GZGuangming Zhu

Guangming Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guangming Zhu has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Latest Advances in Mechanically Robust Self‐Healing Polyurea Based on Dynamic Chemistry

    by Yujia Hao, Guangming Zhu

    Polyureas are widely used in many fields such as civil, industry, and defense due to their excellent performance and structural adjustable properties. The development of self‐healing polyurea materials with high strength and toughness, key connotations of their advanced applications, is both fascinating and challenging because these properties are associated with conflicting structural features, making it difficult to optimize these contradictory properties in a single material. In this review, the relationship between polyurea structure and performance is discussed, and the design strategy of self‐healing polyurea networks based on dynamic interactions that allow for balancing high mechanical performance and repairability is delineated from a molecular design point of view. Lastly, a summary of the potential applications of polyurea in the fields of sensing, protective coatings, and recycling, as well as possible future challenges, is presented.


  • Shape reconfiguration and functional self-healing of thermadapt shape memory epoxy vitrimers by exchange reaction of disulfide bonds

    by Ben Li, Guangming Zhu, Yujia Hao, Tianning Ren

    Epoxy-based shape memory materials still face many challenges from preparation to application. Designing dynamic covalent bonds into the cross-linked network of epoxy can bring many new properties to them, which is expected to solve some of the problems faced. In this paper, epoxy vitrimers with different contents of exchangeable disulfide bonds were synthesized by the polymerization of hydrogenated epoxy resins with diacids containing dynamic disulfide bonds. The effect of disulfide bond content on the properties of epoxy vitrimers was systematically studied. By activating the exchange reaction of disulfide bonds, the permanent shape of epoxy vitrimers can be reconfigured, even from two to three dimensions. The time required for reconfiguring is affected by the content of disulfide bonds, the more disulfide bonds, the shorter the time required. The epoxy vitrimers with more content of disulfide bonds were found to have lower recovery ratio loss after the same shape memory cycle by thermal bending experiments. More importantly, the epoxy vitrimers with more content of disulfide bonds also exhibited better functional self-healing properties. The decreased recovery ratio can be healed by periodic heat treatment, thus ensuring that the epoxy vitrimers perform more shape memory cycles and maintain a high shape recovery ratio. These experimental results will serve as a basis for expanding the range of applications and prolonging the service life of epoxy-based shape memory materials.


  • An electric‐driven variable stiffness morphing skin: Preparation and properties

    by Xiaoming Ren, Guangming Zhu

    With variable stiffness properties, shape memory polymers (SMPs) become the most promising materials of morphing skins. In this article, based on hydro‐epoxy resin/carboxyl‐terminated butadiene acrylonitrile/maleic anhydride matrix, composite morphing skins are prepared by doping conductive carbon black (CB). By adjusting the content of CB, in‐plane and out‐of‐plane properties of skins can be adjusted. Because of the in‐plane tensile stress acting on the skin during flight, tensile test is required. The results indicate that in‐plane tensile strength of skin decreases as the CB content increases. In electrical resistivity test, the electronic resistivity of skin decreases sharply at a low‐percolation threshold (1.9 wt%) and then maintains a low and steady level. As for out‐of‐plane properties, thermo‐ and electro‐active shape memory test are studied. All of the selected typical composite skins have 100% thermo‐driven shape recovery rate. Some skins have 100% thermo‐driven shape fixity rate and fast electro‐active shape recovery speed. When the CB content is 2.6 or 3 wt%, the skin can recover its out‐of‐plane deformed shape completely at 150 V. Benefit from easy control and remote drive, the composite SMP skins are proved to be a promising candidate material for morphing skins.


  • A variable stiffness morphing skin: preparation and properties

    by Xiaoming Ren, Guangming Zhu

    In the course of flight, morphing skins play an important role in morphing aircrafts. Shape memory polymer (SMP) with variable stiffness performance is a good candidate material for skin. In this paper, a series of SMP morphing skins were prepared from hydro-epoxy resin, carboxyl-terminated butadiene acrylonitrile (CTBN) and maleic anhydride. By adjusting molecular weight and content of CTBN, in-plane properties and out-of-plane properties of morphing skins can be adjusted. Due to the in-plane tensile stress acting on the skin during flight, tensile test was carried out to study its in-plane performance. After testing, skin can resist maximum in-plane tensile strength of 63.7 MPa. As for the out-of-plane performance of the skin, shape memory test was studied in this paper. All morphing skins have 100% shape fixity rate (Rf) and fast shape recovery rate (Rr). When toughened by CTBN of 10% of 4000 molecular weight with a mass fraction, the skin can recover its out-of-plane deformed shape in 33 s. The SMP skins were proved to be a promising candidate for morphing skins.


  • An investigation on the performance of epoxy vitrimers based on disulfide bond

    by Ben Li, Guangming Zhu, Yujia Hao, Tianning Ren

    The research for self‐healing epoxy vitrimers has attracted a lot of attention over the years. However, due to the special structure of the epoxy molecular chain, which limits its movement ability, epoxy vitrimers usually need to be healed under high temperature and pressure. So it is relatively difficult to healing. Here, a new type of cross‐linked network is obtained by cross‐linking hydrogenated bisphenol A epoxy resin and polypropylene glycol diglycidyl ether (PPGDGE) as hard and soft segments with an amine curing agent containing disulfide bonds. The addition of PPGDGE can improve the mobility of the molecular chains in the cross‐linked network we designed, thereby obtaining a novel epoxy vitrimers with better healing properties. The effect of PPGDGE content on the mechanical properties and self‐healing properties of the material was studied. The ideal sample HEP‐3 has a good tensile strength (33.4 MPa) and a completely broken sample can achieve a good self‐healing rate (71.5%) at 100°C for 3 h without high pressure. In addition, the ideal sample also has excellent shape memory properties (shape memory fixity ratio Rf = 97.1%, shape recovery ratio Rr = 94.9%). Moreover, due to the existence of the dynamic disulfide bond introduced by the curing agent 2‐aminophenyl disulfide, compared with traditional thermosetting epoxy resins, epoxy vitrimers prepared by us can be reshaped or postprocessed like thermoplastic polymers under specific conditions. These characteristics will become the guarantee for expanding the application range of epoxy materials.


  • Improvement of interfacial interactions in CF/PEEK composites by an s‐PSF/graphene oxide compound sizing agent

    by Tianning Ren, Guangming Zhu, Xiao Hou, Ben Li, Yujia Hao

    The interfacial interactions of carbon fiber (CF)‐reinforced polymer composites is a key factor affecting the overall performance of the material. In this work, we prepared a sulfonated poly(ether sulfone)–graphene oxide mixed sizing agent to modify the interface of CF/PEEK composites and improve the interfacial properties between the PEEK matrix and CF. Results showed that the mechanical and interfacial properties of CF/PEEK composites are improved by the sizing agent. Specifically, the flexural strength, flexural modulus and interlaminar shear strength of the materials reached 847.29 MPa, 63.77 GPa, and 73.17 MPa, respectively. Scanning electron microscopy confirmed markedly improved adhesion between the resin matrix and fibers. This work provides a simple and effective method for the preparation of high‐performance CF/PEEK composites, which can improve the performance of composites without degrading the mechanical property of pristine CF.


  • Improving Interfacial Interactions of CF/PEEK Composites with Sulfonated Polyether Sulfone

    by Tianning Ren, Guangming Zhu, Xiaoming Ren, Renjie Tian, Ben Li


  • The improved interface performance between carbon fiber and poly(ether‐ether‐ketone) by sulfonated polyether sulfone (s‐PSF) sizing agent with different sulfonation degree

    by Tianning Ren, Guangming Zhu, Xiao Hou

    The effects of sulfonated polyether sulfone (s‐PSF) with different sulfonation degrees on the interfacial properties of carbon fiber (CF)/poly(ether‐ether‐ketone) (PEEK) composites were investigated systematically. The performance of the modified CF and the corresponding CF/PEEK composites and was tested and characterized. Test results show that the CF surface polarity increases, the surface contact angle decreases, and the surface free energy increases with the increase in the s‐PSF sulfonation degree. Scanning electron microscopy analysis shows that the increase in the sulfonation degree of s‐PSF is beneficial to improve the interface between CF and PEEK. This condition can be ascribed to the hydrogen bonding force between the s‐PSF sulfonic acid group and the polar functional group on the surface of the modified CF and the compatibility between s‐PSF and PEEK. In terms of physical properties, the thermal and mechanical properties of CF/PEEK composite are improved with the increase in s‐PSF sulfonation degree. The interlaminar shear strength, flexural strength, and modulus of CF/PEEK composites increase by 60.16%, 30.27%, and 19.30%, respectively.


  • The effects of PCL diol molecular weight on properties of shape memory poly(ε‐caprolactone) networks

    by G. Tian, G. Zhu, T. Ren, Y. Liu, K. Wei, Y. X. Liu

    Shape memory poly(ε‐caprolactone) (PCL) networks with different molecular weights of PCL diol were prepared via thiol–ene reaction in this work. The highly efficient thiol–ene reaction ensured a uniform distribution of PCL chains between crosslinker, contributing well‐defined network architecture with good mechanical and shape memory properties. 1H NMR spectra were used to confirm that PCL diol was completely converted into acrylate‐terminated PCL. Gel content experiment and Fourier‐transform infrared showed that almost all samples exhibited virtually the complete crosslinking network due to the highly selective thiol–ene reaction between acrylate‐terminated PCL and tetrathiol crosslinker. Differential scanning calorimetry and X‐ray diffraction tests revealed that the melting temperature and crystallinity of the prepared PCL networks by using high molecular weight of PCL diol displayed a higher result compared to ones using low molecular weight. The dynamic mechanical analyzer results revealed that the storage modulus of the network dropped evidently across the thermal transition, these characteristics of the PCL network indicated that all exhibited a good shape memory effect. The shape fixing ability was kind of being affected by the PCL diol molecular weight, while the shape recovery ratio of all samples can almost reach 99% irrespective of the length of PCL diol. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47055.