RFRobert J. W. Frost

Robert J. W. Frost

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Robert J. W. Frost has a total of 156 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermal diffusivity of ion-irradiated uranium mononitride

    by Elina Charatsidou, Angus Wylie, Nils Wikström, Maria Giamouridou, Riley Moeykens, Robert J.W. Frost, Ericmoore Jossou, Michael P. Short, Pär Olsson

  • Open Access

    Influence of Mg content on microstructure and mechanical properties of lean (< 1 wt.%) powder-mixed Zn–Mg alloys processed by PBF-LB

    by Himesha Abenayake, Robert J.W. Frost, Vitalii Shtender, Cecilia Persson, Francesco D’ELia

  • Wafer-scale integration of piezo- and ferroelectric Al 0.64 Sc 0.36 N thin films by reactive sputtering

    by Sanjay Nayak, Venkata Raveendra Nallagatla, Ravindra Singh Bisht, Dmytro Solonenko, Demian Henzen, Washim Reza Ali, Carla Maria Lazzari, Robert Jw Frost, Andrea Serafini, Davide Codegoni, et al.

    Large-area deposition of aluminum-scandium-nitride (Al 1 −x Sc x N) thin films with higher Sc content ( x ) remains challenging due to several issues, such as abnormal orientation growth, stress control, and the undesired crystal phase. These anomalies across the wafer hinder the development of high scandium-content AlScN films, which are critical for microelectromechanical systems (MEMS) applications. In this study, we report on the sputter deposition of Al 0.64 Sc 0.36 N thin films from a 304 mm diameter Al 0.64 Sc 0.36 alloy target on 200 mm Si (100) wafers, achieving an exceptionally high deposition rate of 8.7 μ m h −1 with less than 1% abnormally oriented grains and controllable stress tuning. Comprehensive microstructural and electrical characterizations confirm the superior growth of high-quality Al 0.64 Sc 0.36 N films with exceptional wafer-averaged piezoelectric coefficients ( d 33 ,f = 15.62 pm V −1 and e 31 ,f = −2.9 C m −2 ) due to low point defects density and grain mosaicity. This is accomplished through the implementation of an optimized seed layer and a refined electrode integration strategy, along with optimal process conditions. The wafer yield and device failure rates are analyzed and correlated with the average stress of the films and their stress profiles along the diameter. The resulting films demonstrate excellent uniformity in structural, compositional, and piezoelectric properties across the entire 200 mm wafer, underscoring their strong potential for next-generation MEMS applications.

  • Open Access

    Thermal Diffusivity of Ion-Irradiated Uranium Mononitride

    by Elina Charatsidou, Angus P. C. Wylie, Nils Wikström, Maria Giamouridou, Riley Moeykens, Robert J.W. Frost, Ericmoore Jossou, Michael Short, Pär Olsson

    Uranium mononitride is a candidate fuel for advanced fast reactors due to its high fissile density and high thermal conductivity. However, its thermophysical property changes due to both chemical impurities and irradiation-induced damage, have not been extensively studied. In this work, we investigate the effect of selected fission product species on the thermal properties of UN using ion implantation. Dense UN pellets were implanted with elements representative of solid (Zr, Ba) and gaseous (Kr, Xe) fission products at different fluences. Near-surface chemistry, morphology and microstructure were characterised using scanning electron microscopy and time-of-flight elastic recoil detection analysis. Thermal diffusivity was measured using transient grating spectroscopy, probing the top ~1 μm of the implanted regions, for temperatures up to 670 K. For solid fission product implantation, the thermal diffusivity decreases relative to unimplanted UN and remains stable with temperature, consistent with impurity scattering and implantation-induced damage. In contrast, gaseous fission product implantation leads to a stronger and largely irreversible reduction in diffusivity. Heating and cooling measurements reveal pronounced hysteresis, accompanied by grain-boundary cracking and enhanced surface oxidation after thermal cycling. These observations suggest redistribution and partial release of Kr and Xe to grain boundaries and defects, leading to microstructural degradation that suppresses heat transport. The results highlight clear differences between solid and gaseous fission product effects on thermal properties in uranium mononitride. Additionally, irradiation damage was observed to be the primary contributor to the degradation of thermal diffusivity, while chemical effects are secondary. Lastly, the work demonstrates the usefulness of combining ion implantation and transient grating spectroscopy to study thermophysical behaviour of nuclear fuels, and the capability to separate chemical effects from implanted damage in the degradation of thermal transport.

  • Open Access

    Ion microprobe determination of ex vivo trace element molarities: the LINAEUS code suite

    by Harry James Whitlow, Gyula Nagy, Robert J. W. Frost, Donruedee Toyen, Deepanwita Bose, Aaron McLaughlin, Karen M. Smith, Chris G. Ryan, Alexander Azarov, Andrej Kuznetsov, et al.

    LINAEUS: a code for determination of CHNO composition in histological tissue sections to improve quantitative PIXE elemental analysis.

  • Open Access

    Strain engineering of ScN thin films and its effect on optical, electrical, and thermoelectric properties

    by Arnaud le Febvrier, Sanath Kumar Honnali, Charlotte Poterie, Tiago V. Fernandes, Robert Frost, Vladyslav Rogoz, Martin Magnuson, Fabien Giovannelli, Joaquim P. Leitão, Jean Francois Barbot, et al.

    Scandium nitride (ScN) is a cubic NaCl-structured, degenerate, narrow-bandgap, n-type semiconductor that exhibits remarkable semiconducting, thermoelectric and plasmonic properties. However, its properties are sensitive to several types of defects, such as crystal defects, morphology, intentional or unintentional doping. For the purpose of reducing the deposition temperature of ScN, a series of films were deposited in the temperature range of 250–850 °C using a high-power impulse magnetron sputtering technique. While the stoichiometry and crystal structure remained unaffected in the sample series, the optical and electrical properties were affected when the temperature was decreased. Using in-depth XRD, optical and electrical characterizations, the effect of strain and dislocations on the semiconductor properties of ScN was evaluated. A reduction in the deposition temperature from 850 °C to 450 °C yielded a slow change in the electrical and optical properties, while a drastic change occurred for the films deposited below 450 °C. The main cause of the deterioration of the electrical transport properties (σ/10 000; n/100, and µ/100) was attributed to a high dislocation density (1011 cm−2) along with a rhombohedral distortion of the ScN cell (α: 90° → 88.6°), which was the main cause of the variation in the electrical transport. The presence of dislocations/crystal defects in the film generated defect states near the edges of the valence and conduction bands, softening the edges and impacting the electron density and mobility. The best thermoelectric properties of ScN were obtained when it was grown at 850 °C and were further modified and altered by strain engineering.


  • Open Access

    Unprecedented B solubility in cubic (Hf,Ta,Ti,V,Zr)B-C-N coatings

    by A. Kretschmer, A. Kirnbauer, R.J.W. Frost, D. Primetzhofer, M. Hans, J.M. Schneider, R. Schuster, P.H. Mayrhofer


  • Open Access

    Charge Transport and Defects in Sulfur-Deficient Chalcogenide Perovskite BaZrS 3

    by Garima Aggarwal, Adeem Saeed Mirza, Stefania Riva, Corrado Comparotto, Robert J. W. Frost, Soham Mukherjee, Monica Morales-Masis, Håkan Rensmo, Jonathan Staaf Scragg

    Exploring the conduction mechanism in the chalcogenide perovskite Ba Zr S 3 is of significant interest due to its potential suitability as a top absorber layer in silicon-based tandem solar cells and other optoelectronic applications. Theoretical and experimental studies anticipate native ambipolar doping in Ba Zr S 3 , although experimental validation remains limited. This study reveals a transition from highly insulating behavior to n -type conductivity (approximately 100 S/cm) in Ba Zr S 3 thin films through annealing in an S -poor environment. Ba Zr S 3 thin films are synthesized via a two-step process: co-sputtering of Ba - Zr followed by sulfurization at 600 ∘ C , and subsequent annealing in high vacuum. Ultraviolet-visible spectroscopy measurements reveal a red shift of approximately 100 meV in the band gap concurrent with sample-color darkening after vacuum annealing. The increase in defect density from the order of 10 17 to 10 21 cm − 3 with vacuum annealing, coupled with the low activation energy (approximately 8 meV), and the n -type character of the defects, strongly suggests that sulfur vacancies ( V S ) are responsible for the n -type doping, in agreement with theoretical predictions. Temperature-dependent Hall measurement shows that phonon scattering governs charge transport at room temperature in Ba Zr S 3 films and that S vacancies are shallow donor defects acting as a weak impurity metal. The shift of the valence-band maximum (VBM) with respect to the Fermi level, quantified by hard x-ray photoelectron spectroscopy ( Ga K α , 9.25 keV), further corroborates the induced n type of conductivity in annealed samples. Our findings indicate that vacuum annealing induces V S defects that dominate charge transport, resulting in n -type conductivity in Ba Zr S 3 under S -poor conditions. These discoveries will inform important design choices, such as selecting appropriate contact materials, for integrating Ba Zr S 3 into solar cell structures or other devices.


  • Open Access

    An autofocusing system for nuclear microprobes—based on real-time image processing and numerical optimization

    by Dimitrios Papaioannou, Gyula Nagy, Daniel Primetzhofer, Robert J. W. Frost

    Ion beam focusing for a nuclear microprobe is typically achieved by an operator adjusting the currents supplied to a series of quadrupole magnets, while observing the resulting changes in size and shape of the beam spot via an optical microscope image. This process requires an experienced operator to implement in a reasonable time frame. The present work demonstrates an automated, software-based solution to ion beam focusing. The software determines parameters describing the size and shape of the beam spot in real time, by processing images captured from the microscope. These parameters then provide feedback to a minimisation routine based on the downhill simplex algorithm, which controls the currents supplied to the quadrupole focusing magnets. The minimal beam spot size is achieved in less than three minutes, regardless of the experience of the human operator. The physical microprobe system, on which the software is demonstrated, is not presently capable of achieving spot sizes much below 3 µm, and thus the performance of the software below this limit is still to be determined. Within the limits tested, however, the software demonstrates consistent performance, and greatly enhances the accessibility of the microprobe for less experienced users.