PZPengfei Zhao

Pengfei Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pengfei Zhao has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Modified Nonlinear Mohr–Coulomb Failure Criterion for Rocks Under High-Temperature and High-Pressure Conditions

    by Zhuzheng Li, Hongxi Li, Qiangui Zhang, Jiahui Wang, Cheng Meng, Xiangyu Fan, Pengfei Zhao

    In deep, geologically complex environments characterized by high in situ stress and elevated formation temperatures, the mechanical behavior of rocks often transitions from brittle to ductile, differing significantly from that of shallow formations. Traditional rock failure criteria frequently fail to accurately assess the strength of rocks under such deep conditions. To address this, a novel failure criterion suitable for high-temperature and high-pressure conditions has been developed by modifying the Mohr–Coulomb criterion. This criterion incorporates a quadratic function of confining pressure to account for the attenuation rate of strength increase under high confining pressure and a linear function of temperature to reflect the linear degradation of strength at elevated temperatures. This criterion has been used to predict the strength of granite, shale, and carbonate rocks, yielding results that align well with the experimental data. The average coefficient of determination (R2) reached 97.1%, and the mean relative error (MRE) was 5.25%. Compared with the Hoek–Brown and Bieniawski criteria, the criterion proposed in this study more accurately captures the strength characteristics of rocks under high-temperature and high-pressure conditions, with a prediction accuracy improvement of 1.70–4.09%, showing the best performance in the case of carbonate rock. A sensitivity analysis of the criterion parameters n and B revealed notable differences in how various rock types respond to these parameters. Among the three rock types studied, granite exhibited the lowest sensitivity to both parameters, indicating the highest stability in the prediction results. Additionally, the predictive outcomes were generally more sensitive to changes in parameter B than in n. These findings contribute to a deeper understanding of rock mechanical behavior under extreme conditions and offer valuable theoretical support for drilling, completion, and stimulation operations in deep hydrocarbon reservoirs.


  • Open Access

    Field Monitoring and Identification Method for Overflow of Fractured-Vuggy Carbonate Reservoir

    by Qiangui Zhang, Zelin Yan, Xiangyu Fan, Zhilin Li, Pengfei Zhao, Juntian Shuai, Lichun Jia, Lu Liu

    Since carbonate reservoirs develop pores and fractures and have a complex formation pressure system, overflow and even blowout seriously threaten the exploration and development of these kinds of reservoirs. According to the overflow characteristics of fractured-vuggy carbonate reservoirs, a field monitoring and identification method for overflow has been developed. This method is based on the top-down logic framework for early overflow identification, combined with optimized monitoring parameters. The DBSCAN clustering algorithm is used to identify abnormal logging parameters, and thus, a probability weight coefficient of overflow (K) indicated by the abnormal engineering parameters of a gas well can be calculated. K is divided into four early warning response levels of overflow, and the overflow control operation can be made according to the different levels of early warning response. Based on this method, an integrated software system for field monitoring and identification of early overflow is designed. This software system integrates the functions of data collection and management, overflow risk parameter calculation, overflow early warning, and overflow simulation analysis. Finally, according to a case analysis of overflow prediction for a fractured-vuggy carbonate reservoir in Well XX, this method’s prediction stability and accuracy are demonstrated, indicating that it can be used for the overflow early warning in engineering practice.


  • Open Access

    Mechanical Properties of Lamellar Shale Considering the Effect of Rock Structure and Hydration from Macroscopic and Microscopic Points of View

    by Qiangui Zhang, Lizhi Wang, Pengfei Zhao, Xiangyu Fan, Feitao Zeng, Bowei Yao, Liang He, Simin Yang, Yang Feng

    It is well known that the effect of shale hydration causes wellbore instability due to water phase invasion of drilling fluid to lamellar shale rich formations. This is because of that the mechanical properties (compressive strength, elastic modulus, etc.) of lamellar shale surrounding the borehole, which is rich in clay minerals, will decrease significantly after hydration. In this study, using the lamellar shale in the continental stratum of the southern Ordos Basin, the mechanical properties of lamellar shale were studied by compression tests considering the effect of lamellar structure and hydration from a macroscopic point of view. In addition, the mechanical mechanism was discussed combined with the CT scanning tests results from a microscopic point of view. The results demonstrate the following points. Lamellar shale has stronger anisotropy than bedding shale, the compressive strength (deviatoric stress) and elastic modulus of lamellar shale are both lower than those of bedding shale, and it is more prone to tension fracture. With the increase in the angle (β) between the lamina and the axial direction from 0° to 90°, the compressive strength of lamellar shale decreases when β < 30° and then increases, the elastic modulus of lamellar shale decreases greatly when β < 30° and then tends to flatten. With the increase in hydration time, the compressive strength and elastic modulus of lamellar shale both gradually decrease, and the rates of their decrements reduce. The mechanical properties of lamellar shale are more affected by hydration than those of bedding shale. The hydration of lamellar shale leads to the formation of new fractures and the expansion of existing fractures in the junction area between the laminae and rock matrix, resulting in easy tension fracture along the laminae of shale.


  • Open Access

    The Influence of Lamina Density and Occurrence on the Permeability of Lamellar Shale after Hydration

    by Pengfei Zhao, Xingxing Wang, Xiangyu Fan, Xingzhi Wang, Feitao Zeng, Mingming Zhang, Fan Meng, Wen Nie

    The characteristics of laminae in lamellar shale oil reservoirs have important influences on reservoir parameters, especially permeability. In order to explore the influence of lamina density and occurrence on the permeability of lamellar shale after hydration, we studied the lamellar shale in the Chang 7 member of the Yanchang Formation of Triassic in Ordos Basin. By comparing the permeability of bedding shale and lamellar shale with different densities of laminae, it was found that the permeability anisotropy of lamellar shale was stronger. In the direction parallel to the lamina, the permeability increased approximately linearly with an increase in lamina density. The effect of hydration on rock micropore structure and permeability was studied by soaking shale in different fluids. Most of the microfracture in the lamellar shale was parallel to the lamina direction, and hydration led to a widening of the microfracture, which led to the most obvious increase in permeability parallel to the lamina. Collectively, the research results proved that lamina density, occurrence, and hydration have a significant influence on the permeability anisotropy of lamellar shale.