Shrikantha Sasihithlu Rao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shrikantha Sasihithlu Rao has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Mervin A. Herbert
National Institute of Technology Karnataka (NITK), Surathkal, Karnataka, India
5 shared publications - Arun Kumar Shettigar
Department Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, Mangaluru 575025, India
3 shared publications - Prakash Vinod
Central Manufacturing Technology Institute, Bengaluru, Karnataka, India
2 shared publications - Ramakrishna N. Hegde
Department of Automobile Engineering, Srinivas Institute of Technology, Mangaluru, India
2 shared publications - Rana Pratap Reddy
Reva Institute of Technology, Yelahanka, Bangalore, India
2 shared publications - Tadigotla Narendra Reddy
Central Manufacturing Technology Institute, Bengaluru, Karnataka, India
2 shared publications
Latest Publications
- Open Access
- 1 May 2025
- Published by Central Manufacturing Technology Institute in Manufacturing Technology Today (MTT)
- Vol. 24 (5-6) , 9-14
ROS-based 2D LiDAR SLAM for development of autonomous mobile robot
This research paper presents the development of an autonomous mobile robot (AMR), utilizing a Raspberry Pi integrated with the Robot Operating System (ROS) and a 2D LiDAR sensor for Simultaneous Localization and Mapping (SLAM). The primary objective of this work is to demonstrate the feasibility of creating an AMR that can effectively map its surroundings and pave the way for future enhancements in autonomous navigation. The research details the successful implementation of ROS tools, including Cartographer and Hector SLAM, to accurately map the robot’s environment. Building upon this foundation, the paper outlines the planned expansion of the robot’s capabilities through the integration of additional sensors, such as an IMU, to enable self-navigation and advanced autonomous functionalities.
- 1 May 2025
- Published by Central Manufacturing Technology Institute in Manufacturing Technology Today (MTT)
- Vol. 24 (5-6) , 9-14
Open AccessROS-based 2D LiDAR SLAM for development of autonomous mobile robot
This research paper presents the development of an autonomous mobile robot (AMR), utilizing a Raspberry Pi integrated with the Robot Operating System (ROS) and a 2D LiDAR sensor for Simultaneous Localization and Mapping (SLAM). The primary objective of this work is to demonstrate the feasibility of creating an AMR that can effectively map its surroundings and pave the way for future enhancements in autonomous navigation. The research details the successful implementation of ROS tools, including Cartographer and Hector SLAM, to accurately map the robot’s environment. Building upon this foundation, the paper outlines the planned expansion of the robot’s capabilities through the integration of additional sensors, such as an IMU, to enable self-navigation and advanced autonomous functionalities.
- Open Access
- 1 December 2023
- Published by Central Manufacturing Technology Institute in Manufacturing Technology Today (MTT)
- Vol. 22 (11-12) , 1-19
Interoperable data retrieval solutions for smart manufacturing applications
Industry 4.0 / Digital Transformation technologies benefit industries by enhancing productivity, quality improvements, ease of maintenance and flexibility in manufacturing operations. One major challenge in digitalisation projects is acquiring data from industrial machinery and equipment due to proprietary industrial protocols. Integrating the “Industrial Internet of Things (IIoT)” has spurred digitalisation in manufacturing, enhancing productivity and reliability while lowering labour costs. IIoT links industrial machinery like PLCs, CNCs, and robots via a robust network, generating crucial data for automation. However, due to cost constraints, acquiring data from legacy machines, which use diverse communication protocols, poses a significant challenge, particularly for MSMEs. This paper explores leveraging open-source frameworks for real-time data acquisition from industrial machines in Industry 4.0. Through several test cases, the paper demonstrates the feasibility and benefits of using open-source solutions over vendor-specific licensed software. Additionally, it validates “Wireshark” as a versatile open-source tool for data acquisition across various vendor-specific machines, utilising standard communication protocols. This research offers a pioneering approach to digitalising MSME manufacturing industries while minimising costs efficiently.
- 1 December 2023
- Published by Central Manufacturing Technology Institute in Manufacturing Technology Today (MTT)
- Vol. 22 (11-12) , 1-19
Open AccessInteroperable data retrieval solutions for smart manufacturing applications
Industry 4.0 / Digital Transformation technologies benefit industries by enhancing productivity, quality improvements, ease of maintenance and flexibility in manufacturing operations. One major challenge in digitalisation projects is acquiring data from industrial machinery and equipment due to proprietary industrial protocols. Integrating the “Industrial Internet of Things (IIoT)” has spurred digitalisation in manufacturing, enhancing productivity and reliability while lowering labour costs. IIoT links industrial machinery like PLCs, CNCs, and robots via a robust network, generating crucial data for automation. However, due to cost constraints, acquiring data from legacy machines, which use diverse communication protocols, poses a significant challenge, particularly for MSMEs. This paper explores leveraging open-source frameworks for real-time data acquisition from industrial machines in Industry 4.0. Through several test cases, the paper demonstrates the feasibility and benefits of using open-source solutions over vendor-specific licensed software. Additionally, it validates “Wireshark” as a versatile open-source tool for data acquisition across various vendor-specific machines, utilising standard communication protocols. This research offers a pioneering approach to digitalising MSME manufacturing industries while minimising costs efficiently.
- Open Access
- 31 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (15) , 7711
Development of a Convolutional Neural Network Model to Predict Coronary Artery Disease Based on Single-Lead and Twelve-Lead ECG Signals
Coronary artery disease (CAD) is one of the most common causes of heart ailments; many patients with CAD do not exhibit initial symptoms. An electrocardiogram (ECG) is a diagnostic tool widely used to capture the abnormal activity of the heart and help with diagnoses. Assessing ECG signals may be challenging and time-consuming. Identifying abnormal ECG morphologies, especially in low amplitude curves, may be prone to error. Hence, a system that can automatically detect and assess the ECG and treadmill test ECG (TMT-ECG) signals will be helpful to the medical industry in detecting CAD. In the present work, we developed an intelligent system that can predict CAD, based on ECG and TMT signals more accurately than any other system developed thus far. The distinct convolutional neural network (CNN) architecture deals with single-lead and multi-lead (12-lead) ECG and TMT-ECG data effectively. While most artificial intelligence-based systems rely on the universal dataset, the current work used clinical lab data collected from a renowned hospital in the neighborhood. ECG and TMT-ECG graphs of normal and CAD patients were collected in the form of scanned reports. One-dimensional ECG data with all possible features were extracted from the scanned report with the help of a modified image processing method. This feature extraction procedure was integrated with the optimized architecture of the CNN model leading to a novel prediction system for CAD. The automated computer-assisted system helps in the detection and medication of CAD with a high prediction accuracy of 99%.
- 31 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (15) , 7711
Open AccessDevelopment of a Convolutional Neural Network Model to Predict Coronary Artery Disease Based on Single-Lead and Twelve-Lead ECG Signals
Coronary artery disease (CAD) is one of the most common causes of heart ailments; many patients with CAD do not exhibit initial symptoms. An electrocardiogram (ECG) is a diagnostic tool widely used to capture the abnormal activity of the heart and help with diagnoses. Assessing ECG signals may be challenging and time-consuming. Identifying abnormal ECG morphologies, especially in low amplitude curves, may be prone to error. Hence, a system that can automatically detect and assess the ECG and treadmill test ECG (TMT-ECG) signals will be helpful to the medical industry in detecting CAD. In the present work, we developed an intelligent system that can predict CAD, based on ECG and TMT signals more accurately than any other system developed thus far. The distinct convolutional neural network (CNN) architecture deals with single-lead and multi-lead (12-lead) ECG and TMT-ECG data effectively. While most artificial intelligence-based systems rely on the universal dataset, the current work used clinical lab data collected from a renowned hospital in the neighborhood. ECG and TMT-ECG graphs of normal and CAD patients were collected in the form of scanned reports. One-dimensional ECG data with all possible features were extracted from the scanned report with the help of a modified image processing method. This feature extraction procedure was integrated with the optimized architecture of the CNN model leading to a novel prediction system for CAD. The automated computer-assisted system helps in the detection and medication of CAD with a high prediction accuracy of 99%.
- 30 July 2019
- Published by Springer Nature in Metals and Materials International
- Vol. 26 (9) , 1394-1403
Evaluation of Microstructure, Hardness and Mechanical Properties of Friction Stir Welded Al–Ce–Si–Mg Aluminium Alloy
- 30 July 2019
- Published by Springer Nature in Metals and Materials International
- Vol. 26 (9) , 1394-1403
Evaluation of Microstructure, Hardness and Mechanical Properties of Friction Stir Welded Al–Ce–Si–Mg Aluminium Alloy
- 13 March 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (8) , 0865i7
Microstructure evolution and mechanical properties of friction stir welded AA6061/rutile composite
Present study explores the Friction stir welding (FSW) of rutile reinforced AA6061matrix composite using various combination of tool traverse speeds (60, 75 and 90 mm/min), rotational speeds (750, 1000 and 1250 rpm) and tool pin profiles (Threaded cylindrical and Square profiled pin). FSW process variables have significant impact in controlling the mechanical properties of the joint by limiting the welding defects. It has been inferred from the study that tool rotational speed and tool traverse speed majorly affects the microstructure, joint quality, hardness and joint strength. The weld area showed the presence of four distinct regions usually found in FSW of aluminium matrix composites. The weld region exhibited fine equiaxed grains and uniformly distributed tiny reinforced rutile particles. Tool having square profiled pin shows improved joint properties in comparison with tool having threaded cylindrical pin.
- 13 March 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (8) , 0865i7
Microstructure evolution and mechanical properties of friction stir welded AA6061/rutile composite
Present study explores the Friction stir welding (FSW) of rutile reinforced AA6061matrix composite using various combination of tool traverse speeds (60, 75 and 90 mm/min), rotational speeds (750, 1000 and 1250 rpm) and tool pin profiles (Threaded cylindrical and Square profiled pin). FSW process variables have significant impact in controlling the mechanical properties of the joint by limiting the welding defects. It has been inferred from the study that tool rotational speed and tool traverse speed majorly affects the microstructure, joint quality, hardness and joint strength. The weld area showed the presence of four distinct regions usually found in FSW of aluminium matrix composites. The weld region exhibited fine equiaxed grains and uniformly distributed tiny reinforced rutile particles. Tool having square profiled pin shows improved joint properties in comparison with tool having threaded cylindrical pin.
- 13 December 2018
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 72 (1) , 191-204
An Efficient Approach to Optimize Wear Behavior of Cryogenic Milling Process of SS316 Using Regression Analysis and Particle Swarm Techniques
- 13 December 2018
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 72 (1) , 191-204
An Efficient Approach to Optimize Wear Behavior of Cryogenic Milling Process of SS316 Using Regression Analysis and Particle Swarm Techniques
- 7 April 2012
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 48 (9) , 1549-1557
Boiling induced nanoparticle coating and its effect on pool boiling heat transfer on a vertical cylindrical surface using CuO nanofluids
- 7 April 2012
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 48 (9) , 1549-1557
Boiling induced nanoparticle coating and its effect on pool boiling heat transfer on a vertical cylindrical surface using CuO nanofluids
- 3 January 2012
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 48 (6) , 1031-1041
Experimental studies on CHF enhancement in pool boiling with CuO-water nanofluid
- 3 January 2012
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 48 (6) , 1031-1041
Experimental studies on CHF enhancement in pool boiling with CuO-water nanofluid