GWGuanshi Wang

Guanshi Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guanshi Wang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    MRV-YOLO: A Multi-Channel Remote Sensing Object Detection Method for Identifying Reclaimed Vegetation in Hilly and Mountainous Mining Areas

    by Xingmei Li, Hengkai Li, Jingjing Dai, Kunming Liu, Guanshi Wang, Shengdong Nie, Zhiyu Zhang

    Leaching mining of ion-adsorption rare earths degrades soil organic matter and hampers vegetation recovery. High-resolution UAV remote sensing enables large-scale monitoring of reclamation, yet vegetation detection accuracy is constrained by key challenges. Conventional three-channel detection struggles with terrain complexity, illumination variation, and shadow effects. Fixed UAV altitude and missing topographic data further cause resolution inconsistencies, posing major challenges for accurate vegetation detection in reclaimed land. To enhance multi-spectral vegetation detection, the model input is expanded from the traditional three channels to six channels, enabling full utilization of multi-spectral information. Furthermore, the Channel Attention and Global Pooling SPPF (CAGP-SPPF) module is introduced for multi-scale feature extraction, integrating global pooling and channel attention to capture multi-channel semantic information. In addition, the C2f_DynamicConv module replaces conventional convolutions in the neck network to strengthen high-dimensional feature transmission and reduce information loss, thereby improving detection accuracy. On the self-constructed reclaimed vegetation dataset, MRV-YOLO outperformed YOLOv8, with mAP@0.5 and mAP@0.5:0.95 increasing by 4.6% and 10.8%, respectively. Compared with RT-DETR, YOLOv3, YOLOv5, YOLOv6, YOLOv7, yolov7-tiny, YOLOv8-AS, YOLOv10, and YOLOv11, mAP@0.5 improved by 6.8%, 9.7%, 5.3%, 6.5%, 6.4%, 8.9%, 4.6%, 2.1%, and 5.4%, respectively. The results demonstrate that multichannel inputs incorporating near-infrared and dual red-edge bands significantly enhance detection accuracy for reclaimed vegetation in rare earth mining areas, providing technical support for ecological restoration monitoring.


  • Open Access

    Evolution of Water-Conducting Fracture in Weakly Cemented Strata in Response to Mining Activity: Insights from Experimental Investigation and Numerical Simulation

    by Quanhui Liu, Chenyao Zhou, Dan Ma, Yong Liu, Guanshi Wang, Zhen Huang

    The accurate prediction of the vertical extent of water-conducting fracture (WCF) zones in weakly cemented strata is particularly significant in preventing and controlling water hazards in western coal mines. The evolution of fractures in weakly cemented strata affected by mining disturbances was comprehensively analyzed by physical similarity models, numerical simulations, and field investigations. Results indicated that the development progress of water-conducting fractures can be divided into three phases: initial slow generation, subsequent rapid development, and eventual stabilization. The numerical simulation results revealed that in the initial stage of working face mining, the development of the plastic zone is limited, and there is minimal failure in the overlying strata; therefore, fractures are slowly produced without penetrating through the strata. When the plastic zone fully encompasses the entire main roof, it triggers severe shear failure in the overlying strata, resulting in rapid fracture propagation and penetration. Once the fracture height reaches a stable state, there is no further increase in the maximum vertical displacement of key strata, indicating the extensive collapse and compaction of the overburden as well as the stabilization of the fracture heights. A modified prediction equation for WCF in weakly cemented strata was obtained by correcting the traditional empirical formula based on field investigations. This modified prediction equation enhances the accuracy in predicting fracture heights and provides a theoretical reference to address the issue of the inaccurate prediction of the water-conducting fracture height in western mine rock strata.


  • Open Access

    Ion-Exchange Model for the Leaching Process of Ion-Adsorption-Type Rare-Earth Ores Considering the Influence of Anions

    by Ying Huang, Ping Long, Guanshi Wang, Sihai Luo, Yonghui Shi, Chao Zhang, Xiongdong Lan

    Clay minerals have a specific adsorption capability for anions, which increases the amount of net negative charge on the surface, leading to the increased adsorption of rare-earth ions in clay minerals and some change from exchangeable to non-exchangeable. Further, anions show a shielding effect on rare-earth ions. The shielding capacity of anions in the leaching agents for rare-earth ions was measured in this study. The relationship between the solid-phase concentration of rare-earth ions shielded and the anion concentration was consistent with the Langmuir model. Based on the Kerr model describing the exchange of rare-earth ions by ammonium ions, an ion-exchange model considering the shielding influence of anions was proposed. The accuracy of the proposed model was higher than that of the Kerr model. When the leaching agent was ammonium sulfate, the calculation accuracy of XW and AY samples was increased by 1.15% and 5.75%, respectively. The improvement in accuracy positively correlated with the proportion of iron oxides, aluminium oxides, and Kaolin. The established ion-exchange model can provide accurate source and sink terms for the numerical simulation of the leaching process of ion-adsorption-type rare-earth ores.


  • Open Access

    The Steady Seepage Line Equation of Ionic Rare Earth Ore (IREO) In Situ Leached with Long Strip Bare Feet and Its Application

    by Yong Gui, Nana Li, Sihai Luo, Guanshi Wang

    Without a reliable design method for the leaching and seepage step of in situ leaching (ISL), problems such as low comprehensive resource recovery rate and frequent geological disasters such as landslides are prominent. This study established a simplified “liquid injection-collection” plane model of ISL with a linear barefoot type rare earth mine as the research object. The steady seepage line equation was derived based on groundwater dynamics and the Dupuit assumption. Then, engineering verification and calculation error analysis were performed. The seepage line equation is expressed as a piecewise function, where the seepage line in the liquid injection area is the upper half of the ellipse line, and the one in the non-liquid injection area is a parabola. The calculation error increases along the flow field direction. The seepage gradient, bedrock gradient, liquid injection range, and relative permeability coefficient have limited influence on the calculation error of the equation. The seepage line equation can be fairly applied in ISL. The seepage line equation can provide a theoretical basis for the “prior prediction (design)” of the “liquid injection/collection” leaching and seepage process in ISL.


  • Open Access

    Decoupling Method for the Convective-Dominated Leaching Process of Ion-Adsorption-Type Rare-Earth Ores

    by Ying Huang, Ping Long, Guanshi Wang, Sihai Luo

    Ion-adsorption-type rare-earth ores (IATREOs) that have experienced granite weathering have good permeability, and their leaching process involves the solute transport problem, which is dominated by convection. Because of the oscillation and dispersion errors of existing numerical methods for solving the convective-dominated solute transport equation, the results have low precision in the twin leaching process. In this paper, the convection–dispersion equation is decoupled into the dispersion equation, the convection equation, and the source-sink equation; the Crank–Nicolson and implicit difference methods are used to solve the dispersion equation and the source-sink equation, respectively. The solution of the convection equation is achieved on the basis of its physical interpretation. Therefore, a decoupling method for the convective-dominated solute transport equation is established. In comparison to the two examples with analytical solutions, the calculation errors of the method established in this paper are less than 2.00%, and it can solve the oscillation and dispersion problems. The rationality of the method is further demonstrated through the column leaching experiment of IATREOs. In comparison to the test results, the coefficients of determination of the breakthrough curves of rare-earth ions and ammonium ions calculated by the proposed method are all greater than 0.850, and the peak concentration error of rare-earth ions is less than 7.00%. This indicates that the proposed method can simulate the leaching process well. Furthermore, by combining the multiple/half method and the dichotomy method, an optimization method for determining the leaching agent amount was established to analyze the relationship between the leaching agent and the ratio of dispersion to pillar length. The results can provide a solution that can be used to mine IATREOs from experience to theory.


  • Open Access

    Study on the Erosion Morphology of Cohesive Soil under the Vertical Impact of a High-Pressure Moving Water Jet

    by Jian Liu, Xiongdong Lan, Guanshi Wang, Sihai Luo, Zhipeng Yang

    In the in situ leaching process of ionic rare earth ore, high-pressure moving water jet technology has been applied to improve floor leakage problems. However, it has been found that the morphology of the erosion surface formed by a moving water jet cannot be accurately predicted. The range of the erosion surface has an important influence on the stability of liquid collection engineering and the liquid collection rate of rare earth resources, which is an important basis for the design of liquid collection engineering. To study this, soil-breaking tests using high-pressure moving water jets for a Pingnan mine were conducted. The influences of jet pressure and nozzle moving speed on soil-breaking morphology were analysed. The mechanism of erosion surface formation was revealed by erosion theory, and a method of predicting the erosion surface geometry based on jet pressure and nozzle speed is proposed. The results show that, in the jet pressure range of 5~10 MPa, with increases in jet pressure and decreases in nozzle speed, the geometric shape of the erosion surface tends to expand, and these parameters have no effect on the morphological characteristics of the erosion surface. In the soil-breaking process, the erosion speed decreases with increases in jet distance. As the nozzle speed becomes greater, the degree of the attenuation of erosion speed at a given jet pressure also becomes greater. Soil-breaking depth has a quadratic relationship with jet pressure and a 0.5 power function relationship with nozzle speed. The geometry of the erosion surface has self-similarity and can be divided into straight and curved sections. Accordingly, an empirical formula of the erosion surface geometric shape is proposed. The error of predicting the soil-breaking depth is less than 11%, which can provide a reference for engineering applications.