Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiangyu Fan has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Polarity Aware Temporal Masked Framework for Well Log Reconstruction from Incomplete Logs

    by Jia Xu, Xiangyu Fan, Fan Meng, Chunlan Zhao, Pengfei Zhao, Enayet Ullah Mira, Alhamzah H. Jasim, Qiangui Zhang

    Missing logs are common in practical well logging because of tool failure, poor borehole conditions, and incomplete logging programs. Reliable reconstruction of missing logs from available measurements is therefore important for reservoir evaluation and field development. In this study, we propose POLAEncoder, a temporal masked reconstruction framework for acoustic (AC) log reconstruction from incomplete well logs. The framework is built around a structured masking strategy and a polarity-aware linear attention encoder. The masking strategy is used to simulate realistic missing conditions, while the polarity aware design is used to capture both same-signed and opposite-signed dependencies among logs during reconstruction. In addition, BPE tokenization on geological text is introduced as auxiliary contextual information to support feature representation. Experiments were conducted on logging data from 70 wells in the Shengli Oilfield, China. POLAEncoder achieved the strongest overall test-set performance among the compared recurrent and attention-based models. On Well A, a representative test well containing interpreted reservoir intervals, POLAEncoder achieved an MAE of 22.80, an R² of 0.851, and a PCC of 0.927. The reconstructed AC log also preserved reservoir-boundary transitions and local response variations more faithfully than the baseline models. Ablation results show that the polarity aware attention module contributes the most, while the BPE textual tokenization also improves reconstruction performance. Additional full log masking experiments further show that the model remains reasonably robust as the number of fully masked logs increases. Overall, POLAEncoder provides an effective and practical approach for AC log reconstruction under realistic incomplete well log conditions.

  • Open Access

    A novel method for evaluating rock strength based on microfracture mechanics using rock debris

    by Cheng Meng, Xiangyu Fan, Qiangui Zhang, Hongxi Li, Tianshou Ma, Lefan Zhang, Zhuzheng Li, Lichun Jia, Pengfei Zhao

    The rock strength is a critical parameter for the stability evaluation of geotechnical engineering structures. In the present work, a novel method is proposed to evaluate rock strength based on micro-fracture mechanics theory by introducing an optimized correction term for uniaxial compressive strength and microscopic fracture toughness characteristic parameter derived from nanoindentation experiments. This approach enables the estimation of rock strength using small or irregular rock debris, which are difficult to test the rock strength using conventional methods. The method relies on the load–displacement curve of nanoindentation experiments, and eight independent parameters: percentage of each mineral component content (fi), friction coefficient (μ), intrinsic material constant (k), crack length (c), fracture toughness (KIC), the microcrack density b, the microcrack width w and the parameter Q related to the micro-macro scale transition. The physical meaning of each parameter, along with its experimental determination, are systematically described. The method performance validation is conducted using triaxial compression test data on shale and dolomite. The results demonstrate a strong correlation between predicted and experimental values: for shale, the regression R-square (R²) is 0.9636, the average absolute relative error percentage (AAREP) is 6.63%, and the root mean square error (RMSE) is 16.88; for dolomite, R² is 0.9753, AAREP is 4.77%, and RMSE is 15.57. This method effectively addresses the limitations of standard specimen size and geometry in traditional compression tests, offering a low-cost, efficient, and practical alternative for predicting rock strength in both laboratory and field applications.

  • Open Access

    Drilling Sound Analysis and Its Application in Lithology Identification

    by Aichuan Bai, Xiangyu Fan, Muming Xia, Xiao Zou, Changchun Zou, Panpan Fan

    Real-time lithology identification while drilling is widely applied in oil and gas exploration, development drilling, geo-steering, unconventional resource extraction, well logging, and environmental monitoring, enhancing efficiency and accuracy in subsurface operations. This study investigates the frequency characteristics of rock-drilling sounds generated during drilling operations and explores their potential for real-time lithology identification. Experiments were conducted using 8 mm and 14 mm drill bits at both high and low rotational speeds on four types of rock samples: sandstone, limestone, granite, and shaly sandstone. Sound signals were recorded both within the rock and in air using high-fidelity sensors. The results reveal distinct frequency patterns for each rock type, with sandstone exhibiting dominant low-frequency energy, limestone and granite showing broader frequency bands with strong high-frequency components, and shaly sandstone displaying a mix of low- and high-frequency energy. Quadratic polynomial regression models between the Vp or Vs and the peak frequencies of the four distinct rock samples are built, and the corresponding coefficients of determination are 0.9878 and 0.9799. The study also demonstrates that drilling parameters, such as drill bit diameter and revolutions per minute (RPM), significantly influence the frequency distribution of rock-drilling sounds, with larger drill bits and higher RPMs producing broader frequency bands and stronger high-frequency energy. Comparisons between in-rock and in-air recordings show that the latter captures richer high-frequency information, though the overall trends remain consistent. These findings provide an experimental foundation for using rock-breaking sounds as a potential tool for lithology identification during drilling operations. The study highlights the importance of considering rock heterogeneity and drilling conditions when interpreting acoustic data and suggests future work to validate the method in field conditions and integrate advanced data processing techniques.


  • Open Access

    Hydrochemical Characteristics of High‐Temperature Geothermal Fluids and Quantitative Assessment of Wellbore Scaling in the Yangbajain Geothermal Field, Tibet

    by Jin Li, Xiangyu Fan, Yufei Chen, Hongge Xiong, Xiantao Yu, Ming Xu, Yifeng Zhou

    Severe calcium carbonate scaling occurs in the wellbores of high‐temperature geothermal wells in the Yangbajain Geothermal Field. Based on sampling and laboratory analysis of the geothermal field, this study investigates the hydrogeochemical characteristics of the geothermal fluids, estimates the reservoir temperature, and reconstructs the bottom‐hole fluid composition. Combined with field discharge tests and scaling characteristics, a prediction model for the flash horizon in the wellbore and a coupled quantitative evaluation model for calcium carbonate scaling are established to forecast the scaling location and amount. The results indicate that the shallow reservoir temperature is 190 ° C ± 20 ° C, with an initial pH between 5.3 and 6.7. The high‐temperature geothermal water is of Na‐Cl type, and the CO 2 in the geothermal fluid primarily originates from high‐temperature decarbonation of deep metamorphic sedimentary rocks and marine carbonates. Higher CO 2 content leads to a greater scaling rate and amount. For the typical geothermal well ZK303, the predicted flash horizon is at a depth of 126.8 m, with the most severe scaling occurring 10–20 m above the flash horizon. The maximum scaling rate is 0.1214 mm/d, with scaling thicknesses of 0.85 mm (7 days) and 3.64 mm (30 days), and scaling amounts of 342.65 kg (7 days) and 1468.52 kg (30 days).


  • Open Access

    A Modified Nonlinear Mohr–Coulomb Failure Criterion for Rocks Under High-Temperature and High-Pressure Conditions

    by Zhuzheng Li, Hongxi Li, Qiangui Zhang, Jiahui Wang, Cheng Meng, Xiangyu Fan, Pengfei Zhao

    In deep, geologically complex environments characterized by high in situ stress and elevated formation temperatures, the mechanical behavior of rocks often transitions from brittle to ductile, differing significantly from that of shallow formations. Traditional rock failure criteria frequently fail to accurately assess the strength of rocks under such deep conditions. To address this, a novel failure criterion suitable for high-temperature and high-pressure conditions has been developed by modifying the Mohr–Coulomb criterion. This criterion incorporates a quadratic function of confining pressure to account for the attenuation rate of strength increase under high confining pressure and a linear function of temperature to reflect the linear degradation of strength at elevated temperatures. This criterion has been used to predict the strength of granite, shale, and carbonate rocks, yielding results that align well with the experimental data. The average coefficient of determination (R2) reached 97.1%, and the mean relative error (MRE) was 5.25%. Compared with the Hoek–Brown and Bieniawski criteria, the criterion proposed in this study more accurately captures the strength characteristics of rocks under high-temperature and high-pressure conditions, with a prediction accuracy improvement of 1.70–4.09%, showing the best performance in the case of carbonate rock. A sensitivity analysis of the criterion parameters n and B revealed notable differences in how various rock types respond to these parameters. Among the three rock types studied, granite exhibited the lowest sensitivity to both parameters, indicating the highest stability in the prediction results. Additionally, the predictive outcomes were generally more sensitive to changes in parameter B than in n. These findings contribute to a deeper understanding of rock mechanical behavior under extreme conditions and offer valuable theoretical support for drilling, completion, and stimulation operations in deep hydrocarbon reservoirs.


  • Open Access

    Numerical Simulation on the Influence of the Distribution Characteristics of Cracks and Solution Cavities on the Wellbore Stability in Carbonate Formation

    by Jingzhe Zhang, Rongrong Zhao, Hongyi An, Wenhao Li, Yuxin Geng, Xiangyu Fan, Qiangui Zhang

    The development of cracks and solution cavities in carbonate reservoirs can notably reduce the rock’s mechanical properties, leading to a severe wellbore collapse problem during drilling operations. To clarify the influence of the characteristics of cracks and solution cavities on the wellbore stability in the Dengying Formation carbonate reservoir in the Gaoshiti–Moxi area of Sichuan, the mechanical properties of carbonate rock were analyzed. Then, the influences of the attitude and width of cracks, the size and quantity of solution cavities, and their connectivity on wellbore stability were studied using FLAC3D 6.00 numerical simulation software. Our results show the following: (1) The cracks and solution cavities in the Dengying Formation carbonate rock cause significant differences in the rock’s mechanical properties. (2) The equivalent drilling fluid density of collapse pressure (ρc) considering the effects of cracks and solution cavities is 6.4% higher than without these effects, which is in good accordance with engineering practice. Additionally, cracks play a more significant role than solution cavities in affecting the wellbore stability. (3) When the orientation of a crack is closer to the direction of maximum horizontal stress, and the dip angle and width of the crack increase, the stress and deformation at the intersection of the crack and wellbore gradually increase, and correspondingly, ρc also increases. (4) The stress and displacement of various points around the solution cavities gradually increase with the increases in diameter and quantity of solution cavities, and ρc also increases. (5) Compared with the situation where cracks and solution cavities are not interconnected, the stress disturbance area around the wellbore is larger, and ρc is greater when cracks and solution cavities are interconnected.

  • Evaluation of hydration of Permian basalt and tuff in Sichuan Basin based on S-wave spectrum, nuclear magnetic resonance integral area, and effective porosity

    by Liang He, Qiangui Zhang, Xiangyu Fan, Jingyu Zhang, Bozhong Yang, Pengfei Zhao, Yufei Chen, Bowei Yao, Yuxin Geng, Kerui Li

    Hydration of rock during drilling will lead to wellbore instability. The wellbore stability can be effectively improved by accurately evaluating the hydration damage of rocks. However, there are few studies on the hydration damage of volcanic rocks. Based on the S-wave frequency domain, nuclear magnetic resonance and effective porosity, this article establishes a hydration damage variable, and discusses the influence of hydration on the microstructure, acoustic properties and mechanical properties of basalt and tuff. The results show that volcanic rocks produce new cracks during soaking, accompanied by mineral spalling and clay expansion. The correlation between the new hydration damage variable and the existing hydration damage variable is greater than 0.8. At the same time, the stress–strain curve simulated by the hydration constitutive model is in good agreement with the results of uniaxial compression experiments, and the average relative error of the elastic parameters of the two is small. The average relative errors of the peak stress, peak strain, and elastic modulus of basalt are 2.45%, 1.07%, and 1.72%, respectively, and the average relative errors of tuff are 1.49%, 0.45%, and 3.55% respectively. This study provides a new idea for evaluating the hydration damage of volcanic rocks.


  • Open Access

    Field Monitoring and Identification Method for Overflow of Fractured-Vuggy Carbonate Reservoir

    by Qiangui Zhang, Zelin Yan, Xiangyu Fan, Zhilin Li, Pengfei Zhao, Juntian Shuai, Lichun Jia, Lu Liu

    Since carbonate reservoirs develop pores and fractures and have a complex formation pressure system, overflow and even blowout seriously threaten the exploration and development of these kinds of reservoirs. According to the overflow characteristics of fractured-vuggy carbonate reservoirs, a field monitoring and identification method for overflow has been developed. This method is based on the top-down logic framework for early overflow identification, combined with optimized monitoring parameters. The DBSCAN clustering algorithm is used to identify abnormal logging parameters, and thus, a probability weight coefficient of overflow (K) indicated by the abnormal engineering parameters of a gas well can be calculated. K is divided into four early warning response levels of overflow, and the overflow control operation can be made according to the different levels of early warning response. Based on this method, an integrated software system for field monitoring and identification of early overflow is designed. This software system integrates the functions of data collection and management, overflow risk parameter calculation, overflow early warning, and overflow simulation analysis. Finally, according to a case analysis of overflow prediction for a fractured-vuggy carbonate reservoir in Well XX, this method’s prediction stability and accuracy are demonstrated, indicating that it can be used for the overflow early warning in engineering practice.


  • Mechanical properties of basalt, tuff and breccia in the Permian system of Sichuan Basin after water absorption–implications for wellbore stability analysis

    by Qiangui Zhang, Jiawei Ran, Xiangyu Fan, Bozhong Yang, Pengfei Zhao, Yufei Chen, Pinghui Huang, Mingming Zhang, Liang He