Ola Carlson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ola Carlson has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- David Steen
Department of Electrical Engineering, Chalmers University of Technology, 412 96 Gothenburg, Sweden
3 shared publications - Le Anh Tuan
Department of Electrical Engineering, Chalmers University of Technology, 412 96 Gothenburg, Sweden
3 shared publications - Quanjiang Yu
Department of Mathematical Sciences, Chalmers University of Technology and University of Gothenburg, SE-42196 Gothenburg, Sweden
3 shared publications - Serik Sagitov
Chalmers University of Technology and University of Gothenburg
3 shared publications - Ankur Srivastava
Department of Electrical and Computer Engineering, University of Connecticut, Storrs, CT, USA
2 shared publications - Mohammad Ali Fotouhi Ghazvini
Volvo Car Corporation, 405 31 Göteborg, Sweden
2 shared publications
Latest Publications
- Open Access
- 13 July 2023
- Published by MDPI AG in Algorithms
- Vol. 16 (7) , 334
Optimal Maintenance Schedule for a Wind Power Turbine with Aging Components
Wind power is one of the most important sources of renewable energy available today. A large part of the cost of wind energy is due to the cost of maintaining wind power equipment. When a wind turbine component fails to function, it might need to be replaced under circumstances that are less than ideal. This is known as corrective maintenance. To minimize unnecessary costs, a more active maintenance policy based on the life expectancy of the key components is preferred. Optimal scheduling of preventive maintenance activities requires advanced mathematical modeling. In this paper, an optimal preventive maintenance algorithm is designed using the renewal-reward theorem. In the multi-component setting, our approach involves a new idea of virtual maintenance that allows us to treat each replacement event as a renewal event even if some components are not replaced by new ones. The proposed optimization algorithm is applied to a four-component model of a wind turbine, and the optimal maintenance plans are computed for various initial conditions. The modeling results clearly show the benefit of PM planning compared to a pure CM strategy (about 30% lower maintenance cost).
- 13 July 2023
- Published by MDPI AG in Algorithms
- Vol. 16 (7) , 334
Open AccessOptimal Maintenance Schedule for a Wind Power Turbine with Aging Components
Wind power is one of the most important sources of renewable energy available today. A large part of the cost of wind energy is due to the cost of maintaining wind power equipment. When a wind turbine component fails to function, it might need to be replaced under circumstances that are less than ideal. This is known as corrective maintenance. To minimize unnecessary costs, a more active maintenance policy based on the life expectancy of the key components is preferred. Optimal scheduling of preventive maintenance activities requires advanced mathematical modeling. In this paper, an optimal preventive maintenance algorithm is designed using the renewal-reward theorem. In the multi-component setting, our approach involves a new idea of virtual maintenance that allows us to treat each replacement event as a renewal event even if some components are not replaced by new ones. The proposed optimization algorithm is applied to a four-component model of a wind turbine, and the optimal maintenance plans are computed for various initial conditions. The modeling results clearly show the benefit of PM planning compared to a pure CM strategy (about 30% lower maintenance cost).
- Open Access
- 21 June 2023
- Published by MDPI AG in Preprints.org
Optimal Maintenance Schedule for a Wind Power Turbine with Aging Components
Wind power is one of the most important sources of renewable energy available today. A large part of the wind energy cost is due to the cost of maintaining wind power equipment. When a wind turbine component fails to function, it might need to be replaced under the less than ideal circumstances. This is known as corrective maintenance. To minimize unnecessary costs, a more active maintenance policy based on the life expectancy of the key components is preferred. Optimal scheduling of preventive maintenance activities requires advanced mathematical modeling. In this paper, an optimal preventive maintenance algorithm is designed using the renewal-reward theorem. In the multi-component setting, our approach involves a new idea of virtual maintenance which allows us to treat each replacement event as a renewal event even if some components are not replaced by new ones. The proposed optimization algorithm is applied to a four-component model of a wind turbine and the optimal maintenance plans are computed for various initial conditions. The modeling results showed clearly the benefit of PM planning compared to pure CM strategy (about 30% lower maintenance cost).
- 21 June 2023
- Published by MDPI AG in Preprints.org
Open AccessOptimal Maintenance Schedule for a Wind Power Turbine with Aging Components
Wind power is one of the most important sources of renewable energy available today. A large part of the wind energy cost is due to the cost of maintaining wind power equipment. When a wind turbine component fails to function, it might need to be replaced under the less than ideal circumstances. This is known as corrective maintenance. To minimize unnecessary costs, a more active maintenance policy based on the life expectancy of the key components is preferred. Optimal scheduling of preventive maintenance activities requires advanced mathematical modeling. In this paper, an optimal preventive maintenance algorithm is designed using the renewal-reward theorem. In the multi-component setting, our approach involves a new idea of virtual maintenance which allows us to treat each replacement event as a renewal event even if some components are not replaced by new ones. The proposed optimization algorithm is applied to a four-component model of a wind turbine and the optimal maintenance plans are computed for various initial conditions. The modeling results showed clearly the benefit of PM planning compared to pure CM strategy (about 30% lower maintenance cost).
- 30 May 2023
- Published by Springer Nature
- p. 3-11
Forecasting of Day-Ahead Wind Speed/electric Power by Using a Hybrid Machine Learning Algorithm
- 30 May 2023
- Published by Springer Nature
- p. 3-11
Forecasting of Day-Ahead Wind Speed/electric Power by Using a Hybrid Machine Learning Algorithm
- Open Access
- 28 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Review on Challenges and Solutions in Microgrid Protection
Protection of microgrid has become challenging due to the hosting of various actors such as distributed generation, energy storage systems, information and communication technologies, etc. The main protection challenges in the microgrid are the bi-directional power flow, protection blinding, sympathetic tripping, change in short-circuit level due to different modes of operation, and limited fault current contribution by converter-interfaced sources. This paper presents a comprehensive review of the available microgrid protection schemes which are based on traditional protection principles and emerging techniques such as machine learning, data-mining, wavelet transform, etc. A categorical assessment of the reviewed protection schemes is also presented. The key findings of the paper suggest that the time-domain and communication-assisted protection schemes could be suitable solutions to address the identified protection challenges in the microgrid.
- 28 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Open AccessA Review on Challenges and Solutions in Microgrid Protection
Protection of microgrid has become challenging due to the hosting of various actors such as distributed generation, energy storage systems, information and communication technologies, etc. The main protection challenges in the microgrid are the bi-directional power flow, protection blinding, sympathetic tripping, change in short-circuit level due to different modes of operation, and limited fault current contribution by converter-interfaced sources. This paper presents a comprehensive review of the available microgrid protection schemes which are based on traditional protection principles and emerging techniques such as machine learning, data-mining, wavelet transform, etc. A categorical assessment of the reviewed protection schemes is also presented. The key findings of the paper suggest that the time-domain and communication-assisted protection schemes could be suitable solutions to address the identified protection challenges in the microgrid.
- Open Access
Optimal maintenance schedule for a wind turbine with aging components
Wind power is one of the most important sources of renewable energy. A large part of the wind energy cost is due to the cost of maintaining the wind power equipment. To further reduce the maintenance cost, one can improve the design of the wind turbine components. One can also reduce the maintenance costs by optimal scheduling of the component replacements. The latter task is the main motivation for this paper. When a wind turbine component fails to function, it might need to be replaced under less than ideal circumstances. This is known as corrective maintenance. To minimize the unnecessary costs, a more active maintenance policy based on the life expectancy of the key components is preferred. Optimal scheduling of preventive maintenance activities requires advanced mathematical modeling. In this paper, an optimization model is developed using the renewal-reward theorem. In the multi-component setting, our approach involves a new idea of virtual maintenance which allows us to treat each replacement event as a renewal event even if some components are not replaced by new ones. The proposed optimization algorithm is applied to a four-component model of a wind turbine and the optimal maintenance plans are computed for various initial conditions. The modeling results showed clearly the benefit of PM planning compared to pure CM strategy (about 8.5% lower maintenance cost). When we compare it with another state-of-art optimization model, it shows similar scheduling with a much faster CPU time. The comparison demonstrated that our model is both fast and accurate.
Open AccessOptimal maintenance schedule for a wind turbine with aging components
Wind power is one of the most important sources of renewable energy. A large part of the wind energy cost is due to the cost of maintaining the wind power equipment. To further reduce the maintenance cost, one can improve the design of the wind turbine components. One can also reduce the maintenance costs by optimal scheduling of the component replacements. The latter task is the main motivation for this paper. When a wind turbine component fails to function, it might need to be replaced under less than ideal circumstances. This is known as corrective maintenance. To minimize the unnecessary costs, a more active maintenance policy based on the life expectancy of the key components is preferred. Optimal scheduling of preventive maintenance activities requires advanced mathematical modeling. In this paper, an optimization model is developed using the renewal-reward theorem. In the multi-component setting, our approach involves a new idea of virtual maintenance which allows us to treat each replacement event as a renewal event even if some components are not replaced by new ones. The proposed optimization algorithm is applied to a four-component model of a wind turbine and the optimal maintenance plans are computed for various initial conditions. The modeling results showed clearly the benefit of PM planning compared to pure CM strategy (about 8.5% lower maintenance cost). When we compare it with another state-of-art optimization model, it shows similar scheduling with a much faster CPU time. The comparison demonstrated that our model is both fast and accurate.
- Top Cited PapersOpen Access
- 25 October 2019
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 366 (6464) , eaau2027-+
Grand challenges in the science of wind energy
A multifaceted future for wind power: Modern wind turbines already represent a tightly optimized confluence of materials science and aerodynamic engineering. Veers et al. review the challenges and opportunities for further expanding this technology, with an emphasis on the need for interdisciplinary collaboration. They highlight the need to better understand atmospheric physics in the regions where taller turbines will operate as well as the materials constraints associated with the scale-up. The mutual interaction of turbine sites with one another and with the evolving features of the overall electricity grid will furthermore necessitate a systems approach to future development. Science , this issue p. eaau2027
- 25 October 2019
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 366 (6464) , eaau2027-+
Top Cited PapersOpen AccessGrand challenges in the science of wind energy
A multifaceted future for wind power: Modern wind turbines already represent a tightly optimized confluence of materials science and aerodynamic engineering. Veers et al. review the challenges and opportunities for further expanding this technology, with an emphasis on the need for interdisciplinary collaboration. They highlight the need to better understand atmospheric physics in the regions where taller turbines will operate as well as the materials constraints associated with the scale-up. The mutual interaction of turbine sites with one another and with the evolving features of the overall electricity grid will furthermore necessitate a systems approach to future development. Science , this issue p. eaau2027
- Open Access
- 9 September 2019
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 4 (3) , 465-477
Field-test of wind turbine by voltage source converter
One of the main challenges for wind energy development is making wind turbines efficient in terms of costs whilst maintaining safe and reliable operation. An important design criterion is to fulfil the grid codes given by the transmission system operators. Grid codes state how wind farms must perform when connected to the grid under normal and abnormal conditions. In this regard, it is well-known that not all technical requirements can be tested by using actual impedance-based test equipment. Therefore, test equipment comprising a fully rated voltage source converter in back-to-back configuration is proposed. Thanks to the full controllability of the applied voltage in terms of magnitude, phase and frequency, the use of voltage-source-converter-based test equipment provides more flexibility compared to actual test systems. As demonstrated in this paper, the investigated test device not only can recreate any type of fault, including its recovery ramp, but also can carry out steady-state tests, such as frequency variations and frequency scan, on the test object. Finally, test results from a 4.1 MW wind turbine and 8 MW test equipment located in Gothenburg, Sweden, are shown to validate the investigated grid code test methodology.
- 9 September 2019
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 4 (3) , 465-477
Open AccessField-test of wind turbine by voltage source converter
One of the main challenges for wind energy development is making wind turbines efficient in terms of costs whilst maintaining safe and reliable operation. An important design criterion is to fulfil the grid codes given by the transmission system operators. Grid codes state how wind farms must perform when connected to the grid under normal and abnormal conditions. In this regard, it is well-known that not all technical requirements can be tested by using actual impedance-based test equipment. Therefore, test equipment comprising a fully rated voltage source converter in back-to-back configuration is proposed. Thanks to the full controllability of the applied voltage in terms of magnitude, phase and frequency, the use of voltage-source-converter-based test equipment provides more flexibility compared to actual test systems. As demonstrated in this paper, the investigated test device not only can recreate any type of fault, including its recovery ramp, but also can carry out steady-state tests, such as frequency variations and frequency scan, on the test object. Finally, test results from a 4.1 MW wind turbine and 8 MW test equipment located in Gothenburg, Sweden, are shown to validate the investigated grid code test methodology.
- Open Access
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Chalmers Campus as a Testbed for Intelligent Grids and Local Energy Systems
This paper presents an overview of a testbed for intelligent distribution grids, local energy systems, and energy flexible buildings, which is being developed at the campus of Chalmers University of Technology in Gothenburg, Sweden. It describes the test sites, the functionalities, and the planned demonstration activities within the scope of on-going research projects. The proposed demonstrations include a local energy market platform, energy management solutions for microgrids and smart buildings, as well as voltage control in distribution grids. The paper aims to show how the physical energy supply systems of the university are being adapted to integrate the communication and control set-ups that provide the technical requirements for smart grid interoperability. As an example, the on-site implementation of remote battery control is presented, where initial results show the feasibility and potential benefits of the external control. Finally, challenges and lessons learned during the development of the testbed are highlighted.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Open AccessChalmers Campus as a Testbed for Intelligent Grids and Local Energy Systems
This paper presents an overview of a testbed for intelligent distribution grids, local energy systems, and energy flexible buildings, which is being developed at the campus of Chalmers University of Technology in Gothenburg, Sweden. It describes the test sites, the functionalities, and the planned demonstration activities within the scope of on-going research projects. The proposed demonstrations include a local energy market platform, energy management solutions for microgrids and smart buildings, as well as voltage control in distribution grids. The paper aims to show how the physical energy supply systems of the university are being adapted to integrate the communication and control set-ups that provide the technical requirements for smart grid interoperability. As an example, the on-site implementation of remote battery control is presented, where initial results show the feasibility and potential benefits of the external control. Finally, challenges and lessons learned during the development of the testbed are highlighted.
- Open Access
- 1 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. ii, 1-5
Integration Aspects of Full Converter Wind Turbines and the Impact on Long-term Voltage Stability
This paper examines how various integration aspects of full converter wind turbines, such as grid code design, control aspects, and placement of turbines, impact the long-term voltage stability of a power system. The simulations are conducted on a modified version of the Nordic32 test system. Different cases have been analyzed and show, for example, that if over-dimensioning of converters is implemented, it is mainly the converters' current capacity that should be increased since the voltage limitation of converters seldom is reached during voltage instability events. Furthermore, a restrictive reactive control scheme is tested, with the aim of minimizing the wear and maintenance of converter components. Although found to generally reduce the voltage stability, the proposed control scheme could be adopted during specific conditions where the local need of voltage support is low. The placement of larger wind farms was found to have the largest impact, both on long-term voltage stability of the system itself, and on the effect that the analyzed design and control aspects had on the system stability. Consequently, the placement of WFs is found be an important factor to consider when designing ancillary services and grid codes for wind power.
- 1 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. ii, 1-5
Open AccessIntegration Aspects of Full Converter Wind Turbines and the Impact on Long-term Voltage Stability
This paper examines how various integration aspects of full converter wind turbines, such as grid code design, control aspects, and placement of turbines, impact the long-term voltage stability of a power system. The simulations are conducted on a modified version of the Nordic32 test system. Different cases have been analyzed and show, for example, that if over-dimensioning of converters is implemented, it is mainly the converters' current capacity that should be increased since the voltage limitation of converters seldom is reached during voltage instability events. Furthermore, a restrictive reactive control scheme is tested, with the aim of minimizing the wear and maintenance of converter components. Although found to generally reduce the voltage stability, the proposed control scheme could be adopted during specific conditions where the local need of voltage support is low. The placement of larger wind farms was found to have the largest impact, both on long-term voltage stability of the system itself, and on the effect that the analyzed design and control aspects had on the system stability. Consequently, the placement of WFs is found be an important factor to consider when designing ancillary services and grid codes for wind power.
- Open Access
- 23 May 2018
- Published by Copernicus GmbH in EGUsphere
- Vol. 2018, 1-19
Field-Test of Wind Turbine by Voltage Source Converter
One of the main challenge for the wind energy development is to make the wind turbines efficient in respect of costs while maintaining a safe and reliable operation. An important design criterion is the fulfilment of Grid Codes given by transmission system operators (TSO). The Grid Codes state how wind turbines/farms must behave when connected to the grid in normal and abnormal conditions. In this regard, it is well known that not all the technical requirements can be tested by using the actual impedance-based testing equipment. For this reason, a new type of testing equipment which comprises the use of fully-rated Voltage Source Converter (VSC) in back-to-back configuration is proposed. Thanks to the full controllability of the applied voltage in terms of magnitude, phase and frequency, the use of VSC-based testing equipment, provides more flexibility as compared with actual testing systems. In addition, the AC grid is decoupled from the tested object when performing the test; meaning that the strength of the grid is not a major limitation. Finally, test results of a 4 MW wind turbine and an 8 MW test equipment, located in Gothenburg, Sweden, are shown in order to validate the investigated grid code testing methodology.
- 23 May 2018
- Published by Copernicus GmbH in EGUsphere
- Vol. 2018, 1-19
Open AccessField-Test of Wind Turbine by Voltage Source Converter
One of the main challenge for the wind energy development is to make the wind turbines efficient in respect of costs while maintaining a safe and reliable operation. An important design criterion is the fulfilment of Grid Codes given by transmission system operators (TSO). The Grid Codes state how wind turbines/farms must behave when connected to the grid in normal and abnormal conditions. In this regard, it is well known that not all the technical requirements can be tested by using the actual impedance-based testing equipment. For this reason, a new type of testing equipment which comprises the use of fully-rated Voltage Source Converter (VSC) in back-to-back configuration is proposed. Thanks to the full controllability of the applied voltage in terms of magnitude, phase and frequency, the use of VSC-based testing equipment, provides more flexibility as compared with actual testing systems. In addition, the AC grid is decoupled from the tested object when performing the test; meaning that the strength of the grid is not a major limitation. Finally, test results of a 4 MW wind turbine and an 8 MW test equipment, located in Gothenburg, Sweden, are shown in order to validate the investigated grid code testing methodology.