Shao-Fu Zeng
Research Subjects
Shao-Fu Zeng has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Chang-Ying Hu
Department of Food Science and Engineering Jinan University Guangzhou China
5 shared publications - Zhi‐Wei Wang
College of Packaging Engineering, Jinan University, Zhuhai 519070, China
4 shared publications Pan Guo
2 shared publicationsYan Zeng
2 shared publicationsChang-Ying Hu
Packaging Engineering Institute, Jinan University, Qianshan Road 206, Zhuhai 519070, Guangdong, China
1 shared publicationGui-Hua Liu
1 shared publication
Latest Publications
- Open Access
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
Variations in Semi- and Non-Volatile Substances During Physical Recycling and Their Migration from rPET Bottles
As food contact materials, the safety of recycled polyethylene terephthalate (rPET) primarily depended on the pollutant removal capacity of the physical recycling process. By tracking variations in substances throughout the waste PET processing, it was confirmed that washing effectively removed surface residues, while heat treatment facilitated the degradation of oligomers. On this basis, the migration behaviors of semi-volatile and non-volatile substances in rPET/vPET blended bottles were evaluated. The results indicated that metal migration levels were low (< 160 μg/kg) and within safe limits. Regarding semi-volatile and non-volatile substances, although almost no migration occurred in 4% acetic acid or 10% ethanol, significant migration was observed in 95% ethanol, with the migration amount of non-volatile substances (primarily linear and cyclic oligomers) reaching 2.6 mg/kg. Notably, under high-alcohol and high-temperature conditions, virgin PET (vPET) exhibited oligomer release levels comparable to those of rPET. Furthermore, migration levels showed no significant correlation with the rPET incorporation ratio. Safety assessments further identified cyclic oligomers as the primary risk factors. Comparative analysis revealed that Enterprise 1 demonstrated superior safety over Enterprise 2, primarily attributed to the lower content of the key risk substance, cyclic (TPA-EG)₃, a difference likely stemming from variations in physical recycling process parameters and rPET raw material sources. Additionally, high temperatures and prolonged storage times accelerated the migration of cyclic oligomers. In summary, optimizing physical recycling process parameters and strictly controlling rPET sources effectively controlled chemical risks, providing a scientific basis for food packaging applications with high safety standards.
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessVariations in Semi- and Non-Volatile Substances During Physical Recycling and Their Migration from rPET Bottles
As food contact materials, the safety of recycled polyethylene terephthalate (rPET) primarily depended on the pollutant removal capacity of the physical recycling process. By tracking variations in substances throughout the waste PET processing, it was confirmed that washing effectively removed surface residues, while heat treatment facilitated the degradation of oligomers. On this basis, the migration behaviors of semi-volatile and non-volatile substances in rPET/vPET blended bottles were evaluated. The results indicated that metal migration levels were low (< 160 μg/kg) and within safe limits. Regarding semi-volatile and non-volatile substances, although almost no migration occurred in 4% acetic acid or 10% ethanol, significant migration was observed in 95% ethanol, with the migration amount of non-volatile substances (primarily linear and cyclic oligomers) reaching 2.6 mg/kg. Notably, under high-alcohol and high-temperature conditions, virgin PET (vPET) exhibited oligomer release levels comparable to those of rPET. Furthermore, migration levels showed no significant correlation with the rPET incorporation ratio. Safety assessments further identified cyclic oligomers as the primary risk factors. Comparative analysis revealed that Enterprise 1 demonstrated superior safety over Enterprise 2, primarily attributed to the lower content of the key risk substance, cyclic (TPA-EG)₃, a difference likely stemming from variations in physical recycling process parameters and rPET raw material sources. Additionally, high temperatures and prolonged storage times accelerated the migration of cyclic oligomers. In summary, optimizing physical recycling process parameters and strictly controlling rPET sources effectively controlled chemical risks, providing a scientific basis for food packaging applications with high safety standards.
- 11 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (46) , 31179-31194
Effect of crystalline structure on the diffusion of volatile organic compounds (VOCs) in recycled polyethylene: Insights from molecular dynamics simulations
The migration of volatile organic compounds (VOCs) from recycled polyethylene (rPE) matrices poses significant safety concerns for food packaging applications primarily due to potential consumer exposure risks. In this work, united-atom (UA) models with VOCs (1-octene, myrcene, linalool, octanal, and tetradecane) of rPE by treating multiple atoms as a single bead were developed. We performed UA molecular dynamics (MD) simulations to reveal the mechanism of VOCs diffusion within rPE under the influence of temperature, crystallinity, and the deformation of fluid-induced crystallization (FIC). The results show that the diffusion capability of VOCs is stronger in the amorphous regions of rPE, and weaker in the crystalline regions. The crystallinity of the rPE model exhibited a negative correlation with the mean squared displacement (MSD) of VOCs, attributable to the reduction of amorphous regions and free volume at higher segment orientation. With increasing temperatures, a significant enhancement in the diffusion of VOCs was observed, exemplified by the diffusion coefficient of 1-octene, which rose from 1.69 ± 0.60 × 10-6 to 6.49 ± 0.94 × 10-6 cm2·s-1 at 293-353 K. Concurrently, the elevated temperatures intensify the free volume expansion in rPE. The significantly increased orientation of rPE induced by fluid flow correlates well with the restricted diffusion behavior of VOCs, further confirming the decisive role of the crystallinity of rPE in the retention and removal of VOCs. Finally, the degree of VOCs diffusion trajectories in rPE space can be indirectly predicted from their MSD values and potential energy values obtained through molecular simulations.
- 11 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (46) , 31179-31194
Effect of crystalline structure on the diffusion of volatile organic compounds (VOCs) in recycled polyethylene: Insights from molecular dynamics simulations
The migration of volatile organic compounds (VOCs) from recycled polyethylene (rPE) matrices poses significant safety concerns for food packaging applications primarily due to potential consumer exposure risks. In this work, united-atom (UA) models with VOCs (1-octene, myrcene, linalool, octanal, and tetradecane) of rPE by treating multiple atoms as a single bead were developed. We performed UA molecular dynamics (MD) simulations to reveal the mechanism of VOCs diffusion within rPE under the influence of temperature, crystallinity, and the deformation of fluid-induced crystallization (FIC). The results show that the diffusion capability of VOCs is stronger in the amorphous regions of rPE, and weaker in the crystalline regions. The crystallinity of the rPE model exhibited a negative correlation with the mean squared displacement (MSD) of VOCs, attributable to the reduction of amorphous regions and free volume at higher segment orientation. With increasing temperatures, a significant enhancement in the diffusion of VOCs was observed, exemplified by the diffusion coefficient of 1-octene, which rose from 1.69 ± 0.60 × 10-6 to 6.49 ± 0.94 × 10-6 cm2·s-1 at 293-353 K. Concurrently, the elevated temperatures intensify the free volume expansion in rPE. The significantly increased orientation of rPE induced by fluid flow correlates well with the restricted diffusion behavior of VOCs, further confirming the decisive role of the crystallinity of rPE in the retention and removal of VOCs. Finally, the degree of VOCs diffusion trajectories in rPE space can be indirectly predicted from their MSD values and potential energy values obtained through molecular simulations.
- 22 December 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (11)
Effect of mechanical recycling on crystallization, mechanical, and rheological properties of recycled high‐density polyethylene and reinforcement based on virgin high‐density polyethylene
This study investigated the effects of mechanical recycling on the crystallization, mechanical, thermal, and rheological properties of recycled high‐density polyethylene (rHDPE), as well as vHDPE/rHDPE pellets and films made by different compositions. The results confirmed the presence of contaminants in rHDPEs, and the crystalline diameter of rHDPE is smaller than that of virgin high‐density polyethylene (vHDPE), with diameters ranging from 0.60 to 0.72 μm. The content of 75 wt% vHDPE in rHDPE film could repair the defects of crystalline morphology to approximate that of vHDPE films and significantly improve the elongation at break. The temperature required for the transition from crystalline to amorphous state of rHDPE film was 2°C lower than that of vHDPE, and the crystallization time and crystallinity declined compared to that of vHDPE. For rheological performance, the apparent shear viscosity and melt fluidity of rHDPE were worse than those of vHDPE. The blending of low rHDPE with vHDPE is a feasible option not only to reduce plastic waste but also to maintain acceptable properties of the blend composition.
- 22 December 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (11)
Effect of mechanical recycling on crystallization, mechanical, and rheological properties of recycled high‐density polyethylene and reinforcement based on virgin high‐density polyethylene
This study investigated the effects of mechanical recycling on the crystallization, mechanical, thermal, and rheological properties of recycled high‐density polyethylene (rHDPE), as well as vHDPE/rHDPE pellets and films made by different compositions. The results confirmed the presence of contaminants in rHDPEs, and the crystalline diameter of rHDPE is smaller than that of virgin high‐density polyethylene (vHDPE), with diameters ranging from 0.60 to 0.72 μm. The content of 75 wt% vHDPE in rHDPE film could repair the defects of crystalline morphology to approximate that of vHDPE films and significantly improve the elongation at break. The temperature required for the transition from crystalline to amorphous state of rHDPE film was 2°C lower than that of vHDPE, and the crystallization time and crystallinity declined compared to that of vHDPE. For rheological performance, the apparent shear viscosity and melt fluidity of rHDPE were worse than those of vHDPE. The blending of low rHDPE with vHDPE is a feasible option not only to reduce plastic waste but also to maintain acceptable properties of the blend composition.
- 26 November 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (6)
Effects of mechanical recycling on optical properties and microstructure of recycled high‐density polyethylene pellets and bottles
The demand for recycling high‐density polyethylene (HDPE) utilizing mechanical recycling technologies is currently felt strongly by both society and industry. However, thermal oxidation of the polymer during the recycling process may lead to irreversible changes in the material properties of recycled high‐density polyethylene (rHDPE). The effects of mechanical recycling on the optical characteristics and microstructure of rHDPE pellets and bottles were investigated in this study. The results revealed that the apparent color of the rHDPE became more yellow and gray compared to the virgin HDPE (vHDPE), and showed a signal at 670–680 nm in the solar reflectance spectrum. The thermal oxidation of rHDPE considerably raised the absorption intensities of carbonyl, ester, and hydroxyl groups in attenuated total reflection Fourier transform infrared spectrum. In addition, the presence of carbonyl and hydroxyl unsaturated chemicals might make it challenging to recognize the distinctive peaks of vHDPE in the ultraviolet–visible diffuse reflectance (UV–Vis‐DIR) spectra at wavelengths less than 400 nm. Thermal oxidation of rHDPE was also confirmed in the COH, CO, and OCO valence structures of C1s and O1s. A characteristic valence band (VB) profile at 25 eV can be used as the recognizable information for the oxidation of rHDPE. The microstructure of the surface of rHDPE pellets exhibited rough and uneven morphological defects. The higher recycled content made rHDPE bottles' surface morphology rougher and their cross‐section microstructure thinner and more porous than vHDPE bottles.
- 26 November 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (6)
Effects of mechanical recycling on optical properties and microstructure of recycled high‐density polyethylene pellets and bottles
The demand for recycling high‐density polyethylene (HDPE) utilizing mechanical recycling technologies is currently felt strongly by both society and industry. However, thermal oxidation of the polymer during the recycling process may lead to irreversible changes in the material properties of recycled high‐density polyethylene (rHDPE). The effects of mechanical recycling on the optical characteristics and microstructure of rHDPE pellets and bottles were investigated in this study. The results revealed that the apparent color of the rHDPE became more yellow and gray compared to the virgin HDPE (vHDPE), and showed a signal at 670–680 nm in the solar reflectance spectrum. The thermal oxidation of rHDPE considerably raised the absorption intensities of carbonyl, ester, and hydroxyl groups in attenuated total reflection Fourier transform infrared spectrum. In addition, the presence of carbonyl and hydroxyl unsaturated chemicals might make it challenging to recognize the distinctive peaks of vHDPE in the ultraviolet–visible diffuse reflectance (UV–Vis‐DIR) spectra at wavelengths less than 400 nm. Thermal oxidation of rHDPE was also confirmed in the COH, CO, and OCO valence structures of C1s and O1s. A characteristic valence band (VB) profile at 25 eV can be used as the recognizable information for the oxidation of rHDPE. The microstructure of the surface of rHDPE pellets exhibited rough and uneven morphological defects. The higher recycled content made rHDPE bottles' surface morphology rougher and their cross‐section microstructure thinner and more porous than vHDPE bottles.