Chang-Ying Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chang-Ying Hu has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Zhi‐Wei Wang
College of Packaging Engineering, Jinan University, Zhuhai 519070, China
11 shared publications - Shao-Fu Zeng
College of Chemical Engineering
5 shared publications Zhi-Wei Wang
Key Laboratory of Product Packaging and Logistics, Jinan University, Zhuhai 519070, Guangdong, China; College of Packaging Engineering, Jinan University, Zhuhai 519070, Guangdong, China
5 shared publications- Wenwen Yu
Department of Food Science & Engineering, Jinan University, Huangpu West Avenue 601, Guangzhou City 510632, China
4 shared publications Yi-Qi Liu
School of Food & Pharmaceutical Engineering, Zhaoqing University, Zhaoqing, 526061, Guangdong, China; Department of Food Science & Engineering, Jinan University, Guangzhou City, 510632, Guangdong, China
4 shared publicationsYan Zeng
Department of Food Science and Engineering Jinan University Guangzhou China
3 shared publications
Latest Publications
- 10 June 2026
- Published by Wiley in Packaging Technology and Science
- Vol. 39 (12) , 1463-1477
From Post‐Consumer to Food‐Contact Materials: A Semi‐Chemical Upcycling Process of PET
The high‐value recycling of waste plastic is a key challenge in achieving a circular economy. This study introduces an innovative semi‐chemical process for producing recycled polyethylene terephthalate (rPET) materials by copolymerizing post‐consumer PET with monomers (ethylene glycol [EG] and terephthalic acid [TPA]) followed by esterification and polycondensation, thus opening a new avenue for the high‐value utilisation of rPET that is distinct from conventional physical and chemical recycling approaches. The microstructure and thermal properties of rPET during the semi‐chemical process were characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Fourier‐transform infrared spectroscopy with attenuated total reflection (ATR‐FTIR). To evaluate the safety of the final product as a food contact material, the variations in the types and concentrations of volatile, semivolatile and nonvolatile organic compounds in rPET during the semi‐chemical process were analysed via headspace gas chromatography–mass spectrometry (HS‐GC–MS), gas chromatography‐quadrupole tandem time‐of‐flight mass spectrometry (GC‐QTOF/MS) and ultra‐high performance liquid chromatography‐quadrupole time‐of‐flight mass spectrometry (UHPLC‐QTOF/MS). The results indicate that the esterification stage, characterised by the formation of numerous ‘cyclic polyester oligomers’ from oligomers, exhibited the lowest thermal stability. With the progression of subsequent processes (e.g., precondensation), molecular chains grow, resulting in a denser structure and a significant improvement in thermal stability. Ultimately, the rPET and its product obtained via solid‐state polycondensation (SSP) possessed a smooth and dense surface, with its thermal stability, melting behaviour and chemical structure being highly consistent with those of virgin PET (vPET). ATR‐FTIR analysis further confirmed that the process did not alter the fundamental chemical backbone of PET. Following treatment with esterification and polycondensation reactions, both the residual amounts and the number of species of volatile, semivolatile and nonvolatile substances were effectively controlled. The resulting food‐contact rPET material contained only three volatile substances (ethenylbenzene, nonanal, EG), one semivolatile substance (bis(2‐hydroxyethyl) terephthalate) and one nonvolatile substance (line (TPA‐EG) 2 ). This recycling process significantly enhances the safety of rPET, laying a theoretical foundation for its subsequent research and development in food‐contact related fields.
- 10 June 2026
- Published by Wiley in Packaging Technology and Science
- Vol. 39 (12) , 1463-1477
From Post‐Consumer to Food‐Contact Materials: A Semi‐Chemical Upcycling Process of PET
The high‐value recycling of waste plastic is a key challenge in achieving a circular economy. This study introduces an innovative semi‐chemical process for producing recycled polyethylene terephthalate (rPET) materials by copolymerizing post‐consumer PET with monomers (ethylene glycol [EG] and terephthalic acid [TPA]) followed by esterification and polycondensation, thus opening a new avenue for the high‐value utilisation of rPET that is distinct from conventional physical and chemical recycling approaches. The microstructure and thermal properties of rPET during the semi‐chemical process were characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Fourier‐transform infrared spectroscopy with attenuated total reflection (ATR‐FTIR). To evaluate the safety of the final product as a food contact material, the variations in the types and concentrations of volatile, semivolatile and nonvolatile organic compounds in rPET during the semi‐chemical process were analysed via headspace gas chromatography–mass spectrometry (HS‐GC–MS), gas chromatography‐quadrupole tandem time‐of‐flight mass spectrometry (GC‐QTOF/MS) and ultra‐high performance liquid chromatography‐quadrupole time‐of‐flight mass spectrometry (UHPLC‐QTOF/MS). The results indicate that the esterification stage, characterised by the formation of numerous ‘cyclic polyester oligomers’ from oligomers, exhibited the lowest thermal stability. With the progression of subsequent processes (e.g., precondensation), molecular chains grow, resulting in a denser structure and a significant improvement in thermal stability. Ultimately, the rPET and its product obtained via solid‐state polycondensation (SSP) possessed a smooth and dense surface, with its thermal stability, melting behaviour and chemical structure being highly consistent with those of virgin PET (vPET). ATR‐FTIR analysis further confirmed that the process did not alter the fundamental chemical backbone of PET. Following treatment with esterification and polycondensation reactions, both the residual amounts and the number of species of volatile, semivolatile and nonvolatile substances were effectively controlled. The resulting food‐contact rPET material contained only three volatile substances (ethenylbenzene, nonanal, EG), one semivolatile substance (bis(2‐hydroxyethyl) terephthalate) and one nonvolatile substance (line (TPA‐EG) 2 ). This recycling process significantly enhances the safety of rPET, laying a theoretical foundation for its subsequent research and development in food‐contact related fields.
- Open Access
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
Variations in Semi- and Non-Volatile Substances During Physical Recycling and Their Migration from rPET Bottles
As food contact materials, the safety of recycled polyethylene terephthalate (rPET) primarily depended on the pollutant removal capacity of the physical recycling process. By tracking variations in substances throughout the waste PET processing, it was confirmed that washing effectively removed surface residues, while heat treatment facilitated the degradation of oligomers. On this basis, the migration behaviors of semi-volatile and non-volatile substances in rPET/vPET blended bottles were evaluated. The results indicated that metal migration levels were low (< 160 μg/kg) and within safe limits. Regarding semi-volatile and non-volatile substances, although almost no migration occurred in 4% acetic acid or 10% ethanol, significant migration was observed in 95% ethanol, with the migration amount of non-volatile substances (primarily linear and cyclic oligomers) reaching 2.6 mg/kg. Notably, under high-alcohol and high-temperature conditions, virgin PET (vPET) exhibited oligomer release levels comparable to those of rPET. Furthermore, migration levels showed no significant correlation with the rPET incorporation ratio. Safety assessments further identified cyclic oligomers as the primary risk factors. Comparative analysis revealed that Enterprise 1 demonstrated superior safety over Enterprise 2, primarily attributed to the lower content of the key risk substance, cyclic (TPA-EG)₃, a difference likely stemming from variations in physical recycling process parameters and rPET raw material sources. Additionally, high temperatures and prolonged storage times accelerated the migration of cyclic oligomers. In summary, optimizing physical recycling process parameters and strictly controlling rPET sources effectively controlled chemical risks, providing a scientific basis for food packaging applications with high safety standards.
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessVariations in Semi- and Non-Volatile Substances During Physical Recycling and Their Migration from rPET Bottles
As food contact materials, the safety of recycled polyethylene terephthalate (rPET) primarily depended on the pollutant removal capacity of the physical recycling process. By tracking variations in substances throughout the waste PET processing, it was confirmed that washing effectively removed surface residues, while heat treatment facilitated the degradation of oligomers. On this basis, the migration behaviors of semi-volatile and non-volatile substances in rPET/vPET blended bottles were evaluated. The results indicated that metal migration levels were low (< 160 μg/kg) and within safe limits. Regarding semi-volatile and non-volatile substances, although almost no migration occurred in 4% acetic acid or 10% ethanol, significant migration was observed in 95% ethanol, with the migration amount of non-volatile substances (primarily linear and cyclic oligomers) reaching 2.6 mg/kg. Notably, under high-alcohol and high-temperature conditions, virgin PET (vPET) exhibited oligomer release levels comparable to those of rPET. Furthermore, migration levels showed no significant correlation with the rPET incorporation ratio. Safety assessments further identified cyclic oligomers as the primary risk factors. Comparative analysis revealed that Enterprise 1 demonstrated superior safety over Enterprise 2, primarily attributed to the lower content of the key risk substance, cyclic (TPA-EG)₃, a difference likely stemming from variations in physical recycling process parameters and rPET raw material sources. Additionally, high temperatures and prolonged storage times accelerated the migration of cyclic oligomers. In summary, optimizing physical recycling process parameters and strictly controlling rPET sources effectively controlled chemical risks, providing a scientific basis for food packaging applications with high safety standards.
- 23 August 2025
- Published by Elsevier in Food Chemistry
- Vol. 493 (Pt 4) , 146103
Preparation and safety assessment of BADGE- histidine adduct from epoxy-coated cans
- 23 August 2025
- Published by Elsevier in Food Chemistry
- Vol. 493 (Pt 4) , 146103
Preparation and safety assessment of BADGE- histidine adduct from epoxy-coated cans
- Open Access
Migration Safety of Perfluoroalkyl Substances from Sugarcane Pulp Tableware: Residue Analysis and Takeout Simulation Study
The rapid growth of plant-based biodegradable tableware, driven by plastic restrictions, necessitates rigorous safety assessments of potential chemical contaminants like per- and polyfluoroalkyl substances (PFASs). This study comprehensively evaluated PFAS contamination risks in commercial sugarcane pulp tableware, focusing on the residues of five target PFASs (PFOA, PFOS, PFNA, PFHxA, PFPeA) and their migration behavior under simulated use and takeout conditions. An analysis of 22 samples revealed elevated levels of total fluorine (TF: 33.7–163.6 mg/kg) exceeding the EU limit (50 mg/kg) in 31% of products. While sporadic PFOA residues surpassed the EU single compound limit (0.025 mg/kg) in 9% of samples (16.1–25.5 μg/kg), the levels of extractable organic fluorine (EOF: 4.9–17.4 mg/kg) and the low EOF/TF ratio (3.19–10.4%) indicated inorganic fluorides as the primary TF source. Critically, the migration of all target PFASs into food simulants (water, 4% acetic acid, 50% ethanol, 95% ethanol) under standardized use conditions was minimal (PFOA: 0.52–0.70 μg/kg; PFPeA: 0.54–0.63 μg/kg; others < LOQ). Even under aggressive simulated takeout scenarios (50 °C oscillation for 12 h + 12 h storage at 25 °C), PFOA migration reached only 0.99 ± 0.01 μg/kg in 95% ethanol. All migrated levels were substantially (>15-fold) below typical safety thresholds (e.g., 0.01 mg/kg). These findings demonstrate that, despite concerning residue levels in some products pointing to manufacturing contamination sources, migration during typical and even extended use scenarios poses negligible immediate consumer risk. This study underscores the need for stricter quality control targeting PFOA and inorganic fluoride inputs in sugarcane pulp tableware production.
Open AccessMigration Safety of Perfluoroalkyl Substances from Sugarcane Pulp Tableware: Residue Analysis and Takeout Simulation Study
The rapid growth of plant-based biodegradable tableware, driven by plastic restrictions, necessitates rigorous safety assessments of potential chemical contaminants like per- and polyfluoroalkyl substances (PFASs). This study comprehensively evaluated PFAS contamination risks in commercial sugarcane pulp tableware, focusing on the residues of five target PFASs (PFOA, PFOS, PFNA, PFHxA, PFPeA) and their migration behavior under simulated use and takeout conditions. An analysis of 22 samples revealed elevated levels of total fluorine (TF: 33.7–163.6 mg/kg) exceeding the EU limit (50 mg/kg) in 31% of products. While sporadic PFOA residues surpassed the EU single compound limit (0.025 mg/kg) in 9% of samples (16.1–25.5 μg/kg), the levels of extractable organic fluorine (EOF: 4.9–17.4 mg/kg) and the low EOF/TF ratio (3.19–10.4%) indicated inorganic fluorides as the primary TF source. Critically, the migration of all target PFASs into food simulants (water, 4% acetic acid, 50% ethanol, 95% ethanol) under standardized use conditions was minimal (PFOA: 0.52–0.70 μg/kg; PFPeA: 0.54–0.63 μg/kg; others < LOQ). Even under aggressive simulated takeout scenarios (50 °C oscillation for 12 h + 12 h storage at 25 °C), PFOA migration reached only 0.99 ± 0.01 μg/kg in 95% ethanol. All migrated levels were substantially (>15-fold) below typical safety thresholds (e.g., 0.01 mg/kg). These findings demonstrate that, despite concerning residue levels in some products pointing to manufacturing contamination sources, migration during typical and even extended use scenarios poses negligible immediate consumer risk. This study underscores the need for stricter quality control targeting PFOA and inorganic fluoride inputs in sugarcane pulp tableware production.
- 14 February 2025
- Published by Elsevier in Food Chemistry
- Vol. 476, 143347
Binding mechanism and safety assessment of BADGE from epoxy-coated cans and protein
- 14 February 2025
- Published by Elsevier in Food Chemistry
- Vol. 476, 143347
Binding mechanism and safety assessment of BADGE from epoxy-coated cans and protein
- 2 July 2024
- Published by Elsevier in Food Packaging and Shelf Life
- Vol. 44
Effect of recycled polypropylene on migration of six processing aids in polypropylene film to milk
- 2 July 2024
- Published by Elsevier in Food Packaging and Shelf Life
- Vol. 44
Effect of recycled polypropylene on migration of six processing aids in polypropylene film to milk
- 27 December 2023
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 259 (Pt 1) , 129066
Adopting the “Missile boats-Aircraft carrier” strategy via human-contact friendly oxidized starch to achieve rapid-sustainably antibacterial paperboards
- 27 December 2023
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 259 (Pt 1) , 129066
Adopting the “Missile boats-Aircraft carrier” strategy via human-contact friendly oxidized starch to achieve rapid-sustainably antibacterial paperboards