The improved interface performance between carbon fiber and poly(ether‐ether‐ketone) by sulfonated polyether sulfone (s‐PSF) sizing agent with different sulfonation degree
- 19 December 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (19)
Abstract
The effects of sulfonated polyether sulfone (s‐PSF) with different sulfonation degrees on the interfacial properties of carbon fiber (CF)/poly(ether‐ether‐ketone) (PEEK) composites were investigated systematically. The performance of the modified CF and the corresponding CF/PEEK composites and was tested and characterized. Test results show that the CF surface polarity increases, the surface contact angle decreases, and the surface free energy increases with the increase in the s‐PSF sulfonation degree. Scanning electron microscopy analysis shows that the increase in the sulfonation degree of s‐PSF is beneficial to improve the interface between CF and PEEK. This condition can be ascribed to the hydrogen bonding force between the s‐PSF sulfonic acid group and the polar functional group on the surface of the modified CF and the compatibility between s‐PSF and PEEK. In terms of physical properties, the thermal and mechanical properties of CF/PEEK composite are improved with the increase in s‐PSF sulfonation degree. The interlaminar shear strength, flexural strength, and modulus of CF/PEEK composites increase by 60.16%, 30.27%, and 19.30%, respectively.Keywords
This publication has 29 references indexed in Scilit:
- Design of microwave plasma and enhanced mechanical properties of thermoplastic composites reinforced with microwave plasma-treated carbon fiber fabricComposites Part B: Engineering, 2014
- Effect of coupling agent on natural fibre in natural fibre/polypropylene composites on mechanical and thermal behaviourComposites Part B: Engineering, 2014
- Preparation of carbon nanotube/carbon fiber hybrid fiber by combining electrophoretic deposition and sizing process for enhancing interfacial strength in carbon fiber compositesComposites Science and Technology, 2013
- Interfacial Microstructure and Properties of Carbon Fiber Composites Modified with Graphene OxideACS Applied Materials & Interfaces, 2012
- Influence of cold remote nitrogen oxygen plasma treatment on carbon fabric and its composites with specialty polymersJournal of Materials Science, 2010
- Impact behavior of short and continuous fiber-reinforced polyester compositesJournal of Reinforced Plastics and Composites, 2010
- Effect of epoxy coatings on carbon fibers during manufacture of carbon fiber reinforced resin matrix compositesMaterials & Design (1980-2015), 2010
- Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 compositesApplied Surface Science, 2008
- Wear of PEEK composites related to their mechanical performancesTribology International, 2004
- Comparison of new PEEK® seals with traditional helicoflex for ultra high vacuum applicationsVacuum, 2003