Yifeng Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yifeng Han has a total of 221 co-authors. Here are the top co-authors by number of shared publications:
- Man-Rong Li
Key Laboratory of Bioinorganic and Synthetic Chemistry of Ministry of Education, School of Chemistry, Sun Yat-Sen University, Guangzhou, China
19 shared publications Chuanhui Zhu
Key Laboratory of Bioinorganic and Synthetic Chemistry of Ministry of Education, School of Chemistry
9 shared publicationsShuang Zhao
Key Laboratory of Bioinorganic and Synthetic Chemistry of Ministry of Education, School of Chemistry
9 shared publicationsMeixia Wu
8 shared publications- Meng Wang
Center for Neutron Science and Technology, Guangdong Provincial Key Laboratory of Magnetoelectric Physics and Devices, School of Physics, Sun Yat-sen University, Guangzhou, China
8 shared publications Mark Croft
Department of Physics and Astronomy, Rutgers, The State University of New Jersey, Piscataway, New Jersey 08854, United States
7 shared publications
Latest Publications
- 18 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (12) , 13309-13316
3D Unconventional Superconductivity in Bulk LaO
Lanthanum-based compounds are cornerstones of superconductivity research, yet the La 5d orbitals typically remain empty spectator states far above the Fermi level (EF). While superconductivity has been induced in LaO up to 5.37 K in tensile epitaxy films, the intrinsic ground state of the bulk phase has remained controversial mostly due to synthetic challenges, with early reports suggesting a metallic nature. Here we report the high-pressure and high-temperature synthesis of pure bulk rock-salt LaO and unveil its intrinsic type-II superconductivity with a transition temperature (TC) of ∼6 K at ambient pressure. The bulk TC is further enhanced to 6.9 K in La1-xYxO at x = 0.10, where Y doping leads to lattice contraction (chemical pressing) and a remarkable increase in electron carrier concentration. Strikingly, applying physical pressure further enhances the TC to a maximum of 12.7 K at 20 GPa, the highest TC in lanthanum monochalcogenides LaX (X = S, Se, Te, and O) to date. This pressure dependence is diametrically opposed to the behavior observed in films, and occurs despite a pressure-induced reduction in the density of states at EF─a trend that sharply contradicts the conventional phonon-mediated BCS mechanism. Our first-principles calculations reveal that compressive strain modifies the crystal field splitting to enhance La 5d/O 2p hybridization, fostering a three-dimensional multipocket Fermi surface favorable for spin/orbital fluctuation-mediated pairing. This work clarifies the intrinsic superconductivity of bulk LaO and provides a foundation for designing new rare-earth-based superconductors with higher TC.
- 18 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (12) , 13309-13316
3D Unconventional Superconductivity in Bulk LaO
Lanthanum-based compounds are cornerstones of superconductivity research, yet the La 5d orbitals typically remain empty spectator states far above the Fermi level (EF). While superconductivity has been induced in LaO up to 5.37 K in tensile epitaxy films, the intrinsic ground state of the bulk phase has remained controversial mostly due to synthetic challenges, with early reports suggesting a metallic nature. Here we report the high-pressure and high-temperature synthesis of pure bulk rock-salt LaO and unveil its intrinsic type-II superconductivity with a transition temperature (TC) of ∼6 K at ambient pressure. The bulk TC is further enhanced to 6.9 K in La1-xYxO at x = 0.10, where Y doping leads to lattice contraction (chemical pressing) and a remarkable increase in electron carrier concentration. Strikingly, applying physical pressure further enhances the TC to a maximum of 12.7 K at 20 GPa, the highest TC in lanthanum monochalcogenides LaX (X = S, Se, Te, and O) to date. This pressure dependence is diametrically opposed to the behavior observed in films, and occurs despite a pressure-induced reduction in the density of states at EF─a trend that sharply contradicts the conventional phonon-mediated BCS mechanism. Our first-principles calculations reveal that compressive strain modifies the crystal field splitting to enhance La 5d/O 2p hybridization, fostering a three-dimensional multipocket Fermi surface favorable for spin/orbital fluctuation-mediated pairing. This work clarifies the intrinsic superconductivity of bulk LaO and provides a foundation for designing new rare-earth-based superconductors with higher TC.
- Open Access
3D Unconventional Superconductivity in Bulk LaO
Lanthanum-based compounds are cornerstones of superconductivity research, yet the La-5d orbitals typically remain empty spectator states far above the Fermi level (EF). While superconductivity has been induced in LaO up to 5.37 K in tensile epitaxy films, the intrinsic ground state of the bulk phase has remained controversial mostly due to synthetic challenges, with early reports suggesting a metallic nature. Here we report the high-pressure and high-temperature synthesis of pure bulk rock-salt LaO and unveil its intrinsic type-II superconductivity with a transition temperature (TC) of ~6 K at ambient pressure. The bulk TC is further enhanced to 6.9 K in La1-xYxO at x = 0.10, where Y doping leads to lattice contraction (chemical pressing) and a remarkable increase in electron carrier concentration. Strikingly, applying physical pressure further enhances the TC to a maximum of 12.7 K at 20 GPa, the highest TC in lanthanum monochalcogenides LaX (X = S, Se, Te, and O) to date. This pressure dependence is diametrically opposed to the behavior observed in films, and occurs despite a pressure-induced reduction in the density of states at EF - a trend that sharply contradicts the conventional phonon-mediated BCS mechanism. Our first-principles calculations reveal that compressive strain modifies the crystal field splitting to enhance La-5d/O-2p hybridization, fostering a three-dimensional multi-pocket Fermi surface favorable for spin/orbital fluctuation-mediated pairing. This work clarifies the intrinsic superconductivity of bulk LaO and provides a foundation for designing new rare-earth-based superconductors with higher TC
Open Access3D Unconventional Superconductivity in Bulk LaO
Lanthanum-based compounds are cornerstones of superconductivity research, yet the La-5d orbitals typically remain empty spectator states far above the Fermi level (EF). While superconductivity has been induced in LaO up to 5.37 K in tensile epitaxy films, the intrinsic ground state of the bulk phase has remained controversial mostly due to synthetic challenges, with early reports suggesting a metallic nature. Here we report the high-pressure and high-temperature synthesis of pure bulk rock-salt LaO and unveil its intrinsic type-II superconductivity with a transition temperature (TC) of ~6 K at ambient pressure. The bulk TC is further enhanced to 6.9 K in La1-xYxO at x = 0.10, where Y doping leads to lattice contraction (chemical pressing) and a remarkable increase in electron carrier concentration. Strikingly, applying physical pressure further enhances the TC to a maximum of 12.7 K at 20 GPa, the highest TC in lanthanum monochalcogenides LaX (X = S, Se, Te, and O) to date. This pressure dependence is diametrically opposed to the behavior observed in films, and occurs despite a pressure-induced reduction in the density of states at EF - a trend that sharply contradicts the conventional phonon-mediated BCS mechanism. Our first-principles calculations reveal that compressive strain modifies the crystal field splitting to enhance La-5d/O-2p hybridization, fostering a three-dimensional multi-pocket Fermi surface favorable for spin/orbital fluctuation-mediated pairing. This work clarifies the intrinsic superconductivity of bulk LaO and provides a foundation for designing new rare-earth-based superconductors with higher TC
- 2 September 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (18) , 7277-7286
Heuristic Engineering of Magnetic Mn4Ta2O9 Phases from High-Pressure and High-Temperature Synthesis
- 2 September 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (18) , 7277-7286
Heuristic Engineering of Magnetic Mn4Ta2O9 Phases from High-Pressure and High-Temperature Synthesis
- 9 July 2024
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (14) , 6740-6747
Data-Driven High-Throughput Screening and Experimental Realization of Ag2B(IV)B′(VI)O6 under Negative Chemical-Pressure
- 9 July 2024
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (14) , 6740-6747
Data-Driven High-Throughput Screening and Experimental Realization of Ag2B(IV)B′(VI)O6 under Negative Chemical-Pressure
- 6 July 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (29) , 13468-13473
Thermochemical Properties of High Pressure Neodymium Monoxide
Neodymium monoxide (NdO) is a metastable rare earth oxide material with a unique electronic structure, which has potential applications across various fields such as semiconductors, energy, catalysis, laser technology, and advanced communications. Despite its promising attributes, the thermodynamic properties of NdO remain unexplored. In this study, high pressure, high temperature phases of neodymium monoxide (NdO, with a rocksalt structure) and body-centered cubic (bcc) Nd metal were synthesized at 5 GPa and 1473 K. X-ray photoelectron spectroscopy (XPS) measurements indicate that the Nd 3d peak shifts to higher energy in NdO relative to Nd2O3, suggesting the possibility of complex electronic states in NdO. Formation enthalpies for the reaction 1/3Nd2O3 + 1/3bcc Nd = NdO obtained from high temperature solution calorimetry in molten sodium molybdate and for the reaction dhcp Nd (metal) = bcc Nd (metal) from differential scanning calorimetry are 25.98 ± 8.65 and 5.2 kJ/mol, respectively. Utilizing these enthalpy values, we calculated the pressure-temperature boundary for the reaction 1/3 bcc Nd + 1/3Nd2O3 = NdO, which has a negative P-T slope of -1.68× 10-4 GPa/K. These insights reveal the high pressure behavior of NdO and neodymium metal, underscoring their potential utility in technological applications.
- 6 July 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (29) , 13468-13473
Thermochemical Properties of High Pressure Neodymium Monoxide
Neodymium monoxide (NdO) is a metastable rare earth oxide material with a unique electronic structure, which has potential applications across various fields such as semiconductors, energy, catalysis, laser technology, and advanced communications. Despite its promising attributes, the thermodynamic properties of NdO remain unexplored. In this study, high pressure, high temperature phases of neodymium monoxide (NdO, with a rocksalt structure) and body-centered cubic (bcc) Nd metal were synthesized at 5 GPa and 1473 K. X-ray photoelectron spectroscopy (XPS) measurements indicate that the Nd 3d peak shifts to higher energy in NdO relative to Nd2O3, suggesting the possibility of complex electronic states in NdO. Formation enthalpies for the reaction 1/3Nd2O3 + 1/3bcc Nd = NdO obtained from high temperature solution calorimetry in molten sodium molybdate and for the reaction dhcp Nd (metal) = bcc Nd (metal) from differential scanning calorimetry are 25.98 ± 8.65 and 5.2 kJ/mol, respectively. Utilizing these enthalpy values, we calculated the pressure-temperature boundary for the reaction 1/3 bcc Nd + 1/3Nd2O3 = NdO, which has a negative P-T slope of -1.68× 10-4 GPa/K. These insights reveal the high pressure behavior of NdO and neodymium metal, underscoring their potential utility in technological applications.
- 21 May 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (20) , 205145
Tuning the colossal magnetoresistance in ( by engineering the gap and magnetic properties via doping and pressureThe ferrimagnetic semiconductor keeps the records of colossal magnetoresistance (CMR) and angular magnetoresistance (AMR). Here we report tuning the electronic transport properties via doping and pressure in . As the substitution of nonmagnetic for magnetic , ferrimagnetic transition temperature gradually decreases, while the resistivity increases significantly. At the same time, the CMR and AMR are both enhanced for the low-doping compositions (e.g., and 0.2), which can be attributed to the doping-induced broadening of the band gap and a larger variation range of the resistivity when undergoing a metal-insulator transition by applying a magnetic field along the axis. On the contrary, rises with increasing pressure due to the enhancement of the magnetic exchange interactions until a structural transition occurs at GPa. Meanwhile, the activation gap is lowered under pressure and the magnetoresistance is decreased dramatically above 6 GPa where the gap is closed. At 20 and 26 GPa, weak drops in resistance indicating a superconducting transition at K are observed. The results reveal that doping and pressure are effective methods to tune the activation gap, and correspondingly, the CMR and AMR in nodal-line semiconductors, providing an approach to investigate the magnetoresistance materials for novel spintronic devices.- 21 May 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (20) , 205145
Tuning the colossal magnetoresistance in ( by engineering the gap and magnetic properties via doping and pressureThe ferrimagnetic semiconductor keeps the records of colossal magnetoresistance (CMR) and angular magnetoresistance (AMR). Here we report tuning the electronic transport properties via doping and pressure in . As the substitution of nonmagnetic for magnetic , ferrimagnetic transition temperature gradually decreases, while the resistivity increases significantly. At the same time, the CMR and AMR are both enhanced for the low-doping compositions (e.g., and 0.2), which can be attributed to the doping-induced broadening of the band gap and a larger variation range of the resistivity when undergoing a metal-insulator transition by applying a magnetic field along the axis. On the contrary, rises with increasing pressure due to the enhancement of the magnetic exchange interactions until a structural transition occurs at GPa. Meanwhile, the activation gap is lowered under pressure and the magnetoresistance is decreased dramatically above 6 GPa where the gap is closed. At 20 and 26 GPa, weak drops in resistance indicating a superconducting transition at K are observed. The results reveal that doping and pressure are effective methods to tune the activation gap, and correspondingly, the CMR and AMR in nodal-line semiconductors, providing an approach to investigate the magnetoresistance materials for novel spintronic devices.- 1 May 2024
- Published by Pleiades Publishing Ltd in Journal of Structural Chemistry
- Vol. 65 (5) , 868-881
Synthesis, Crystal Structure, Photophysical Properties, and Antibacterial Activities of the Copper(II) Complex Derived from 4-Chloro-2-{[(2,6-Dimethylphenyl)Imino]Methyl}Phenol
A new asymmetrical Schiff base ligand, (E)-4-chloro-2-{[(2,6-dimethylphenyl)amino] methyl}phenol (HL), and its mononuclear Cu(II) complex are synthesized. The molecular structures and spectroscopic properties of the ligand and its complex are experimentally characterized by single crystal X-ray diffraction, elemental analysis, FTIR, NMR and UV-Vis spectroscopic techniques. The analysis confirms that the Cu atom is generally four-coordinated in the complex by one imino N and one phenolic O atoms of the Schiff-base ligand, adopting a trans-configuration of N2O2 donor atoms around the metal ion, forming a square planar geometry. The density functional calculation is carried out for both HL and the copper(II) complex to investigate changes in the structural parameters and HOMO and LUMO energies. The results demonstrate that the HOMO and the LUMO are effectively separated by the benzene ring of 2,6-dimethylbenzenamine as a donor unit and the benzene ring of 5-chlorosalicylaldehyde as an acceptor unit. The effective HOMO–LUMO separation helps to induce intramolecular charge transfer from the HOMO to the LUMO. The HOMO–LUMO energy gap becomes smaller when the Schiff base ligand is coordinated with the Cu(II) ion, which is most likely to be due to the interaction of copper(II) d orbitals with the HOMO and/or LUMO of the ligand. These theoretical calculations support the experimentally observed results. The biological assay reveals that both the Schiff base and the complex have different antimicrobial activities. The complex has the MIC value of 0.0781 mmol/L against Escherichia coli.
- 1 May 2024
- Published by Pleiades Publishing Ltd in Journal of Structural Chemistry
- Vol. 65 (5) , 868-881
Synthesis, Crystal Structure, Photophysical Properties, and Antibacterial Activities of the Copper(II) Complex Derived from 4-Chloro-2-{[(2,6-Dimethylphenyl)Imino]Methyl}Phenol
A new asymmetrical Schiff base ligand, (E)-4-chloro-2-{[(2,6-dimethylphenyl)amino] methyl}phenol (HL), and its mononuclear Cu(II) complex are synthesized. The molecular structures and spectroscopic properties of the ligand and its complex are experimentally characterized by single crystal X-ray diffraction, elemental analysis, FTIR, NMR and UV-Vis spectroscopic techniques. The analysis confirms that the Cu atom is generally four-coordinated in the complex by one imino N and one phenolic O atoms of the Schiff-base ligand, adopting a trans-configuration of N2O2 donor atoms around the metal ion, forming a square planar geometry. The density functional calculation is carried out for both HL and the copper(II) complex to investigate changes in the structural parameters and HOMO and LUMO energies. The results demonstrate that the HOMO and the LUMO are effectively separated by the benzene ring of 2,6-dimethylbenzenamine as a donor unit and the benzene ring of 5-chlorosalicylaldehyde as an acceptor unit. The effective HOMO–LUMO separation helps to induce intramolecular charge transfer from the HOMO to the LUMO. The HOMO–LUMO energy gap becomes smaller when the Schiff base ligand is coordinated with the Cu(II) ion, which is most likely to be due to the interaction of copper(II) d orbitals with the HOMO and/or LUMO of the ligand. These theoretical calculations support the experimentally observed results. The biological assay reveals that both the Schiff base and the complex have different antimicrobial activities. The complex has the MIC value of 0.0781 mmol/L against Escherichia coli.
- Top Cited Papers
- 29 March 2024
- Published by Springer Nature in Science China Physics, Mechanics & Astronomy
- Vol. 67 (11) , 1-7
Structural transition, electric transport, and electronic structures in the compressed trilayer nickelate La4Ni3O10
- 29 March 2024
- Published by Springer Nature in Science China Physics, Mechanics & Astronomy
- Vol. 67 (11) , 1-7
Top Cited PapersStructural transition, electric transport, and electronic structures in the compressed trilayer nickelate La4Ni3O10
- Open Access
- 14 March 2024
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 121 (12)
Thermodynamic properties and enhancement of diamagnetism in nitrogen doped lutetium hydride synthesized at high pressure
Nitrogen doped lutetium hydride has drawn global attention in the pursuit of room-temperature superconductivity near ambient pressure and temperature. However, variable synthesis techniques and uncertainty surrounding nitrogen concentration have contributed to extensive debate within the scientific community about this material and its properties. We used a solid-state approach to synthesize nitrogen doped lutetium hydride at high pressure and temperature (HPT) and analyzed the residual starting materials to determine its nitrogen content. High temperature oxide melt solution calorimetry determined the formation enthalpy of LuH 1.96 N 0.02 (LHN) from LuH 2 and LuN to be −28.4 ± 11.4 kJ/mol. Magnetic measurements indicated diamagnetism which increased with nitrogen content. Ambient pressure conductivity measurements observed metallic behavior from 5 to 350 K, and the constant and parabolic magnetoresistance changed with increasing temperature. High pressure conductivity measurements revealed that LHN does not exhibit superconductivity up to 26.6 GPa. We compressed LHN in a diamond anvil cell to 13.7 GPa and measured the Raman signal at each step, with no evidence of any phase transition. Despite the absence of superconductivity, a color change from blue to purple to red was observed with increasing pressure. Thus, our findings confirm the thermodynamic stability of LHN, do not support superconductivity, and provide insights into the origins of its diamagnetism.
- 14 March 2024
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 121 (12)
Open AccessThermodynamic properties and enhancement of diamagnetism in nitrogen doped lutetium hydride synthesized at high pressure
Nitrogen doped lutetium hydride has drawn global attention in the pursuit of room-temperature superconductivity near ambient pressure and temperature. However, variable synthesis techniques and uncertainty surrounding nitrogen concentration have contributed to extensive debate within the scientific community about this material and its properties. We used a solid-state approach to synthesize nitrogen doped lutetium hydride at high pressure and temperature (HPT) and analyzed the residual starting materials to determine its nitrogen content. High temperature oxide melt solution calorimetry determined the formation enthalpy of LuH 1.96 N 0.02 (LHN) from LuH 2 and LuN to be −28.4 ± 11.4 kJ/mol. Magnetic measurements indicated diamagnetism which increased with nitrogen content. Ambient pressure conductivity measurements observed metallic behavior from 5 to 350 K, and the constant and parabolic magnetoresistance changed with increasing temperature. High pressure conductivity measurements revealed that LHN does not exhibit superconductivity up to 26.6 GPa. We compressed LHN in a diamond anvil cell to 13.7 GPa and measured the Raman signal at each step, with no evidence of any phase transition. Despite the absence of superconductivity, a color change from blue to purple to red was observed with increasing pressure. Thus, our findings confirm the thermodynamic stability of LHN, do not support superconductivity, and provide insights into the origins of its diamagnetism.