisch heterogen und weist aufgrund ihrer faserförmigen Struktur erhebliche technische und gesundheitliche Herausforderungen auf. Derzeit existiert in Österreich noch kein industriell etabliertes Verfahren, das den gesamten Abfallstrom unter Berücksichtigung der potenziellen Gefährdung vollständig verarbeiten kann. Der vorliegende Beitrag gibt einen Überblick über die aktuellen Entwicklungen in Hinblick auf das bevorstehende Deponierungsverbot, präsentiert Ergebnisse einer Umfrage unter österreichischen Sammel- und Behandlungsbetrieben für Mineralwolleabfälle und diskutiert potenzielle Recyclingoptionen im Bereich Closed-Loop- und Open-Loop-Verfahren. Ein besonderer Fokus liegt auf den Chancen, die sich für Österreich ergeben, wenn technologische Innovation, logistische Infrastruktur und politische Rahmenbedingungen erfolgreich miteinander verknüpft werden.


  • Open Access

    Treatment of Metallurgical Residues by Chemical Modification, Reduction, and Phase Modification for Metal Recovery and Slag Utilization

    by Klaus Doschek-Held, Anna Christine Krammer, Florian Roman Steindl, Christoph Gatschlhofer, Zlatko Raonic, Dominik Wohlmuth

    Advancing material efficiency in the steel and cement industry is essential for achieving climate goals. One approach to addressing this is to increase the provisioning of alternative reactive binder materials from residues, in this case, from the steel industry. Different mixtures of identified residues are evaluated for metal recovery and suitability as supplementary cementitious material. For this purpose, suitable combinations are modeled according to specified quality requirements from the cement industry. These mixtures are heated up to 1600 °C for a targeted reduction of predominantly transition metal oxides and a separation into a mineral fraction. Subsequently, controlled cooling of the molten material is implemented through water granulation. The produced granulate is crushed and sieved, and finally, the metallic and mineral fractions are magnetically separated. The chemical modification, reduction, and phase modification are tested to prevent landfilling and provide alternative secondary resources for the steel and cement industry. According to the results, it is possible to recover metals from metallurgical residues and simultaneously separate the modified mineral fraction as an alternative cement constituent. These findings will be further investigated through additional research to identify the variables that influence and impact/affect the reduction efficiency.


  • Thermally Treated Residues and By-Products as Components of Waste-Based Alkali-Activated Materials

    by Florian R. Steindl, Stefanie Radinger, Amr Hassan, Ognjen Rudic, Katharina Weisser, Anna Krammer, Klaus Doschek-Held, Bettina Ratz, Iris Zögl, Sara Raič, et al.


  • Open Access

    Recycling of mineral wool waste as supplementary cementitious material through thermochemical treatment

    by Klaus Doschek-Held, Anna Christine Krammer, Florian Roman Steindl, Theresa Sattler, Joachim Juhart

    Mineral wool is commonly used in construction as thermal insulation material. After the product’s lifetime, it is classified as hazardous waste if no trademark of the European Certification Board for Mineral Wool Products (EUCEB) or the German Institute for Quality Assurance and Labelling (RAL) exists. Mineral Wool Waste (MWW) is typically landfilled in Europe, which is challenging due to its low bulk density and dimensional stability. This circumstance highlights the need for alternative recycling methods that increase the recycling rate of construction and demolition (C&D) waste. This article outlines the recycling opportunities of MWW and focuses on the use of thermochemical treatment of different mixtures of input materials to produce a supplementary cementitious material (SCM). The material characterisation results and investigations on the binder suitability demonstrate that the slag fractions after the thermochemical treatment are well-qualified to be used as reactive binder components. Additionally, a material flow analysis was conducted to estimate the substitution potential of MWW as SCM in the Austrian cement industry.


  • Open Access

    Valorisation of metallurgical residues via carbothermal reduction: A circular economy approach in the cement and iron and steel industry

    by Anna Christine Krammer, Klaus Doschek-Held, Florian Roman Steindl, Katharina Weisser, Christoph Gatschlhofer, Joachim Juhart, Dominik Wohlmuth, Christoph Sorger

    The decarbonisation of the steel and cement industry is of utmost importance in tackling climate change. Hence, steel production in modern integrated steel mills will be shifted towards electric arc furnaces in the future, in turn causing dwindling supplies of blast furnace slag, which is used as a supplementary cementitious material inter alia to reduce the CO2 emissions of cement production. Achieving a sustainable circular steel and building material economy requires the valorisation of currently landfilled steel slags and investigating utilisation options for electric arc furnace slag, which is increasingly being generated. For this purpose, different metallurgical residues and by-products were treated by carbothermal reduction in an inductively heated graphite crucible and then rapidly cooled by wet granulation, yielding a slag fraction similar to granulated blast furnace slag and a metal fraction valuable as a secondary raw material. A spreadsheet-based model was developed to calculate residue combinations to accomplish target compositions of the slag and metal fractions to fulfil previously identified requirements of the targeted cementitious and ferrous products. The results demonstrate the high accuracy of the model in predicting the properties (e.g. main oxide composition) of the generated slag and metal fraction, which fulfil the needed requirements for their use as (i) a supplementary cementitious material and (ii) a secondary raw material in steel production.


  • Recycling of potential hazardous Stone Wool into a non-hazardous New Stone Wool

    by Theresa Sattler, Klaus Doschek-Held, Anna Krammer, Roland Pomberger, Daniel Vollprecht

    Mineral wool products are man-made vitreous fibres (MMVFs), such as glass wool and stone wool, mainly used for thermal and acoustic insulation. Demolition of buildings generates mineral wool (MW) waste. With regard to the intended recycling of materials, the European Union's circular economy package currently foresees a landfill ban for certain waste streams by 2030. As a result, Austria will have a landfill ban for MMVFs from 2027. This paper presents an investigated route for the recycling of MW waste into new mineral wool (wool2wool). The recycling route aims to conserve valuable and limited landfill volume and enables the reduction of primary resource consumption and CO2 emissions. The investigation was based on pH-dependent leaching tests of the fibres according to ÖNORM EN 14429 and hydrogeochemical modelling using LeachXS/Orchestra to identify the solubility-controlling mechanisms. The next step was a thermochemical treatment using correction materials to adjust the chemical composition, followed by rapid cooling through a spinning process. Another focus was on the theoretical determination of the dynamic viscosity to ensure suitable flow behaviour during fibre production. The chemical composition of the mineral wool produced was analysed, and it was shown that the target formulation could not be achieved for all elements within the permitted variation. The variations were due to the dissolution of the kiln lining, which had a more significant influence on the experiment than expected. Overall, the recycling pathway showed a high potential for CO2 savings, resource savings and other environmental benefits by recycling waste that is currently landfilled.