Tangdai Xia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tangdai Xia has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Shao-Heng He
Department of Civil Engineering, Hangzhou City University, Hangzhou, China
5 shared publications - Zhi Ding
Department of Civil Engineering, Hangzhou City University, Hangzhou, China
5 shared publications - Fan Xia
Research Center of Coastal and Urban Geotechnical Engineering, Zhejiang University, Hangzhou 310058, China
4 shared publications - Xingang Wang
Faculty of Water Resources and Architectural Engineering, Tarim University, Alar 843300, China
3 shared publications Bingqi Yu
Research Center of Coastal and Urban Geotechnical Engineering, Zhejiang University, Hangzhou 310058, China
2 shared publications- Bingqi Yu
College of Architectural Engineering, Zhejiang University, Hangzhou 310012, China
2 shared publications
Latest Publications
- Open Access
- 6 October 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (19) , 3615
Algebraic Theory of Inductive Mathematical Modeling: From Experimental Observations to State-Space Representations
In empirical sciences, the inductive construction of mathematical models relies on observations from controlled experiments, yet the conditions under which such constructions yield well-defined deterministic dynamics remain largely implicit. Within the framework of Axiomatic System Dynamics (ASD), this paper develops an algebraic theory of inductive mathematical modeling based on an ontological–epistemological dual structure. The modeling domain (MD) is formalized as a mathematical structure encoding initial conditions, loading protocols, and admissible loading ranges, thereby characterizing model applicability and the mechanisms of failure under improper extrapolation. Weak and strong validity conditions characterize, respectively, the uniqueness and dynamical closure of observable parameter evolution, yielding an algebraic constraint structure for mathematical models and their induced state-space representations. Generalized state parameters incorporate loading-history information, and an existence theorem is established. Difference representations of states and parameters provide an algebraic basis for expressing the underlying logic of comparative experiments, controlled-variable methods and causal inference. Together, these constructions formalize otherwise implicit concepts and structures in conventional modeling practice, render them amenable to algebraic reasoning, and provide a unified theoretical foundation for future extensions.
- 6 October 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (19) , 3615
Open AccessAlgebraic Theory of Inductive Mathematical Modeling: From Experimental Observations to State-Space Representations
In empirical sciences, the inductive construction of mathematical models relies on observations from controlled experiments, yet the conditions under which such constructions yield well-defined deterministic dynamics remain largely implicit. Within the framework of Axiomatic System Dynamics (ASD), this paper develops an algebraic theory of inductive mathematical modeling based on an ontological–epistemological dual structure. The modeling domain (MD) is formalized as a mathematical structure encoding initial conditions, loading protocols, and admissible loading ranges, thereby characterizing model applicability and the mechanisms of failure under improper extrapolation. Weak and strong validity conditions characterize, respectively, the uniqueness and dynamical closure of observable parameter evolution, yielding an algebraic constraint structure for mathematical models and their induced state-space representations. Generalized state parameters incorporate loading-history information, and an existence theorem is established. Difference representations of states and parameters provide an algebraic basis for expressing the underlying logic of comparative experiments, controlled-variable methods and causal inference. Together, these constructions formalize otherwise implicit concepts and structures in conventional modeling practice, render them amenable to algebraic reasoning, and provide a unified theoretical foundation for future extensions.
- 22 September 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (10) , 656
Asymmetric creep behavior and a mechanism of longitudinal crack development in cold-region subgrades under the sunny-shady slope effect
- 22 September 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (10) , 656
Asymmetric creep behavior and a mechanism of longitudinal crack development in cold-region subgrades under the sunny-shady slope effect
- Open Access
- 3 September 2026
- Published by MDPI AG in Preprints.org
Algebraic Theory of Inductive Mathematical Modeling: From Experimental Observations to State-Space Representations
In empirical sciences, the inductive construction of mathematical models relies on observations from controlled experiments, yet the conditions under which such constructions yield well-defined deterministic dynamics remain largely implicit. Within the framework of Axiomatic System Dynamics (ASD), this paper develops an algebraic theory of inductive mathematical modeling based on an ontological-epistemological dual structure. The modeling domain (MD) is formalized as a mathematical structure encoding initial conditions, loading protocols, and admissible loading ranges, thereby characterizing model applicability and the mechanisms of failure under improper extrapolation. Weak and strong validity conditions characterize, respectively, the uniqueness and dynamical closure of observable parameter evolution, yielding an algebraic constraint structure for mathematical models and their induced state-space representations. Generalized state parameters incorporate loading-history information, and an existence theorem is established. Difference representations of state and parameters provide an algebraic basis for comparative experiments, controlled-variable methods and causal inference. Together, these results establish a unified algebraic framework for inductive mathematical modeling and provide a principled basis for designing informative and computationally tractable experiments.
- 3 September 2026
- Published by MDPI AG in Preprints.org
Open AccessAlgebraic Theory of Inductive Mathematical Modeling: From Experimental Observations to State-Space Representations
In empirical sciences, the inductive construction of mathematical models relies on observations from controlled experiments, yet the conditions under which such constructions yield well-defined deterministic dynamics remain largely implicit. Within the framework of Axiomatic System Dynamics (ASD), this paper develops an algebraic theory of inductive mathematical modeling based on an ontological-epistemological dual structure. The modeling domain (MD) is formalized as a mathematical structure encoding initial conditions, loading protocols, and admissible loading ranges, thereby characterizing model applicability and the mechanisms of failure under improper extrapolation. Weak and strong validity conditions characterize, respectively, the uniqueness and dynamical closure of observable parameter evolution, yielding an algebraic constraint structure for mathematical models and their induced state-space representations. Generalized state parameters incorporate loading-history information, and an existence theorem is established. Difference representations of state and parameters provide an algebraic basis for comparative experiments, controlled-variable methods and causal inference. Together, these results establish a unified algebraic framework for inductive mathematical modeling and provide a principled basis for designing informative and computationally tractable experiments.
- Open Access
The Logic Structure Behind Mathematical Models: An Axiomatic Framework for System Dynamics
Modeling complex systems typically involves multiscale analysis, multiphysics coupling, and cross-domain integration. However, existing methodologies predominantly focus on constructing and solving specific equations, lacking a unified, explicit expression for underlying logical structures, which limits model comparison and combination. To address this issue, this paper proposes Axiomatic System Dynamics (ASD), a formal modeling language that decouples a model’s logical structure from its mathematical form by formalizing a mathematical model as a combination of a conceptual model and its mathematical realization. Grounded in primitive concepts—state, action, and parameter—ASD introduces generalized constitutive relationships to formulate a unified representation of system evolution. On this basis, a modular “conceptual model first, mathematical model second” paradigm is established to explicitly characterize causal relationships and identify logical isomorphisms across varied mathematical models. Through case studies spanning Newtonian mechanics, ideal gases, material constitutive relationships, and soil consolidation theories, we demonstrate that classical cross-domain theories can be formalized as specific implementations of their respective underlying system dynamics “mother structure.” Ultimately, ASD provides a meta-modeling framework independent of concrete mathematical forms, establishing a methodological foundation for logical expression, model comparison, and the meso-level deductive synthesis of cross-domain theories.
Open AccessThe Logic Structure Behind Mathematical Models: An Axiomatic Framework for System Dynamics
Modeling complex systems typically involves multiscale analysis, multiphysics coupling, and cross-domain integration. However, existing methodologies predominantly focus on constructing and solving specific equations, lacking a unified, explicit expression for underlying logical structures, which limits model comparison and combination. To address this issue, this paper proposes Axiomatic System Dynamics (ASD), a formal modeling language that decouples a model’s logical structure from its mathematical form by formalizing a mathematical model as a combination of a conceptual model and its mathematical realization. Grounded in primitive concepts—state, action, and parameter—ASD introduces generalized constitutive relationships to formulate a unified representation of system evolution. On this basis, a modular “conceptual model first, mathematical model second” paradigm is established to explicitly characterize causal relationships and identify logical isomorphisms across varied mathematical models. Through case studies spanning Newtonian mechanics, ideal gases, material constitutive relationships, and soil consolidation theories, we demonstrate that classical cross-domain theories can be formalized as specific implementations of their respective underlying system dynamics “mother structure.” Ultimately, ASD provides a meta-modeling framework independent of concrete mathematical forms, establishing a methodological foundation for logical expression, model comparison, and the meso-level deductive synthesis of cross-domain theories.
- Open Access
- 28 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3284
Cumulative Plastic Strain Characteristics of Soft Clay Under Traffic Load in Freeze–Thaw Cyclic Foundation
Seasonal permafrost areas undergo long-term freeze–thaw cycles, severely compromising the strength of foundation soils. Consequently, deformation and settlement under long-term cyclic traffic loads are greater than in normal temperature areas, leading to potential safety hazards. This study focuses on soft clay soils in seasonal permafrost areas. Remoulded soft clay is subjected to freeze–thaw cycles, followed by a series of long-term cyclic traffic load tests using the GDS dynamic triaxial testing system and pore size analyses using the nuclear magnetic resonance (NMR) technology. The study aims to investigate the effects of varying freeze–thaw cycles, compaction coefficients, and types of curing agents on the cumulative plastic strain of soft clay. The findings indicate that under identical freeze–thaw conditions, both the presence of curing agents and the increase of the soil’s compaction coefficient significantly restrain the deformation of freeze–thawed soils. In the micro perspective, freeze–thaw cycles cause irreversible fracturing of the soil’s internal framework, while the addition of curing agents effectively mitigates the pore enlargement effect. The resulting pore size distribution differs by about 4% from the original distribution, which is consistent with the patterns observed in dynamic triaxial tests.
- 28 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3284
Open AccessCumulative Plastic Strain Characteristics of Soft Clay Under Traffic Load in Freeze–Thaw Cyclic Foundation
Seasonal permafrost areas undergo long-term freeze–thaw cycles, severely compromising the strength of foundation soils. Consequently, deformation and settlement under long-term cyclic traffic loads are greater than in normal temperature areas, leading to potential safety hazards. This study focuses on soft clay soils in seasonal permafrost areas. Remoulded soft clay is subjected to freeze–thaw cycles, followed by a series of long-term cyclic traffic load tests using the GDS dynamic triaxial testing system and pore size analyses using the nuclear magnetic resonance (NMR) technology. The study aims to investigate the effects of varying freeze–thaw cycles, compaction coefficients, and types of curing agents on the cumulative plastic strain of soft clay. The findings indicate that under identical freeze–thaw conditions, both the presence of curing agents and the increase of the soil’s compaction coefficient significantly restrain the deformation of freeze–thawed soils. In the micro perspective, freeze–thaw cycles cause irreversible fracturing of the soil’s internal framework, while the addition of curing agents effectively mitigates the pore enlargement effect. The resulting pore size distribution differs by about 4% from the original distribution, which is consistent with the patterns observed in dynamic triaxial tests.
- Open Access
- 18 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 2163
Dynamic Response and Settlement Cause Analysis of Roadbed–Soft Clay Foundation System Under Traffic Vibration Loads
Roadbeds constructed on soft clay foundations often experience substantial post-construction settlement under long-term traffic loading. To investigate this phenomenon, numerical simulations were conducted to study the vibration response of various roadbed–foundation systems subjected to pavement vibration loads, and the propagation patterns of vibration waves within these systems were analyzed. Vibration reconsolidation tests were performed to examine the reconsolidation behavior of soft clays under vibration loads (cyclic loads without overall compressive or tensile tendencies) following initial consolidation under static loads. The influence of vibration load frequency and amplitude on the reconsolidation effect was briefly analyzed. By combining the analysis of the consolidation mechanism of soft clays under vibration loads, this study investigated the reasons for the large post-construction settlement of roadbed–soft clay foundation systems under traffic vibration loads from both wave propagation and vibration perspectives. Based on the focus on the equilibrium state reached by the soil under vibration loads, the vibration reconsolidation test represents a new research approach. In addition to deepening the understanding of the post-construction settlement phenomenon of foundations under traffic loads, it can also provide guidance for practical engineering applications such as foundation treatment and sludge solidification using vibration loads, generating potential economic benefits.
- 18 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 2163
Open AccessDynamic Response and Settlement Cause Analysis of Roadbed–Soft Clay Foundation System Under Traffic Vibration Loads
Roadbeds constructed on soft clay foundations often experience substantial post-construction settlement under long-term traffic loading. To investigate this phenomenon, numerical simulations were conducted to study the vibration response of various roadbed–foundation systems subjected to pavement vibration loads, and the propagation patterns of vibration waves within these systems were analyzed. Vibration reconsolidation tests were performed to examine the reconsolidation behavior of soft clays under vibration loads (cyclic loads without overall compressive or tensile tendencies) following initial consolidation under static loads. The influence of vibration load frequency and amplitude on the reconsolidation effect was briefly analyzed. By combining the analysis of the consolidation mechanism of soft clays under vibration loads, this study investigated the reasons for the large post-construction settlement of roadbed–soft clay foundation systems under traffic vibration loads from both wave propagation and vibration perspectives. Based on the focus on the equilibrium state reached by the soil under vibration loads, the vibration reconsolidation test represents a new research approach. In addition to deepening the understanding of the post-construction settlement phenomenon of foundations under traffic loads, it can also provide guidance for practical engineering applications such as foundation treatment and sludge solidification using vibration loads, generating potential economic benefits.
- Open Access
- 20 August 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (16) , 8331
An Experimental Study on the Microstructure Evolution of Soil under Lateral Consolidation Compression
Based on the lateral consolidation compression experiment of remolded soil simulating the effects of pile driving and soil squeezing, in this paper, the microstructures of soil with different degrees of lateral consolidation were investigated by a scanning electron microscope. Combined with Image-Pro Plus software to process data, parameters such as the equivalent diameter, porosity, circularity, directional frequency and fractal dimension of the soil microstructure were analyzed. The results demonstrate that the microstructure of the soil sample before consolidation was debris, aggregated particles and irregular flake aggregates. Following consolidation, the microstructure became a closed flake structure, where an obvious agglomeration phenomenon occurred. During the process of lateral consolidation compression, the large pore structure was more likely to be compressed and damaged, resulting in a decrease in the equivalent pore diameter and plane porosity, the approaching of circularity towards unity and an increase in the compaction and homogenization of soil with obvious directionality. Soil particles moved continuously under the action of consolidation compression to adjust the microstructure, and the fractal dimension gradually increased. Then, as consolidation compression continued, it gradually developed to a new equilibrium state, where the fractal dimension began to decrease and approach stability.
- 20 August 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (16) , 8331
Open AccessAn Experimental Study on the Microstructure Evolution of Soil under Lateral Consolidation Compression
Based on the lateral consolidation compression experiment of remolded soil simulating the effects of pile driving and soil squeezing, in this paper, the microstructures of soil with different degrees of lateral consolidation were investigated by a scanning electron microscope. Combined with Image-Pro Plus software to process data, parameters such as the equivalent diameter, porosity, circularity, directional frequency and fractal dimension of the soil microstructure were analyzed. The results demonstrate that the microstructure of the soil sample before consolidation was debris, aggregated particles and irregular flake aggregates. Following consolidation, the microstructure became a closed flake structure, where an obvious agglomeration phenomenon occurred. During the process of lateral consolidation compression, the large pore structure was more likely to be compressed and damaged, resulting in a decrease in the equivalent pore diameter and plane porosity, the approaching of circularity towards unity and an increase in the compaction and homogenization of soil with obvious directionality. Soil particles moved continuously under the action of consolidation compression to adjust the microstructure, and the fractal dimension gradually increased. Then, as consolidation compression continued, it gradually developed to a new equilibrium state, where the fractal dimension began to decrease and approach stability.
- Open Access
- 5 November 2021
- Published by Hindawi Limited in Geofluids
- Vol. 2021, 1-10
A Practical Design Method for Reducing Postconstruction Settlement of Highway Subgrade Induced by Soil Creep
The postconstruction settlement of the bridge approach is usually uneven, which could create a bump in the roadway. Indeed, this is a typical situation at the end of the bridge approach and requires a solution. One of the main causes of postconstruction settlement is the creep of soil. This paper is aimed at generalizing a new design method for controlling highway postconstruction settlement by replacing subgrade with expanded polystyrene (EPS). In the new method, the creep coefficient can be calculated based on the Yin-Graham EVP model. Thus, the relationship between the overloading ratio (OLR) and overconsolidation ratio (OCR) is obtained. The new method involves five steps: (a) determine the creep coefficient based on the relationship between the creep coefficient and over consolidation ratio, (b) divide the ground into a suitable number of sublayers, (c) select groups of different overloading ratios and then calculate the average values of the additional stress and overconsolidation ratio for each sublayer under different OLRs, (d) calculate the postconstruction settlement under different OLRs, and (e) determine the replacement capacity for different sections. This method can be used for quantitative design according to different requirements of postconstruction settlement of foundation. Taking Huzhou Avenue as an example, the case study illustrates the calculation process of the new method in detail.
- 5 November 2021
- Published by Hindawi Limited in Geofluids
- Vol. 2021, 1-10
Open AccessA Practical Design Method for Reducing Postconstruction Settlement of Highway Subgrade Induced by Soil Creep
The postconstruction settlement of the bridge approach is usually uneven, which could create a bump in the roadway. Indeed, this is a typical situation at the end of the bridge approach and requires a solution. One of the main causes of postconstruction settlement is the creep of soil. This paper is aimed at generalizing a new design method for controlling highway postconstruction settlement by replacing subgrade with expanded polystyrene (EPS). In the new method, the creep coefficient can be calculated based on the Yin-Graham EVP model. Thus, the relationship between the overloading ratio (OLR) and overconsolidation ratio (OCR) is obtained. The new method involves five steps: (a) determine the creep coefficient based on the relationship between the creep coefficient and over consolidation ratio, (b) divide the ground into a suitable number of sublayers, (c) select groups of different overloading ratios and then calculate the average values of the additional stress and overconsolidation ratio for each sublayer under different OLRs, (d) calculate the postconstruction settlement under different OLRs, and (e) determine the replacement capacity for different sections. This method can be used for quantitative design according to different requirements of postconstruction settlement of foundation. Taking Huzhou Avenue as an example, the case study illustrates the calculation process of the new method in detail.
- Open Access
- 2 April 2021
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 10 (4) , 221
Deformation Characteristics of Tianjiaba Landslide Induced by Surcharge
The Tianjiaba landslide on the Hang Rui expressway was located in the south of Sinan County, Tongren City, Guizhou Province. From the night of 2 July to the morning of 3 July 2011, numerous house cracks, foundation subsidence, and surface cracks suddenly occurred in the Tudiwan and Tianjiaba villages on the north and south sides of the management area. Based on the field geological survey, drilling, pit exploration, surface displacement, fracture observation, and deep displacement monitoring data analysis the deformation characteristics and causes of the Tianjiaba landslide were comprehensively analyzed. In this study, the landslide was divided into three areas, in which fracture group 3 was the most severe. Among the ten inclinometer holes, the sliding surface displacement of No.8 inclinometer hole was the largest, i.e., 25 mm. The sliding surface slopes of fracture groups 1, 2, and 3 were small, i.e., 12.25°, 4.97° and 6.62° to 4.64°, respectively. The results showed that the displacement values of different positions of the landslide were different, and the ground displacement value was larger than the sliding surface displacement value. The maximum displacement of the ground was 242.68 mm, which is larger than the maximum displacement of the inclinometer hole. Because the displacement of the upper part was greater than that of the lower part, bulging cracks formed in the lower part of the landslide. When the displacement of the upper part was less than that of the lower part, tension cracks formed in the lower part of the landslide. According to the surface cracks and displacement values of inclinometer holes on the sliding surface, the landslide was in the initial sliding stage and filling the platform of the management area on the hillside was the main cause of the landslide.
- 2 April 2021
- Published by MDPI AG in ISPRS International Journal of Geo-Information
- Vol. 10 (4) , 221
Open AccessDeformation Characteristics of Tianjiaba Landslide Induced by Surcharge
The Tianjiaba landslide on the Hang Rui expressway was located in the south of Sinan County, Tongren City, Guizhou Province. From the night of 2 July to the morning of 3 July 2011, numerous house cracks, foundation subsidence, and surface cracks suddenly occurred in the Tudiwan and Tianjiaba villages on the north and south sides of the management area. Based on the field geological survey, drilling, pit exploration, surface displacement, fracture observation, and deep displacement monitoring data analysis the deformation characteristics and causes of the Tianjiaba landslide were comprehensively analyzed. In this study, the landslide was divided into three areas, in which fracture group 3 was the most severe. Among the ten inclinometer holes, the sliding surface displacement of No.8 inclinometer hole was the largest, i.e., 25 mm. The sliding surface slopes of fracture groups 1, 2, and 3 were small, i.e., 12.25°, 4.97° and 6.62° to 4.64°, respectively. The results showed that the displacement values of different positions of the landslide were different, and the ground displacement value was larger than the sliding surface displacement value. The maximum displacement of the ground was 242.68 mm, which is larger than the maximum displacement of the inclinometer hole. Because the displacement of the upper part was greater than that of the lower part, bulging cracks formed in the lower part of the landslide. When the displacement of the upper part was less than that of the lower part, tension cracks formed in the lower part of the landslide. According to the surface cracks and displacement values of inclinometer holes on the sliding surface, the landslide was in the initial sliding stage and filling the platform of the management area on the hillside was the main cause of the landslide.
- Open Access
- 18 February 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (4) , 1810
Research on Microstructure of Soft Clay under Various Artificial Ground Freezing Conditions Based on NMR
Nuclear magnetic resonance (NMR) can help to collect soft clay pore size data. This paper uses NMR to study the effect of freezing duration, the gap time between two freezing actions and thawing temperature on the pore size distribution (PSD) in soft clay. It was found that most of the freezing and thawing progress was completed during the first two hours. A longer time gap between the first and second freezing cycles leads to greater structural damage. An appropriate thawing temperature results in less subsidence induced by the artificial ground freezing (AGF). A new method to distinguish water types for various freezing conditions is proposed. This freezing method to determine the cutoff value could fill the defect in the previous methods.
- 18 February 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (4) , 1810
Open AccessResearch on Microstructure of Soft Clay under Various Artificial Ground Freezing Conditions Based on NMR
Nuclear magnetic resonance (NMR) can help to collect soft clay pore size data. This paper uses NMR to study the effect of freezing duration, the gap time between two freezing actions and thawing temperature on the pore size distribution (PSD) in soft clay. It was found that most of the freezing and thawing progress was completed during the first two hours. A longer time gap between the first and second freezing cycles leads to greater structural damage. An appropriate thawing temperature results in less subsidence induced by the artificial ground freezing (AGF). A new method to distinguish water types for various freezing conditions is proposed. This freezing method to determine the cutoff value could fill the defect in the previous methods.